| Electromagnetic heaters |
Single-phase Digital 2.5KW(Half-bridge control board) | Digital 2.5KW Electromagnetic Heating Control Board Manual Electrical specifications of the productRated voltage frequency:AC 220V / 50Hz Voltage adaptation range:100V～260V 3.Rated power: 2.5KW (20%~100% i.e. 0.5~2.5KW adjustable), rated working current: 10~12AEnvironmental adaptability Temperature: -20°C~50°C Humidity: ≤95% Basic performance overviewVoltage and power characteristics: 210~260V constant power output; Thermal efficiency≥95%; IGBT overheat protection temperature: 85±5°C; Working frequency: 5~40KHz; Industrial-grade high-reliability AVR high-speed computing processor, half-bridge series resonance; Using highly reliable digital phase-locked loop control technology, digital stepless adjustment realizes 20%~100% adjustable power, and is also compatible with 0~5VDC or 4~20mA analog PID control power output; It has a completely electrically isolated soft start control interface (short circuit start/disconnect stop), which is convenient to connect with the thermostat, and there is also a 12V/24V input start/stop mode control interface, which is convenient to connect with various solid-state relays (there is a voltage input to work, on the contrary, stop heating, when using this function, the soft start interface will be empty, and the short circuit ring needs to be removed), the control response speed is fast, and the start time is It has the protection function of heating coil short circuit and open circuit, 130% overload and no-load instantaneous protection function, and the protection response time is ≤2uS; The coil has wide compatibility and can be compatible with the same model products of other companies; Strong anti-interference ability, 30 controllers can be controlled to start/stop at the same time on the same heating body without interfering with each other; Open application platform, users can automatically read important parameters such as current, frequency, phase difference, temperature with our special digital programming display, and can also set various application parameters according to needs, making installation and debugging more simple and convenient; You can set 1~255 days of working time, and it will be automatically turned off after the timer is completed, and you need to enter the password to restart; Industrial-grade components, 100% tested by high temperature aging, to ensure long-term continuous and reliable work in 50°C industrial environment for 24 hours, average trouble-free service life: ≥50000Hrs; Factory standard configuration: control board radiator and cooling fan integration, 1 set of indicator board; Physical size: length 195mm * width 120mm * height 100mm (including fan);The advantages of the company's electromagnetic heating plateThe power supply adopts a wide voltage design, with a constant power output of 210V~260V, which is especially suitable for the occasion of large power grid voltage fluctuations; Adopt two original imported IGBT half-bridge series resonant structure, product quality is more stable, anti-interference ability is stronger, and the board is not burned for a long time continuous work; The potentiometer on the board can be changed to 0~5VDC or 4~20mA analog PID control interface to control the power output, so that the heating temperature control is more accurate, and it is more suitable for the production of various heating equipment; Add 12V/24V voltage control interface to facilitate the use of solid state relay control; The introduction of advanced production technology from Japan, the products have undergone strict functional tests and aging tests before leaving the factory, and the quality has been effectively guaranteed, and the repair rate in 2017 is 0.68%; National unified warranty for 1 year, lifelong maintenance of products, full technical guidance and service, so that you have no worries!System wiring description and schematic diagramThree indicators, Power: power indicator, Work: work light, Failure: fault light. When the power and work are on and the Failure is off, and when the circuit fails, the Failure is on. Soft Boot This interface is a soft start/stop control interface, which works when it is short-circuited and stops when it is disconnected (the short-circuit piece of the next socket must be removed when using the interface control). AC-L and AC-N are 220V power inputs, and OUT1 and OUT2 are output terminals connected to heating coils. Coil reference parameters: (please refer to the comparison table below for details) Mica winding glass fiber braided high-temperature resistant cable, cross-section national standard 4mm² inductance is 100~150uH, about 20~25m (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~25mm, flat coil: 10~15mm, rated working current: 10~12A, general working frequency: 10K~20KHZ. The potentiometer can adjust the power size, which is large clockwise and small on the contrary. (Suitable for every product) | | In Stock | New Sealed Under Guarantee | | |
Single-phase 2.5KW(Half-bridge Controller) | Digital 2.5KW Electromagnetic Heating Control Board Manual Electrical specifications of the productRated voltage frequency:AC 220V / 50Hz Voltage adaptation range:100V～260V 3.Rated power: 2.5KW (20%~100% i.e. 0.5~2.5KW adjustable), rated working current: 10~12AEnvironmental adaptability Temperature: -20°C~50°C Humidity: ≤95% Basic performance overviewVoltage and power characteristics: 210~260V constant power output; Thermal efficiency≥95%; IGBT overheat protection temperature: 85±5°C; Working frequency: 5~40KHz; Industrial-grade high-reliability AVR high-speed computing processor, half-bridge series resonance; Using highly reliable digital phase-locked loop control technology, digital stepless adjustment realizes 20%~100% adjustable power, and is also compatible with 0~5VDC or 4~20mA analog PID control power output; It has a completely electrically isolated soft start control interface (short circuit start/disconnect stop), which is convenient to connect with the thermostat, and there is also a 12V/24V input start/stop mode control interface, which is convenient to connect with various solid-state relays (there is a voltage input to work, on the contrary, stop heating, when using this function, the soft start interface will be empty, and the short circuit ring needs to be removed), the control response speed is fast, and the start time is It has the protection function of heating coil short circuit and open circuit, 130% overload and no-load instantaneous protection function, and the protection response time is ≤2uS; The coil has wide compatibility and can be compatible with the same model products of other companies; Strong anti-interference ability, 30 controllers can be controlled to start/stop at the same time on the same heating body without interfering with each other; Open application platform, users can automatically read important parameters such as current, frequency, phase difference, temperature with our special digital programming display, and can also set various application parameters according to needs, making installation and debugging more simple and convenient; You can set 1~255 days of working time, and it will be automatically turned off after the timer is completed, and you need to enter the password to restart; Industrial-grade components, 100% tested by high temperature aging, to ensure long-term continuous and reliable work in 50°C industrial environment for 24 hours, average trouble-free service life: ≥50000Hrs; Factory standard configuration: control board radiator and cooling fan integration, 1 set of indicator board; Physical size: length 195mm * width 120mm * height 100mm (including fan);The advantages of the company's electromagnetic heating plateThe power supply adopts a wide voltage design, with a constant power output of 210V~260V, which is especially suitable for the occasion of large power grid voltage fluctuations; Adopt two original imported IGBT half-bridge series resonant structure, product quality is more stable, anti-interference ability is stronger, and the board is not burned for a long time continuous work; The potentiometer on the board can be changed to 0~5VDC or 4~20mA analog PID control interface to control the power output, so that the heating temperature control is more accurate, and it is more suitable for the production of various heating equipment; Add 12V/24V voltage control interface to facilitate the use of solid state relay control; The introduction of advanced production technology from Japan, the products have undergone strict functional tests and aging tests before leaving the factory, and the quality has been effectively guaranteed, and the repair rate in 2017 is 0.68%; National unified warranty for 1 year, lifelong maintenance of products, full technical guidance and service, so that you have no worries!System wiring description and schematic diagramThree indicators, Power: power indicator, Work: work light, Failure: fault light. When the power and work are on and the Failure is off, and when the circuit fails, the Failure is on. Soft Boot This interface is a soft start/stop control interface, which works when it is short-circuited and stops when it is disconnected (the short-circuit piece of the next socket must be removed when using the interface control). AC-L and AC-N are 220V power inputs, and OUT1 and OUT2 are output terminals connected to heating coils. Coil reference parameters: (please refer to the comparison table below for details) Mica winding glass fiber braided high-temperature resistant cable, cross-section national standard 4mm² inductance is 100~150uH, about 20~25m (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~25mm, flat coil: 10~15mm, rated working current: 10~12A, general working frequency: 10K~20KHZ. The potentiometer can adjust the power size, which is large clockwise and small on the contrary. (Suitable for every product) | | In Stock | New Sealed Under Guarantee | | |
Single-phase Digital 3KW(Half-bridge control board) | Electrical specifications of the product Rated voltage frequency: AC 220V/50Hz Voltage adaptation range: 100V~260V Rated power: 3KW (power adjustable range is 20~100%), rated working current: 12~14A Adaptability to the environment Temperature: -20°C~50°C Humidity: ≤95% Basic performance overview Voltage and power characteristics: 210~260V constant power output; Thermal efficiency≥ 95%; IGBT overheat protection temperature: 85±5°C; Working frequency: 5~40KHz; Based on 32-bit DSP all-digital processor, half-bridge series resonance; Using highly reliable digital phase-locked loop control technology, digital stepless adjustment, the power can be set through the digital display, and can also be adjusted by external potentiometer, and it is also compatible with 0~5VDC or 4~20mA analog PID to control the power output, and the power is 20%~100% adjustable; It has a fully galvanically isolated soft-start control interface (short-circuit start/disconnect stop) for easy connection with the thermostat, and a 12V/24V input start/stop mode control interface for easy connection with various solid-state relays (there is a voltage input to work, otherwise stop heating, when using this function, the soft-start interface should be empty, and the short-circuit ring needs to be removed)., the control response speed is fast, and the start-up time is It has the protection functions of heating coil short circuit and open circuit, 130% overload and no-load instantaneous protection function, and the protection response time ≤2uS; The coil has wide compatibility and can be compatible with the same model products of other companies; Strong anti-interference ability, 30 controllers can be controlled to start/stop at the same time on the same heating body without interfering with each other; With the open application platform, users can automatically read important parameters such as current, frequency, phase difference, temperature and so on with our special digital programming display, and can also set various application parameters as needed, making installation and debugging more simple and convenient You can set 1~255 days of working time, automatically lock after the timer is completed, you need to enter the password to restart, and you can also set 6 groups of timing on/off according to your needs; Built-in modbus RTU communication protocol, with 485 interface, can be external contact touch screen, can also easily achieve remote control; Using industrial-grade components, 100% of them have been tested by high temperature aging, to ensure 24 hours of continuous and reliable work in the industrial environment of 50°C for a long time, and the average trouble-free service life: ≥50000Hrs; Factory standard configuration: control board radiator and cooling fan integration; Physical size: length 195mm * width 120mm * height 100mm (including fan) The advantages of the company's electromagnetic heating plate The power supply adopts a wide voltage design, with a constant power output of 210V~260V, which is especially suitable for the occasion of large grid voltage fluctuations; Adopting two original imported IGBT half-bridge series resonant structure, the product quality is more stable, the anti-interference ability is stronger, and the continuous work for a long time does not burn the plate; The power can be set by the digital display, and can also be adjusted by an external potentiometer, and it is also compatible with 0~5VDC or 4~20mA analog PID to control the power output, so that the heating temperature control is more accurate, and it is more suitable for the production of various heating equipment; The working time can be set for password locking, which can effectively prevent the problem of difficult collection of project funds, and can also set 6 groups of timed on/off according to the need, which is more intelligent and more convenient to use in areas with peak and valley electricity prices; It comes with 485 interface, which can be touched externally, and can also be easily controlled and centralized, which is conducive to the secondary development of equipment and the comprehensive management of the factory; Add 12V/24V voltage control interface, which is convenient for SSR solid state relay control; The national unified warranty is 1 year, the product is maintained for life, and the whole process of technical guidance and service allows you to have no worries. System wiring description and schematic diagram Two indicator lights, one indicator on the board + external DC 12V working indicator, always on when working normally, flashing when not working. Soft Boot This interface is a soft start/stop control interface, which works when it is short-circuited and stops when it is disconnected (the short-circuit piece of the next socket must be removed when using this interface for control). AC-L and AC-N are 220V power inputs, and OUT1 and OUT2 are output terminals connected to heating coils. Coil reference parameters: (Please refer to the comparison table below for details). Mica winding glass fiber braided high-temperature resistant cable, cross-section national standard 4mm² inductance is 90~110uH, about 18~22m (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~, flat coil: 10~15mm, quota working current: 12~14A, general working frequency: 10K~20KHZ.25mm The potentiometer can adjust the power size, which is large clockwise and small vice versa. (Suitable for every product) When installing, please pay attention to the heat sink is electrified, hands and other conductive objects should never be touched, and the shell must be reliably grounded. | | In Stock | New Sealed Under Guarantee | | |
