All
      0
      Cart

      • OTHER

      • Popular
      • Newest
      • Most reviews

      Power management

      Power management
      ModelDescriptionBrandLeadingConditionPriceAction
      Power management
      ICE2PCS01G
      		OTHERIn StockNew Sealed Under Guarantee
      IKA15N60T
      		OTHERIn StockNew Sealed Under Guarantee
      IKW40N120H3
      		OTHERIn StockNew Sealed Under Guarantee
      IPP200N15N3 G
      		OTHERIn StockNew Sealed Under Guarantee
      XDPE12284C-0000
      The XDP™ XDPE12284C is a digital dual-rail 8-phase controller that provides power for Intel VR13, VR13HC, IMVP8 and IMVP9 server, workstation, and high-end desktop applications. The controller offers flexible phase assignment between the two loops and can be configured in any of the following ways: 8+0, 7+1, ... ,4+4.The XDPE12284C controller utilizes digital technology to implement all control functions, providing the ultimate system solution in terms of flexibility and stability. Advanced control loop features, such as Active Transient Response (ATR) modulation and fast DVID response enable optimal response to high slew rate load transients. Programmable temperature compensation to current sense allows the designer to tailor the response for best load line accuracy over temperature.XDPE12284C also supports integrated power stages that provides integrated current sense and integrated temperature sense information.Summary of Features:Compliant with Intel VR13, VR13HC rev 1.3, IMVP8 rev 1.2 and IMVP9 rev 1.3 specificationsCompliant with Intel SVID rev 1.9.1 protocolCompliant with PMBus rev 1.3 compliant serial interfaceOutput voltage regulation range: 0.2 V to 3.04 VFlexible phase assignment between the two loops: 8+0, 7+1, … ,4+4 phasesNon-linear control for superior transient responseDigitally programmable loadlineDigital temperature compensation
      		OTHERIn StockNew Sealed Under Guarantee
      TLS850F1TAV50
      With an input voltage range of 3 V to 40 V and very low quiescent of only 40 μA, these regulators are perfectly suitable for automotive or any other supply systems connected to the battery permanently. The TLS850F1TAV50 provides an output voltage accuracy of 2 % and a maximum output current up to 500 mA. The new loop concept combines fast regulation and very good stability while requiring only one small ceramic capacitor of 1 μF at the output. At currents below 100 mA the device will have a very low typical dropout voltage of only 70 mV. The operating range starts already at input voltages of only 3 V (extended operating range). This makes the TLS850F1TAV50 also suitable to supply automotive systems that need to operate during cranking condition.Summary of Features:Wide Input Voltage Range from 3.0 V to 40 VFixed Output Voltage 5 VOutput Voltage Precision ≤ ± 2 %Output Current Capability up to 500 mAUltra Low Current Consumption typ. 40 µAVery Low Dropout Voltage typ. 70 mV@100 mAStable with Ceramic Output Capacitor of 1 µFDelayed Reset at Power-On: 8.5 msAdjustable Reset Threshold down to 2.50 VFast Watchdog timing with fixed 48 ms window and current dependent deactivationActivated at IQ > 5.5 mAEnable, Undervoltage Reset, Overtemperature ShutdownOutput Current LimitationWide Temperature RangeGreen Product (RoHS compliant)AEC Qualified
      		OTHERIn StockNew Sealed Under Guarantee
      TLS820F1ELV50
      With an input voltage range of 3 V to 40 V and very low quiescent of only 40 μA, these regulators are perfectly suitable for automotive or any other supply systems connected to the battery permanently. The TLS820F1ELV50 provides an output voltage accuracy of 2 % and a maximum output current up to 200 mA. The new loop concept combines fast regulation and very good stability while requiring only one small ceramic capacitor of 1 μF at the output. At currents below 100 mA the device will have a very low typical dropout voltage of only 70 mV. The operating range starts already at input voltages of only 3 V (extended operating range). This makes the TLS820F1ELV50 also suitable to supply automotive systems that need to operate during cranking condition. In addition, a Watchdog circuit with flexible timings is integrated to monitor the microcontroller‘s operation. Internal protection features like output current limitation and overtemperature shutdown are implemented to protect the device against immediate damage due to failures like output short circuit to GND, over-current and over-temperatures.Summary of Features:Wide Input Voltage Range from 3.0 V to 40 VFixed Output Voltage 5 VOutput Voltage Precision = ± 2 %Output Current Capability up to 200 mAUltra Low Current Consumption typ. 40 µAVery Low Dropout Voltage typ. 70 mV@100 mAStable with Ceramic Output Capacitor of 1 µFAdjustable Reset Threshold down to 2.50 VFlexible Watchdog and Reset timing with selectable windowEnable, Undervoltage Reset,Overtemperature ShutdownOutput Current LimitationWide Temperature Range up-to 150°CGreen Product (RoHS compliant)AEC Qualified
