All
      0
      Cart

      • OTHER

      • Popular
      • Newest
      • Most reviews

      IC Chips1

      IC Chips1
      ModelDescriptionBrandLeadingConditionPriceAction
      IC Chips1
      MT57W512H36BF-6
      		OTHERIn StockNew Sealed Under Guarantee
      PALC16R4-30DMB
      		OTHERIn StockNew Sealed Under Guarantee
      PALCE16V8-7JC
      GENERAL DESCRIPTIONThe PALCE16V8 is an advanced PAL device built with low-power, high-speed, electrically-erasable CMOS technology. It is functionally compatible with all 20-pin GAL devices. The macrocells provide a universal device architecture. The PALCE16V8 will directly replace the PAL16R8 and PAL10H8 series devices, with the exception of the PAL16C1.DISTINCTIVE CHARACTERISTICS■ Pin and function compatible with all 20-pin GAL devices■ Electrically erasable CMOS technologyprovides reconfigurable logic and full testability■ High-speed CMOS technology— 5-ns propagation delay for “-5” version— 7.5-ns propagation delay for “-7” version■ Direct plug-in replacement for the PAL16R8series and most of the PAL10H8 series■ Outputs programmable as registered orcombinatorial in any combination■ Peripheral Component Interconnect (PCI) compliant■ Programmable output polarity■ Programmable enable/disable control■ Preloadable output registers for testability■ Automatic register reset on power up■ Cost-effective 20-pin plastic DIP, PLCC, and SOIC packages■ Extensive third-party software and programmersupport through FusionPLD partners■ Fully tested for 100% programming andfunctional yields and high reliability■ 5 ns version utilizes a split leadframe forimproved performance
      		OTHERIn StockNew Sealed Under Guarantee
      PALCE16V8L-15PC
      GENERAL DESCRIPTIONThe PALCE16V8 is an advanced PAL device built with low-power, high-speed, electrically-erasable CMOS technology. It is functionally compatible with all 20-pin GAL devices. The macrocells provide a universal device architecture. The PALCE16V8 will directly replace the PAL16R8 and PAL10H8 series devices, with the exception of the PAL16C1.DISTINCTIVE CHARACTERISTICS■ Pin and function compatible with all 20-pin GAL devices■ Electrically erasable CMOS technologyprovides reconfigurable logic and full testability■ High-speed CMOS technology— 5-ns propagation delay for “-5” version— 7.5-ns propagation delay for “-7” version■ Direct plug-in replacement for the PAL16R8series and most of the PAL10H8 series■ Outputs programmable as registered orcombinatorial in any combination■ Peripheral Component Interconnect (PCI) compliant■ Programmable output polarity■ Programmable enable/disable control■ Preloadable output registers for testability■ Automatic register reset on power up■ Cost-effective 20-pin plastic DIP, PLCC, and SOIC packages■ Extensive third-party software and programmersupport through FusionPLD partners■ Fully tested for 100% programming andfunctional yields and high reliability■ 5 ns version utilizes a split leadframe forimproved performance
      		OTHERIn StockNew Sealed Under Guarantee
      PALCE20V8-15JC
      GENERAL DESCRIPTIONThe PALCE20V8 is an advanced PAL device built with low-power, high-speed, electrically erasable CMOS technology. Its macrocells provide a universal device architecture. The PALCE20V8 is fully compatible with the GAL20V8 and can directly replace PAL20R8 series devices and most 24-pin combinatorial PAL devices.Device logic is automatically configured according to the user’s design specification. A design is implemented using any of a number of popular design software packages, allowing automatic creation of a programming file based on Boolean or state equations. Design software also verifies the design and can provide test vectors for the finished device. Programming can be accomplished on standard PAL device programmers.DISTINCTIVE CHARACTERISTICS◆ Pin and function compatible with all PAL® 20V8 devices◆ Electrically erasable CMOS technology provides reconfigurable logic and full testability◆ High-speed CMOS technology— 5-ns propagation delay for “-5” version— 7.5-ns propagation delay for “-7” version◆ Direct plug-in replacement for a wide range of 24-pin PAL devices◆ Programmable enable/disable control◆ Outputs individually programmable as registered or combinatorial◆ Peripheral Component Interconnect (PCI) compliant◆ Preloadable output registers for testability◆ Automatic register reset on power-up◆ Cost-effective 24-pin plastic SKINNY DIP and 28-pin PLCC packages◆ Extensive third-party software and programmer support◆ Fully tested for 100% programming and functional yields and high reliability◆ Programmable output polarity◆ 5-ns version utilizes a split leadframe for improved performance
      		OTHERIn StockNew Sealed Under Guarantee
      PALCE20V8-15JC
