All
      0
      Cart
      ADI +

      • OTHER

      • Popular
      • Newest
      • Most reviews

      ADI

      Instrumentation Amplifier Voltage Reference Supervisors RF Amplifiers Temperature Sensors - Analog and Digital Output Analog Multipliers, Dividers Digital Potentiometers Digital to Analog Converters (DAC) Analog to Digital Converters (ADC) Signal Switchess, Multiplexers, Decoders Voltage Translators, Level Shifters RF Mixers Linear Voltage Regulators RF Switches Microphones
      ModelDescriptionBrandLeadingConditionPriceAction
      Instrumentation Amplifier
      AD549JH
      PRODUCT DESCRIPTIONThe AD549 is a monolithic electrometer operational amplifier with very low input bias current. Input offset voltage and input offset voltage drift are laser trimmed for precision performance. The AD549’s ultralow input current is achieved with “Topgate” JFET technology, a process development exclusive to Analog Devices. This technology allows the fabrication of extremely low input current JFETs compatible with a standard junction isolated bipolar process. The 1015 Ω common-mode impedance, a result of the bootstrapped input stage, insures that the input current is essentially independent of common-mode voltage.FEATURESUltralow Bias Current: 60 fA max (AD549L) 250 fA max (AD549J)Input Bias Current Guaranteed Over Common-Mode Voltage RangeLow Offset Voltage: 0.25 mV max (AD549K) 1.00 mV max (AD549J)Low Offset Drift: 5 μV/8C max (AD549K) 20 μV/8C max (AD549J)Low Power: 700 μA max Supply CurrentLow Input Voltage Noise: 4 μV p-p 0.1 Hz to 10 HzMIL-STD-883B Parts AvailableAPPLICATIONSElectrometer AmplifiersPhotodiode PreamppH Electrode BufferVacuum lon Gage Measurement
      		OTHERIn StockNew Sealed Under Guarantee
      Voltage Reference
      AD589SH
      PRODUCT DESCRIPTIONThe AD589 is a two-terminal, low cost, temperature compensated bandgap voltage reference which provides a fixed 1.23 V output voltage for input currents between 50 µA and 5.0 mA.The high stability of the AD589 is primarily dependent upon the matching and thermal tracking of the on-chip components. Analog Devices’ precision bipolar processing and thin-film technology combine to provide excellent performance at low cost.FEATURESSuperior Replacement for Other 1.2 V ReferencesWide Operating Range: 50 μA to 5 mALow Power: 60 μW Total PD at 50 μALow Temperature Coefficient:10 ppm/°C max, 0°C to +70°C (AD589M)25 ppm/°C max, –55°C to +125°C (AD589U)Two-Terminal “Zener” OperationLow Output Impedance: 0.6 ΩNo Frequency Compensation RequiredLow CostMIL-STD-883 Compliant Versions Available
      		OTHERIn StockNew Sealed Under Guarantee
      ADR1581BRTZ-REEL7
      GENERAL DESCRIPTIONThe ADR01, ADR02, ADR03, and ADR06 are precision 10.0 V, 5.0 V, 2.5 V, and 3.0 V band gap voltage references featuring high accuracy, high stability, and low power consumption. The parts are housed in tiny, 5-lead SC70 and TSOT packages, as well as in 8-lead SOIC versions. The SOIC versions of the ADR01, ADR02, and ADR03 are drop-in replacements1 to the industry standard REF01, REF02, and REF03. The small footprint and wide operating range make the ADR0x references ideally suited for general-purpose and space-constrained applications.FEATURESUltracompact SC70 and TSOT packagesLow temperature coefficient8-lead SOIC: 3 ppm/°C5-lead SC70: 9 ppm/°C5-lead TSOT: 9 ppm/°CInitial accuracy ±0.1%No external capacitor requiredLow noise 10 µV p-p (0.1 Hz to 10.0 Hz)Wide operating rangeADR01: 12.0 V to 36.0 VADR02: 7.0 V to 36.0 VADR03: 4.5 V to 36.0 VADR06: 5.0 V to 36.0 VHigh output current 10 mAWide temperature range: −40°C to +125°CADR01/ADR02/ADR03 pin compatible to industry standard REF01/REF02/REF03ADR01, ADR02, ADR03 and ADR06 SOIC qualified for automotive applicationsAPPLICATIONSPrecision data acquisition systemsHigh resolution convertersIndustrial process control systemsPrecision instrumentsAuto battery monitoringPCMCIA cards
      		OTHERIn StockNew Sealed Under Guarantee
      ADR512ARTZ-REEL7
      GENERAL DESCRIPTIONDesigned for space-critical applications, the ADR520/ADR525/ADR530/ADR540/ADR550 are high precision shunt voltage references, housed in ultrasmall SC70 and SOT-23-3 packages. These references feature low temperature drift of 40 ppm/°C, an initial accuracy of better than ±0.2%, and ultralow output noise of 14 μV p-p.FEATURESUltracompact SC70 and SOT-23-3 packagesTemperature coefficient: 40 ppm/°C (maximum)2× the temperature coefficient improvement over theLM4040Pin compatible with the LM4040/LM4050Initial accuracy: ±0.2%Low output voltage noise: 14 μV p-p @ 2.5 V outputNo external capacitor requiredOperating current range: 50 μA to 15 mAIndustrial temperature range: −40°C to +85°CAPPLICATIONSPortable, battery-powered equipmentAutomotivePower suppliesData acquisition systemsInstrumentation and process controlEnergy measurement
      		OTHERIn StockNew Sealed Under Guarantee
      ADR370ART-R2
      GENERAL DESCRIPTIONThe ADR360/ADR361/ADR363/ADR364/ADR365/ADR366 are precision 2.048 V, 2.5 V, 3.0 V, 4.096 V, 5.0 V, and 3.3 V band gap voltage references that offer low power and high precision in tiny footprints. Using patented temperature drift curvature correction techniques from Analog Devices, Inc., the ADR36x references achieve a low temperature drift of 9 ppm/°C in a TSOT package.The ADR36x family of micropower, low dropout voltage references provides a stable output voltage from a minimum supply of 300 mV above the output. Their advanced design eliminates the need for external capacitors, which further reduces board space and system cost. The combination of low power operation, small size, and ease of use makes the ADR36x precision voltage references ideally suited for battery-operated applications.FEATURESCompact TSOT packagesLow temperature coefficientB grade: 9 ppm/°CA grade: 25 ppm/°CInitial accuracyB grade: ±3 mV maximumA grade: ±6 mV maximumUltralow output noise: 6.8 μV p-p (0.1 Hz to 10 Hz)Low dropout: 300 mVLow supply current: 190 μA maximumNo external capacitor requiredOutput current: +5 mA/−1 mAWide temperature range: −40°C to +125°CQualified for automotive applicationsAPPLICATIONSBattery-powered instrumentsPortable medical instrumentsData acquisition systemsIndustrial process controlsAutomotive
      		OTHERIn StockNew Sealed Under Guarantee
      ADR3440ARJZ-R2
      The ADR3412/ADR3420/ADR3425/ADR3430/ADR3433/ADR3440/ADR3450 are low-cost, low-power, high precision voltage references, featuring ± 0.1% initial accuracy, low operating current and low output noise in a small SOT23 package. For high accuracy, output voltage and temperature coefficient are trimmed digitally during final assembly using Analog Devices’ proprietary Digi-Trim® technology.Stability and reliability are further improved by the devices’ low output voltage hysteresis and low long-term output voltage drift.Furthermore, the low operating current of the device (100 μA max) facilitates usage in low-power devices, while its low output noise helps maintain signal integrity in critical signal processing systems.These CMOS are available in a wide range of output voltages, allof which are specified over the industrial temperature range of −40°C to +125 °C.