Single-phase Simulation 3.5KW(Half-bridge control board) | Electrical specifications of the product Rated voltage frequency: AC 220V/50Hz Voltage adaptation range: 100V~260V Rated power: 3.5KW (power adjustable range is 30~100%) Adaptability to the environment Temperature: -20°C~50°C; Humidity: ≤95%; Basic performance overview Voltage and power characteristics: 210~260V constant power output; Thermal efficiency≥90%; IGBT overheat protection temperature: 85±5°C; Working frequency: 15~30KHz; Half-bridge series resonance; Adopt high-reliability phase-locked loop control technology; It has 12V and 24V input start/stop modes, which is convenient for solid state relay control (there is voltage input to work, otherwise stop heating); It has the functions of short circuit, open circuit protection and no-load detection protection of heating coil; Strong anti-interference ability, on the same heating body, 30 coils work at the same time without interfering with each other; Highly reliable soft start galvanic isolation, multiple controllers can be directly connected to start/stop; Factory standard configuration: control board and radiator integration, 1 industrial indicator light; Physical size: length 225mm * width * height, with additional cooling fan (220V/);220mm110mm150mm The average time between failures is more than 10,000 hours. The advantages of the company's electromagnetic heating plate The power supply adopts a wide voltage design, with a constant power output of 210V~260V, which is especially suitable for the occasion of large grid voltage fluctuations; Adopting two original imported IGBT half-bridge series resonant structure, the product quality is more stable, the anti-interference ability is stronger, and the continuous work for a long time does not burn the plate; It can be customized with 0~5VDC or 4~20mA analog PID control interface to control the power output, make the heating temperature control more accurate, and more suitable for the production of various heating equipment Add 12V and 24V voltage control interfaces, which is convenient for solid state relay control; The introduction of advanced production technology from Japan, the products have undergone strict functional tests and aging tests before leaving the factory, and the quality has been effectively guaranteed, and the repair rate in 2019 is 3.6‰; 1 year of national unified warranty, lifelong maintenance of products, full technical guidance and service, so that you have no worries! System wiring description and schematic diagram Three indicators, power indicator and work light (two work lights, one on the board, one external), power and work at the same time when working normally, when in the state of stop work or protection, the work indicator is flashing; Soft Boot This terminal is used to start/stop. It works when it is closed, and stops when it is disconnected. Note: There is a short-circuit piece on the socket next to the green socket (Soft Boot terminal) at the factory, the socket has the same function as the green socket, if the green socket is used for control, the short-circuit piece must be removed, if the short-circuit piece is not removed, there is no need to connect the green socket, and the control board will be automatically started when it is powered on; AC-L and AC-N are 220V power inputs;OUT1 and OUT2 are connected to the heating coil; When installing, it should be noted that the radiator is live, do not touch the shell, and the shell must be reliably grounded; Coil reference parameters: (Please refer to the comparison table below for details). Mica winding glass fiber braided high-temperature resistant cable, cross-section national standard 6mm² inductance is 80~100uH, about 10~12m (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~, flat coil: 10~15mm, quota working current: 14~, frequency: 15K~25KHZ.25mm16A | | In Stock | New Sealed Under Guarantee | | |
Single-phase Digital 3.5KW(Half-bridge control board) | Electrical specifications of the product Rated voltage frequency: AC 220V/50Hz Voltage adaptation range: 100V~260V Rated power: 3.5KW (power adjustable range is 20~100%), rated working current: 14~16A Adaptability to the environment Temperature: -20°C~50°C; Humidity: ≤95%; Basic performance overview Voltage and power characteristics: 210~260V constant power output; Thermal efficiency≥ 95%; IGBT overheat protection temperature: 85±5°C; Working frequency: 5~40KHz; Based on 32-bit DSP all-digital processor, half-bridge series resonance; Using highly reliable digital phase-locked loop control technology, digital stepless adjustment, the power can be set through the digital display, and can also be adjusted by external potentiometer, and it is also compatible with 0~5VDC or 4~20mA analog PID to control the power output, and the power is 20%~100% adjustable; It has a completely electrically isolated soft start control interface (short circuit start/disconnect stop), which is easy to connect with the thermostat, and there is also a 12V/24V input start/stop mode control interface, which is convenient to connect with various solid state relays (there is a voltage input to work, on the contrary, stop heating, when using this function, the soft start interface will be empty, and the short circuit ring needs to be removed), the control response speed is fast, and the start time is It has the protection functions of heating coil short circuit and open circuit, 130% overload and no-load instantaneous protection function, and the protection response time ≤2uS; The coil has wide compatibility and can be compatible with the same model products of other companies; Strong anti-interference ability, 30 controllers can be controlled to start/stop at the same time on the same heating body without interfering with each other; With the open application platform, users can automatically read important parameters such as current, frequency, phase difference, temperature and so on with our company's special digital programming display, and can also set various application parameters as needed, making installation and debugging more simple and convenient; You can set 1~255 days of working time, automatically lock after the timer is completed, you need to enter the password to restart, and you can also set 6 groups of timing on/off according to your needs; Built-in modbus RTU communication protocol, with 485 interface, can be external contact touch screen, can also easily achieve remote control; Industrial-grade components, 100% tested by high temperature aging, to ensure long-term continuous and reliable work in 50°C industrial environment for 24 hours, average trouble-free service life: ≥50000Hrs; Factory standard configuration: integrated control board radiator, 1 external industrial indicator light; The physical size of the control board: length 220mm * width * height, customers must be equipped with a cooling fan (/220V)165mm90mm150mm The advantages of the company's electromagnetic heating plate The power supply adopts a wide voltage design, 210V~260V constant power output, especially suitable for the occasion of large grid voltage fluctuations It adopts 4 original imported IGBT half-bridge series resonant structure, the product quality is more stable, the anti-interference ability is stronger, and the continuous work for a long time does not burn the plate The power can be set by the digital display, and it can also be adjusted by an external potentiometer, and it is also compatible with 0~5VDC or 4~20mA analog PID to control the power output, so that the heating temperature control is more accurate, and it is more suitable for the production of various heating equipment The working time can be set for password locking, which can effectively prevent the problem of difficult collection of project funds, and can also set 6 groups of timed on/off according to the need, which is more intelligent and more convenient to use in areas with peak and valley electricity prices; It comes with 485 interface, which can be touched externally, and can also be easily controlled and centralized, which is conducive to the secondary development of equipment and the comprehensive management of the factory; Add 12V/24V voltage control interface, which is convenient for SSR solid state relay control; National unified warranty for 1 year, product lifetime maintenance, full technical guidance and service, so that you have no worries; System wiring description and schematic diagram 2 indicators, red power indicator and green working indicator (external work indicator), Power and Work are lit at the same time when working normally, the working indicator is flashing when the heat preservation state is shining, and the working indicator light flashes quickly when the fault state is shining; Soft Boot This terminal is used to start/stop. It works when it is closed, and stops when it is disconnected. Note: There is a short-circuit piece on the socket next to the green socket (Soft Boot terminal) at the factory, the socket has the same function as the green socket, if the green socket is used for control, the short-circuit piece must be removed, if the short-circuit piece is not removed, the control board will be automatically started when it is powered on; AC-L and AC-N are 220V power inputs, and OUT1 and OUT2 are output terminals connected to heating coils. When installing, it should be noted that the radiator is live, do not touch the shell, and the shell must be reliably grounded; Coil reference parameters: (Please refer to the comparison table below for details). Mica winding glass fiber braided high-temperature resistant cable, cross-section national standard 6mm² inductance is 80~100uH, about 15~17m (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~, flat coil: 10~15mm, quota working current: 14~16A, frequency: 10K~20KHZ.25mm | | In Stock | New Sealed Under Guarantee | | |
Single-phase Simulation 5KW(Half-bridge control board) | Electrical specifications of the productRated voltage frequency: AC 220V/50Hz Voltage adaptation range: 100V~260V Rated power: 5KW (power adjustable range is 30~100%) Adaptability to the environmentTemperature: -20°C~50°C; humidity: ≤95%; Basic performance overviewVoltage and power characteristics: 210~260V constant power output; Thermal efficiency≥90%; IGBT overheat protection temperature: 85±5°C; Working frequency: 15~30KHz; Half-bridge series resonance; Adopt high-reliability phase-locked loop control technology; It has 12V and 24V input start/stop modes, which is convenient for solid state relay control (there is voltage input to work, otherwise stop heating); It has the functions of short circuit, open circuit protection and no-load detection protection of heating coil; Strong anti-interference ability, on the same heating body, 30 coils work at the same time without interfering with each other; Highly reliable soft start galvanic isolation, multiple controllers can be directly connected to start/stop; Factory standard configuration: control board and radiator integration, 1 industrial indicator light; Physical size: length 225mm * width * height, with additional cooling fan (220V/);220mm110mm150mm The average time between failures is more than 10,000 hours. The advantages of the company's electromagnetic heating plateThe power supply adopts a wide voltage design, with a constant power output of 210V~260V, which is especially suitable for the occasion of large grid voltage fluctuations; It adopts 4 original imported IGBT half-bridge series resonant structure, the product quality is more stable, the anti-interference ability is stronger, and the board is not burned after continuous work for a long time; It can be customized with 0~5VDC or 4~20mA analog PID control interface to control the power output, make the heating temperature control more accurate, and more suitable for the production of various heating equipment Add 12V and 24V voltage control interfaces, which is convenient for solid state relay control; The introduction of advanced production technology from Japan, the product has undergone strict functional testing and aging testing before leaving the factory, and the quality has been effectively guaranteed, and the repair rate in 2017 is 0.72%. All products are guaranteed for 1 year, lifelong maintenance of products, and full technical guidance and service, so that you have no worries! System wiring description and schematic diagramThree indicators, power indicator Power and work light (two work lights Work, one on the board, one external), Power and Work are on at the same time when working normally, and the Work indicator is flashing when it is in the state of stopping work or protection; Soft Boot This terminal is used to start/stop. It works when it is closed, and stops when it is disconnected.Note: There is a short-circuit piece on the socket next to the green socket (Soft Boot terminal) at the factory, the socket has the same function as the green socket, if the green socket is used for control, the short-circuit piece must be removed, if the short-circuit piece is not removed, there is no need to connect the green socket, and the control board will be automatically started when it is powered on;AC-L and AC-N are 220V power inputs; OUT1 and OUT2 are connected to the heating coil; When installing, it should be noted that the radiator is live, do not touch the shell, and the shell must be reliably grounded; Coil reference parameters: (Please refer to the comparison table below for details).Mica wrapped glass fiber braided high-temperature resistant cable, cross-section national standard 8~10mm² inductance is 60~80uH, about 9~11m in length (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~25mm, flat coil: 10~15mm, quota working current: 20~, frequency: 15K~25KHZ.22A | kernal | In Stock | New Sealed Under Guarantee | | |