      GENERAL DESCRIPTIONThe PALCE20V8 is an advanced PAL device built with low-power, high-speed, electrically erasable CMOS technology. Its macrocells provide a universal device architecture. The PALCE20V8 is fully compatible with the GAL20V8 and can directly replace PAL20R8 series devices and most 24-pin combinatorial PAL devices.Device logic is automatically configured according to the user’s design specification. A design is implemented using any of a number of popular design software packages, allowing automatic creation of a programming file based on Boolean or state equations. Design software also verifies the design and can provide test vectors for the finished device. Programming can be accomplished on standard PAL device programmers.DISTINCTIVE CHARACTERISTICS◆ Pin and function compatible with all PAL® 20V8 devices◆ Electrically erasable CMOS technology provides reconfigurable logic and full testability◆ High-speed CMOS technology— 5-ns propagation delay for “-5” version— 7.5-ns propagation delay for “-7” version◆ Direct plug-in replacement for a wide range of 24-pin PAL devices◆ Programmable enable/disable control◆ Outputs individually programmable as registered or combinatorial◆ Peripheral Component Interconnect (PCI) compliant◆ Preloadable output registers for testability◆ Automatic register reset on power-up◆ Cost-effective 24-pin plastic SKINNY DIP and 28-pin PLCC packages◆ Extensive third-party software and programmer support◆ Fully tested for 100% programming and functional yields and high reliability◆ Programmable output polarity◆ 5-ns version utilizes a split leadframe for improved performance
      		OTHERIn StockNew Sealed Under Guarantee
      SL11R-IDE-B1.2
      OverviewThe SL11R is a low-cost, high-speed Universal Serial Bus (USB) RISC based Controller. It contains a 16-bit RISC processor with built-in SL11R BIOS ROM to greatly reduce firmware development work. Its 2-wire serial EEPROM interface offers low cost storage for USB device configuration and customer’s product-specific functions. New functions can be programmed into the 2-wire serial interface by downloading them from a USB Host PC. This unique architecture provides the ability to upgrade products in the field without changing the peripheral hardware.SL11R Features• Cypress offers a Development Kit for each of its product lines. These Development Kits include multiple peripheral Mini-port class drivers for Windows 98/ME/2000, firmware source code and demo USB source code for a variety of applications. Also available is an SL11R “C” compiler, debugger, and assembler with a reference demo board.• 48 MHz 16 bit RISC Processor• Up to 16 bits of Programmable Bidirectional Data I/O• Up to 32 bits of General Purpose I/O (GPIO)• 6Kx8 internal Mask ROM with built-in BIOS in supporting a comprehensive list of interrupt calls (see [Ref. 1] SL11R_BIOS for detailed information). These include USB functions, 2-wire serial interface, and UART and Boot-Up options (Boot-up from 2-wire serial interface or External ROM). Executable code can also run from 8-bit or 16-bit external Memory.• 3Kx8 internal RAM that can be configured as the USB Ping-Pong buffer for USB DATA0 and DATA1 packets. It also can be used for data and/or code.• Two-wire serial EEPROM interface port with SL11R BIOS support to allow on-board EEPROM programming• Flexible Programmable external memory wait-states and a 8/16 data path• Up to 16-bit address for Extended Memory Interface Port for External SRAM and ROM• On chip DRAM Controller• On chip fast EPP Interface• On chip 8/16-bit DMA data path interface• Supports 12 MHz/48MHz external crystal or clock• Executable code or data can be loaded either from the USB port or via the UART port. The code/data is moved to RAM for debugging purposes (using a break point register), or to be programmed via a two-wire serial EEPROM.• USB Port (12 Mbits/sec), including a built-in USB transceiver. All USB standard protocol modes are supported: Isochronous mode (up to 1024 packet size), Bulk, Interrupt, and Control modes.• There are four available Endpoints. Each endpoint utilizes a bidirectional DMA port to move data between the Memory and the USB. Data can be sent/received to/from the Data Port Independently.• Two General Purpose Timers, a Watchdog timer (WDT), four programmable PWM channels, and four Programmable Timing Generator outputs• Four PWM or Programmable Timing Generator output channels are available. Each channel provides a programmable timing generator sequence that can be used to interface to various CCD, CIS, and CMOS image sensors, or can be used for other types of applications.• Suspend/Resume and Low Power modes are supported• UART interface supports from 900 Baud to 115.2K Baud• USB Generic Mini-Port Driver for WIN98/2000 is available• Debugger and QT-Assembler are available• “C” Compiler option available• Package: 100 LPQFP• Power requirements 3.3V
      		OTHERIn StockNew Sealed Under Guarantee
      W133HTR
      		OTHERIn StockNew Sealed Under Guarantee
      W150HTR
      		OTHERIn StockNew Sealed Under Guarantee
      W180-51SZ
      The W180-51SZ parts manufactured by CYPRESS are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The W180-51SZ components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.The production status marked on Jotrin.com is for reference only. If you did not find what you were looking for, you can get more value information by email, such as the W180-51SZ Inventory quantity, preferential price, and manufacturer. We are always happy to hear from you so feel free to contact us.W180-03SZT with pin details manufactured by CYPRESS. The W180-03SZT is available in SOP8 Package, is part of the IC Chips.The W180-51G is Clock Generator 8MHz to 28MHz-IN 28MHz-OUT 8-Pin SOIC manufactured by CYPRESS. The W180-51G is available in SOP8 Package, is part of the IC Chips, , and with support for Clock Generator 8MHz to 28MHz-IN 28MHz-OUT 8-Pin SOIC.W180-51GT with circuit diagram manufactured by CY. The W180-51GT is available in SOP-8 Package, is part of the IC Chips.