      		OTHERIn StockNew Sealed Under Guarantee
      ADR391AUJZ-REEL7
      GENERAL DESCRIPTIONThe ADR391/ADR392/ADR395 are precision 2.048 V, 2.5 V, 4.096 V, and 5 V band gap voltage references, respectively, featuring low power and high precision in a tiny footprint. Using patented temperature drift curvature correction techniques from Analog Devices, Inc., the ADR39x references achieve a low 9 ppm/°C of temperature drift in the TSOT package.FEATURESCompact 5-lead TSOT packageLow temperature coefficientB grade: 9 ppm/°CA grade: 25 ppm/°CInitial accuracyB grade: ±4 mV maximum (ADR391)A grade: ±6 mV maximumUltralow output noise: 5 μV p-p (0.1 Hz to 10 Hz)Low dropout: 300 mVLow supply current3 μA maximum in shutdown140 μA maximum in operationNo external capacitor requiredOutput current: 5 mAAutomotive grade availableWide temperature range: −40°C to +125°CAPPLICATIONSBattery-powered instrumentationPortable medical instrumentationData acquisition systemsIndustrial process controlsAutomotive
      		OTHERIn StockNew Sealed Under Guarantee
      ADR5041AKSZ-REEL7
      GENERAL DESCRIPTIONDesigned for space-critical applications, the ADR520/ADR525/ADR530/ADR540/ADR550 are high precision shunt voltage references, housed in ultrasmall SC70 and SOT-23-3 packages. These references feature low temperature drift of 40 ppm/°C, an initial accuracy of better than ±0.2%, and ultralow output noise of 14 μV p-p.FEATURESUltracompact SC70 and SOT-23-3 packagesTemperature coefficient: 40 ppm/°C (maximum)2× the temperature coefficient improvement over theLM4040Pin compatible with the LM4040/LM4050Initial accuracy: ±0.2%Low output voltage noise: 14 μV p-p @ 2.5 V outputNo external capacitor requiredOperating current range: 50 μA to 15 mAIndustrial temperature range: −40°C to +85°CAPPLICATIONSPortable, battery-powered equipmentAutomotivePower suppliesData acquisition systemsInstrumentation and process controlEnergy measurement
      		OTHERIn StockNew Sealed Under Guarantee
      ADR5044AKSZ-REEL7
      GENERAL DESCRIPTIONDesigned for space-critical applications, the ADR520/ADR525/ADR530/ADR540/ADR550 are high precision shunt voltage references, housed in ultrasmall SC70 and SOT-23-3 packages. These references feature low temperature drift of 40 ppm/°C, an initial accuracy of better than ±0.2%, and ultralow output noise of 14 μV p-p.FEATURESUltracompact SC70 and SOT-23-3 packagesTemperature coefficient: 40 ppm/°C (maximum)2× the temperature coefficient improvement over theLM4040Pin compatible with the LM4040/LM4050Initial accuracy: ±0.2%Low output voltage noise: 14 μV p-p @ 2.5 V outputNo external capacitor requiredOperating current range: 50 μA to 15 mAIndustrial temperature range: −40°C to +85°CAPPLICATIONSPortable, battery-powered equipmentAutomotivePower suppliesData acquisition systemsInstrumentation and process controlEnergy measurement
      		OTHERIn StockNew Sealed Under Guarantee
      Supervisors
      ADM6315-26D2ARTZR7
      		OTHERIn StockNew Sealed Under Guarantee
      ADM811LARTZ-REEL
      GENERAL DESCRIPTIONThe ADM811/ADM812 are reliable voltage monitoring devices suitable for use in most voltage monitoring applications. The ADM811/ADM812 are designed to monitor six different voltages, each allowing a 5% or 10% degradation of standard PSU voltages before a reset occurs. These voltages have been selected for the effective monitoring of 2.5 V, 3 V, 3.3 V, and 5 V supply voltage levels.FEATURESSuperior upgrade for MAX811/MAX812Specified over temperatureLow power consumption: 5 µA typicalPrecision voltage monitor: 2.5 V, 3 V, 3.3 V, 5 V optionsReset assertion down to 1 VCCPower-on reset: 140 ms minimumLogic low RESET output (ADM811)Logic high RESET output (ADM812)Built-in manual resetAPPLICATIONSMicroprocessor systemsControllersIntelligent instrumentsAutomotive systemsSafety systemsPortable instruments
      		OTHERIn StockNew Sealed Under Guarantee
      ADM6328-26ARTZ-R7
      		OTHERIn StockNew Sealed Under Guarantee
      ADM809ZARTZ-REEL7
      GENERAL DESCRIPTIONThe ADM803/ADM809/ADM810 supervisory circuits monitor the power supply voltage in microprocessor systems. They provide a reset output during power-up, power-down, and brownout conditions. On power-up, an internal timer holds reset asserted for 240 ms. This holds the microprocessor in a reset state until conditions have stabilized. The reset output remains operational with VCC as low as 1 V. The ADM803 and ADM809 provide an active low reset signal (RESET), whereas the ADM810 provides an active high signal (RESET) output. The ADM809 and ADM810 have push-pull outputs, whereas the ADM803 has an open-drain output, which requires an external pull-up resistor.FEATURESSpecified over temperatureLow power consumption: 17 μAPrecision voltage monitor: 2.5 V, 3 V, 3.3 V, 5 V optionsReset assertion down to 1 V VCC140 ms minimum power-on resetOpen-drain RESET output (ADM803)Push-pull RESET output (ADM809)Push-pull RESET output (ADM810)SC70 and SOT-23 packagesAPPLICATIONSMicroprocessor systemsComputersControllersIntelligent instruments
      		OTHERIn StockNew Sealed Under Guarantee
      ADM1815-R22ART-RL7
      GENERAL DESCRIPTIONThe ADM181x range of voltage monitoring circuits can be used in any application where an electronic system needs to be reset when a voltage increases above or below a predetermined value.Because of the reset delay time incorporated into the ADM181x series, these devices can provide a safe startup for electronic systems. Before a system initializes, the power supply must stabilize. Using the ADM181x series ensures that there are typically 150 ms for the power supply to stabilize before the system is reset and safe system initialization begins.The ADM181x series of microprocessor reset circuits are available in low cost, space-saving SOT-23 packages.FEATURESReliable Low Cost Voltage Monitor with Reset OutputSuitable for Monitoring 2.5 V, 3 V, 3.3 V, and 5 V PowerSupply VoltagesReset Threshold Levels: 4.62 V, 4.35 V, 3.06 V, 2.88 V,2.55 V, 2.31 V, and 2.18 V (Typ)Active High and Low Push-Pull Output Choices(ADM1810, ADM1812, ADM1815, and ADM1817)Open-Drain Output Choices (ADM1811, ADM1813,ADM1816, and ADM1818)Can Be Used with a Manual Push-Button to Generatea Reset (ADM1813, ADM1818)Initialize Microprocessor Systems with Added SafetyAvailable in a 3-Lead SOT-23 PackageAPPLICATIONSMicroprocessor SystemsComputersControllersIntelligent InstrumentsAutomotive Systems
      		OTHERIn StockNew Sealed Under Guarantee
      ADM809JART-REEL7