      		OTHERIn StockNew Sealed Under Guarantee
      TLS810B1EJV50
      With an input voltage range of 2.75 V to 42 V and ultra low quiescent of only 5.5 μA, the regulator is perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810B1xxV50 is the fixed 5 V output version with an accuracy of 2% and output current capability up to 100 mA. The new regulation concept implemented in TLS810B1 combines fast regulation and very good stability while requiring only a small ceramic capacitor of 1 μF at the output. The tracking region starts already at input voltages of 2.75 V (extended operating range). This makes the TLS810B1 also suitable to supply automotive systems that need to operate during cranking condition. Internal protection features like output current limitation and overtemperature shutdown are implemented to protect the device against immediate damage due to failures like output short circuit to GND, over-current and over-temperature. The device can be switched on and off by the Enable feature. When the device is switched off, the current consumption is typically less than 1 μA.Summary of Features:Ultra Low Quiescent Current of 5.5 μAWide Input Voltage Range of 2.75 V to 42 VOutput Current Capacity up to 100 mAOff Mode Current Less than 1 μALow Drop Out Voltage of typ. 200mV @ 100 mAOutput Current Limit ProtectionOvertemperature ShutdownEnableAvailable in PG-DSO-8 EP PackageAvailable in PG-TSON-10 PackageWide Temperature RangeGreen Product (RoHS Compliant)AEC Qualified
      		OTHERIn StockNew Sealed Under Guarantee
      TLS115B0LD
      The IC is designed to supply off-board systems, for example sensors in powertrain management systems under the severe conditions of automotive applications. Therefore, the IC is equipped with additional protection functions against reverse polarity and short circuit to GND and battery. With supply voltages up to 45 V, the output voltage follows the reference voltage applied at the adjust input with very high accuracy. The reference voltage applied to the adjust input can be down to 2.0 V and is able to drive loads up to 150 mA while the device follows the reference voltage (e.g. the 5 V output of a main voltage regulator) with very high precision.Summary of Features:150mA current capacityVery tight output tracking tolerance to referenceOutput voltage adjustable down to 2.0 VStable with ceramic output capacitorsVery low dropout voltageVery low current consumption in OFF modeInternally controlled soft start
      		OTHERIn StockNew Sealed Under Guarantee
      TLF35584QVVS2
      		OTHERIn StockNew Sealed Under Guarantee
      TLF35584QKVS1
      		OTHERIn StockNew Sealed Under Guarantee
      TLF35584QKVS2
      		OTHERIn StockNew Sealed Under Guarantee
      TLD5190QV
      This concept of a synchronous and seamless buck-boost regulation provides a very efficient solution for circuits where the output (load) voltage is on the same level as the input voltage, e.g. in short chains with 2 to 3 high power LEDs or laser diodes connected to a 12 V electrical system.Thanks to the flexibility to be used in current and in voltage mode it is also a perfect device for powering non LED applications like USB and mobile wireless charger or as multipurpose pre-regulation like for infotainment.As it comes without SPI it is also ideal for all application where a basic feature set is sufficient or where a Microcontroller is not used.Summary of Features:MOSFET H-Bridge with Single Inductor DC-DC Controller for high power BUCK-BOOST LED controlConstant Current and Constant Voltage RegulationWide VIN Range (Device 4.5V to 40V, Power Stage 4.5V to 55V)Wide LED forward voltage Range (2V up to 55V)LED current accuracy+/-3% at Tj=25° and 4% over the whole automotive temperature