      		OTHERIn StockNew Sealed Under Guarantee
      5962-9311201MXA(CY7B992-7LMB)
      DescriptionThe HSSR-7110, HSSR-7111, HSSR-7112, HSSR-711E and SMD 5962-93140 are single channel power MOSFET opto couplers, constructed in eight-pin, hermetic, dual-in-line, ceramic packages. The devices operate exactly like a solid state relay.The products are capable of operation and storage over the full military temperature range and may be pur chased as a standard product (HSSR-7110), with full MIL PRF-38534 Class H testing (HSSR-7111 and HSSR- 7112), with MIL-PRF-38534 Class E testing (Class K with excep tions) (HSSR-711E) or from the DLA Standard Microcircuit Drawing (SMD) 5962-93140. Details of the Class E program may be found on page 11 of this datasheet.Features Dual Marked with Device Part Number and DLA Standard Microcircuit Drawing ac/dc Signal &Power Switching Compact Solid-State Bidirectional Switch Manufactured and Tested on a MIL-PRF-38534Certified Line QML-38534 MIL-PRF-38534 Class H Modified Space Level Processing Available (Class E) Hermetically Sealed 8-Pin Dual In-Line Package Small Size and Weight Performance Guaranteed over -55°C to 125°C Connection A0.8 A, 1.0 Ω Connection B1.6 A, 0.25 Ω 1500 Vdc Withstand Test Voltage High Transient Immunity 5 Amp Output Surge CurrentApplications Military and Space High Reliability Systems Standard 28 Vdc and 48 Vdc Load Driver Standard 24 Vac Load Driver Aircraft Controls ac/dc Electromechanical and Solid State Relay Replacement I/O Modules Harsh Industrial Environments
      		OTHERIn StockNew Sealed Under Guarantee
      AN2125SC
      IntroductionLike a well designed automobile or appliance, a USB peripheral’s outward simplicity hides internal complexity. There’s a lot going on “under the hood” of a USB device, which gives the user a new level of convenience. For example:• A USB device can be plugged in anytime, even when the PC is turned on.• When the PC detects that a USB device has been plugged in, it automatically interrogates the device to learn its capabilities and requirements. From this information, the PC automatically loads the device’s driver into the operating system. When the device is unplugged, the operating system automatically logs it off and unloads its driver.• USB devices do not use DIP switches, jumpers, or configuration programs. There is never an IRQ, DMA, MEMORY, or IO conflict with a USB device.• USB expansion hubs make the bus available to dozens of devices.• USB is fast enough for printers, CD-quality audio, and scanners.USB is defined in the Universal Serial Bus Specification Version 1.1 (http://usb.org), a 268-page document that describes all aspects of a USB device in elaborate detail. This EZ-USB Technical Reference Manual describes the EZ-USB chip along with USB topics that should provide help in understanding the Specification.