      GENERAL DESCRIPTIONThe ADM803/ADM809/ADM810 supervisory circuits monitor the power supply voltage in microprocessor systems. They provide a reset output during power-up, power-down, and brownout conditions. On power-up, an internal timer holds reset asserted for 240 ms. This holds the microprocessor in a reset state until conditions have stabilized. The reset output remains operational with VCC as low as 1 V. The ADM803 and ADM809 provide an active low reset signal (RESET), whereas the ADM810 provides an active high signal (RESET) output. The ADM809 and ADM810 have push-pull outputs, whereas the ADM803 has an open-drain output, which requires an external pull-up resistor.FEATURESSpecified over temperatureLow power consumption: 17 μAPrecision voltage monitor: 2.5 V, 3 V, 3.3 V, 5 V optionsReset assertion down to 1 V VCC140 ms minimum power-on resetOpen-drain RESET output (ADM803)Push-pull RESET output (ADM809)Push-pull RESET output (ADM810)SC70 and SOT-23 packagesAPPLICATIONSMicroprocessor systemsComputersControllersIntelligent instrumentsAutomotive systems
      		OTHERIn StockNew Sealed Under Guarantee
      ADM810TARTZ-REEL
      GENERAL DESCRIPTIONThe ADM803/ADM809/ADM810 supervisory circuits monitor the power supply voltage in microprocessor systems. They provide a reset output during power-up, power-down, and brownout conditions. On power-up, an internal timer holds reset asserted for 240 ms. This holds the microprocessor in a reset state until conditions have stabilized. The reset output remains operational with VCC as low as 1 V. The ADM803 and ADM809 provide an active low reset signal (RESET), whereas the ADM810 provides an active high signal (RESET) output. The ADM809 and ADM810 have push-pull outputs, whereas the ADM803 has an open-drain output, which requires an external pull-up resistor.FEATURESSpecified over temperatureLow power consumption: 17 μAPrecision voltage monitor: 2.5 V, 3 V, 3.3 V, 5 V optionsReset assertion down to 1 V VCC140 ms minimum power-on resetOpen-drain RESET output (ADM803)Push-pull RESET output (ADM809)Push-pull RESET output (ADM810)SC70 and SOT-23 packagesAPPLICATIONSMicroprocessor systemsComputersControllersIntelligent instrumentsAutomotive systems
      		OTHERIn StockNew Sealed Under Guarantee
      ADM8616RCYAKSZ-RL7
      GENERAL DESCRIPTIONThe ADM8611/ADM8616/ADM8617/ADM8618 are supervisory circuits which monitor power supply voltage levels and code execution integrity in microprocessor-based systems. A power-on-reset signal is generated when the supply voltage rises to a preset threshold level. The ADM8611’s debounced manual reset input can be used to initiate a reset by means of an external push-button or logic signal. The ADM8616–ADM8618 have an on-chip watchdog timer which can reset the microprocessor if it fails to strobe within a preset timeout period.FEATURESPrecision 1.8V to 5V Power Supply Monitoring9 Reset Threshold Options:1.58V to 4.63V140ms (Min) Reset TimeoutManual Reset Input (ADM8611)Watchdog Timer (ADM8616–ADM8618)Reset Output StagesPush-Pull Active-LowOpen-Drain Active-LowPush-Pull Active-HighLow Power Consumption (3µA)Guaranteed Reset Output valid to VCC=1VPower Supply Glitch ImmunitySpecified Over -40°C to +85°C Temperature Range4-Lead SC70 PackageAPPLICATIONSMicroprocessor SystemsComputersControllersIntelligent InstrumentsPortable Equipment
      		OTHERIn StockNew Sealed Under Guarantee
      ADM6384YKS29D1-RL7
      		OTHERIn StockNew Sealed Under Guarantee
      ADM6823WYRJZ-RL7
      GENERAL DESCRIPTIONThe ADM6821-ADM6825 are supervisory circuits which monitor power supply voltage levels and code execution integrity in microprocessor-based systems. As well as providing power-on-reset signals, an on-chip watchdog timer can reset the microprocessor if it fails to strobe within a preset timeout period. A reset signal can also be asserted by means of an external push-button, through a manual reset input. The three parts feature different combinations of watchdog input, manual reset input and output stage configuration, as shown in table 1.FEATURESPrecision Low Voltage Monitoring down to 1.8V9 Reset Threshold Options:1.58V to 4.63V140ms (Min) Reset TimeoutWatchdog Timer with 1.6s TimeoutManual Reset InputReset Output StagesPush-Pull Active-LowOpen-Drain Active-LowPush-Pull Active-HighLow Power Consumption (3µA)Guaranteed Reset Output valid to VCC=1VPower Supply Glitch ImmunitySpecified from -40°C to +125°C5-Lead SOT-23 PackageAPPLICATIONSMicroprocessor SystemsComputersControllersIntelligent InstrumentsPortable Equipment
      		OTHERIn StockNew Sealed Under Guarantee
      ADM809TAKS-REEL7
      GENERAL DESCRIPTIONThe ADM803/ADM809/ADM810 supervisory circuits monitor the power supply voltage in microprocessor systems. They provide a reset output during power-up, power-down, and brownout conditions. On power-up, an internal timer holds reset asserted for 240 ms. This holds the microprocessor in a reset state until conditions have stabilized. The reset output remains operational with VCC as low as 1 V. The ADM803 and ADM809 provide an active low reset signal (RESET), whereas the ADM810 provides an active high signal (RESET) output. The ADM809 and ADM810 have push-pull outputs, whereas the ADM803 has an open-drain output, which requires an external pull-up resistor.FEATURESSpecified over temperatureLow power consumption: 17 μAPrecision voltage monitor: 2.5 V, 3 V, 3.3 V, 5 V optionsReset assertion down to 1 V VCC140 ms minimum power-on resetOpen-drain RESET output (ADM803)Push-pull RESET output (ADM809)Push-pull RESET output (ADM810)SC70 and SOT-23 packagesAPPLICATIONSMicroprocessor systemsComputersControllersIntelligent instruments
      		OTHERIn StockNew Sealed Under Guarantee
      RF Amplifiers
      ADL5544ARKZ-R7
      GENERAL DESCRIPTIONThe ADL5544 is a single-ended RF/IF gain block amplifier that provides broadband operation from 30 MHz to 6 GHz. The ADL5544 provides over 34 dBm of OIP3 using only 55 mA from a 5 V supply.The ADL5544 provides a gain of 17 dB, which is stable over frequency, temperature, power supply, and from device to device. The amplifier is offered in the industry-standard SOT-89 package and is internally matched to 50 Ω at the input and output, making the ADL5544 very easy to implement in a wide variety of applications. The only external components required are the input/output accoupling capacitors, power supply decoupling capacitors, and dc bias inductor.The ADL5544 is fabricated on an InGaP HBT process and has a high ESD rating of ±1.5 kV (Class 1C). The ADL5544 is also fully specified for operation across the wide temperature range of −40°C to +105°C. A fully populated RoHS-compliant evaluation board is available.FEATURESFixed gain of 17.4 dBBroadband operation from 30 MHz to 6 GHzInput/output internally matched to 50 ΩIntegrated bias control circuitOIP3 of 34.9 dBm at 900 MHzP1dB of 17.6 dBm at 900 MHzNoise figure of 2.9 dB at 900 MHzSingle 5 V power supplyLow quiescent current of 55 mAWide operating temperature range of −40°C to +105°CThermally efficient SOT-89 packageESD rating of ±1.5 kV (Class 1C)
