Infineon

Model	Description	Brand	Leading	Condition
MOSFETs
AOD2210	The PCA9306 is a dual bidirectional I2C-bus and SMBus voltage-level translator with an enable (EN) input, and is operational from 1.0 V to 3.6 V (Vref(1)) and 1.8 V to 5.5 V (Vbias(ref)(2)).The PCA9306 allows bidirectional voltage translations between 1.0 V and 5 V without the use of a direction pin. The low ON-state resistance (Ron) of the switch allows connections to be made with minimal propagation delay. When EN is HIGH, the translator switch is on, and the SCL1 and SDA1 I/O are connected to the SCL2 and SDA2 I/O, respectively, allowing bidirectional data flow between ports. When EN is LOW, the translator switch is off, and a high-impedance state exists between ports.The PCA9306 is not a bus buffer like the PCA9509 or PCA9517A that provide both level translation and physically isolate the capacitance to either side of the bus when both sides are connected. The PCA9306 only isolates both sides when the device is disabled and provides voltage level translation when active	OTHER	In Stock	New Sealed Under Guarantee
AOD2922	• Latest Trench Power AlphaMOS (αMOS MV) technology• Very Low RDS(ON)• Low Gate Charge• Optimized for fast-switching applications• RoHS and Halogen-Free Compliant Application • Synchronus Rectification in DC/DC and AC/DC Converters• Isolated DC/DC Converters in Telecom and Industrial	OTHER	In Stock	New Sealed Under Guarantee
IRF3205PBF	Advanced Process TechnologyUla Low On-ResistanceDynamic dv/dt Rating175°C Operating TemperatureFast SwitchingFully Avalanche RatedLead-Free Advanced HEXFET® Power MOSFETs from International Rectifier utilize advanced processing techniques to achieve exemely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET power MOSFETs are well known for, provides the designer with an exemely efficient and reliable device for use in a wide variety of applications.The TO-220 package is universally preferred for all commercial-indusial applications at power dissipation levels to approximately 50 watts. The low thermal resistance and low package cost of the TO-220 conibute to its wide acceptance throughout the indusy	OTHER	In Stock	New Sealed Under Guarantee
IRF630NPBF	Advanced Process TechnologyUla Low On-ResistanceDynamic dv/dt Rating175°C Operating TemperatureFast SwitchingFully Avalanche RatedLead-Free Fifth Generation HEXFET® Power MOSFETs from International Rectifier utilize advanced processing techniques to achieve exemely low on-resistance per silicon area. This benefit, combined with the fast witching speed and ruggedized device design that HEXFET Power MOSFETs are well known for, provides the designer with an exemely efficient and reliable device for use in a wide variety of applications. The TO-220 package is universally preferred for all commercial-indusial applications at power dissipation levels to approximately 50 watts. The low thermal resistance and low package cost of the TO-220 conibute to its wide acceptance throughout the indusy. The D2Pak is a surface mount power package capable of accommodating die sizes up to HEX-4. It provides the highest power capability and the lowest possible onresistance in any existing surface mount package. The D2Pak is suitable for high current applications because of its low internal connection resistance and can dissipate up to 2.0W in a typical surface mount application. The through-hole version (IRF640NL) is available for lowprofile application.	OTHER	In Stock	New Sealed Under Guarantee
IRF640NPBF	Advanced Process TechnologyUla Low On-ResistanceDynamic dv/dt Rating175°C Operating TemperatureFast SwitchingFully Avalanche RatedLead-Free Fifth Generation HEXFET® Power MOSFETs from International Rectifier utilize advanced processing techniques to achieve exemely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET Power MOSFETs are well known for, provides the designer with an exemely efficient and reliable device for use in a wide variety of applications.The TO-220 package is universally preferred for all commercial-indusial applications at power dissipation levels to approximately 50 watts. The low thermal resistance and low package cost of the TO-220 conibute to its wide acceptance throughout the indusy.The D2Pak is a surface mount power package capable of accommodating die sizes up to HEX-4. It provides the highest power capability and the lowest possible onresistance in any existing surface mount package. The D2Pak is suitable for high current applications because of its low internal connection resistance and can dissipate up to 2.0W in a typical surface mount application.The through-hole version (IRF640NL) is available for lowprofile application.	OTHER	In Stock	New Sealed Under Guarantee