      		OTHERIn StockNew Sealed Under Guarantee
      C2453B
      DescriptionSC2453 is a high performance multi-output converter controller that can be configured for a variety of applications. The SC2453 utilizes synchronous rectified buck topologies where efficiency is most important. It also provides dedicated programmable positive and negative linear regulators using external transistors in conjunction with coupled windings to generate positive and negative voltages. Power up sequencing prevents converter latchups.Features◆ Two synchronized converters for low noise◆ Power up sequencing to prevent latch-ups◆ Out of phase operation for low input ripple◆ Over current protection◆ Wide input range, 4.5 to 30V◆ Programmable frequency up to 700KHz◆ Two synchronous bucks for high efficiency at high current◆ One dedicated programmable positive linear regulator and one dedicated programmable negative linear regulator◆ –40 to 105 degree C operating temperature◆ Output voltage as low as 0.5V◆ Small package TSSOP-28Applications◆ DSL applications with multiple input voltage requirements◆ Mixed-Signal applications requiring positive and negative voltages◆ Cable modem power management◆ Base station power management
      		OTHERIn StockNew Sealed Under Guarantee
      CG6637AA
      The CG6637AA parts manufactured by CYPRESS are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The CG6637AA components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.The production status marked on Jotrin.com is for reference only. If you did not find what you were looking for, you can get more value information by email, such as the CG6637AA Inventory quantity, preferential price, and manufacturer. We are always happy to hear from you so feel free to contact us.The CG66.5101.151 is PWR ENT MOD RCPT IEC320-C14 PNL, that includes CG Series, they are designed to operate with a Inlets Product, Packaging is shown on datasheet note for use in a Bulk, that offers Unit Weight features such as 3.280478 oz, Termination is designed to work in Quick Connect - 0.189" (4.8mm), as well as the Panel Mount, Flange Mounting Type, the device can also be used as Voltage Selector Features. In addition, the Ingress Protection is IP40, the device is offered in Receptacle, Male Blades - Module Connector Type, the device has a Filtered (EMI, RFI) - Commercial of Filter Type, and Approvals is cULus, ENEC, and the Number of Positions is 3, and Connector Style is IEC 320-C14, and the Material Flammability Rating is UL94 V-0, and Current IEC is 10A, and the Voltage IEC is 250VAC, and Current UL is 10A, and the Voltage UL is 125VAC, and Fuse is Yes, and the Switch Features is Switch On-Off, and Fuse Holder Drawer is Drawer Sold Separate, and the Panel Cutout Dimensions is Rectangular - 28.50mm x 81.00mm, and Switch Function is Switched, and the Filtered is Yes, and Fused is Yes.The CG652U050V3C is CAP ALUM 6500UF 50V SCREW, that includes 50V Voltage Rating, they are designed to operate with a -10%, +75% Tolerance, Size Dimension is shown on datasheet note for use in a 2.000" Dia (50.80mm), that offers Series features such as CG, Ripple Current is designed to work in 9.6A @ 120Hz, as well as the Polar Polarization, the device can also be used as Bulk Packaging. In addition, the Package Case is Radial, Can - Screw Terminals, it has an Operating Temperature range of -40°C ~ 85°C, the device has a Chassis Mount of Mounting Type, and Lifetime Temp# is 2000 Hrs @ 85°C, and the Height Seated Max is 3.125" (79.38mm), and ESR Equivalent Series Resistance is 17 mOhm @ 120Hz, and the Capacitance is 6500μF, and Applications is General Purpose.The CG6600SM is Gas Discharge Tubes - GDTs / Gas Plasma Arrestors 600V SMD Ultra Low 0.3pF, that includes 600 VDC DC Sparkover, they are designed to operate with a Failsafe Not Protected Failsafe Protection Y N, Insulation Resistance is shown on datasheet note for use in a 1 Gohms, that offers Mounting Style features such as SMD/SMT, Number of Electrodes is designed to work in 2 Electrode, it has an Operating Temperature Range range of - 40 C to + 90 C, the device can also be used as Reel Packaging. In addition, the Peak Pulse Current is 3 kA, the device is offered in CG6 Series, the device has a Multi-Stage Protector of Technology, and Termination Style is Solder Pad, and the Type is Gas Discharge Tube.
      		OTHERIn StockNew Sealed Under Guarantee
      CG7255AM
      DescriptionLittelfuse highly reliable CG/CG2 Series GDTs provide a high degree of surge protection in a small size ideal for board level circuit protection.GDTs function as switches which dissipate a minimum amount of energy and therefore handle currents that far surpass other types of transient voltage protection. Their gas-flled, rugged ceramic metal construction make them well suited to adverse environments.The CG/CG2 series comes in a variety of forms including surface mount, core, straight and shaped leads, to serve a variety of mounting methods.The CG Series (75-110V) is ideal for protection of test and communication equipment and other devices in which low voltage limits and extremely low arc voltages are required.The CG2 Series (145V-1000V) is ideal for protecting equipment where higher voltage limits and holdover voltages are necessary.Features• Rugged Ceramic-Metal construction• Low Capacitance (<1.5pf)• Meets REA PE-80• Available in surface mount, and a variety of lead options optionsApplications• Communication lines and equipment• CATV equipment• Test equipment• Data lines• Power supplies• Instrumentation circuits• Medical electronics• ADSL equipment• Telecom SLIC protection
      		OTHERIn StockNew Sealed Under Guarantee
      CP5721AM
      The CP5721AM parts manufactured by CYPRESS are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The CP5721AM components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.The production status marked on Jotrin.com is for reference only. If you did not find what you were looking for, you can get more value information by email, such as the CP5721AM Inventory quantity, preferential price, and manufacturer. We are always happy to hear from you so feel free to contact us.CP5607AMT with pin details manufactured by KEXIN. The CP5607AMT is available in SOP24 Package, is part of the IC Chips.CP5656AM with user guide manufactured by CYPRES. The CP5656AM is available in SOP Package, is part of the IC Chips.CP5698AM with circuit diagram manufactured by CY. The CP5698AM is available in DIP18 Package, is part of the IC Chips.