      		OTHERIn StockNew Sealed Under Guarantee
      HMC481MP86ETR
      		OTHERIn StockNew Sealed Under Guarantee
      Temperature Sensors - Analog and Digital Output
      TMP03FT9Z
      GENERAL DESCRIPTIONThe TMP03/TMP04 is a monolithic temperature detector that generates a modulated serial digital output that varies in direct proportion to the temperature of the device. An onboard sensor generates a voltage precisely proportional to absolute temperature which is compared to an internal voltage reference and input to a precision digital modulator.FEATURESLow Cost 3-Pin PackageModulated Serial Digital OutputProportional to Temperature±1.5°C Accuracy (typ) from –25°C to +100°CSpecified –40°C to +100°C, Operation to 150°CPower Consumption 6.5 mW Max at 5 VFlexible Open-Collector Output on TMP03CMOS/TTL Compatible Output on TMP04Low Voltage Operation (4.5 V to 7 V)APPLICATIONSIsolated SensorsEnvironmental Control SystemsComputer Thermal MonitoringThermal ProtectionIndustrial Process ControlPower System Monitors
      		OTHERIn StockNew Sealed Under Guarantee
      AD592BNZ
      PRODUCT DESCRIPTIONThe AD592 is a two terminal monolithic integrated circuit temperature transducer that provides an output current proportional to absolute temperature. For a wide range of supply voltages the transducer acts as a high impedance temperature dependent current source of 1 µA/K. Improved design and laser wafer trimming of the IC’s thin film resistors allows the AD592 to achieve absolute accuracy levels and nonlinearity errors previously unattainable at a comparable price.FEATURESHigh Precalibrated Accuracy: 0.5°C max @ +25°CExcellent Linearity: 0.15°C max (0°C to +70°C)Wide Operating Temperature Range: –25°C to +105°CSingle Supply Operation: +4 V to +30 VExcellent Repeatability and StabilityHigh Level Output: 1 μA/KTwo Terminal Monolithic IC: Temperature In/Current OutMinimal Self-Heating Errors
      		OTHERIn StockNew Sealed Under Guarantee
      Analog Multipliers, Dividers
      AD532JHZ
      GENERAL DESCRIPTIONThe AD532 is the first pretrimmed single chip monolithic multiplier/divider. It guarantees a maximum multiplying error of ±1.0% and a ±10 V output voltage without the need for any external trimming resistors or output op amp. Because the AD532 is internally trimmed, its simplicity of use provides design engineers with an attractive alternative to modular multipliers, and its monolithic construction provides significant advantages in size, reliability and economy. Further, the AD532 can be used as a direct replacement for other IC multipliers that require external trim networks.FEATURESPretrimmed to ±1.0% (AD532K)No external components requiredGuaranteed ±1.0% maximum 4-quadrant error (AD532K)Differential Inputs for (X1 − X2) (Y1 − Y2)/10 V transfer functionMonolithic construction, low costAPPLICATIONSMultiplication, division, squaring, square rootingAlgebraic computationPower measurementsInstrumentation applicationsAvailable in chip form
      		OTHERIn StockNew Sealed Under Guarantee
      Digital Potentiometers
      AD5227BUJZ50-R2
      GENERAL DESCRIPTIONThe AD5227 is Analog Devices’ latest 64-step up/down control digital potentiometer1. This device performs the same electronic adjustment function as a 5 V potentiometer or variable resistor. Its simple 3-wire up/down interface allows manual switching or high speed digital control.FEATURES64-position digital potentiometer10 kΩ, 50 kΩ, 100 kΩ end-to-end terminal resistanceSimple up/down digital or manual configurable controlMidscale presetLow potentiometer mode tempco = 10 ppm/°CLow rheostat mode tempco = 35 ppm/°CUltralow power, IDD = 0.4 μA typ and 3 μA maxFast adjustment time, ts = 1 μsChip select enable multiple device operationLow operating voltage, 2.7 V to 5.5 VAutomotive temperature range, −40°C to +105°CCompact thin SOT-23-8 (2.9 mm × 3 mm) Pb-free packageAPPLICATIONSMechanical potentiometer and trimmer replacementsLCD backlight, contrast, and brightness controlsPortable electronics level adjustmentProgrammable power supplyDigital trimmer replacementsAutomatic closed-loop control
      		OTHERIn StockNew Sealed Under Guarantee
      AD5171BRJZ10-R7
      GENERAL DESCRIPTIONThe AD5171 is a 64-position, one-time programmable (OTP) digital potentiometer 2 that uses fuse link technology to achieve the memory retention of the resistance setting function. OTP is a cost-effective alternative over the EEMEM approach for users who do not need to reprogram new memory settings in the digital potentiometer. This device performs the same electronic adjustment function as most mechanical trimmers and variable resistors.FEATURES64 positionOne-time programmable (OTP) set-and-forget resistance setting—low cost alternative over EEMEMUnlimited adjustments prior to OTP activation5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ end-to-end resistanceLow temperature coefficient: 5 ppm/°C in potentiometer modeLow temperature coefficient: 35 ppm/°C in rheostat modeCompact standard 8-lead SOT-23 packageLow power: IDD = 10 μA maximumFast settling time: tS = 5 μs typical in power-upI2C-compatible digital interfaceComputer software replaces microcontroller in factory programming applicationsFull read/write of wiper registerExtra I2C device address pinLow operating voltage: 2.7 V to 5.5 VOTP validation check functionAutomotive temperature range: −40°C to +125°CAPPLICATIONSSystem calibrationsElectronics level settingsMechanical trimmers and potentiometer replacementsAutomotive electronics adjustmentsGain control and offset adjustmentsTransducer circuit adjustmentsProgrammable filters up to 1.5 MHz BW 1
      		OTHERIn StockNew Sealed Under Guarantee
      AD5273BRJZ1-REEL7
      GENERAL DESCRIPTIONThe AD5273 is a 64-position, one-time programmable (OTP) digital potentiometer4 that employs fuse link technology to achieve permanent program setting. This device performs the same electronic adjustment function as most mechanical trimmers and variable resistors. It allows unlimited adjustments before permanently setting the resistance values. The AD5273 is programmed using a 2-wire, I2C-compatible digital control. During write mode, a fuse blow command is executed after the final value is determined, thereby freezing the wiper position at a given setting (analogous to placing epoxy on a mechanical trimmer).FEATURES64 positionsOne-time programmable (OTP)1 set-and-forgetResistance setting—low cost alternative over EEMEMUnlimited adjustments prior to OTP activation1 kΩ, 10 kΩ, 50 kΩ, 100 kΩ end-to-end terminal resistanceCompact 8-lead SOT-23 standard packageUltralow power: IDD = 5 µA maximumFast settling time: tS = 5 µs typical during power-upI2C-compatible digital interfaceComputer software2 replaces microcontroller infactory programming applicationsWide temperature range: −40°C to +105°CLow operating voltage: 2.7 V to 5.5 VOTP validation check functionAPPLICATIONSSystem calibrationsElectronics level settingsMechanical potentiometers and trimmer replacementTransducer circuit adjustmentsProgrammable filters up to 6 MHz BW3
