All
      0
      Cart

      • OTHER

      • Popular
      • Newest
      • Most reviews

      Clock Generators and Frequency Synthesizers

      Clock Generators and Frequency Synthesizers
      ModelDescriptionBrandLeadingConditionPriceAction
      Clock Generators and Frequency Synthesizers
      5P49V5901B035NLGI8
      DescriptionThe 5P49V5901 is a programmable clock generator intended for high performance consumer, networking, industrial, computing, and data-communications applications. Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using I2C interface. This is IDTs fifth generation of programmable clock technology (VersaClock® 5).The frequencies are generated from a single reference clock. The reference clock can come from one of the two redundant clock inputs. A glitchless manual switchover function allows one of the redundant clocks to be selected during normal operation.Two select pins allow up to 4 different configurations to be programmed and accessible using processor GPIOs or bootstrapping. The different selections may be used for different operating modes (full function, partial function, partial power-down), regional standards (US, Japan, Europe) or system production margin testing.The device may be configured to use one of two I2C addresses to allow multiple devices to be used in a system.Features• Generates up to four independent output frequencies• High performance, low phase noise PLL, <0.7 ps RMStypical phase jitter on outputs:– PCIe Gen1, 2, 3 compliant clock capability– USB 3.0 compliant clock capability– 1 GbE and 10 GbE• Four fractional output dividers (FODs)• Independent Spread Spectrum capability on each outputpair• Four banks of internal non-volatile in-systemprogrammable or factory programmable OTP memory• I2C serial programming interface• One reference LVCMOS output clock• Four universal output pairs:– Each configurable as one differential output pair or twoLVCMOS outputs• I/O Standards:– Single-ended I/Os: 1.8V to 3.3V LVCMOS– Differential I/Os - LVPECL, LVDS and HCSL• Input frequency ranges:– LVCMOS Reference Clock Input (XIN/REF) – 1MHz to200MHz– LVDS, LVPECL, HCSL Differential Clock Input (CLKIN,CLKINB) – 1MHz to 350MHz– Crystal frequency range: 8MHz to 40MHz• Output frequency ranges:– LVCMOS Clock Outputs – 1MHz to 200MHz– LVDS, LVPECL, HCSL Differential Clock Outputs –1MHz to 350MHz• Individually selectable output voltage (1.8V, 2.5V, 3.3V) foreach output pair• Redundant clock inputs with manual switchover• Programmable loop bandwidth• Programmable output to output skew• Programmable slew rate control• Programmable crystal load capacitance• Individual output enable/disable• Power-down mode• 1.8V, 2.5V or 3.3V core VDDD, VDDA• Available in 24-pin VFQFPN 4mm x 4mm package• -40° to +85°C industrial temperature operationApplications• Ethernet switch/router• PCI Express 1.0/2.0/3.0• Broadcast video/audio timing• Multi-function printer• Processor and FPGA clocking• Any-frequency clock conversion• MSAN/DSLAM/PON• Fiber Channel, SAN• Telecom line cards• 1 GbE and 10 GbE
      		OTHERIn StockNew Sealed Under Guarantee
      5P49V5901B622NLGI8
      DescriptionThe 5P49V5901 is a programmable clock generator intended for high performance consumer, networking, industrial, computing, and data-communications applications. Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using I2C interface. This is IDTs fifth generation of programmable clock technology (VersaClock® 5).The frequencies are generated from a single reference clock. The reference clock can come from one of the two redundant clock inputs. A glitchless manual switchover function allows one of the redundant clocks to be selected during normal operation.Two select pins allow up to 4 different configurations to be programmed and accessible using processor GPIOs or bootstrapping. The different selections may be used for different operating modes (full function, partial function, partial power-down), regional standards (US, Japan, Europe) or system production margin testing.The device may be configured to use one of two I2C addresses to allow multiple devices to be used in a system.Features• Generates up to four independent output frequencies• High performance, low phase noise PLL, <0.7 ps RMStypical phase jitter on outputs:– PCIe Gen1, 2, 3 compliant clock capability– USB 3.0 compliant clock capability– 1 GbE and 10 GbE• Four fractional output dividers (FODs)• Independent