The TL-7HDAP13000TCS-PoE/DC is a new generation of flagship Wi-Fi 7 high-power outdoor AP launched by TP-LINK, providing 10G network port and 10G optical port for data transmission, and providing DC, standard PoE, and passive PoE power supply modes, providing flexible networking. It can be widely used in outdoor scenarios such as campus playgrounds, squares, parks, stations, and stadiums, providing high-quality wireless coverage.

1. Adopt 11BE wireless technology
Tri-band concurrency, 12908Mbps wireless rate
Support 2.4G/5G1/5G2 tri-band concurrency, 2.4GHz frequency band provides 689Mbps wireless transmission rate, 5GHz-1 frequency band provides 5765Mbps wireless transmission rate, The 5GHz-2 band provides a wireless transmission rate of 2882Mbps and has a built-in omnidirectional high-gain dual-polarization antenna.

2. Professional hardware and software design
Support wireless MESH networking, blind spot signal coverage expansion
is more convenient Through TP-LINK MESH technology, the network can be expanded wirelessly by pressing a button, and some areas can be wired without wiring to achieve wireless signal expansion, which is suitable for small and medium-sized environments with low traffic density, easy to use and unified configuration.

Independent power amplifier circuit to improve transmission power The
external independent power amplifier circuit (PA) and low noise power amplifier receiving circuit (LNA: Low Noise Amplifier) further improve the wireless transmission power, reduce the noise interference of wireless signal reception, and cover a wider range.

Automatic RF Tuning Optimizes Overall Performance
Automatic RF tuning, automatically calculates the neighbor relationship between APs in the network, and automatically adjusts the wireless transmit power and channel based on the real-time interference and load conditions of nearby devices, ensuring that the overall wireless network is always in a high-speed, high-performance operation state.

Intelligently Kick Weak Signal Devices to Improve Wireless Quality
You can set a weak signal strength threshold to intelligently identify, prohibit, and kick devices whose signal strength is lower than the threshold. Prevent weak signal devices from slowing down network efficiency and improve the roaming quality of the entire wireless network.

Intelligent roaming technology improves the wireless experience of each user
The intelligent roaming technology based on the 802.11kvr protocol helps mobile phones, pads, computers and other terminal devices to automatically connect to the AP with the best signal quality in the high-density environment of multiple APs such as conference rooms, office areas, bars, and KTVs, and realizes fast roaming within 50ms. Effectively improve the user experience of each user and the overall performance of the wireless network.

3. High-performance interface
10G network port, higher speed Internet access
The 10G network port is adopted, and the speed is greatly increased compared with the gigabit network port, so that the wired interface is no longer the bottleneck of wireless transmission, and meets the high-speed Internet access needs in multi-user and high-bandwidth scenarios.

10G SFP optical port, more convenient direct connection
One 10G SFP fiber module slot is provided to install SFP fiber module. Optical fiber is directly connected to the AP, which can effectively solve the cabling problem when the AP is far away from the equipment center.

4.the construction is convenient, the management is simple, the maintenance is worry-free A variety of power supply methods,standard PoE power supply, more convenient construction
Standard PoE power supply, no external power supply, each AP only needs one network cable, convenient construction.
Note: It needs to be used with PoE power supply equipment such as PoE switches and standard PoE power injectors.

b. Passive PoE power supply, power supply transmission distance up to 100 meters
Support Passive PoE power supply, power supply transmission distance up to 100 meters, solve the problem of difficult power access in outdoor environment, and flexibly distribute points according to needs.

c. Support 12V~53.5V DC power supply, no need to purchase PoE switches, and reduce networking costs.
Note: This product ships DC power adapter and non-standard PoE power supply module.

A variety of installation methods
support pole and wall mounting at the same time, and the horizontal and vertical angles can be adjusted, which is simple to install and adapts to more scenarios.

IP68 Dustproof and Waterproof
It provides IP68 dustproof and waterproof capabilities, and can work normally in extreme environments as low as -30°C and as high as 65°C, without fear of wind, sun, rain and snow.

Unified management of TP-LINK commercial cloud platform
Remote centralized management of multiple projects, efficient and convenient
Real-time monitoring of equipment status, timely and accurate alarms
Graphical data analysis, clear at a glance
Support mobile APP, management anytime, anywhere

Independent Hardware Protection Circuit, Automatic Recovery of AP Abnormal Work
Built-in independent hardware protection circuit, when the AP works abnormally, it can be automatically restored without manual intervention, ensuring stable Wi-Fi signal coverage and more worry-free maintenance in the later stage.

• Next-generation Wi-Fi 7 technology
• BE13000 three-band concurrency, three radios are connected at the same time, and the theoretical maximum wireless rate can reach 12908Mbps, which is twice the number of ordinary dual-band APs
• 1 x 10G SFP+ port, 1 x 10G Ethernet port, providing 10G high-speed wired connection
• Professional tri-band antenna design, built-in 5dBi omnidirectional antenna, covering a radius of up to 500 meters
• External independent FEM device improves wireless signal coverage and reception quality
• The shell design of the professional room can reach IP68 for waterproof and dustproof, and the working temperature can reach -30°C~65°C, which can adapt to various harsh environments
• It supports 802.11kvr and intelligent roaming technology
• Automatic RF tuning optimizes overall performance
• Automatically rejects weak signal devices to avoid dragging down the entire network and improve wireless network performance
• Supports 4K QAM transmission technology
• DC, 802.3bt/at PoE and Passive PoE power supply, flexible distribution
• Pole/wall mounting, easy maintenance
• Centralized management of TP-LINK commercial network cloud platform is supported
• Support TP-LINK business cloud APP remote view and management

Hardware specifications

Software Specifications (FAT AP Mode)