      		OTHERIn StockNew Sealed Under Guarantee
      AD5160BRJZ10-R2
      GENERAL DESCRIPTIONThe AD5160 provides a compact 2.9 mm × 3 mm packaged solution for 256-position adjustment applications. These devices perform the same electronic adjustment function as mechanical potentiometers1 or variable resistors but with enhanced resolution, solid-state reliability, and superior low temperature coefficient performance.FEATURES256-positionEnd-to-end resistance: 5 kΩ, 10 kΩ, 50 kΩ, 100 kΩCompact SOT-23-8 (2.9 mm × 3 mm) packageSPI-compatible interfacePower-on preset to midscaleSingle supply: 2.7 V to 5.5 VLow temperature coefficient: 45 ppm/°CLow power, IDD = 8 μAWide operating temperature: –40°C to +125°CEvaluation board availableAPPLICATIONSMechanical potentiometer replacement in new designsTransducer adjustment of pressure, temperature, position, chemical, and optical sensorsRF amplifier biasingAutomotive electronics adjustmentGain control and offset adjustment
      		OTHERIn StockNew Sealed Under Guarantee
      AD5160BRJ100-R2
      GENERAL OVERVIEWThe AD5160 provides a compact 2.9 mm × 3 mm packaged solution for 256-position adjustment applications. These devices perform the same electronic adjustment function as mechanical potentiometers or variable resistors, with enhanced resolution, solid-state reliability, and superior low temperature coefficient performance.FEATURES256-positionEnd-to-end resistance 5 kΩ, 10 kΩ, 50 kΩ, 100 kΩCompact SOT-23-8 (2.9 mm × 3 mm) packageSPI compatible interfacePower-on preset to midscaleSingle supply 2.7 V to 5.5 VLow temperature coefficient 45 ppm/°CLow power, IDD = 8 µAWide operating temperature –40°C to +125°CEvaluation board availableAPPLICATIONSMechanical potentiometer replacement in new designsTransducer adjustment of pressure, temperature, position, chemical, and optical sensorsRF amplifier biasingAutomotive electronics adjustmentGain control and offset adjustment
      		OTHERIn StockNew Sealed Under Guarantee
      Digital to Analog Converters (DAC)
      AD5061BRJZ-1REEL7
      GENERAL DESCRIPTIONThe AD5061, a member of ADI’s nanoDAC family, is a low power, single 16-bit buffered voltage-out DAC that operates from a single 2.7 V to 5.5 V supply. The part offers a relative accuracy specification of ±4 LSB and operation is guaranteed monotonic with a ±1 LSB DNL specification. The part uses a versatile 3-wire serial interface that operates at clock rates up to 30 MHz, and is compatible with standard SPI®, QSPI™, MICROWIRE™, and DSP interface standards. The reference for the AD5061 is supplied from an external VREF pin. A reference buffer is also provided on-chip. The part incorporates a power on reset circuit that ensures the DAC output powers up to mid scale or zero scale and remains there until a valid write takesplace to the device.FEATURESSingle 16-bit DAC, 4 LSB INLPower-on reset to midscale or zero-scaleGuaranteed monotonic by design3 power-down functionsLow power serial interface with Schmitt-triggered inputsSmall 8-lead SOT-23 package, low powerFast settling time of 4 µs typically2.7 V to 5.5 V power supplyLow glitch on power-upSYNC interrupt facilityAPPLICATIONSProcess controlData acquisition systemsPortable battery-powered instrumentsDigital gain and offset adjustmentProgrammable voltage and current sourcesProgrammable attenuators
      		OTHERIn StockNew Sealed Under Guarantee
      AD5301BRTZ-REEL7
      GENERAL DESCRIPTIONThe AD5301/AD5311/AD53211 are single 8-/10-/12-bit, buffered, voltage-output DACs that operate from a single 2.5 V to 5.5 V supply, consuming 120 μA at 3 V. The on-chip output amplifier allows rail-to-rail output swing with a slew rate of 0.7 V/μs. It uses a 2-wire (I2C-compatible) serial interface that operates at clock rates up to 400 kHz. Multiple devices can share the same bus.FEATURESAD5301: buffered voltage output 8-bit DACAD5311: buffered voltage output 10-bit DACAD5321: buffered voltage output 12-bit DAC6-lead SOT-23 and 8-lead MSOP packagesMicropower operation: 120 μA at 3 V2-wire (I2C-compatible) serial interfaceData readback capability2.5 V to 5.5 V power supplyGuaranteed monotonic by design over all codesPower-down to 50 nA at 3 VReference derived from power supplyPower-on reset to 0 VOn-chip rail-to-rail output buffer amplifier3 power-down functionsAPPLICATIONSPortable battery-powered instrumentsDigital gain and offset adjustmentProgrammable voltage and current sourcesProgrammable attenuators
      		OTHERIn StockNew Sealed Under Guarantee
      AFB0424HHB
      		OTHERIn StockNew Sealed Under Guarantee
      AFB0424SHB
      		OTHERIn StockNew Sealed Under Guarantee
      Analog to Digital Converters (ADC)
      AD7457BRTZ-REEL7
      		OTHERIn StockNew Sealed Under Guarantee
      AD7476ARTZ-REEL7
      GENERAL DESCRIPTIONThe AD7476/AD7477/AD74781 are, respectively, 12-bit, 10-bit, and 8-bit, high speed, low power, successive approximation ADCs. The parts operate from a single 2.35 V to 5.25 V power supply and feature throughput rates up to 1 MSPS. Each part contains a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 6 MHz.FEATURESFast throughput rate: 1 MSPSSpecified for VDD of 2.35 V to 5.25 VLow power3.6 mW at 1 MSPS with 3 V supplies15 mW at 1 MSPS with 5 V suppliesWide input bandwidth70 dB SNR at 100 kHz input frequencyFlexible power/serial clock speed managementNo pipeline delaysHigh speed serial interfaceSPI®-/QSPI™-/MICROWIRE™-/DSP-compatibleStandby mode: 1 μA maximum6-lead SOT-23 packageAPPLICATIONSBattery-powered systemsPersonal digital assistantsMedical instrumentsMobile communicationsInstrumentation and control systemsData acquisition systemsHigh speed modemsOptical sensors
      		OTHERIn StockNew Sealed Under Guarantee
      AD7478ARTZ-REEL
      GENERAL DESCRIPTIONThe AD7476/AD7477/AD74781 are, respectively, 12-bit, 10-bit, and 8-bit, high speed, low power, successive approximation ADCs. The parts operate from a single 2.35 V to 5.25 V power supply and feature throughput rates up to 1 MSPS. Each part contains a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 6 MHz.FEATURESFast throughput rate: 1 MSPSSpecified for VDD of 2.35 V to 5.25 VLow power3.6 mW at 1 MSPS with 3 V supplies15 mW at 1 MSPS with 5 V suppliesWide input bandwidth70 dB SNR at 100 kHz input frequencyFlexible power/serial clock speed managementNo pipeline delaysHigh speed serial interfaceSPI®-/QSPI™-/MICROWIRE™-/DSP-compatibleStandby mode: 1 μA maximum6-lead SOT-23 packageAPPLICATIONSBattery-powered systemsPersonal digital assistantsMedical instrumentsMobile communicationsInstrumentation and control systemsData acquisition systemsHigh speed modemsOptical sensors
