UT-60008F series are unmanaged industrial Ethernet switches. It supports up to 8 100M ports, plug & play. This switch is low power consumption; the fanless design prevents it from noise interference; the operating temperature range is from -40~85°C. These make it provides safe and reliable solution for industrial automation, intelligent transportation, video transmission, and other industrial application networking.

• Supports up to 8 100Mbps ports
• Supports different Ethernet/fiber ports combination
• Supports full-duplex or half-duplex, auto negotiation
• Auto 10/100Mbps
• Auto MDI/MDI-X
• Built-in store-and-forward, 8k buffer
• Compatible with Telecom standards, MTBF>500,000 hours
• SC connector (with optional ST/FC)
• FAIL relay output auto alarm function
• Redundant dual power input, overload protection

>>Standards

IEEE 802.3

IEEE 802.3u

>>Ports

Fiber port: 100Base-FX（SC/FC/ST）

RJ45 port: 10/100Base-T(X), auto MDI/MDI-X

Transmission distance

Cat.5e: 100m

>>Fiber Patch Cord

Single-mode: 1,310nm 20/40/60Km

1,550nm 20/40/60/80/100/120Km

Multi-mode: 1,310nm 2Km

>>Switching Performance

Forwarding rate: 148,810pps

Transmission mode: store-and-forward

MAC address buffer: 8K

Switching bandwidth: 1.6G

>>Power Requirement

Voltage input: with optional 12/24/48VDC（10.8~52.8VDC）and 110/220V AC(88~264VAC)/50-60Hz or 110/220VDC(88~264VDC), supports redundant dual power input

>>Consumption

Rated power: 15W

>>Mechanical Characteristics

IP rating: IP40

Installation: DIN-Rail/wall-mounted

>>Dimension

Size(W×H×D): 150mm×47.6mm×100mm

>>Environment

Operating temperature: -40℃~85℃

Storage temperature: -40℃~85℃

Relative humidity: 0~95% (non-condensing)

>>Industrial Standards

EMI: FCC Part 15, CISPR (EN55022) class A

EMS:

IEC(EN)61000-4-2(ESD)

IEC(EN)61000-4-3(RS)

IEC(EN)61000-4-4(EFT)

IEC(EN)61000-4-5(Surge)

IEC(EN)61000-4-6(CS)

IEC 60068-2-27(Shock)

IEC 60068-2-32(Freefall)

Remarks：

1. Single-mode dual-fiber SC port is a standard configuration for products above mentioned, with optional ST/FC
2. The suffix “F” in “MNF” means 12/24/48VDC（10.8~52.8VDC）power input;

The suffix “D” in “MND” means 110/220VAC/DC（88~264VAC/DC）dual power input