rangeSwitching Frequency Range from 200 kHz to 700 kHzMaximum Efficiency in every condition (up to 96%)Flexible current sense (Highside or Lowside)EMC optimized device: Features an auto Spread Spectrum concept to ensure best in class EMC performanceOpen Load, Overvoltages, Shorted LED fault and Overtemperature Diagnostic OutputsLED and Input current sense with dedicated monitor OutputsSmart power protection features for device and load (open load, short of Load, Overtemperature)Capability to supply Gate Drivers via external Voltage RegulatorAdjustable Soft StartEnhanced Dimming features to adjust average LED current and PWM dimmingAvailable in a small thermally enhanced VQFN-48-31 packageAutomotive AEC Qualified
      		OTHERIn StockNew Sealed Under Guarantee
      1EBN1001AE
      		OTHERIn StockNew Sealed Under Guarantee
      1ED020I12FA2
      		OTHERIn StockNew Sealed Under Guarantee
      1ED020I12-FT
      1ED020I12-FT is a galvanic isolated single channel gate driver in DSO-16 wide body package that provides an output current capability of typically 2 A. All logic pins are 5V CMOS compatible and could be directly connected to a microcontroller. The data transfer across galvanic isolation is realized by the integrated Coreless Transformer Technology. The 1ED-FT provides several protection features like IGBT desaturation protection, active Miller clamping, active shut down and two level turn off.Summary of Features:Single channel isolated gate driver IC (1ED-FT)For 600 V/1200 V IGBTs, MOSFETs, SiC MOSFETs, discrete and modules2 A rail-to-rail typical output currentPrecise DESAT protection, VCEsat detectionActive Miller Clamp, two level turn off (TLTOff)Active shutdown and Short circuit clamping28 V absolute Max. output supply voltage200/230 ns Max. propagation delay12/11 V output UVLO≥ 50 kV/µs CMTI
      		OTHERIn StockNew Sealed Under Guarantee
      1EDI20H12AH
      		OTHERIn StockNew Sealed Under Guarantee
      1EDI20N12AF
      EiceDRIVER™ Compact 1200 V single-channel isolated gate driver with 3.5/4 A typical sinking and sourcing peak output current in DSO-8 narrow package with 4 mm creepage distance for MOSFETs.1EDI20N12AF belongs to the EiceDRIVER™ 1ED Compact 150mil family (1ED-AF family). 1EDI20IN12AF offers separate sink and source output, 40 ns input filter, accurate and stable timing. The driver can operate over a wide supply voltage range, either unipolar or bipolar.Summary of Features:EiceDRIVER™ Compact single channel isolated gate driver familyFor 600 V, 650 V, 950 V MOSFETsGalvanically isolated coreless transformer gate driver4 A typical sinking and sourcing peak output current40 V absolute maximum output supply voltage120 ns propagation delay with 40 ns input filterHigh common-mode transient immunity CMTI >100 kV/μsSeparate source and sink outputsShort-circuit clamping and active shutdownDSO-8 150 mil narrow-body package with 4 mm creepage distance8 V/10 V undervoltage lockout (UVLO) protection with hysteresis
      		OTHERIn StockNew Sealed Under Guarantee
      1EDI60H12AH
      		OTHERIn StockNew Sealed Under Guarantee
      1EDN7511B
      1-channel MOSFET gate driver ICs are the crucial link between control ICs and powerful MOSFET and GaN switching devices. Gate driver ICs enable high system level efficiencies, excellent power density and consistent system robustness.1EDN family: Fast, precise, strong and compatibleHighly efficient SMPS enabled by 5 ns short slew rates and ±5ns propagation delay precision for fast MOSFET and GaN switching Separate source and sink outputs simplify the application design Industry standard packages and pinout ease system design upgrades.Summary of Features:1EDN family: The new reference in ruggedness and low power dissipation-10V robustness of control and enable inputs provides crucial safety margin when driving pulse transformers5A reverse output current robustness eliminates the need for Schottky switching diodes when driving MOSFETs in TO-220 and TO-247 packagesCool driver ICs thanks to true rail-to-rail low impedance output stages4V and 8V UVLO (Under Voltage Lock Out) options for instant MOSFET protection during start-up and under abnormal conditionsPotential Applications:PFCSynchronous rectificationDC-DC convertersTelecom bricksPower toolsIndustrial SMPSMotor controlWireless charging
      		OTHERIn StockNew Sealed Under Guarantee
      0.557040s