      		OTHERIn StockNew Sealed Under Guarantee
      AFB0512HHB
      		OTHERIn StockNew Sealed Under Guarantee
      AFB0524HHB
      		OTHERIn StockNew Sealed Under Guarantee
      AFB0524HHB-F00
      		OTHERIn StockNew Sealed Under Guarantee
      Signal Switchess, Multiplexers, Decoders
      ADG3243BRJ-R2
      GENERAL DESCRIPTIONThe ADG333A is a monolithic CMOS device comprising four independently selectable SPDT switches. It is designed on an LC2MOS process, which provides low power dissipation yet achieves a high switching speed and a low on resistance.The on resistance profile is very flat over the full analog input range, ensuring good linearity and low distortion when switching audio signals. High switching speed also makes the part suitable for video signal switching. CMOS construction ensures ultralow power dissipation, making the part ideally suited for portable, battery-powered instruments.PRODUCT HIGHLIGHTS1. Extended signal range.The ADG333A is fabricated on an enhanced LC2MOS process, giving an increased signal range which extends to the supply rails.2. Low power dissipation.3. Low RON.4. Single-supply operation.For applications where the analog signal is unipolar, the ADG333A can be operated from a single rail power supply. The part is fully specified with a single 12 V supply.FEATURES44 V supply maximum ratingsVSS to VDD analog signal rangeLow on resistance (45 Ω max)Low ∆RON (5 Ω max)Low RON match (4 Ω max)Low power dissipationFast switching times tON < 175 ns tOFF < 145 nsLow leakage currents (5 nA max)Low charge injection (10 pC max)Break-before-make switching actionAPPLICATIONSAudio and video switchingBattery-powered systemsTest equipmentCommunication systems
      		OTHERIn StockNew Sealed Under Guarantee
      Voltage Translators, Level Shifters
      ADG3232BRJ-REEL7
      GENERAL DESCRIPTIONThe ADG333A is a monolithic CMOS device comprising four independently selectable SPDT switches. It is designed on an LC2MOS process, which provides low power dissipation yet achieves a high switching speed and a low on resistance.The on resistance profile is very flat over the full analog input range, ensuring good linearity and low distortion when switching audio signals. High switching speed also makes the part suitable for video signal switching. CMOS construction ensures ultralow power dissipation, making the part ideally suited for portable, battery-powered instruments.PRODUCT HIGHLIGHTS1. Extended signal range.The ADG333A is fabricated on an enhanced LC2MOS process, giving an increased signal range which extends to the supply rails.2. Low power dissipation.3. Low RON.4. Single-supply operation.For applications where the analog signal is unipolar, the ADG333A can be operated from a single rail power supply. The part is fully specified with a single 12 V supply.FEATURES44 V supply maximum ratingsVSS to VDD analog signal rangeLow on resistance (45 Ω max)Low ∆RON (5 Ω max)Low RON match (4 Ω max)Low power dissipationFast switching times tON < 175 ns tOFF < 145 nsLow leakage currents (5 nA max)Low charge injection (10 pC max)Break-before-make switching actionAPPLICATIONSAudio and video switchingBattery-powered systemsTest equipmentCommunication systems
      		OTHERIn StockNew Sealed Under Guarantee
      RF Mixers
      HMC333
      		OTHERIn StockNew Sealed Under Guarantee
      Linear Voltage Regulators
      ADP3330ARTZ-2.5-R7
      GENERAL DESCRIPTIONThe ADP3330 is a member of the Analog Devices, Inc., precision low dropout (LDO) anyCAP® voltage regulator family of products. The ADP3330 operates with an input voltage range of 2.9 V to 12 V and delivers a load current up to 200 mA. The ADP3330 stands out from the conventional LDOs with a novel architecture and an enhanced process that enables it to offer performance advantages and higher output current than its competition. Its patented design requires only a minimum output capacitor of 0.47 µF for stability. This device is insensitive to output capacitor equivalent series resistance (ESR), and is stable with any good quality capacitor, including ceramic (MLCC) types for space restricted applications.FEATURESHigh accuracy over line and load±0.7% at +25°C±1.4% over temperatureUltralow dropout voltage: 140 mV (typical) at 200 mARequires only COUT= 0.47 μF for stabilityanyCAP = stable with any type of capacitor, includingmultilayer ceramic capacitors (MLCC)Current and thermal limitingLow noiseLow shutdown current: <2 µA2.9 V to 12 V supply range–40°C to +85°C ambient temperature rangeUltrasmall, thermally enhanced, chip-on-lead™ 6-lead SOT-23packageAPPLICATIONSCell phonesNotebook and palmtop computersBattery-powered systemsPCMCIA regulatorsBar code scannersCamcorders and cameras
      		OTHERIn StockNew Sealed Under Guarantee
      ADP3330ARTZ-5-RL7
      GENERAL DESCRIPTIONThe ADP3330 is a member of the Analog Devices, Inc., precision low dropout (LDO) anyCAP® voltage regulator family of products. The ADP3330 operates with an input voltage range of 2.9 V to 12 V and delivers a load current up to 200 mA. The ADP3330 stands out from the conventional LDOs with a novel architecture and an enhanced process that enables it to offer performance advantages and higher output current than its competition. Its patented design requires only a minimum output capacitor of 0.47 µF for stability. This device is insensitive to output capacitor equivalent series resistance (ESR), and is stable with any good quality capacitor, including ceramic (MLCC) types for space restricted applications.FEATURESHigh accuracy over line and load±0.7% at +25°C±1.4% over temperatureUltralow dropout voltage: 140 mV (typical) at 200 mARequires only COUT= 0.47 μF for stabilityanyCAP = stable with any type of capacitor, includingmultilayer ceramic capacitors (MLCC)Current and thermal limitingLow noiseLow shutdown current: <2 µA2.9 V to 12 V supply range–40°C to +85°C ambient temperature rangeUltrasmall, thermally enhanced, chip-on-lead™ 6-lead SOT-23packageAPPLICATIONSCell phonesNotebook and palmtop computersBattery-powered systemsPCMCIA regulatorsBar code scannersCamcorders and cameras
      		OTHERIn StockNew Sealed Under Guarantee
      ADP1712AUJZ-1.0-R7