Single-phase Digital 5KW(Half-bridge control board) | Electrical specifications of the productRated voltage frequency: AC 220V/50Hz Voltage adaptation range: 100V~260V Rated power: 5KW (power adjustable range is 20~100%), rated working current: 20~22A Adaptability to the environmentTemperature: -20°C~50°C Humidity: ≤95% Basic performance overviewVoltage and power characteristics: 210~260V constant power output; Thermal efficiency≥ 95%; IGBT overheat protection temperature: 85±5°C; Working frequency: 5~40KHz; Based on 32-bit DSP all-digital processor, half-bridge series resonance; Using highly reliable digital phase-locked loop control technology, digital stepless adjustment, the power can be set through the digital display, and can also be adjusted by external potentiometer, and it is also compatible with 0~5VDC or 4~20mA analog PID to control the power output, and the power is 20%~100% adjustable; It has a fully galvanically isolated soft-start control interface (short-circuit start/disconnect stop) for easy connection with the thermostat, and a 12V/24V input start/stop mode control interface for easy connection with various solid-state relays (there is a voltage input to work, otherwise stop heating, when using this function, the soft-start interface should be empty, and the short-circuit ring needs to be removed)., the control response speed is fast, and the start-up time is It has the protection functions of heating coil short circuit and open circuit, 130% overload and no-load instantaneous protection function, and the protection response time ≤2uS; The coil has wide compatibility and can be compatible with the same model products of other companies; Strong anti-interference ability, 30 controllers can be controlled to start/stop at the same time on the same heating body without interfering with each other; With the open application platform, users can automatically read important parameters such as current, frequency, phase difference, temperature and so on with our special digital programming display, and can also set various application parameters as needed,making installation and debugging more simple and convenient You can set 1~255 days of working time, automatically lock after the timer is completed, you need to enter the password to restart, and you can also set 6 groups of timing on/off according to your needs; Built-in modbus RTU communication protocol, with 485 interface, can be external contact touch screen, can also easily achieve remote control; Using industrial-grade components, 100% of them have been tested by high temperature aging, to ensure 24 hours of continuous and reliable work in the industrial environment of 50°C for a long time, and the average trouble-free service life:≥50000Hrs; Factory standard configuration: integrated control board radiator, 1 external industrial indicator light; Physical size: length 220mm * width * height, customers must be equipped with a cooling fan (/220V);165mm90mm150mm The advantages of the company's electromagnetic heating plateThe power supply adopts a wide voltage design, with a constant power output of 210V~260V, which is especially suitable for the occasion of large grid voltage fluctuations; It adopts 4 60A original imported IGBT half-bridge series resonant structure, the product quality is more stable, the anti-interference ability is stronger, and the board is not burned for a long time continuous work; The power can be set by the digital display, and can also be adjusted by an external potentiometer, and it is also compatible with 0~5VDC or 4~20mA analog PID to control the power output, so that the heating temperature control is more accurate, and it is more suitable for the production of various heating equipment; The working time can be set for password locking, which can effectively prevent the problem of difficult collection of project funds, and can also set 6 groups of timed on/off according to the need, which is more intelligent and more convenient to use in areas with peak and valley electricity prices; It comes with 485 interface, which can be touched externally, and can also be easily controlled and centralized, which is conducive to the secondary development of equipment and the comprehensive management of the factory; Add 12V/24V voltage control interface, which is convenient for SSR solid state relay control; The national unified warranty is 1 year, the product is maintained for life, and the whole process of technical guidance and service allows you to have no worries. System wiring description and schematic diagramTwoindicators, red power indicator and green working indicator (external work indicator), Power and Work are lit at the same time when working normally, the working indicator is flashing when the heat preservation state is shining, and the working indicator light flashes quickly when the fault state is shining; Soft Boot This terminal is used to start/stop. It works when it is closed, and stops when is disconnected.Note: There is a short-circuit piece on the socket next to the green socket (Soft Boot terminal) at the factory, the socket has the same function as the green socket, if the green socket is used for control, the short-circuit piece must be removed, if the short-circuit piece is not removed, the control board will be automatically started when it is powered on;AC-L and AC-N are 220V power inputs, and OUT1 and OUT2 are output terminals connected to heating coils. When installing, it should be noted that the radiator is live, do not touch the shell, and the shell must be reliably grounded; Coil reference parameters: (Please refer to the comparison table below for details).Mica winding glass fiber braided high-temperature resistant cable, cross-section national standard 8~10mm² inductance is 60~80uH, about 12~15m in length (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~, flat coil: 10~15mm, quota working current: 20~, frequency: 10K~20KHZ.25mm22A | | In Stock | New Sealed Under Guarantee | | |
Single-phase 5KW(Half-bridge Controller) | Electrical specifications of the product 1.Rated voltage frequency: AC 380V/50Hz 2.Voltage adaptation range: 310V~450V 3.Rated power: 5KW and 8KW (adjustable range of 20~100% respectively). Adaptability to the environmentTemperature: -20°C~;50℃ Humidity: ≤95% Basic performance overviewVoltage and power characteristics: 310~450V constant power output; Thermal efficiency≥ 95%; IGBT overheat protection temperature: 85±5°C; Working frequency: 5~40KHz; Industrial-grade high-reliability AVR microcontroller, half-bridge series resonance; Using highly reliable digital phase-locked loop control technology, theIGBT works in the zero-voltage turn-on and zero-current shutdown state, which effectively reduces the impact and loss of the IGBT, and revolutionizes the problem that has plagued users for a long time The digital stepless adjustment realizes 20%~100% adjustable power, and is also compatible with 0~5VDC and 4~20mA analog PID control power output; It has a completely electrically isolated soft start heating/stop mode control interface, which is easy to connect with the thermostat, and a 12V/24V input start/stop mode control interface, which is convenient to connect with various solid-state relays (there is a voltage input to work, otherwise stop heating), the control response speed is fast, and the start time is It has the function of heating coil short circuit and open circuit protection, 130% overload and no-load instantaneous protection function, and the protection response time ≤2uS; Add a load temperature detection interface, connect the thermistor, the detection temperature range is 0~150°C, and the accuracy is up to ±1°C The coil has wide compatibility and can be compatible with the same model products of other companies; Strong anti-interference ability, soft start, high reliability and electrical isolation, 30 controllers can be controlled to start/stop at the same time on the same heating body without interfering with each other; With the open application platform, users can automatically read important parameters such as current, frequency, phase difference, temperature and so on with our special digital programming display, and can also set various application parameters as needed,making installation and debugging more simple and convenient You can set 1~255 days of working time, and it will be automatically turned off when the timer is completed, and you need to enter the password to restart; Industrial-grade components, 100% of which have been tested by high temperature aging, ensure 24 hours of continuous and reliable work in the 50°C industrial environment for a long time, and the average trouble-free service life ≥50000Hrs; Factory standard configuration: control board and radiator integration, 1 industrial indicator light Physical size: length 225mm * width * height, with additional cooling fan (380V/ or 24V/500mA DC fan);220mm110mm150mm The advantages of the company's electromagnetic heating plateThe power supply adopts a wide voltage design, 310V~450V constant power output, especially suitable for the occasion of large grid voltage fluctuations; The product adopts industrial-grade AVR all-digital phase-locked loop control technology, with digital stepless power adjustment of 20~100%, and adds 5VDC and 4~20mA analog PID control interface, which makes the power control more accurate and stable, and is more suitable for the production of various equipment; It has perfect protection functions such as short-circuit and open-circuit protection, no-load and overload protection, over-temperature and over-current, etc., to ensure that the product does not burn the board for a long time; Using 4 pieces of 60A original imported Fairchild IGBT half-bridge series resonant structure, the product quality is more stable, the anti-interference ability is stronger, the long-term continuous work does not burn the board, and the product start-up time and controlled reflection speed are faster than peers, and the temperature control is more accurate; Add 12V/24V voltage control interface, which is convenient for solid state relay control; The introduction of advanced production technology from Japan, the products have undergone strict functional tests and high-temperature aging tests before leaving the factory to ensure that the products work continuously and reliably for 24 hours in a 50°C industrial environment for a long time, and theservice life is ≥ 50000Hrs; System wiring description and schematic diagramThree indicators, power indicator and work light (two work lights, one on the board, one external), Power and Work are on at the same time when working normally, and the Work indicator is flashing when it is in the state of stop work or protection When leaving the factory, it is equipped with a 12V external indicator light for the user to lead the working indicator light on the board to the outside of the electrical box; Soft Boot This terminal is used to start/stop. Working when it is closed, stopping when it is disconnected;Note: There is a short-circuit piece on the socket next to the green socket (Soft Boot terminal) at the factory, the socket has the same function as the green socket, if the green socket is used for control, the short-circuit piece must be removed, if the short-circuit piece is not removed, there is no need to connect the green socket, and the control board will be automatically started when it is powered on;Three-phase electricity A, B, C are 380V power input, OUT1 and OUT2 are output terminals connected to heating coils; When installing, it should be noted that the radiator is live, do not touch the shell, and the shell is reliably grounded; Coil reference parameters: (Please refer to the comparison table below for details).Three-phase 5KW: mica winding glass fiber braided high-temperature cable, cross-section national standard 6mm² inductance is 250~300uH, approximate length: 45~ (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~, flat coil: 10~15mm, rated working current: 7~, frequency: 10K~20KHZ50m25mm8A Three-phase 8KW: mica wrapped glass fiber braided high-temperature cable, cross-section national standard 10mm² inductance is 200~250uH, approximate length: 40~45mm (excluding lead length), the thickness of the insulation cotton is required to be about 15~25mm, tubular coil: 10~15mm, rated working current: 10~12A, frequency: 10K~20KHZ | kernal | In Stock | New Sealed Under Guarantee | | |
