All
      0
      Cart

      • OTHER

      • Popular
      • Newest
      • Most reviews

      Memory - Configuration Proms for FPGA's

      Memory - Configuration Proms for FPGA's
      ModelDescriptionBrandLeadingConditionPriceAction
      Memory - Configuration Proms for FPGA's
      EPCS1SI8N
      Functional DescriptionWith SRAM-based devices that support active serial configuration, configuration data must be reloaded each time the device powers up, the system reconfigures, or when new configuration data is required. Serial configuration devices are flash memory devices with a serial interface that can store configuration data for FPGA devices that support active serial configuration and reload the data to the device upon power-up or reconfiguration. Table 3–1 summarizes the features of the Altera configuration devices and the amount of configuration space they hold.FeaturesThe serial configuration devices provide the following features:■ 1-, 4-, 16-, 64-, and 128-Mbit flash memory devices that serially configure Arria® series, Cyclone® series, all device families in the Stratix® series except the Stratix device family, and FPGAs using the active serial (AS) configuration scheme■ Easy-to-use four-pin interface■ Low cost, low-pin count, and non-volatile memory■ Low current during configuration and near-zero standby mode current■ 2.7-V to 3.6-V operation■ EPCS1 and EPCS4 available in 8-pin small outline integrated circuit (SOIC) package. EPCS16 available in 8-pin or 16-pin SOIC packages. EPCS64 and EPCS128 available in 16-pin SOIC package■ Enables the Nios® processor to access unused flash memory through AS memory interface■ Re-programmable memory with more than 100,000 erase/program cycles■ Write protection support for memory sectors using status register bits■ In-system programming support with SRunner software driver■ In-system programming support with USB Blaster™, EthernetBlaster, or ByteBlaster™ II download cables■ Additional programming support with the Altera® Programming Unit (APU) and programming hardware from BP Microsystems, System General, and other vendors■ Delivered with the memory array erased (all the bits set to 1)
      		OTHERIn StockNew Sealed Under Guarantee
      EPC16UI88AA
      The Altera enhanced configuration device is a single-device, high-speed, advanced configuration solution for very high-density FPGAs. The core of an enhanced configuration device is divided into two major blocks, a configuration controller and a flash memory. The flash memory is used to store configuration data for systems made up of one or more Altera FPGAs. Unused portions of the flash memory can be used to storeprocessor code or data that can be accessed via the external flash interface after FPGA configuration is complete.Features■ Enhanced configuration devices include EPC4, EPC8, and EPC16 devices■ Single-chip configuration solution for Stratix® series, Cyclone™ series, APEX™ II, APEX 20K (including APEX 20K, APEX 20KC, and APEX 20KE), Mercury™, ACEX® 1K, and FLEX® 10K (FLEX 10KE and FLEX 10KA) devices■ Contains 4-, 8-, and 16-Mbit flash memories for configuration data storage● On-chip decompression feature almost doubles the effective configuration density■ Standard flash die and a controller die combined into single stacked chip package■ External flash interface supports parallel programming of flash and external processor access to unused portions of memory● Flash memory block/sector protection capability via external flash interface● Supported in EPC16 and EPC4 devices■ Page mode support for remote and local reconfiguration with up to eight configurations for the entire system● Compatible with Stratix series Remote System Configuration feature■ Supports byte-wide configuration mode fast passive parallel (FPP); 8-bit data output per DCLK cycle■ Supports true n-bit concurrent configuration (n = 1, 2, 4, and 8) of Altera FPGAs■ Pin-selectable 2-ms or 100-ms power-on reset (POR) time■ Configuration clock supports programmable input source and frequency synthesis● Multiple configuration clock sources supported (internal oscillator and external clock input pin)● External clock source with frequencies up to 133 MHz● Internal oscillator defaults to 10 MHz; Programmable for higher frequencies of 33, 50, and 66 MHz● Clock synthesis supported via user programmable divide counter■ Available in the 100-pin plastic quad flat pack (PQFP) and the 88-pin Ultra FineLine BGA® packages● Vertical migration between all devices supported in the 100-pin PQFP package■ Supply voltage of 3.3 V (core and I/O)
      		OTHERIn StockNew Sealed Under Guarantee
      AFB0924HH-A
      		OTHERIn StockNew Sealed Under Guarantee
      AFB0924VH-D002
      		OTHERIn StockNew Sealed Under Guarantee
      0.434716s