      GENERAL DESCRIPTIONThe ADP170/ADP171 are low voltage input, low quiescent current, low-dropout (LDO) linear regulators that operate from 1.6 V to 3.6 V and provide up to 300 mA of output current. The low 66 mV dropout voltage at 300 mA load improves efficiency and allows operation over a wide input voltage range. The low 23 µA of quiescent current at a 0 mA load makes the ADP170/ADP171 ideal for battery-operated portable equipment.FEATURESMaximum output current: 300 mAInput voltage range: 1.6 V to 3.6 VLow quiescent current IGND = 23 µA with 0 mA load IGND = 170 µA with 300 mA loadLow shutdown current: <1 µALow dropout voltage: 66 mV at 300 mA loadOutput voltage accuracy: ±1%Up to 31 fixed-output voltage options available from 0.8 V to 3.0 VAdjustable-output voltage range 0.8 V to 3.0 V (ADP171)Accuracy over line, load, and temperature: ±3%Stable with small 1 µF ceramic output capacitorPSRR performance of 70 dB at 10 kHz and 73 dB at 1 kHzLow noise: 30 µV rms at VOUT = 0.8 VCurrent limit and thermal overload protectionLogic-controlled enableCompact 5-lead TSOT packageAPPLICATIONSMobile phonesDigital camera and audio devicesPortable and battery-powered equipmentDSP/FPGA/microprocessor suppliesPost dc-dc regulation
      		OTHERIn StockNew Sealed Under Guarantee
      ADP1710AUJZ-3.3-R7
      GENERAL DESCRIPTIONThe ADP170/ADP171 are low voltage input, low quiescent current, low-dropout (LDO) linear regulators that operate from 1.6 V to 3.6 V and provide up to 300 mA of output current. The low 66 mV dropout voltage at 300 mA load improves efficiency and allows operation over a wide input voltage range. The low 23 µA of quiescent current at a 0 mA load makes the ADP170/ADP171 ideal for battery-operated portable equipment.FEATURESMaximum output current: 300 mAInput voltage range: 1.6 V to 3.6 VLow quiescent current IGND = 23 µA with 0 mA load IGND = 170 µA with 300 mA loadLow shutdown current: <1 µALow dropout voltage: 66 mV at 300 mA loadOutput voltage accuracy: ±1%Up to 31 fixed-output voltage options available from 0.8 V to 3.0 VAdjustable-output voltage range 0.8 V to 3.0 V (ADP171)Accuracy over line, load, and temperature: ±3%Stable with small 1 µF ceramic output capacitorPSRR performance of 70 dB at 10 kHz and 73 dB at 1 kHzLow noise: 30 µV rms at VOUT = 0.8 VCurrent limit and thermal overload protectionLogic-controlled enableCompact 5-lead TSOT packageAPPLICATIONSMobile phonesDigital camera and audio devicesPortable and battery-powered equipmentDSP/FPGA/microprocessor suppliesPost dc-dc regulation
      		OTHERIn StockNew Sealed Under Guarantee
      ADP122AUJZ-2.7-R7
      GENERAL DESCRIPTIONThe ADP122/ADP123 are low quiescent current, low dropout linear regulators. They are designed to operate from an input voltage between 2.3 V and 5.5 V and to provide up to 300 mA of output current. The low 85 mV dropout voltage at a 300 mA load improves efficiency and allows operation over a wide input voltage range.FEATURESInput voltage supply range: 2.3 V to 5.5 V300 mA maximum output currentFixed and adjustable output voltage versionsVery low dropout voltage: 85 mV at 300 mA loadLow quiescent current: 45 μA at no loadLow shutdown current: <1 μAInitial accuracy: ±1% accuracyUp to 31 fixed-output voltage options available from 1.75 V to 3.3 VAdjustable-output voltage range 0.8 V to 5.0 V (ADP123)Excellent PSRR performance: 60 dB at 100 kHzExcellent load/line transient responseOptimized for small 1.0 μF ceramic capacitorsCurrent limit and thermal overload protectionLogic controlled enableCompact, 5-lead TSOT packageAPPLICATIONSDigital camera and audio devicesPortable and battery-powered equipmentAutomatic meter reading (AMR) metersGPS and location management unitsMedical instrumentationPoint-of-sale equipment
      		OTHERIn StockNew Sealed Under Guarantee
      ADP162AUJZ-2.5-R7
      GENERAL DESCRIPTIONThe ADP160/ADP161/ADP162/ADP163 are ultralow quiescent current, low dropout, linear regulators that operate from 2.2 V to 5.5 V and provide up to 150 mA of output current. The low195 mV dropout vol tage at 150 mA load improves efficiency and allows operation over a wide input voltage range.The ADP16x are specifically designed for stable operation with a tiny 1 µF ± 30% ceramic input and output capacitors to meet the requirements of high performance, space-constrainedapplications.The ADP160 is available in 15 fixed output voltage options, ranging from 1.2 V to 4.2 V . The ADP160/ADP161 also include a switched resistor to discharge the output automatically when the LDO is disabled. The ADP162 is identical to the ADP160 but does not include the output discharge function.FEATURESUltralow quiescent currentIQ = 560 nA with 0 µA loadIQ = 860 nA with 1 µA loadStable with 1 µF ceramic input and output capacitorsMaximum output current: 150 mAInput voltage range: 2.2 V to 5.5 VLow shutdown current: <50 nA typicalLow dropout voltage: 195 mV at 150 mA loadInitial accuracy: ±1%Accuracy over line, load, and temperature: ±3.5%15 fixed output voltage options: 1.2 V to 4.2 VAdjustable output availablePSRR performance of 72 dB at 100 HzCurrent limit and thermal overload protectionLogic-control enableIntegrated output discharge resistor5-lead TSOT package4-ball, 0.5 mm pitch WLCSPAPPLICATIONSMobile phonesDigital cameras and audio devicesPortable and battery-powered equipmentPost dc-to-dc regulationPortable medical devices
      		OTHERIn StockNew Sealed Under Guarantee
      ADP130AUJZ-1.2-R7
      GENERAL DESCRIPTIONThe ADP130 is a low quiescent current, low dropout linear regulator. It is designed to operate in dual-supply mode with an input voltage as low as 1.2 V to increase efficiency and provide up to350 mA of output current. The low 17 mV dropout voltage at a 100 mA load improves efficiency and allows operation over a wider input voltage range.FEATURES350 mA maximum output currentInput voltage supply rangeVBIAS = 2.3 V to 5.5 VVIN = 1.2 V to 3.6 V2.3 V < VIN < 3.6 V, VIN can be tied to VBIASVery low dropout voltage: 17 mV @ 100 mA loadLow quiescent current: 25 μA @ no loadLow shutdown current: <1 μA±1% accuracy @ 25°CExcellent PSRR performance: 70 dB @ 10 kHzExcellent load/line transient responseOptimized for small 1 μF ceramic capacitorsCurrent limit and thermal overload protectionLogic controlled enable5-lead TSOT packageAPPLICATIONSMobile phonesDigital camera and audio devicesPortable and battery-powered equipmentPost dc-to-dc regulation
      		OTHERIn StockNew Sealed Under Guarantee
      ADP150AUJZ-2.8-R7
      GENERAL DESCRIPTIONThe ADP150 is an ultralow noise (9 µV), low dropout, linear regulator that operates from 2.2 V to 5.5 V and provides up to 150 mA of output current. The low 105 mV dropout voltage at 150 mA load improves efficiency and allows operation over a wide input voltage range.Using an innovative circuit topology, the ADP150 achieves ultralow noise performance without the necessity of an additional noise bypass capacitor, making it ideal for noise sensitive analog and RF applications. The ADP150 also achieves ultralow noise performance without compromising PSRR or line and load transient performance. The ADP150 offers the best combination of ultralow noise and quiescent current consumption to maximize battery life in portable applications.FEATURESUltra low noise: 9 µV rms, independent of VOUTNo additional noise bypass capacitor requiredStable with 1 µF ceramic input and output capacitorsMaximum output current: 150 mAInput voltage range: 2.2 V to 5.5 VLow quiescent currentIGND = 10 µA with zero loadLow shutdown current: <1 µALow dropout voltage: 105 mV @ 150 mA loadInitial output voltage accuracy: ±1%Up to 14 fixed output voltage options: 1.8 V to 3.3 VPSRR performance of 70 dB at 10 kHzCurrent limit and thermal overload protectionLogic-controlled enable5-lead TSOT package4-ball, 0.8 mm × 0.8 mm, 0.4 mm pitch WLCSPAPPLICATIONSMobile phonesDigital camera and audio devicesPortable and battery-powered equipmentPost dc-to-dc regulationPortable medical devicesRF, PLL, VCO, and clock power supplies