Three-phase 8KW(Half-bridge Controller) | Electrical specifications of the product 1.Rated voltage frequency: AC 380V/50Hz 2.Voltage adaptation range: 310V~450V 3.Rated power: 5KW and 8KW (adjustable range of 20~100% respectively). Adaptability to the environmentTemperature: -20°C~;50℃ Humidity: ≤95% Basic performance overviewVoltage and power characteristics: 310~450V constant power output; Thermal efficiency≥ 95%; IGBT overheat protection temperature: 85±5°C; Working frequency: 5~40KHz; Industrial-grade high-reliability AVR microcontroller, half-bridge series resonance; Using highly reliable digital phase-locked loop control technology, theIGBT works in the zero-voltage turn-on and zero-current shutdown state, which effectively reduces the impact and loss of the IGBT, and revolutionizes the problem that has plagued users for a long time The digital stepless adjustment realizes 20%~100% adjustable power, and is also compatible with 0~5VDC and 4~20mA analog PID control power output; It has a completely electrically isolated soft start heating/stop mode control interface, which is easy to connect with the thermostat, and a 12V/24V input start/stop mode control interface, which is convenient to connect with various solid-state relays (there is a voltage input to work, otherwise stop heating), the control response speed is fast, and the start time is It has the function of heating coil short circuit and open circuit protection, 130% overload and no-load instantaneous protection function, and the protection response time ≤2uS; Add a load temperature detection interface, connect the thermistor, the detection temperature range is 0~150°C, and the accuracy is up to ±1°C The coil has wide compatibility and can be compatible with the same model products of other companies; Strong anti-interference ability, soft start, high reliability and electrical isolation, 30 controllers can be controlled to start/stop at the same time on the same heating body without interfering with each other; With the open application platform, users can automatically read important parameters such as current, frequency, phase difference, temperature and so on with our special digital programming display, and can also set various application parameters as needed,making installation and debugging more simple and convenient You can set 1~255 days of working time, and it will be automatically turned off when the timer is completed, and you need to enter the password to restart; Industrial-grade components, 100% of which have been tested by high temperature aging, ensure 24 hours of continuous and reliable work in the 50°C industrial environment for a long time, and the average trouble-free service life ≥50000Hrs; Factory standard configuration: control board and radiator integration, 1 industrial indicator light Physical size: length 225mm * width * height, with additional cooling fan (380V/ or 24V/500mA DC fan);220mm110mm150mm The advantages of the company's electromagnetic heating plateThe power supply adopts a wide voltage design, 310V~450V constant power output, especially suitable for the occasion of large grid voltage fluctuations; The product adopts industrial-grade AVR all-digital phase-locked loop control technology, with digital stepless power adjustment of 20~100%, and adds 5VDC and 4~20mA analog PID control interface, which makes the power control more accurate and stable, and is more suitable for the production of various equipment; It has perfect protection functions such as short-circuit and open-circuit protection, no-load and overload protection, over-temperature and over-current, etc., to ensure that the product does not burn the board for a long time; Using 4 pieces of 60A original imported Fairchild IGBT half-bridge series resonant structure, the product quality is more stable, the anti-interference ability is stronger, the long-term continuous work does not burn the board, and the product start-up time and controlled reflection speed are faster than peers, and the temperature control is more accurate; Add 12V/24V voltage control interface, which is convenient for solid state relay control; The introduction of advanced production technology from Japan, the products have undergone strict functional tests and high-temperature aging tests before leaving the factory to ensure that the products work continuously and reliably for 24 hours in a 50°C industrial environment for a long time, and theservice life is ≥ 50000Hrs; System wiring description and schematic diagramThree indicators, power indicator and work light (two work lights, one on the board, one external), Power and Work are on at the same time when working normally, and the Work indicator is flashing when it is in the state of stop work or protection When leaving the factory, it is equipped with a 12V external indicator light for the user to lead the working indicator light on the board to the outside of the electrical box; Soft Boot This terminal is used to start/stop. Working when it is closed, stopping when it is disconnected;Note: There is a short-circuit piece on the socket next to the green socket (Soft Boot terminal) at the factory, the socket has the same function as the green socket, if the green socket is used for control, the short-circuit piece must be removed, if the short-circuit piece is not removed, there is no need to connect the green socket, and the control board will be automatically started when it is powered on;Three-phase electricity A, B, C are 380V power input, OUT1 and OUT2 are output terminals connected to heating coils; When installing, it should be noted that the radiator is live, do not touch the shell, and the shell is reliably grounded; Coil reference parameters: (Please refer to the comparison table below for details).Three-phase 5KW: mica winding glass fiber braided high-temperature cable, cross-section national standard 6mm² inductance is 250~300uH, approximate length: 45~ (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~, flat coil: 10~15mm, rated working current: 7~, frequency: 10K~20KHZ50m25mm8A Three-phase 8KW: mica wrapped glass fiber braided high-temperature cable, cross-section national standard 10mm² inductance is 200~250uH, approximate length: 40~45mm (excluding lead length), the thickness of the insulation cotton is required to be about 15~25mm, tubular coil: 10~15mm, rated working current: 10~12A, frequency: 10K~20KHZ | kernal | In Stock | New Sealed Under Guarantee | | |
Three-phase 10KW(Half-bridge control board) | Electrical specifications of the product 1.Rated voltage frequency: AC 380V/50Hz 2.Voltage adaptation range: 310V~450V 3.Rated power: 10KW and 15KW (adjustable range is 20~100%) Adaptability to the environmentTemperature: -20°C~;50℃ Humidity: ≤95% Basic performance overviewVoltage and power characteristics: 310~450V constant power output; Thermal efficiency≥ 95%; IGBT overheat protection temperature: 85±5°C; Working frequency: 5~40KHz; Industrial-grade high-reliability AVR microcontroller, half-bridge series resonance; Using highly reliable digital phase-locked loop control technology, theIGBT works in the zero-voltage turn-on and zero-current shutdown state, which effectively reduces the impact and loss of the IGBT, and revolutionizes the problem that has plagued users for a long time The digital stepless adjustment realizes 20%~100% adjustable power, and is also compatible with 0~5VDC and 4~20mA analog PID control power output; It has a completely electrically isolated soft start heating/stop mode control interface, which is easy to connect with the thermostat, and a 12V/24V input start/stop mode control interface, which is convenient to connect with various solid-state relays (there is a voltage input to work, otherwise stop heating), the control response speed is fast, and the start time is It has the function of heating coil short circuit and open circuit protection, 130% overload and no-load instantaneous protection function, and the protection response time ≤2uS; Add a load temperature detection interface, connected to a thermistor, the detection temperature range is 0~150°C, and the accuracy is up to ±1°C; The coil has wide compatibility and can be compatible with the same model products of other companies; Strong anti-interference ability, soft start, high reliability and electrical isolation, 30 controllers can be controlled to start/stop at the same time on the same heating body without interfering with each other; With the open application platform, users can automatically read important parameters such as current, frequency, phase difference, temperature and so on with our special digital programming display, and can also set various application parameters as needed,making installation and debugging more simple and convenient You can set 1~255 days of working time, and it will be automatically turned off when the timer is completed, and you need to enter the password to restart; Industrial-grade components, 100% tested by high temperature aging, to ensure long-term continuous and reliable work in 50°C industrial environment for 24 hours, service life ≥ 50000Hrs; Factory standard configuration: control board and radiator integration, 1 industrial indicator light; Thephysical dimensions are: length 240mm, width 195mm, height 160mm, additional cooling fan (380V/150mm or 24V/500mA DC fan). The advantages of the company's electromagnetic heating plateThe power supply adopts a wide voltage design, 310V~450V constant power output, especially suitable for the occasion of large grid voltage fluctuations; The product adopts industrial-grade AVR all-digital phase-locked loop control technology, with digital stepless power adjustment of 20~100%, and adds 5VDC and 4~20mA analog PID control interface, which makes the power control more accurate and stable, and is more suitable for the production of various equipment; It has perfect protection functions such as short-circuit and open-circuit protection, no-load and overload protection, over-temperature and over-current, etc., to ensure that the product does not burn the board for a long time; Adopting the original imported Infineon (100A for 10KW; 15KW)150A IGBT module half-bridge series resonant structure, the product quality is more stable, the anti-interference ability is stronger, the long-term continuous work does not burn the board, and theproduct start-up time and controlled response speed are faster than peers, and the temperature control is more accurate Add 12V/24V voltage control interface, which is convenient for solid state relay control The introduction of advanced production technology from Japan, the product has undergone strict functional testing and high-temperature aging test before leaving the factory to ensure that the product works continuously and reliably for 24 hours in a 50°C industrial environment for a long time, and theservice life is ≥ 50000Hrs System wiring description and schematic diagramThree indicators, power indicator and work light (two work lights, one on the board, one external), Power and Work are on at the same time when working normally, and the Work indicator is flashing when it is in the state of stop work or protection Soft Boot This terminal is used to control start/stop. It works when it is closed, and stops when it is disconnected.Note: There is a short circuit piece on the socket next to the green socket (Soft Boot terminal) at the factory, the socket has the same function as the green socket, if the green socket is used for control, the short circuit piece must be removed, if the short circuit piece is not removed, there is no need to connect the green socket, and the control board will be automatically started when it is powered on.Three-phase electricity A, B, C are 380V power inputs, and OUT1 and OUT2 are output terminals connected to heating coils. When installing, it should be noted that the radiator is not electrified! Coil reference parameters: (Please refer to the comparison table below for details).Three-phase 10KW: mica winding glass fiber braided high-temperature cable, cross-section national standard 10mm² inductance is 150~180uH, about length: 30~35m (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~, flat coil: 10~15mm, rated working current: 14~15A, frequency: 10K~20KHZ25mm Three-phase 15KW: mica wrapped fiberglass braided high-temperature cable, cross-section national standard 16mm² inductance is 110~140uH, about the length of 25~30m (excluding the length of the lead), the thickness of the insulation cotton is required to be about: tubular coil 15~25mm, flat coil: 10~15mm, rated working current: 20~22A, frequency: 10K~20KHZ | kernal | In Stock | New Sealed Under Guarantee | | |
Three-phase 10KW(Half-bridge Controller) | Electrical specifications of the product 1.Rated voltage frequency: AC 380V/50Hz 2.Voltage adaptation range: 310V~450V 3.Rated power: 10KW and 15KW (adjustable range is 20~100%) Adaptability to the environmentTemperature: -20°C~;50℃ Humidity: ≤95% Basic performance overviewVoltage and power characteristics: 310~450V constant power output; Thermal efficiency≥ 95%; IGBT overheat protection temperature: 85±5°C; Working frequency: 5~40KHz; Industrial-grade high-reliability AVR microcontroller, half-bridge series resonance; Using highly reliable digital phase-locked loop control technology, theIGBT works in the zero-voltage turn-on and zero-current shutdown state, which effectively reduces the impact and loss of the IGBT, and revolutionizes the problem that has plagued users for a long time The digital stepless adjustment realizes 20%~100% adjustable power, and is also compatible with 0~5VDC and 4~20mA analog PID control power output; It has a completely electrically isolated soft start heating/stop mode control interface, which is easy to connect with the thermostat, and a 12V/24V input start/stop mode control interface, which is convenient to connect with various solid-state relays (there is a voltage input to work, otherwise stop heating), the control response speed is fast, and the start time is It has the function of heating coil short circuit and open circuit protection, 130% overload and no-load instantaneous protection function, and the protection response time ≤2uS; Add a load temperature detection interface, connected to a thermistor, the detection temperature range is 0~150°C, and the accuracy is up to ±1°C; The coil has wide compatibility and can be compatible with the same model products of other companies; Strong anti-interference ability, soft start, high reliability and electrical isolation, 30 controllers can be controlled to start/stop at the same time on the same heating body without interfering with each other; With the open application platform, users can automatically read important parameters such as current, frequency, phase difference, temperature and so on with our special digital programming display, and can also set various application parameters as needed,making installation and debugging more simple and convenient You can set 1~255 days of working time, and it will be automatically turned off when the timer is completed, and you need to enter the password to restart; Industrial-grade components, 100% tested by high temperature aging, to ensure long-term continuous and reliable work in 50°C industrial environment for 24 hours, service life ≥ 50000Hrs; Factory standard configuration: control board and radiator integration, 1 industrial indicator light; Thephysical dimensions are: length 240mm, width 195mm, height 160mm, additional cooling fan (380V/150mm or 24V/500mA DC fan). The advantages of the company's electromagnetic heating plateThe power supply adopts a wide voltage design, 310V~450V constant power output, especially suitable for the occasion of large grid voltage fluctuations; The product adopts industrial-grade AVR all-digital phase-locked loop control technology, with digital stepless power adjustment of 20~100%, and adds 5VDC and 4~20mA analog PID control interface, which makes the power control more accurate and stable, and is more suitable for the production of various equipment; It has perfect protection functions such as short-circuit and open-circuit protection, no-load and overload protection, over-temperature and over-current, etc., to ensure that the product does not burn the board for a long time; Adopting the original imported Infineon (100A for 10KW; 15KW)150A IGBT module half-bridge series resonant structure, the product quality is more stable, the anti-interference ability is stronger, the long-term continuous work does not burn the board, and theproduct start-up time and controlled response speed are faster than peers, and the temperature control is more accurate Add 12V/24V voltage control interface, which is convenient for solid state relay control The introduction of advanced production technology from Japan, the product has undergone strict functional testing and high-temperature aging test before leaving the factory to ensure that the product works continuously and reliably for 24 hours in a 50°C industrial environment for a long time, and theservice life is ≥ 50000Hrs System wiring description and schematic diagramThree indicators, power indicator and work light (two work lights, one on the board, one external), Power and Work are on at the same time when working normally, and the Work indicator is flashing when it is in the state of stop work or protection Soft Boot This terminal is used to control start/stop. It works when it is closed, and stops when it is disconnected.Note: There is a short circuit piece on the socket next to the green socket (Soft Boot terminal) at the factory, the socket has the same function as the green socket, if the green socket is used for control, the short circuit piece must be removed, if the short circuit piece is not removed, there is no need to connect the green socket, and the control board will be automatically started when it is powered on.Three-phase electricity A, B, C are 380V power inputs, and OUT1 and OUT2 are output terminals connected to heating coils. When installing, it should be noted that the radiator is not electrified! Coil reference parameters: (Please refer to the comparison table below for details).Three-phase 10KW: mica winding glass fiber braided high-temperature cable, cross-section national standard 10mm² inductance is 150~180uH, about length: 30~35m (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~, flat coil: 10~15mm, rated working current: 14~15A, frequency: 10K~20KHZ25mm Three-phase 15KW: mica wrapped fiberglass braided high-temperature cable, cross-section national standard 16mm² inductance is 110~140uH, about the length of 25~30m (excluding the length of the lead), the thickness of the insulation cotton is required to be about: tubular coil 15~25mm, flat coil: 10~15mm, rated working current: 20~22A, frequency: 10K~20KHZ | kernal | In Stock | New Sealed Under Guarantee | | |