      		OTHERIn StockNew Sealed Under Guarantee
      CY1049CV33-10ZI
      The CY1049CV33-10ZI parts manufactured by CYPRESS are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The CY1049CV33-10ZI components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.The production status marked on Jotrin.com is for reference only. If you did not find what you were looking for, you can get more value information by email, such as the CY1049CV33-10ZI Inventory quantity, preferential price, and manufacturer. We are always happy to hear from you so feel free to contact us.CY101E383-3NC with pin details manufactured by CY. The CY101E383-3NC is available in QFP64 Package, is part of the IC Chips.CY1021CV33-12ZSXE with user guide manufactured by CY. The CY1021CV33-12ZSXE is available in TSOP Package, is part of the IC Chips.CY1024AP with circuit diagram manufactured by CYLINK. The CY1024AP is available in DIP28 Package, is part of the IC Chips.
      		OTHERIn StockNew Sealed Under Guarantee
      CY2030PVC-1
      		OTHERIn StockNew Sealed Under Guarantee
      CY2071ASC-395
      Functional DescriptionThe CY2071A is a general-purpose clock synthesizer designed for use in applications such as modems, disk drives, CD-ROM drives, video CD players, games, set-top boxes, and data/telecommunications. The device offers up to three configurable clock outputs in an 8-pin, 150-mil SOIC package and can operate off either a 3.3V or 5V power supply. The on-chip reference oscillator is designed for 10-MHz to 25-MHz crystals. Alternatively, an external reference clock of frequency between 1 MHz and 30 MHz can be used.FeaturesSingle phase-locked loop architectureEPROM programmabilityFactory-programmable (CY2071A, CY2071AI) or field-programmable (CY2071AF, CY2071AFI) device optionsUp to three configurable outputsLow-skew, low-jitter, high-accuracy outputsInternal loop filterPower management (OE)Frequency select optionsConfigurable 5V or 3.3V operation8-pin 150-mil SOIC packageBenefitsGenerates a custom frequency from an external sourceEasy customization and fast turnaroundProgramming support available for all opportunitiesGenerates three related frequencies from a single deviceMeets critical industry standard timing requirementsAlleviates the need for external componentsSupports low-power applications3 outputs with 2 user selectable frequenciesSupports industry standard design platformsIndustry-standard packaging saves on board space
      		OTHERIn StockNew Sealed Under Guarantee
      CY2071ASL-651
      Functional DescriptionThe CY2071A is a general-purpose clock synthesizer designed for use in applications such as modems, disk drives, CD-ROM drives, video CD players, games, set-top boxes, and data/telecommunications. The device offers up to three configurable clock outputs in an 8-pin, 150-mil SOIC package and can operate off either a 3.3V or 5V power supply. The on-chip reference oscillator is designed for 10-MHz to 25-MHz crystals. Alternatively, an external reference clock of frequency between 1 MHz and 30 MHz can be used.FeaturesSingle phase-locked loop architectureEPROM programmabilityFactory-programmable (CY2071A, CY2071AI) or field-programmable (CY2071AF, CY2071AFI) device optionsUp to three configurable outputsLow-skew, low-jitter, high-accuracy outputsInternal loop filterPower management (OE)Frequency select optionsConfigurable 5V or 3.3V operation8-pin 150-mil SOIC packageBenefitsGenerates a custom frequency from an external sourceEasy customization and fast turnaroundProgramming support available for all opportunitiesGenerates three related frequencies from a single deviceMeets critical industry standard timing requirementsAlleviates the need for external componentsSupports low-power applications3 outputs with 2 user selectable frequenciesSupports industry standard design platformsIndustry-standard packaging saves on board space
      		OTHERIn StockNew Sealed Under Guarantee
      0.523018s