SPP04N50C3	Low specific on-state resistance (RDS(on)*A)Very low energy storage in output capacitance (Eoss) @400VLow gate charge (Qg)Fieldproven CoolMOS™ qualityCoolMOS™ technology has been manufactured by Infineon since 1998	OTHER	In Stock	New Sealed Under Guarantee
IRF7311PBF	Planar cell sucture for wide SOAOptimized for broadest availability from disibution partnersProduct qualification according to JEDEC standardSilicon optimized for applications switching below <100KHzIndusy standard surface-mount power packageCapable of being wave-soldered RoHS CompliantLow RDS(on)Dynamic dv/dt RatingFast SwitchingDual N-Channel MOSFET	OTHER	In Stock	New Sealed Under Guarantee
IRF7314PbF	Planar cell sucture for wide SOAOptimized for broadest availability from disibution partnersProduct qualification according to JEDEC standardSilicon optimized for applications switching below <100KHzIndusy standard surface-mount power packageCapable of being wave-soldered RoHS CompliantLow RDS(on)Dynamic dv/dt RatingFast SwitchingDual P-Channel MOSFET	OTHER	In Stock	New Sealed Under Guarantee
IRF7451PbF	Planar cell sucture for wide SOAOptimized for broadest availability from disibution partnersProduct qualification according to JEDEC standardSilicon optimized for applications switching below <100KHzIndusy standard surface-mount power packageCapable of being wave-soldered RoHS CompliantIndusy-leading qualityFully Characterized Avalanche Voltage and CurrentLow Gate-to-Drain Charge to Reduce Switching LossesFully Characterized Capacitance Including Effective Coss to Simplify Design	OTHER	In Stock	New Sealed Under Guarantee
IRF7494PBF	Optimized for broadest availability from distribution partnersProduct qualification according to JEDEC standardOptimized for 10 V gate-drive voltage (called normal level)Industry standard surface-mount power packageCapable of being wave-soldered	OTHER	In Stock	New Sealed Under Guarantee
IRF7811AVPBF	• N-Channel Application-Specific MOSFETs• Ideal for CPU Core DC-DC Converters• Low Conduction Losses• Low Switching Losses• Minimizes Parallel MOSFETs for high currentapplications• 100% RG Tested• Lead-Free This new device employs advanced HEXFET Power MOSFET technology to achieve an unprecedented balance of on-resistance and gate charge. The reduced conduction and switching losses make it ideal for high efficiency DC-DC converters that power the latest generation of microprocessors. The IRF7811AV has been optimized for all parameters that are critical in synchronous buck converters including RDS(on), gate charge and Cdv/dt-induced turn-on immunity.The IRF7811AV offers an extremely low combination of Qsw & RDS(on) for reduced losses in both control and synchronous FET applications. The package is designed for vapor phase, infra-red, convection, or wave soldering techniques. Power dissipation of greater than 2W is possible in a typical PCB mount application.	OTHER	In Stock	New Sealed Under Guarantee
IRF7821PBF	RoHS CompliantIndustry-leading qualityLow RDS(ON) at 4.5V VGSFully Characterized Avalanche Voltage and CurrentUltra-Low Gate Impedance	OTHER	In Stock	New Sealed Under Guarantee
IRF7832PBF	RoHS CompliantIndustry-leading qualityLow RDS(ON) at 4.5V VGSFully Characterized Avalanche Voltage and CurrentUltra-Low Gate Impedance Synchronous MOSFET for Notebook Processor Power Synchronous Rectifier MOSFET forIsolated DC-DC Converters inNetworking Systems Lead-Free	OTHER	In Stock	New Sealed Under Guarantee
IRF7910PBF	High Frequency 3.3V and 5V input Point- of-Load Synchronous Buck Converters for Netcom and Computing ApplicationsPower Management for Netcom, Computing and Portable Applications Lead-Free Ultra-Low Gate Impedance Very Low RDS(on) Fully Characterized Avalanche Voltage and Current	OTHER	In Stock	New Sealed Under Guarantee
IRF830PBF	Optimized for broadest availability from distribution partnersOptimized for 4.5V gate-drive voltage(called Logic level), capable of being driven at 2.5V gate-drive voltage (called Super Logic level)Reduced design complexity in high-side configuration (vs N-channel device)Easier interface to Microcontroller (vs N-channel device)	OTHER	In Stock	New Sealed Under Guarantee
IRF9321PBF	Optimized for broadest availability from distribution partnersOptimized for 4.5V gate-drive voltage(called Logic level), capable of being driven at 2.5V gate-drive voltage (called Super Logic level)Reduced design complexity in high-side configuration (vs N-channel device)Easier interface to Microcontroller (vs N-channel device)	OTHER	In Stock	New Sealed Under Guarantee