Three-phase 12KW(Half-bridge Controller) | Product electrical specifications 1. Rated voltage frequency: AC 380V/50Hz 2. Voltage adaptation range: 310V~450V 3. Rated power: 12KW (adjustable power range from 20 to 100%) Environmental adaptability1. Temperature: -20 ℃ to 50 ℃;2. Humidity: ≤ 95% Basic Performance Overview1. Voltage and power characteristics: 310-450V constant power output;2. Thermal efficiency ≥ 95%;3. IGBT overheat protection temperature: 85 ± 5 ℃;4. Working frequency: 5-40KHz;5. Adopting industrial grade high reliability AVR microcontroller, half bridge series resonance;6. By adopting highly reliable digital phase-locked loop control technology, the IGBT module operates in a zero voltage on and zero current off state, effectively reducing the impact and loss on the IGBT module, and revolutionary solving the long-standing problem of module explosion for users;7. Digital stepless regulation achieves power adjustable from 20% to 100%, and is also compatible with 0-5V and 4-20mA analog PID control power output;8. Equipped with a fully electrically isolated soft start heating/stop mode control interface, making it easy to connect with the temperature controller; Equipped with a 12V/24V input start/stop mode control interface, easy to connect with various solid-state relays (with voltage input working, otherwise stop heating), with fast control response speed and start time less than 1 second;9. Equipped with heating coil short circuit and open circuit protection functions, 130% overload and no-load instantaneous protection functions, with a protection response time of ≤ 2uS;10. Add a load temperature detection interface connected to a thermistor, with a detection temperature range of 0-150 ℃ and an accuracy of ± 1 ℃;11. The coil has wide compatibility and can be used to replace products of the same model from other companies;12. Strong anti-interference ability, highly reliable electrical isolation for soft start, capable of simultaneously controlling 30 controllers to start/stop on the same heating element without interfering with each other;13. Open application platform, users can use our company's dedicated digital programming display to automatically read important parameters such as current, frequency, phase difference, temperature, etc. They can also set various application parameters as needed, making installation and debugging simpler and more convenient;13. You can set a working time of 1-255 days, and the timer will automatically close after completion. You need to enter a password to restart;14. Using industrial grade components and undergoing 100% high-temperature aging testing, it ensures continuous and reliable operation for 24 hours in a 50 ℃ industrial environment for a long time, with an average fault free service life of ≥ 50000Hrs;15. Product factory standard configuration: integrated control board and heat sink, equipped with a cooling fan, chassis, and digital display;16. Physical dimensions of the controller: length 290mm * width 250mm * height 170mm. Our company's advantages in electromagnetic heating plates1. The power supply adopts a wide voltage design, with a constant power output of 310V~440V, especially suitable for use in situations with large voltage fluctuations in the power grid;2. This product adopts all industrial grade high reliability AVRs | kernal | In Stock | New Sealed Under Guarantee | | |
Three-phase 15KW(Half-bridge Controller) | Electrical specifications of the product 1.Rated voltage frequency: AC 380V/50Hz 2.Voltage adaptation range: 310V~450V 3.Rated power: 10KW and 15KW (adjustable range is 20~100%) Adaptability to the environmentTemperature: -20°C~;50℃ Humidity: ≤95% Basic performance overviewVoltage and power characteristics: 310~450V constant power output; Thermal efficiency≥ 95%; IGBT overheat protection temperature: 85±5°C; Working frequency: 5~40KHz; Industrial-grade high-reliability AVR microcontroller, half-bridge series resonance; Using highly reliable digital phase-locked loop control technology, theIGBT works in the zero-voltage turn-on and zero-current shutdown state, which effectively reduces the impact and loss of the IGBT, and revolutionizes the problem that has plagued users for a long time The digital stepless adjustment realizes 20%~100% adjustable power, and is also compatible with 0~5VDC and 4~20mA analog PID control power output; It has a completely electrically isolated soft start heating/stop mode control interface, which is easy to connect with the thermostat, and a 12V/24V input start/stop mode control interface, which is convenient to connect with various solid-state relays (there is a voltage input to work, otherwise stop heating), the control response speed is fast, and the start time is It has the function of heating coil short circuit and open circuit protection, 130% overload and no-load instantaneous protection function, and the protection response time ≤2uS; Add a load temperature detection interface, connected to a thermistor, the detection temperature range is 0~150°C, and the accuracy is up to ±1°C; The coil has wide compatibility and can be compatible with the same model products of other companies; Strong anti-interference ability, soft start, high reliability and electrical isolation, 30 controllers can be controlled to start/stop at the same time on the same heating body without interfering with each other; With the open application platform, users can automatically read important parameters such as current, frequency, phase difference, temperature and so on with our special digital programming display, and can also set various application parameters as needed,making installation and debugging more simple and convenient You can set 1~255 days of working time, and it will be automatically turned off when the timer is completed, and you need to enter the password to restart; Industrial-grade components, 100% tested by high temperature aging, to ensure long-term continuous and reliable work in 50°C industrial environment for 24 hours, service life ≥ 50000Hrs; Factory standard configuration: control board and radiator integration, 1 industrial indicator light; Thephysical dimensions are: length 240mm, width 195mm, height 160mm, additional cooling fan (380V/150mm or 24V/500mA DC fan). The advantages of the company's electromagnetic heating plateThe power supply adopts a wide voltage design, 310V~450V constant power output, especially suitable for the occasion of large grid voltage fluctuations; The product adopts industrial-grade AVR all-digital phase-locked loop control technology, with digital stepless power adjustment of 20~100%, and adds 5VDC and 4~20mA analog PID control interface, which makes the power control more accurate and stable, and is more suitable for the production of various equipment; It has perfect protection functions such as short-circuit and open-circuit protection, no-load and overload protection, over-temperature and over-current, etc., to ensure that the product does not burn the board for a long time; Adopting the original imported Infineon (100A for 10KW; 15KW)150A IGBT module half-bridge series resonant structure, the product quality is more stable, the anti-interference ability is stronger, the long-term continuous work does not burn the board, and theproduct start-up time and controlled response speed are faster than peers, and the temperature control is more accurate Add 12V/24V voltage control interface, which is convenient for solid state relay control The introduction of advanced production technology from Japan, the product has undergone strict functional testing and high-temperature aging test before leaving the factory to ensure that the product works continuously and reliably for 24 hours in a 50°C industrial environment for a long time, and theservice life is ≥ 50000Hrs System wiring description and schematic diagramThree indicators, power indicator and work light (two work lights, one on the board, one external), Power and Work are on at the same time when working normally, and the Work indicator is flashing when it is in the state of stop work or protection Soft Boot This terminal is used to control start/stop. It works when it is closed, and stops when it is disconnected.Note: There is a short circuit piece on the socket next to the green socket (Soft Boot terminal) at the factory, the socket has the same function as the green socket, if the green socket is used for control, the short circuit piece must be removed, if the short circuit piece is not removed, there is no need to connect the green socket, and the control board will be automatically started when it is powered on.Three-phase electricity A, B, C are 380V power inputs, and OUT1 and OUT2 are output terminals connected to heating coils. When installing, it should be noted that the radiator is not electrified! Coil reference parameters: (Please refer to the comparison table below for details).Three-phase 10KW: mica winding glass fiber braided high-temperature cable, cross-section national standard 10mm² inductance is 150~180uH, about length: 30~35m (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~, flat coil: 10~15mm, rated working current: 14~15A, frequency: 10K~20KHZ25mm Three-phase 15KW: mica wrapped fiberglass braided high-temperature cable, cross-section national standard 16mm² inductance is 110~140uH, about the length of 25~30m (excluding the length of the lead), the thickness of the insulation cotton is required to be about: tubular coil 15~25mm, flat coil: 10~15mm, rated working current: 20~22A, frequency: 10K~20KHZ | kernal | In Stock | New Sealed Under Guarantee | | |
Three-phase 20KW(Full-bridge Controller) | Electrical specifications of the productRated voltage frequency: AC 380V/50Hz Voltage adaptation range: 310V~450V Rated power: 20KW, 30KW, 40KW, 50KW, 60KW, 80KW, 100KW(power adjustable range 20~100%) Adaptability to the environmentTemperature: -20°C~;50℃ Humidity: ≤95% Basic performance overviewVoltage and power characteristics: 310~450V constant power output; Thermal conversion efficiency≥95%; IGBT superheat holding temperature: 85±5°C; Working frequency: 5~40KHz; Adopting industrial-grade high-reliability AVR microcontroller, industrial-grade stable half-bridge/full-bridge control technology, there are two types of half-bridge 20KW and 30KW, and seven models of full-bridge are 20KW, 30KW, 40KW, 50KW, 60KW, 80KW and 100KW, which are suitable for different applications Using the latest third-generation digital processing platform in China, embedded 32-bit processing system, all-digital phase-shifting PWM modulation technology, IGBT works in zero voltage turn-on and zero current shutdown state, effectively reducing the impact and loss of IGBT, faster protection, more stable equipment, and revolutionizing the problem of blowing up the machine that has plagued users for a long time The digital stepless adjustment realizes 20%~100% linear adjustable power, and is also compatible with 0~5VDC and 4~20mA analog PID control power outputto ensure more accurate and stable temperature control The RS485 communication interface is added, and the modbus RTU efficient data transmission technology is adopted, which can realize the remote centralized control and management of the controller, which can meet the requirements and needs of customers at a higher level Add 2 load temperature detection interfaces, connect thermistors, detect temperature range 0~150°C, accuracy up to ±1°C; Using the open application platform, customers can automatically measure the working frequency, input current, coil output current,IGBT temperature, PWM phase difference and other parameters through the digital programming display, and can also set various application parameters according to the need, which is convenient for installation and debugging, and even secondary development and application (please refer to the display operation instructions later for specific setting operations).