UT-60408F series are unmanaged industrial Ethernet switches. It supports up to 12 ports, which included 4 Gigabit fiber ports(SC/ST/FC/SFP slot); this enhances the networking flexibility. This switch is low power consumption; the fanless design prevent it from noise interference; at the same time, the operating temperature range is from -40~85℃; and the switch is with good EMC compatibility. These make the switch provides safe and reliable solution for industrial automation, intelligent transportation, video monitoring, and other industrial application networking access.

• Supports full-duplex or half-duplex, auto negotiation
• Auto 10/100Base-T(X), auto MDI/MDI-X
• Built-in store-and-forward, 8K buffer, supports multiple protocols
• Operating temperature: -40~85℃
• IP40 protection
• Relay output auto alarm function
• dual power input, overload and reverse polarity protection
• Compatible with telecom standard, MTBF>300,000 hours

>>Standards

IEEE 802.3, IEEE 802.3u

>>Ports

Fiber port: 100Base-FX(SC/FC/ST)

1000Base-X(SC/FC/ST)

RJ-45 port: 10/100Base-T(X), auto MDI/MDI-X

>>Transmission Distance

Cat.5e: 100m

>>Fiber Patch Cord

Single-mode: 1,310nm 20/40/60Km

1,550nm 20/40/60/80/100/120Km

Multi-mode: 1,310nm 2Km

>>Switching Performance

Forwarding rate:

100M ports: 148,810pps

1000M ports: 1,488,095pps

Transmission mode: store-and-forward

MAC address buffer: 8K

Switching bandwidth: 9.6G

>>Power Requirement

Voltage input: with optional 12/24/48VDC(10.8~52.8VDC) and 110/220VAC(88~264VAC)/50-60Hz or 110/220VDC(88~264VDC)

>>Power Consumption

Fullload: <20W

>>Mechanical Characteristics

IP rating: IP40

Installation: DIN-Rail

Dimension

Size(W×H×D): 150 mm×70mm×120mm

>>Environment

Operating temperature: -40℃~85℃

Storage temperature: -40℃~85℃

Relative humidity: 0~95%(non-condensing)

>>Industrial Standards

EMI: FCC Part 15, CISPR (EN55022) class A

EMS:

IEC(EN)61000-4-2(ESD)

IEC(EN)61000-4-3(RS)

IEC(EN)61000-4-4(EFT)

IEC(EN)61000-4-5(Surge)

IEC(EN)61000-4-6(CS)

IEC 60068-2-27(Shock)

IEC 60068-2-32(Freefall)

Remarks:

1. Single-mode dual-fiber SC port is a standard configuration for 100M optic ports of products above mentioned, with optional ST/FC
2. The suffix “F” in “BNF” means 12/24/48VDC（10.8~52.8VDC）power input;

The suffix “D” in “BND” means 110/220VAC/DC（88~264VAC/DC）dual power input