IRF9530NPBF	The IR MOSFET family of power MOSFETs utilizes proven silicon processes offering designers a wide portfolio of devices to support various applications such as DC motors, inverters, SMPS, lighting, load switches as well as battery powered applications.The devices are available in a variety of surface mount and through-hole packages with industry standard footprints for ease of design. Planar cell structure for wide SOAOptimized for broadest availability from distribution partnersProduct qualification according to JEDEC standardSilicon optimized for applications switching below <100kHzIndustry standard through-hole power packageHigh-current rating	OTHER	In Stock	New Sealed Under Guarantee
IRF9Z34NPBF	The IR MOSFET family of power MOSFETs utilizes proven silicon processes offering designers a wide portfolio of devices to support various applications such as DC motors, inverters, SMPS, lighting, load switches as well as battery powered applications.The devices are available in a variety of surface mount and through-hole packages with industry standard footprints for ease of design. Planar cell structure for wide SOAOptimized for broadest availability from distribution partnersProduct qualification according to JEDEC standardSilicon optimized for applications switching below <100kHzIndustry standard through-hole power packageHigh-current rating	OTHER	In Stock	New Sealed Under Guarantee
IRFB3077PBF	The IR MOSFET™ family of power MOSFETs utilizes proven silicon processes offering designers a wide portfolio of devices to support various applications such as DC motors, inverters, SMPS, lighting, load switches as well as battery powered applications. The devices are available in a variety of surface mount and through-hole packages with industry standard footprints for ease of design. The optimized gate drive options enables designers the flexibility of selecting super, logic or normal level drives. Optimized for broadest availability from distribution partnersProduct qualification according to JEDEC standardIndustry standard through-hole power packageHigh-current carrying capability packageApplicationsHigh Efficiency Synchronous Rectification in SMPSUninterruptible Power SupplyHigh Speed Power SwitchingHard Switched and High Frequency Circuits	OTHER	In Stock	New Sealed Under Guarantee
IRFP150MPBF	The IR MOSFET family of power MOSFETs utilizes proven silicon processes offering designers a wide portfolio of devices to support various applications such as DC motors, inverters, SMPS, lighting, load switches as well as battery powered applications.The devices are available in a variety of surface mount and through-hole packages with industry standard footprints for ease of design. Planar cell structure for wide SOAOptimized for broadest availability from distribution partnersProduct qualification according to JEDEC standardSilicon optimized for applications switching below <100kHzIndustry standard through-hole power packageHigh current rating	OTHER	In Stock	New Sealed Under Guarantee

IGBTs
IRG4BC20UPBF	Potential Applications:Air ConditionerDishwasherFanPFCPumpWashing Machine	OTHER	In Stock	New Sealed Under Guarantee
KA9238HA1(sleeve)	KA9238HA1(sleeve) Kaku KAKU AC axial flow sleeve FAN 929238mm ,AC/DC AC,Size(MM) 929238,Bearing Sleeve ,Voltage(V) 110/120,Frequency(Hz) 50/60,Current(A) 0.1/0.08,Power(W) 20/18,Speed(RPM) 2700/3200,Max Air Flow(CFM) 18/22,Max Static Pressure(Inch-H2O) 0.12/0.15,Noise(dB) 30/32,Weight(g) 210	OTHER	In Stock	New Sealed Under Guarantee
Transistors & Diodes
BC847BW	• For AF input stages and driver applications• High current gain• Low collector-emitter saturation voltage• Low noise between 30 Hz and 15 kHz• Complementary types: BC857...-BC860...(PNP)• Pb-free (RoHS compliant) package• Qualified according AEC Q1011) Potential Applications:For AF input stages and driver applications	Diodes	In Stock	New Sealed Under Guarantee
BCR141W	• Switching circuit, inverter, interface circuit, driver circuit• Built in bias resistor (R1=22kΩ, R2=22kΩ)• BCR141S : Two internally isolated transistors with good matching in one multichip package• BCR141S: For orientation in reel see package information below• Pb-free (RoHS compliant) package• Qualified according AEC Q101	OTHER	In Stock	New Sealed Under Guarantee
SMBT2907A	Low collector-emitter saturation voltage Complementary type: SMBT2222A / MMBT2222A (NPN) Pb-free (RoHS compliant) package Qualified according AEC Q101	OTHER	In Stock	New Sealed Under Guarantee
Power management
