UT-61005F series are 5-port simple managed industrial Ethernet switches. It provides 4 10/100Base-T(X) RJ-45 ports, 1 optional RJ-45 port or fiber port, plug & play; 1 console port supports CLI management. This switch is low power consumption; the fanless design prevents it from noise interference; the operating temperature range is from -40℃~85℃, and it is with good EMC compatibility. These make the switch provides safe and reliable solution for industrial automation, intelligent transportation, video monitoring, and other industrial application networking access.

• 5x10/100Base-T(X) ports, with optional 4 100M Ethernet ports and 1 fiber port
• WEB management, supports CLI, RSTP, SNTP, HDCP client, visitor management, system management
• Supports full-duplex or half-duplex, auto negotiation
• Supports 10/100Base-T(X), auto detection, auto MDI/MDI-X
• Operating temperature: -40~85℃
• Supports DIN-Rail and wall mounted installation
• IP30 protection, low consumption, fanless design

>>Standards & Management
Standards: IEEE 802.3, IEEE 802.3u
Management: SNMP v1/v2c/v3, CLI(console, telnet), WEB management, supports RSTP, port management, LLDP, SNTP, DHCP client, visitor management, system management

>>Ports
RJ-45 port: 4 x 10/100Base-TX ports, auto detection, full/half duplex, auto MDI/MDI-X

With optional 1 10/100Base-TX port or 100Base-FX port(SC/ST/FC)

>>Fiber module
Single-mode: 1,310nm 20/40/60Km
1,550nm 20/40/60/80/100/120Km
Multi-mode: 1,310nm 2Km

>>Transmission Distance
RJ-45: 100m

>>Switching Performance
Forwarding rate: 148,810pps
Transmission mode: store-and-forward
MAC address buffer: 1K
Switching bandwidth: 1.2G
LED indicators: PWR, FDX(only for model with fiber port)

>>Power Requirement
Voltage input: 12/24/48 VDC (10.8 to 52.8VDC)
Power consumption: 150mA@24Vmax

>>Mechanical Characteristics
IP rating: IP30
Weight: 680g
Installation: DIN-Rail or wall-mounted

>>Industrial Standards
EMI : FCC Part 15, CISPR (EN55022) class A
EMS: IEC(EN)61000-4-2(ESD)
IEC(EN)61000-4-3(RS)
IEC(EN)61000-4-4(EFT)
IEC(EN)61000-4-5(Surge)
IEC(EN)61000-4-6(CS)

IEC 60068-2-27(Shock)

IEC 60068-2-32(Freefall)

Remarks:

1. Single-mode fiber SC port is a standard configuration for products above mentioned, with optional ST/FC
2. The suffix “F” in “MNF” means 12/24/48VDC（9.6~57.6VDC）power input;

The suffix “D” in “MND” means 110/220VAC/DC（88~264VAC/DC）dual power input