； It has a fully electrically isolated soft start heating/stop mode control interface, which is easy to connect with the thermostat for control, and the start and power rise time is Using imported high-speed DC cooling fans, the full-bridge 30KW, 40KW, 50KW, 60KW, 80KW and 100KW can be made into a domestic original "water cooling + air cooling" dual heat dissipation system, the heat dissipation effect is stronger, and the equipment operation is more stable and safer It has the protection functions of heating coil short circuit, open circuit, power supply phase loss, overheating, overcurrent, overvoltage, etc.,130% overload and no-load instantaneous protection function, protection response time ≤2uS, more complete functions, faster protection speed; You can set 1~255 days of running time, automatic shutdown after the timer, you must enter the password to start the machine, the user can set and modify the password at will, effectively overcome the problem of difficult to collect the project money; Using the domestic original coil intelligent identification technology, it automatically detects the coil parameters and adjusts the output power to achieve the best state, and the coil has wide compatibility, which can be compatible with the same model products of other companies; Strong anti-interference ability, soft start, high reliability and electrical isolation, can control multiple controllers to start/stop at the same time on the same heating element without interfering with each other; The original imported Infineon IGBT module of the world's famous brand is adopted, and the imported special IGBT module driver is used to ensure the continuous safe and stable operation of the equipment for a long time; Industrial-grade components, 100% tested by high temperature aging, to ensure long-term continuous and reliable work in 50°C industrial environment for 24 hours, service life ≥ 50000Hrs; The product comes standard with the following equipment: chassis, radiator and high-speed DC cooling fan integration, display, industrial indicator with space plug, R/S soft start space plug; Advantages of the company's productsThe power supply adopts a wide voltage design, 310V~450V constant power output, especially suitable for the occasion of large grid voltage fluctuations; Using the original imported Infineon IGBT module half-bridge/full-bridge control technology, the product quality is more stable, the anti-interference ability is stronger, suitable for commercial/industrial long-term continuous work, and theproduct start-up time and control reflection speed is faster than peers, and the temperature control is more accurate It adopts the latest third-generation digital processing platform technology, embedded 32-bit processing system, all-digital phase-shifting PWM modulation technology, digital stepless adjustment power of 20~100%, and increases PID interface control function, input 0~5VDC to control the power output, so that the heating temperature control is more accurate and stable, and is more suitable for the production of various heating equipment The RS485 communication interface is added, and the modbus RTU efficient data transmission technology is adopted, which can realize the remote centralized control and management of the controller, which can meet the requirements and needs of customers at a higher level The built-in digital programming display can automatically measure the working current, working frequency, IGBT temperature, PWM parameters, and can also set the working time and password lock, that is, when the time comes, the controller will automatically stop working and must enter the password to restart, which is especially suitable for the promotion of electromagnetic heating energy-saving transformation to prevent difficulties and disputes in collecting payments; The product adopts an open application platform, and customers can set various parameters through the programming display, which is more suitable for the supporting production of various equipment, as well as the secondary development and application of the system; It has perfect protection functions such as short circuit, open circuit, phase loss, overheating, overcurrent, overvoltage, etc.,to ensure that the product does not burn the plate when working continuously for a long time, with more complete functions and faster protection speed Using the domestic original coil intelligent identification technology, it automatically detects the coil parameters and adjusts the output power to achieve the best state, and the coil has wide compatibility, which can be compatible with and replace the same model products of other companies; The introduction of advanced production technology from Japan, the product has undergone strict functional testing and high-temperature aging test before leaving the factory to ensure that the product works continuously and reliably for 24 hours in a 50°C industrial environment for a long time, and theservice life is ≥ 50000Hrs System wiring description and schematic diagramAn external working indicator is always on when it is working normally, and the working indicator is flashing when it is in the state of stopping work or protection R/S is a soft-start interface that controls the controller to start/stop, working when it is in a short circuit and stopping when it is disconnected. Three-phase electricity R, S, T are 380V power input, L1 and L2 are output terminals connected to heating coils (such as controller wiring diagram); Coil reference parameters: (Please refer to the comparison table below for details).Digital full-bridge 20KW: mica wrapped glass fiber braided high-temperature cable, cross-section national standard 10mm² inductance is 250~300uH, approximate length: 50~55m (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 20~30mm, flat coil: 10~15mm, rated working current: 27~30A, frequency: 10K~20KHZ. | kernal | In Stock | New Sealed Under Guarantee | | |
Three-phase 60KW(Full-bridge Controller) | Electrical specifications of the productRated voltage frequency: AC 380V/50Hz Voltage adaptation range: 310V~450V Rated power: 20KW, 30KW, 40KW, 50KW, 60KW, 80KW, 100KW(power adjustable range 20~100%) Adaptability to the environmentTemperature: -20°C~;50℃ Humidity: ≤95% Basic performance overviewVoltage and power characteristics: 310~450V constant power output; Thermal conversion efficiency≥95%; IGBT superheat holding temperature: 85±5°C; Working frequency: 5~40KHz; Adopting industrial-grade high-reliability AVR microcontroller, industrial-grade stable half-bridge/full-bridge control technology, there are two types of half-bridge 20KW and 30KW, and seven models of full-bridge are 20KW, 30KW, 40KW, 50KW, 60KW, 80KW and 100KW, which are suitable for different applications Using the latest third-generation digital processing platform in China, embedded 32-bit processing system, all-digital phase-shifting PWM modulation technology, IGBT works in zero voltage turn-on and zero current shutdown state, effectively reducing the impact and loss of IGBT, faster protection, more stable equipment, and revolutionizing the problem of blowing up the machine that has plagued users for a long time The digital stepless adjustment realizes 20%~100% linear adjustable power, and is also compatible with 0~5VDC and 4~20mA analog PID control power outputto ensure more accurate and stable temperature control The RS485 communication interface is added, and the modbus RTU efficient data transmission technology is adopted, which can realize the remote centralized control and management of the controller, which can meet the requirements and needs of customers at a higher level Add 2 load temperature detection interfaces, connect thermistors, detect temperature range 0~150°C, accuracy up to ±1°C; Using the open application platform, customers can automatically measure the working frequency, input current, coil output current,IGBT temperature, PWM phase difference and other parameters through the digital programming display, and can also set various application parameters according to the need, which is convenient for installation and debugging, and even secondary development and application (please refer to the display operation instructions later for specific setting operations).； It has a fully electrically isolated soft start heating/stop mode control interface, which is easy to connect with the thermostat for control, and the start and power rise time is Using imported high-speed DC cooling fans, the full-bridge 30KW, 40KW, 50KW, 60KW, 80KW and 100KW can be made into a domestic original "water cooling + air cooling" dual heat dissipation system, the heat dissipation effect is stronger, and the equipment operation is more stable and safer It has the protection functions of heating coil short circuit, open circuit, power supply phase loss, overheating, overcurrent, overvoltage, etc.,130% overload and no-load instantaneous protection function, protection response time ≤2uS, more complete functions, faster protection speed; You can set 1~255 days of running time, automatic shutdown after the timer, you must enter the password to start the machine, the user can set and modify the password at will, effectively overcome the problem of difficult to collect the project money; Using the domestic original coil intelligent identification technology, it automatically detects the coil parameters and adjusts the output power to achieve the best state, and the coil has wide compatibility, which can be compatible with the same model products of other companies; Strong anti-interference ability, soft start, high reliability and electrical isolation, can control multiple controllers to start/stop at the same time on the same heating element without interfering with each other; The original imported Infineon IGBT module of the world's famous brand is adopted, and the imported special IGBT module driver is used to ensure the continuous safe and stable operation of the equipment for a long time; Industrial-grade components, 100% tested by high temperature aging, to ensure long-term continuous and reliable work in 50°C industrial environment for 24 hours, service life ≥ 50000Hrs; The product comes standard with the following equipment: chassis, radiator and high-speed DC cooling fan integration, display, industrial indicator with space plug, R/S soft start space plug; Advantages of the company's productsThe power supply adopts a wide voltage design, 310V~450V constant power output, especially suitable for the occasion of large grid voltage fluctuations; Using the original imported Infineon IGBT module half-bridge/full-bridge control technology, the product quality is more stable, the anti-interference ability is stronger, suitable for commercial/industrial long-term continuous work, and theproduct start-up time and control reflection speed is faster than peers, and the temperature control is more accurate It adopts the latest third-generation digital processing platform technology, embedded 32-bit processing system, all-digital phase-shifting PWM modulation technology, digital stepless adjustment power of 20~100%, and increases PID interface control function, input 0~5VDC to control the power output, so that the heating temperature control is more accurate and stable, and is more suitable for the production of various heating equipment The RS485 communication interface is added, and the modbus RTU efficient data transmission technology is adopted, which can realize the remote centralized control and management of the controller, which can meet the requirements and needs of customers at a higher level The built-in digital programming display can automatically measure the working current, working frequency, IGBT temperature, PWM parameters, and can also set the working time and password lock, that is, when the time comes, the controller will automatically stop working and must enter the password to restart, which is especially suitable for the promotion of electromagnetic heating energy-saving transformation to prevent difficulties and disputes in collecting payments; The product adopts an open application platform, and customers can set various parameters through the programming display, which is more suitable for the supporting production of various equipment, as well as the secondary development and application of the system; It has perfect protection functions such as short circuit, open circuit, phase loss, overheating, overcurrent, overvoltage, etc.,to ensure that the product does not burn the plate when working continuously for a long time, with more complete functions and faster protection speed Using the domestic original coil intelligent identification technology, it automatically detects the coil parameters and adjusts the output power to achieve the best state, and the coil has wide compatibility, which can be compatible with and replace the same model products of other companies; The introduction of advanced production technology from Japan, the product has undergone strict functional testing and high-temperature aging test before leaving the factory to ensure that the product works continuously and reliably for 24 hours in a 50°C industrial environment for a long time, and theservice life is ≥ 50000Hrs System wiring description and schematic diagramAn external working indicator is always on when it is working normally, and the working indicator is flashing when it is in the state of stopping work or protection R/S is a soft-start interface that controls the controller to start/stop, working when it is in a short circuit and stopping when it is disconnected. Three-phase electricity R, S, T are 380V power input, L1 and L2 are output terminals connected to heating coils (such as controller wiring diagram); Coil reference parameters: (Please refer to the comparison table below for details).Digital full-bridge 60KW: mica wrapped glass fiber braided high-temperature cable, cross-section national standard 35mm² or double 16mm² winding, inductance of 100~120uH, about length: 35~40m (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 20~30mm, flat coil: 10~15mm, rated working current: 85~90A, frequency: 10K~20KHZ; | kernal | In Stock | New Sealed Under Guarantee | | |