ICE2PCS01G	ICE2PCS0x/G are the 2nd generation of Continuous Conduction Mode (CCM) PFC controllers, which employ BiCMOS technology. Compared to the 1 st generation of ICE1PCS01/02, the new ICs have lower internal reference trimmed at 3V. They also have other advantages such as wider Vcc operating range, improved internal oscillator and additional direct bulk capacitor over-voltage protection. 8 pins CCM PFC simpilfy the design procedures.Build-in protection features save system BOM cost and enhance system safety.	OTHER	In Stock	New Sealed Under Guarantee
IKA15N60T	Hard-switching 600 V, 15 A TRENCHSTOP™ IGBT3 Discrete copacked with full-rated external free-wheeling diode in a TO-220 Full-Pak package, leads to significant improvement of static as well as dynamic performance of the device, due to the combination of trench-cell and fieldstop concept. The combination of IGBT with soft recovery emitter controlled diode further minimizes the turn-on losses. The highest efficiency is reached due to the best compromise between switching and conduction losses.	OTHER	In Stock	New Sealed Under Guarantee
IKW40N120H3	High speed 1200 V, 40 A hard-switching TRENCHSTOP™ IGBT4 co-packed with free-wheeling diode in a TO-247 package provides the best compromise between switching and conduction losses. The key feature of this family is a MOSFET-like turn-off switching behavior, leading to low turn off losses. Low switching and conduction lossesVery good EMI behaviorCan be used with a small gate resistor for reduced delay time and voltage overshootHigh current densityBest-in-class 1200 V IGBT efficiency and EMI behavior	OTHER	In Stock	New Sealed Under Guarantee
IPP200N15N3 G	The 150V OptiMOS™ achieves a reduction in R DS(on) of 40% and of 45% in figure of merit (FOM) compared to the next best competitor. This drastic improvement opens new possibilities like moving from leaded packages to SMD packages or effectively replacing two old parts with one OptiMOS™ part. • N-channel, normal level• Excellent gate charge x R DS(on) product (FOM)• Very low on-resistance R DS(on)• 175 °C operating temperature• Pb-free lead plating; RoHS compliant• Qualified according to JEDEC1) for target application• Ideal for high-frequency switching and synchronous rectification• Halogen-free according to IEC61249-2-21	OTHER	In Stock	New Sealed Under Guarantee
XDPE12284C-0000	The XDP™ XDPE12284C is a digital dual-rail 8-phase controller that provides power for Intel VR13, VR13HC, IMVP8 and IMVP9 server, workstation, and high-end desktop applications. The controller offers flexible phase assignment between the two loops and can be configured in any of the following ways: 8+0, 7+1, ... ,4+4.The XDPE12284C controller utilizes digital technology to implement all control functions, providing the ultimate system solution in terms of flexibility and stability. Advanced control loop features, such as Active Transient Response (ATR) modulation and fast DVID response enable optimal response to high slew rate load transients. Programmable temperature compensation to current sense allows the designer to tailor the response for best load line accuracy over temperature.XDPE12284C also supports integrated power stages that provides integrated current sense and integrated temperature sense information.Summary of Features:Compliant with Intel VR13, VR13HC rev 1.3, IMVP8 rev 1.2 and IMVP9 rev 1.3 specificationsCompliant with Intel SVID rev 1.9.1 protocolCompliant with PMBus rev 1.3 compliant serial interfaceOutput voltage regulation range: 0.2 V to 3.04 VFlexible phase assignment between the two loops: 8+0, 7+1, … ,4+4 phasesNon-linear control for superior transient responseDigitally programmable loadlineDigital temperature compensation	OTHER	In Stock	New Sealed Under Guarantee
TLS850F1TAV50	With an input voltage range of 3 V to 40 V and very low quiescent of only 40 μA, these regulators are perfectly suitable for automotive or any other supply systems connected to the battery permanently. The TLS850F1TAV50 provides an output voltage accuracy of 2 % and a maximum output current up to 500 mA. The new loop concept combines fast regulation and very good stability while requiring only one small ceramic capacitor of 1 μF at the output. At currents below 100 mA the device will have a very low typical dropout voltage of only 70 mV. The operating range starts already at input voltages of only 3 V (extended operating range). This makes the TLS850F1TAV50 also suitable to supply automotive systems that need to operate during cranking condition.Summary of Features:Wide Input Voltage Range from 3.0 V to 40 VFixed Output Voltage 5 VOutput Voltage Precision ≤ ± 2 %Output Current Capability up to 500 mAUltra Low Current Consumption typ. 40 µAVery Low Dropout Voltage typ. 70 mV@100 mAStable with Ceramic Output Capacitor of 1 µFDelayed Reset at Power-On: 8.5 msAdjustable Reset Threshold down to 2.50 VFast Watchdog timing with fixed 48 ms window and current dependent deactivationActivated at IQ > 5.5 mAEnable, Undervoltage Reset, Overtemperature ShutdownOutput Current LimitationWide Temperature RangeGreen Product (RoHS compliant)AEC Qualified	OTHER	In Stock	New Sealed Under Guarantee