Spread Spectrum capability on each outputpair• Four banks of internal non-volatile in-systemprogrammable or factory programmable OTP memory• I2C serial programming interface• One reference LVCMOS output clock• Four universal output pairs:– Each configurable as one differential output pair or twoLVCMOS outputs• I/O Standards:– Single-ended I/Os: 1.8V to 3.3V LVCMOS– Differential I/Os - LVPECL, LVDS and HCSL• Input frequency ranges:– LVCMOS Reference Clock Input (XIN/REF) – 1MHz to200MHz– LVDS, LVPECL, HCSL Differential Clock Input (CLKIN,CLKINB) – 1MHz to 350MHz– Crystal frequency range: 8MHz to 40MHz• Output frequency ranges:– LVCMOS Clock Outputs – 1MHz to 200MHz– LVDS, LVPECL, HCSL Differential Clock Outputs –1MHz to 350MHz• Individually selectable output voltage (1.8V, 2.5V, 3.3V) foreach output pair• Redundant clock inputs with manual switchover• Programmable loop bandwidth• Programmable output to output skew• Programmable slew rate control• Programmable crystal load capacitance• Individual output enable/disable• Power-down mode• 1.8V, 2.5V or 3.3V core VDDD, VDDA• Available in 24-pin VFQFPN 4mm x 4mm package• -40° to +85°C industrial temperature operationApplications• Ethernet switch/router• PCI Express 1.0/2.0/3.0• Broadcast video/audio timing• Multi-function printer• Processor and FPGA clocking• Any-frequency clock conversion• MSAN/DSLAM/PON• Fiber Channel, SAN• Telecom line cards• 1 GbE and 10 GbE
      		OTHERIn StockNew Sealed Under Guarantee
      84321AYLFT
      The 84321AYLFT parts manufactured by IDT are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The 84321AYLFT components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.The production status marked on Jotrin.com is for reference only. If you did not find what you were looking for, you can get more value information by email, such as the 84321AYLFT Inventory quantity, preferential price, and manufacturer. We are always happy to hear from you so feel free to contact us.The 84321AYLF is IC SYNTHESIZER 260MHZ 32-LQFP, that includes 84321 Series, they are designed to operate with a Frequency Synthesizer Type, Packaging is shown on datasheet note for use in a Tray Alternate Packaging, that offers Unit Weight features such as 0.002568 oz, Package Case is designed to work in 32-LQFP, it has an Operating Temperature range of 0°C ~ 70°C, the device can also be used as Surface Mount Mounting Type. In addition, the Voltage Supply is 3.135 V ~ 3.465 V, the device is offered in 32-LQFP (7x7) Supplier Device Package, the device has a Yes with Bypass of PLL, and Input is Crystal, and the Output is LVPECL, and Number of Circuits is 1, and the Ratio Input:Output is 1899/12/30 1:02:00, and Differential Input:Output is No/Yes, and the Frequency Max is 260MHz, and Divider Multiplier is Yes/No, and the Part # Aliases is 84321 ICS84321AYLF.84321AYILFT with user guide, that includes 3.135 V ~ 3.465 V Voltage Supply, they are designed to operate with a Frequency Synthesizer Type, Supplier Device Package is shown on datasheet note for use in a 32-LQFP (7x7), that offers Ratio Input:Output features such as 1899/12/30 1:02:00, PLL is designed to work in Yes with Bypass, as well as the Tape & Reel (TR) Packaging, the device can also be used as 32-LQFP Package Case. In addition, the Output is LVPECL, it has an Operating Temperature range of -40°C ~ 85°C, the device has a 1 of Number of Circuits, and Mounting Type is Surface Mount, and the Input is Crystal, and Frequency Max is 260MHz, and the Divider Multiplier is Yes/No, and Differential Input:Output is No/Yes.84321AYILF with circuit diagram, that includes No/Yes Differential Input:Output, they are designed to operate with a Yes/No Divider Multiplier, Frequency Max is shown on datasheet note for use in a 260MHz, that offers Input features such as Crystal, Mounting Type is designed to work in Surface Mount, as well as the 1 Number of Circuits, it has an Operating Temperature range of -40°C ~ 85°C. In addition, the Output is LVPECL, the device is offered in 32-LQFP Package Case, the device has a Tray of Packaging, and PLL is Yes with Bypass, and the Ratio Input:Output is 1899/12/30 1:02:00, and Supplier Device Package is 32-LQFP (7x7), and the Type is Frequency Synthesizer, and Voltage Supply is 3.135 V ~ 3.465 V.
      		OTHERIn StockNew Sealed Under Guarantee
      8T49N524-004NLGI
      		OTHERIn StockNew Sealed Under Guarantee
      1.343304s