      		OTHERIn StockNew Sealed Under Guarantee
      ADM7160AUJZ-3.3-R2
      GENERAL DESCRIPTIONThe ADM7160 is an ultralow noise, low dropout linear regulator that operates from 2.2 V to 5.5 V and provides up to 200 mA of output current. The low 150 mV dropout voltage at 200 mA load improves efficiency and allows operation over a wide input voltage range.FEATURESPSRR performance of 54 dB at 100 kHzUltralow noise independent of VOUT3 µV rms, 0.1 Hz to 10 Hz9.5 µV rms, 0.1 Hz to 100 kHz9 µV rms, 10 Hz to 100 kHz17 µV rms, 10 Hz to 1 MHzLow dropout voltage: 150 mV at 200 mA loadMaximum output current: 200 mAInput voltage range: 2.2 V to 5.5 VLow quiescent and shutdown currentInitial accuracy: ±1%Accuracy over line, load, and temperature: −2.5%/+1.5%5-lead TSOT package and 6-lead LFCSP packageAPPLICATIONSADC/DAC power suppliesRF, VCO, and PLL power suppliesPost dc-to-dc regulation
      		OTHERIn StockNew Sealed Under Guarantee
      RF Switches
      HMC595TR
      General DescriptionThe HMC594 is a GaAs PHEMT MMIC Low Noise Amplifi er (LNA) chip which operates from 2 to 4 GHz. The HMC594 features extremely fl at performance characteristics including 10 dB of small signal gain, 2.6 dB of noise fi gure and output IP3 of +36 dBm across the operating band. This versatile LNA is ideal for hybrid and MCM assemblies due to its compact size, consistent output power and DC blocked RF I/O’s. All data is measured with the chip in a 50 Ohm test fi xture connected via one 0.025 mm (1 mil) diameter bondwire of minimal length 0.31 mm (12 mil).FeaturesGain Flatness: ±0.2 dBNoise Figure: 2.6 dBGain: 10 dBOIP3: +36 dBmDC Supply: +6V @ 100 mA50 Ohm Matched Input/OutputDie Size: 1.32 x 1.21 x 0.10 mmTypical ApplicationsThe HMC594 is ideal for:• Fixed Microwave• Point-to-Multi-Point Radios• Test & Measurement Equipment• Radar & Sensors• Military & Space
      		OTHERIn StockNew Sealed Under Guarantee
      Microphones
      ADMP404ACEZ-RL
      The ADMP404ACEZ-RL parts manufactured by AD are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The ADMP404ACEZ-RL components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.The production status marked on Jotrin.com is for reference only. If you did not find what you were looking for, you can get more value information by email, such as the ADMP404ACEZ-RL Inventory quantity, preferential price, and manufacturer. We are always happy to hear from you so feel free to contact us.ADMP403XCE3-HX1Z with pin details manufactured by ADI. The ADMP403XCE3-HX1Z is available in LGA Package, is part of the IC Chips.ADMP404ACE7-HNZ with user guide manufactured by ADI. The ADMP404ACE7-HNZ is available in QFN Package, is part of the IC Chips.ADMP404ACEZ with circuit diagram manufactured by ADI. The ADMP404ACEZ is available in LGA Package, is part of the Microphones.
      		OTHERIn StockNew Sealed Under Guarantee
      ADMP803JCEZ-RL
      The ADMP803JCEZ-RL parts manufactured by AD are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The ADMP803JCEZ-RL components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.The production status marked on Jotrin.com is for reference only. If you did not find what you were looking for, you can get more value information by email, such as the ADMP803JCEZ-RL Inventory quantity, preferential price, and manufacturer. We are always happy to hear from you so feel free to contact us.The ADMP621ACEZ-RL is MIC MEMS DIGITAL OMNI -46DB, that includes ADMP621 Series, they are designed to operate with a MEMS (Silicon) Type, Packaging is shown on datasheet note for use in a Tape & Reel (TR), that offers Termination features such as Solder Pads, Voltage Rated is designed to work in 1.62 ~ 3.63V, as well as the 1.6mA Current Supply, the device can also be used as Bottom Port Location. In addition, the Size Dimension is 4.00mm L x 3.00mm W, the device is offered in Digital, PDM Output Type, the device has a Omnidirectional of Direction, and Frequency Range is 45Hz ~ 20kHz, and the Sensitivity is -46dB ±2dB @ 94dB SPL, and S N Ratio is 65dB, and the Seal Rating is None, and Height Max is 1.10mm, and the Shape is Rectangular.ADMP521ACEZ-RL7 with user guide manufactured by ADI. The ADMP521ACEZ-RL7 is available in LGA Package, is part of the Microphones.ADMP522ACEZ-RL7 with circuit diagram manufactured by ADI. is part of the Microphones.
      		OTHERIn StockNew Sealed Under Guarantee
      ADMP803JCEZ-RL
      The ADMP803JCEZ-RL parts manufactured by AD are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the world's leading manufacturers. The ADMP803JCEZ-RL components of Jotrin Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.The production status marked on Jotrin.com is for reference only. If you did not find what you were looking for, you can get more value information by email, such as the ADMP803JCEZ-RL Inventory quantity, preferential price, and manufacturer. We are always happy to hear from you so feel free to contact us.The ADMP621ACEZ-RL is MIC MEMS DIGITAL OMNI -46DB, that includes ADMP621 Series, they are designed to operate with a MEMS (Silicon) Type, Packaging is shown on datasheet note for use in a Tape & Reel (TR), that offers Termination features such as Solder Pads, Voltage Rated is designed to work in 1.62 ~ 3.63V, as well as the 1.6mA Current Supply, the device can also be used as Bottom Port Location. In addition, the Size Dimension is 4.00mm L x 3.00mm W, the device is offered in Digital, PDM Output Type, the device has a Omnidirectional of Direction, and Frequency Range is 45Hz ~ 20kHz, and the Sensitivity is -46dB ±2dB @ 94dB SPL, and S N Ratio is 65dB, and the Seal Rating is None, and Height Max is 1.10mm, and the Shape is Rectangular.ADMP521ACEZ-RL7 with user guide manufactured by ADI. The ADMP521ACEZ-RL7 is available in LGA Package, is part of the Microphones.ADMP522ACEZ-RL7 with circuit diagram manufactured by ADI. is part of the Microphones.
      		OTHERIn StockNew Sealed Under Guarantee
      AFB0812SHB-F00
      		OTHERIn StockNew Sealed Under Guarantee
      1.343098s