Single-phase 3KW(Half-bridge Controller) | Electrical specifications of the product Rated voltage frequency: AC 220V/50Hz Voltage adaptation range: 100V~260V Rated power: 3KW (power adjustable range is 20~100%), rated working current: 12~14A Adaptability to the environment Temperature: -20°C~50°C Humidity: ≤95% Basic performance overview Voltage and power characteristics: 210~260V constant power output; Thermal efficiency≥ 95%; IGBT overheat protection temperature: 85±5°C; Working frequency: 5~40KHz; Based on 32-bit DSP all-digital processor, half-bridge series resonance; Using highly reliable digital phase-locked loop control technology, digital stepless adjustment, the power can be set through the digital display, and can also be adjusted by external potentiometer, and it is also compatible with 0~5VDC or 4~20mA analog PID to control the power output, and the power is 20%~100% adjustable; It has a fully galvanically isolated soft-start control interface (short-circuit start/disconnect stop) for easy connection with the thermostat, and a 12V/24V input start/stop mode control interface for easy connection with various solid-state relays (there is a voltage input to work, otherwise stop heating, when using this function, the soft-start interface should be empty, and the short-circuit ring needs to be removed)., the control response speed is fast, and the start-up time is It has the protection functions of heating coil short circuit and open circuit, 130% overload and no-load instantaneous protection function, and the protection response time ≤2uS; The coil has wide compatibility and can be compatible with the same model products of other companies; Strong anti-interference ability, 30 controllers can be controlled to start/stop at the same time on the same heating body without interfering with each other; With the open application platform, users can automatically read important parameters such as current, frequency, phase difference, temperature and so on with our special digital programming display, and can also set various application parameters as needed, making installation and debugging more simple and convenient You can set 1~255 days of working time, automatically lock after the timer is completed, you need to enter the password to restart, and you can also set 6 groups of timing on/off according to your needs; Built-in modbus RTU communication protocol, with 485 interface, can be external contact touch screen, can also easily achieve remote control; Using industrial-grade components, 100% of them have been tested by high temperature aging, to ensure 24 hours of continuous and reliable work in the industrial environment of 50°C for a long time, and the average trouble-free service life: ≥50000Hrs; Factory standard configuration: control board radiator and cooling fan integration; Physical size: length 195mm * width 120mm * height 100mm (including fan) The advantages of the company's electromagnetic heating plate The power supply adopts a wide voltage design, with a constant power output of 210V~260V, which is especially suitable for the occasion of large grid voltage fluctuations; Adopting two original imported IGBT half-bridge series resonant structure, the product quality is more stable, the anti-interference ability is stronger, and the continuous work for a long time does not burn the plate; The power can be set by the digital display, and can also be adjusted by an external potentiometer, and it is also compatible with 0~5VDC or 4~20mA analog PID to control the power output, so that the heating temperature control is more accurate, and it is more suitable for the production of various heating equipment; The working time can be set for password locking, which can effectively prevent the problem of difficult collection of project funds, and can also set 6 groups of timed on/off according to the need, which is more intelligent and more convenient to use in areas with peak and valley electricity prices; It comes with 485 interface, which can be touched externally, and can also be easily controlled and centralized, which is conducive to the secondary development of equipment and the comprehensive management of the factory; Add 12V/24V voltage control interface, which is convenient for SSR solid state relay control; The national unified warranty is 1 year, the product is maintained for life, and the whole process of technical guidance and service allows you to have no worries. System wiring description and schematic diagram Two indicator lights, one indicator on the board + external DC 12V working indicator, always on when working normally, flashing when not working. Soft Boot This interface is a soft start/stop control interface, which works when it is short-circuited and stops when it is disconnected (the short-circuit piece of the next socket must be removed when using this interface for control). AC-L and AC-N are 220V power inputs, and OUT1 and OUT2 are output terminals connected to heating coils. Coil reference parameters: (Please refer to the comparison table below for details). Mica winding glass fiber braided high-temperature resistant cable, cross-section national standard 4mm² inductance is 90~110uH, about 18~22m (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~, flat coil: 10~15mm, quota working current: 12~14A, general working frequency: 10K~20KHZ.25mm The potentiometer can adjust the power size, which is large clockwise and small vice versa. (Suitable for every product) When installing, please pay attention to the heat sink is electrified, hands and other conductive objects should never be touched, and the shell must be reliably grounded. | kernal | In Stock | New Sealed Under Guarantee | | |
Single-phase 3.5KW(Half-bridge Controller) | Electrical specifications of the product Rated voltage frequency: AC 220V/50Hz Voltage adaptation range: 100V~260V Rated power: 3.5KW (power adjustable range is 20~100%), rated working current: 14~16A Adaptability to the environment Temperature: -20°C~50°C; Humidity: ≤95%; Basic performance overview Voltage and power characteristics: 210~260V constant power output; Thermal efficiency≥ 95%; IGBT overheat protection temperature: 85±5°C; Working frequency: 5~40KHz; Based on 32-bit DSP all-digital processor, half-bridge series resonance; Using highly reliable digital phase-locked loop control technology, digital stepless adjustment, the power can be set through the digital display, and can also be adjusted by external potentiometer, and it is also compatible with 0~5VDC or 4~20mA analog PID to control the power output, and the power is 20%~100% adjustable; It has a completely electrically isolated soft start control interface (short circuit start/disconnect stop), which is easy to connect with the thermostat, and there is also a 12V/24V input start/stop mode control interface, which is convenient to connect with various solid state relays (there is a voltage input to work, on the contrary, stop heating, when using this function, the soft start interface will be empty, and the short circuit ring needs to be removed), the control response speed is fast, and the start time is It has the protection functions of heating coil short circuit and open circuit, 130% overload and no-load instantaneous protection function, and the protection response time ≤2uS; The coil has wide compatibility and can be compatible with the same model products of other companies; Strong anti-interference ability, 30 controllers can be controlled to start/stop at the same time on the same heating body without interfering with each other; With the open application platform, users can automatically read important parameters such as current, frequency, phase difference, temperature and so on with our company's special digital programming display, and can also set various application parameters as needed, making installation and debugging more simple and convenient; You can set 1~255 days of working time, automatically lock after the timer is completed, you need to enter the password to restart, and you can also set 6 groups of timing on/off according to your needs; Built-in modbus RTU communication protocol, with 485 interface, can be external contact touch screen, can also easily achieve remote control; Industrial-grade components, 100% tested by high temperature aging, to ensure long-term continuous and reliable work in 50°C industrial environment for 24 hours, average trouble-free service life: ≥50000Hrs; Factory standard configuration: integrated control board radiator, 1 external industrial indicator light; The physical size of the control board: length 220mm * width * height, customers must be equipped with a cooling fan (/220V)165mm90mm150mm The advantages of the company's electromagnetic heating plate The power supply adopts a wide voltage design, 210V~260V constant power output, especially suitable for the occasion of large grid voltage fluctuations It adopts 4 original imported IGBT half-bridge series resonant structure, the product quality is more stable, the anti-interference ability is stronger, and the continuous work for a long time does not burn the plate The power can be set by the digital display, and it can also be adjusted by an external potentiometer, and it is also compatible with 0~5VDC or 4~20mA analog PID to control the power output, so that the heating temperature control is more accurate, and it is more suitable for the production of various heating equipment The working time can be set for password locking, which can effectively prevent the problem of difficult collection of project funds, and can also set 6 groups of timed on/off according to the need, which is more intelligent and more convenient to use in areas with peak and valley electricity prices; It comes with 485 interface, which can be touched externally, and can also be easily controlled and centralized, which is conducive to the secondary development of equipment and the comprehensive management of the factory; Add 12V/24V voltage control interface, which is convenient for SSR solid state relay control; National unified warranty for 1 year, product lifetime maintenance, full technical guidance and service, so that you have no worries; System wiring description and schematic diagram 2 indicators, red power indicator and green working indicator (external work indicator), Power and Work are lit at the same time when working normally, the working indicator is flashing when the heat preservation state is shining, and the working indicator light flashes quickly when the fault state is shining; Soft Boot This terminal is used to start/stop. It works when it is closed, and stops when it is disconnected. Note: There is a short-circuit piece on the socket next to the green socket (Soft Boot terminal) at the factory, the socket has the same function as the green socket, if the green socket is used for control, the short-circuit piece must be removed, if the short-circuit piece is not removed, the control board will be automatically started when it is powered on; AC-L and AC-N are 220V power inputs, and OUT1 and OUT2 are output terminals connected to heating coils. When installing, it should be noted that the radiator is live, do not touch the shell, and the shell must be reliably grounded; Coil reference parameters: (Please refer to the comparison table below for details). Mica winding glass fiber braided high-temperature resistant cable, cross-section national standard 6mm² inductance is 80~100uH, about 15~17m (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~, flat coil: 10~15mm, quota working current: 14~16A, frequency: 10K~20KHZ.25mm | | In Stock | New Sealed Under Guarantee | | |
Three-phase 5KW(Half-bridge control board) | Electrical specifications of the product 1.Rated voltage frequency: AC 380V/50Hz 2.Voltage adaptation range: 310V~450V 3.Rated power: 5KW and 8KW (adjustable range of 20~100% respectively). Adaptability to the environmentTemperature: -20°C~;50℃ Humidity: ≤95% Basic performance overviewVoltage and power characteristics: 310~450V constant power output; Thermal efficiency≥ 95%; IGBT overheat protection temperature: 85±5°C; Working frequency: 5~40KHz; Industrial-grade high-reliability AVR microcontroller, half-bridge series resonance; Using highly reliable digital phase-locked loop control technology, theIGBT works in the zero-voltage turn-on and zero-current shutdown state, which effectively reduces the impact and loss of the IGBT, and revolutionizes the problem that has plagued users for a long time The digital stepless adjustment realizes 20%~100% adjustable power, and is also compatible with 0~5VDC and 4~20mA analog PID control power output; It has a completely electrically isolated soft start heating/stop mode control interface, which is easy to connect with the thermostat, and a 12V/24V input start/stop mode control interface, which is convenient to connect with various solid-state relays (there is a voltage input to work, otherwise stop heating), the control response speed is fast, and the start time is It has the function of heating coil short circuit and open circuit protection, 130% overload and no-load instantaneous protection function, and the protection response time ≤2uS; Add a load temperature detection interface, connect the thermistor, the detection temperature range is 0~150°C, and the accuracy is up to ±1°C The coil has wide compatibility and can be compatible with the same model products of other companies; Strong anti-interference ability, soft start, high reliability and electrical isolation, 30 controllers can be controlled to start/stop at the same time on the same heating body without interfering with each other; With the open application platform, users can automatically read important parameters such as current, frequency, phase difference, temperature and so on with our special digital programming display, and can also set various application parameters as needed,making installation and debugging more simple and convenient You can set 1~255 days of working time, and it will be automatically turned off when the timer is completed, and you need to enter the password to restart; Industrial-grade components, 100% of which have been tested by high temperature aging, ensure 24 hours of continuous and reliable work in the 50°C industrial environment for a long time, and the average trouble-free service life ≥50000Hrs; Factory standard configuration: control board and radiator integration, 1 industrial indicator light Physical size: length 225mm * width * height, with additional cooling fan (380V/ or 24V/500mA DC fan);220mm110mm150mm The advantages of the company's electromagnetic heating plateThe power supply adopts a wide voltage design, 310V~450V constant power output, especially suitable for the occasion of large grid voltage fluctuations; The product adopts industrial-grade AVR all-digital phase-locked loop control technology, with digital stepless power adjustment of 20~100%, and adds 5VDC and 4~20mA analog PID control interface, which makes the power control more accurate and stable, and is more suitable for the production of various equipment; It has perfect protection functions such as short-circuit and open-circuit protection, no-load and overload protection, over-temperature and over-current, etc., to ensure that the product does not burn the board for a long time; Using 4 pieces of 60A original imported Fairchild IGBT half-bridge series resonant structure, the product quality is more stable, the anti-interference ability is stronger, the long-term continuous work does not burn the board, and the product start-up time and controlled reflection speed are faster than peers, and the temperature control is more accurate; Add 12V/24V voltage control interface, which is convenient for solid state relay control; The introduction of advanced production technology from Japan, the products have undergone strict functional