All
      0
      Cart
      • Popular
      • Newest
      • Most reviews

      Laser Sensor

      Laser Sensor
      ModelDescriptionBrandLeadingConditionPriceAction
      Laser Sensor
      HG-SC101-P
      		In StockNew Sealed Under Guarantee
      LS-501P
      Regulatory compliance EMC Directive, RoHS Directive Applicable amplifiers LS-501(P), LS-501(P)-C2 (Note：When using the thru-beam type LS-H101□ or LS-H102□, do not set the receiving light sensitivity (gctL) of the applicable LS-500 series amplifier to level 2 or less. This is because there is a possibility of sensing becoming unstable.) Sensing range:H-SP mode 1m 3.281 ft (Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.) (Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m 0.033 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable LS-500 series amplifiers, leave an adequate safety margin when setting the threshold.)
      		In StockNew Sealed Under Guarantee
      EX-L291-P
      		In StockNew Sealed Under Guarantee
      EX-L261-P
      		In StockNew Sealed Under Guarantee
      EX-L262-P
      		In StockNew Sealed Under Guarantee
      HG-C1400
      		In StockNew Sealed Under Guarantee
      HG-C1030
      		In StockNew Sealed Under Guarantee
      HG-C1050
      		In StockNew Sealed Under Guarantee
      HG-C1100
      		In StockNew Sealed Under Guarantee
      HG-C1200
      		In StockNew Sealed Under Guarantee
      HG-C1030-P
      		In StockNew Sealed Under Guarantee
      HG-C1050L-P
      		In StockNew Sealed Under Guarantee
      HG-C1200-P
      		In StockNew Sealed Under Guarantee
      HG-SC113
      		In StockNew Sealed Under Guarantee
      HG-SC101
      		In StockNew Sealed Under Guarantee
      LS-H101
      Regulatory compliance EMC Directive, RoHS Directive Applicable amplifiers LS-501(P), LS-501(P)-C2 (Note：When using the thru-beam type LS-H101□ or LS-H102□, do not set the receiving light sensitivity (gctL) of the applicable LS-500 series amplifier to level 2 or less. This is because there is a possibility of sensing becoming unstable.) Sensing range:H-SP mode 1m 3.281 ft (Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.) (Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m 0.033 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable LS-500 series amplifiers, leave an adequate safety margin when setting the threshold.)
      		In StockNew Sealed Under Guarantee
      LS-H102
      Regulatory compliance EMC Directive, RoHS Directive Applicable amplifiers LS-501(P), LS-501(P)-C2 (Note：When using the thru-beam type LS-H101□ or LS-H102□, do not set the receiving light sensitivity (gctL) of the applicable LS-500 series amplifier to level 2 or less. This is because there is a possibility of sensing becoming unstable.) Sensing range:H-SP mode 1m 3.281 ft (Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.) (Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m 0.033 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable LS-500 series amplifiers, leave an adequate safety margin when setting the threshold.)
      		In StockNew Sealed Under Guarantee
      LS-H901
      Regulatory compliance EMC Directive, RoHS Directive Applicable amplifiers LS-501(P), LS-501(P)-C2 (Note：When using the thru-beam type LS-H101□ or LS-H102□, do not set the receiving light sensitivity (gctL) of the applicable LS-500 series amplifier to level 2 or less. This is because there is a possibility of sensing becoming unstable.) Sensing range:H-SP mode 1m 3.281 ft (Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.) (Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m 0.033 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable LS-500 series amplifiers, leave an adequate safety margin when setting the threshold.)
      		In StockNew Sealed Under Guarantee
      LS-H201
      Regulatory compliance EMC Directive, RoHS Directive Applicable amplifiers LS-501(P), LS-501(P)-C2 (Note：When using the thru-beam type LS-H101□ or LS-H102□, do not set the receiving light sensitivity (gctL) of the applicable LS-500 series amplifier to level 2 or less. This is because there is a possibility of sensing becoming unstable.) Sensing range:H-SP mode 1m 3.281 ft (Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.) (Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m 0.033 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable LS-500 series amplifiers, leave an adequate safety margin when setting the threshold.)
      		In StockNew Sealed Under Guarantee
      LS-501
      Regulatory compliance EMC Directive, RoHS Directive Applicable amplifiers LS-501(P), LS-501(P)-C2 (Note：When using the thru-beam type LS-H101□ or LS-H102□, do not set the receiving light sensitivity (gctL) of the applicable LS-500 series amplifier to level 2 or less. This is because there is a possibility of sensing becoming unstable.) Sensing range:H-SP mode 1m 3.281 ft (Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm 3.937 × 3.937 in) as the object.) (Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m 0.033 ft away. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicable LS-500 series amplifiers, leave an adequate safety margin when setting the threshold.)
      		In StockNew Sealed Under Guarantee
      1.297133s