tests and high-temperature aging tests before leaving the factory to ensure that the products work continuously and reliably for 24 hours in a 50°C industrial environment for a long time, and theservice life is ≥ 50000Hrs; System wiring description and schematic diagramThree indicators, power indicator and work light (two work lights, one on the board, one external), Power and Work are on at the same time when working normally, and the Work indicator is flashing when it is in the state of stop work or protection When leaving the factory, it is equipped with a 12V external indicator light for the user to lead the working indicator light on the board to the outside of the electrical box; Soft Boot This terminal is used to start/stop. Working when it is closed, stopping when it is disconnected;Note: There is a short-circuit piece on the socket next to the green socket (Soft Boot terminal) at the factory, the socket has the same function as the green socket, if the green socket is used for control, the short-circuit piece must be removed, if the short-circuit piece is not removed, there is no need to connect the green socket, and the control board will be automatically started when it is powered on;Three-phase electricity A, B, C are 380V power input, OUT1 and OUT2 are output terminals connected to heating coils; When installing, it should be noted that the radiator is live, do not touch the shell, and the shell is reliably grounded; Coil reference parameters: (Please refer to the comparison table below for details).Three-phase 5KW: mica winding glass fiber braided high-temperature cable, cross-section national standard 6mm² inductance is 250~300uH, approximate length: 45~ (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~, flat coil: 10~15mm, rated working current: 7~, frequency: 10K~20KHZ50m25mm8A Three-phase 8KW: mica wrapped glass fiber braided high-temperature cable, cross-section national standard 10mm² inductance is 200~250uH, approximate length: 40~ (excluding lead length), the thickness of the insulation cotton is required to be about 15~, tubular coil: 10~15mm, rated working current: 10~, frequency: 10K~20KHZ45m25mm12A | kernal | In Stock | New Sealed Under Guarantee | | |
Three-phase 5KW(Half-bridge Controller) | Electrical specifications of the productRated voltage frequency: AC 220V/50Hz Voltage adaptation range: 100V~260V Rated power: 5KW (power adjustable range is 20~100%), rated working current: 20~22A Adaptability to the environmentTemperature: -20°C~50°C Humidity: ≤95% Basic performance overviewVoltage and power characteristics: 210~260V constant power output; Thermal efficiency≥ 95%; IGBT overheat protection temperature: 85±5°C; Working frequency: 5~40KHz; Based on 32-bit DSP all-digital processor, half-bridge series resonance; Using highly reliable digital phase-locked loop control technology, digital stepless adjustment, the power can be set through the digital display, and can also be adjusted by external potentiometer, and it is also compatible with 0~5VDC or 4~20mA analog PID to control the power output, and the power is 20%~100% adjustable; It has a fully galvanically isolated soft-start control interface (short-circuit start/disconnect stop) for easy connection with the thermostat, and a 12V/24V input start/stop mode control interface for easy connection with various solid-state relays (there is a voltage input to work, otherwise stop heating, when using this function, the soft-start interface should be empty, and the short-circuit ring needs to be removed)., the control response speed is fast, and the start-up time is It has the protection functions of heating coil short circuit and open circuit, 130% overload and no-load instantaneous protection function, and the protection response time ≤2uS; The coil has wide compatibility and can be compatible with the same model products of other companies; Strong anti-interference ability, 30 controllers can be controlled to start/stop at the same time on the same heating body without interfering with each other; With the open application platform, users can automatically read important parameters such as current, frequency, phase difference, temperature and so on with our special digital programming display, and can also set various application parameters as needed,making installation and debugging more simple and convenient You can set 1~255 days of working time, automatically lock after the timer is completed, you need to enter the password to restart, and you can also set 6 groups of timing on/off according to your needs; Built-in modbus RTU communication protocol, with 485 interface, can be external contact touch screen, can also easily achieve remote control; Using industrial-grade components, 100% of them have been tested by high temperature aging, to ensure 24 hours of continuous and reliable work in the industrial environment of 50°C for a long time, and the average trouble-free service life:≥50000Hrs; Factory standard configuration: integrated control board radiator, 1 external industrial indicator light; Physical size: length 220mm * width * height, customers must be equipped with a cooling fan (/220V);165mm90mm150mm The advantages of the company's electromagnetic heating plateThe power supply adopts a wide voltage design, with a constant power output of 210V~260V, which is especially suitable for the occasion of large grid voltage fluctuations; It adopts 4 60A original imported IGBT half-bridge series resonant structure, the product quality is more stable, the anti-interference ability is stronger, and the board is not burned for a long time continuous work; The power can be set by the digital display, and can also be adjusted by an external potentiometer, and it is also compatible with 0~5VDC or 4~20mA analog PID to control the power output, so that the heating temperature control is more accurate, and it is more suitable for the production of various heating equipment; The working time can be set for password locking, which can effectively prevent the problem of difficult collection of project funds, and can also set 6 groups of timed on/off according to the need, which is more intelligent and more convenient to use in areas with peak and valley electricity prices; It comes with 485 interface, which can be touched externally, and can also be easily controlled and centralized, which is conducive to the secondary development of equipment and the comprehensive management of the factory; Add 12V/24V voltage control interface, which is convenient for SSR solid state relay control; The national unified warranty is 1 year, the product is maintained for life, and the whole process of technical guidance and service allows you to have no worries. System wiring description and schematic diagramTwoindicators, red power indicator and green working indicator (external work indicator), Power and Work are lit at the same time when working normally, the working indicator is flashing when the heat preservation state is shining, and the working indicator light flashes quickly when the fault state is shining; Soft Boot This terminal is used to start/stop. It works when it is closed, and stops when is disconnected.Note: There is a short-circuit piece on the socket next to the green socket (Soft Boot terminal) at the factory, the socket has the same function as the green socket, if the green socket is used for control, the short-circuit piece must be removed, if the short-circuit piece is not removed, the control board will be automatically started when it is powered on;AC-L and AC-N are 220V power inputs, and OUT1 and OUT2 are output terminals connected to heating coils. When installing, it should be noted that the radiator is live, do not touch the shell, and the shell must be reliably grounded; Coil reference parameters: (Please refer to the comparison table below for details).Mica winding glass fiber braided high-temperature resistant cable, cross-section national standard 8~10mm² inductance is 60~80uH, about 12~15m in length (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~25mm, flat coil: 10~15mm, quota working current: 20~22A, frequency: 10K~20KHZ. | kernal | In Stock | New Sealed Under Guarantee | | |
Three-phase 8KW(Half-bridge control board) | Electrical specifications of the product 1.Rated voltage frequency: AC 380V/50Hz 2.Voltage adaptation range: 310V~450V 3.Rated power: 5KW and 8KW (adjustable range of 20~100% respectively). Adaptability to the environmentTemperature: -20°C~;50℃ Humidity: ≤95% Basic performance overviewVoltage and power characteristics: 310~450V constant power output; Thermal efficiency≥ 95%; IGBT overheat protection temperature: 85±5°C; Working frequency: 5~40KHz; Industrial-grade high-reliability AVR microcontroller, half-bridge series resonance; Using highly reliable digital phase-locked loop control technology, theIGBT works in the zero-voltage turn-on and zero-current shutdown state, which effectively reduces the impact and loss of the IGBT, and revolutionizes the problem that has plagued users for a long time The digital stepless adjustment realizes 20%~100% adjustable power, and is also compatible with 0~5VDC and 4~20mA analog PID control power output; It has a completely electrically isolated soft start heating/stop mode control interface, which is easy to connect with the thermostat, and a 12V/24V input start/stop mode control interface, which is convenient to connect with various solid-state relays (there is a voltage input to work, otherwise stop heating), the control response speed is fast, and the start time is It has the function of heating coil short circuit and open circuit protection, 130% overload and no-load instantaneous protection function, and the protection response time ≤2uS; Add a load temperature detection interface, connect the thermistor, the detection temperature range is 0~150°C, and the accuracy is up to ±1°C The coil has wide compatibility and can be compatible with the same model products of other companies; Strong anti-interference ability, soft start, high reliability and electrical isolation, 30 controllers can be controlled to start/stop at the same time on the same heating body without interfering with each other; With the open application platform, users can automatically read important parameters such as current, frequency, phase difference, temperature and so on with our special digital programming display, and can also set various application parameters as needed,making installation and debugging more simple and convenient You can set 1~255 days of working time, and it will be automatically turned off when the timer is completed, and you need to enter the password to restart; Industrial-grade components, 100% of which have been tested by high temperature aging, ensure 24 hours of continuous and reliable work in the 50°C industrial environment for a long time, and the average trouble-free service life ≥50000Hrs; Factory standard configuration: control board and radiator integration, 1 industrial indicator light Physical size: length 225mm * width * height, with additional cooling fan (380V/ or 24V/500mA DC fan);220mm110mm150mm The advantages of the company's electromagnetic heating plateThe power supply adopts a wide voltage design, 310V~450V constant power output, especially suitable for the occasion of large grid voltage fluctuations; The product adopts industrial-grade AVR all-digital phase-locked loop control technology, with digital stepless power adjustment of 20~100%, and adds 5VDC and 4~20mA analog PID control interface, which makes the power control more accurate and stable, and is more suitable for the production of various equipment; It has perfect protection functions such as short-circuit and open-circuit protection, no-load and overload protection, over-temperature and over-current, etc., to ensure that the product does not burn the board for a long time; Using 4 pieces of 60A original imported Fairchild IGBT half-bridge series resonant structure, the product quality is more stable, the anti-interference ability is stronger, the long-term continuous work does not burn the board, and the product start-up time and controlled reflection speed are faster than peers, and the temperature control is more accurate; Add 12V/24V voltage control interface, which is convenient for solid state relay control; The introduction of advanced production technology from Japan, the products have undergone strict functional tests and high-temperature aging tests before leaving the factory to ensure that the products work continuously and reliably for 24 hours in a 50°C industrial environment for a long time, and theservice life is ≥ 50000Hrs; System wiring description and schematic diagramThree indicators, power indicator and work light (two work lights, one on the board, one external), Power and Work are on at the same time when working normally, and the Work indicator is flashing when it is in the state of stop work or protection When leaving the factory, it is equipped with a 12V external indicator light for the user to lead the working indicator light on the board to the outside of the electrical box; Soft Boot This terminal is used to start/stop. Working when it is closed, stopping when it is disconnected;Note: There is a short-circuit piece on the socket next to the green socket (Soft Boot terminal) at the factory, the socket has the same function as the green socket, if the green socket is used for control, the short-circuit piece must be removed, if the short-circuit piece is not removed, there is no need to connect the green socket, and the control board will be automatically started when it is powered on;Three-phase electricity A, B, C are 380V power input, OUT1 and OUT2 are output terminals connected to heating coils; When installing, it should be noted that the radiator is live, do not touch the shell, and the shell is reliably grounded; Coil reference parameters: (Please refer to the comparison table below for details).Three-phase 5KW: mica winding glass fiber braided high-temperature cable, cross-section national standard 6mm² inductance is 250~300uH, approximate length: 45~ (excluding lead length), the thickness of the insulation cotton is required to be about: tubular coil 15~, flat coil: 10~15mm, rated working current: 7~, frequency: 10K~20KHZ50m25mm8A Three-phase 8KW: mica wrapped glass fiber braided high-temperature cable, cross-section national standard 10mm² inductance is 200~250uH, approximate length: 40~45mm (excluding lead length), the thickness of the insulation cotton is required to be about 15~25mm, tubular coil: 10~15mm, rated working current: 10~12A, frequency: 10K~20KHZ | kernal | In Stock | New Sealed Under Guarantee | | |
| |