TLS820F1ELV50	With an input voltage range of 3 V to 40 V and very low quiescent of only 40 μA, these regulators are perfectly suitable for automotive or any other supply systems connected to the battery permanently. The TLS820F1ELV50 provides an output voltage accuracy of 2 % and a maximum output current up to 200 mA. The new loop concept combines fast regulation and very good stability while requiring only one small ceramic capacitor of 1 μF at the output. At currents below 100 mA the device will have a very low typical dropout voltage of only 70 mV. The operating range starts already at input voltages of only 3 V (extended operating range). This makes the TLS820F1ELV50 also suitable to supply automotive systems that need to operate during cranking condition. In addition, a Watchdog circuit with flexible timings is integrated to monitor the microcontroller‘s operation. Internal protection features like output current limitation and overtemperature shutdown are implemented to protect the device against immediate damage due to failures like output short circuit to GND, over-current and over-temperatures.Summary of Features:Wide Input Voltage Range from 3.0 V to 40 VFixed Output Voltage 5 VOutput Voltage Precision = ± 2 %Output Current Capability up to 200 mAUltra Low Current Consumption typ. 40 µAVery Low Dropout Voltage typ. 70 mV@100 mAStable with Ceramic Output Capacitor of 1 µFAdjustable Reset Threshold down to 2.50 VFlexible Watchdog and Reset timing with selectable windowEnable, Undervoltage Reset,Overtemperature ShutdownOutput Current LimitationWide Temperature Range up-to 150°CGreen Product (RoHS compliant)AEC Qualified	OTHER	In Stock	New Sealed Under Guarantee
TLS810B1EJV50	With an input voltage range of 2.75 V to 42 V and ultra low quiescent of only 5.5 μA, the regulator is perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810B1xxV50 is the fixed 5 V output version with an accuracy of 2% and output current capability up to 100 mA. The new regulation concept implemented in TLS810B1 combines fast regulation and very good stability while requiring only a small ceramic capacitor of 1 μF at the output. The tracking region starts already at input voltages of 2.75 V (extended operating range). This makes the TLS810B1 also suitable to supply automotive systems that need to operate during cranking condition. Internal protection features like output current limitation and overtemperature shutdown are implemented to protect the device against immediate damage due to failures like output short circuit to GND, over-current and over-temperature. The device can be switched on and off by the Enable feature. When the device is switched off, the current consumption is typically less than 1 μA.Summary of Features:Ultra Low Quiescent Current of 5.5 μAWide Input Voltage Range of 2.75 V to 42 VOutput Current Capacity up to 100 mAOff Mode Current Less than 1 μALow Drop Out Voltage of typ. 200mV @ 100 mAOutput Current Limit ProtectionOvertemperature ShutdownEnableAvailable in PG-DSO-8 EP PackageAvailable in PG-TSON-10 PackageWide Temperature RangeGreen Product (RoHS Compliant)AEC Qualified	OTHER	In Stock	New Sealed Under Guarantee
TLS115B0LD	The IC is designed to supply off-board systems, for example sensors in powertrain management systems under the severe conditions of automotive applications. Therefore, the IC is equipped with additional protection functions against reverse polarity and short circuit to GND and battery. With supply voltages up to 45 V, the output voltage follows the reference voltage applied at the adjust input with very high accuracy. The reference voltage applied to the adjust input can be down to 2.0 V and is able to drive loads up to 150 mA while the device follows the reference voltage (e.g. the 5 V output of a main voltage regulator) with very high precision.Summary of Features:150mA current capacityVery tight output tracking tolerance to referenceOutput voltage adjustable down to 2.0 VStable with ceramic output capacitorsVery low dropout voltageVery low current consumption in OFF modeInternally controlled soft start	OTHER	In Stock	New Sealed Under Guarantee
TLF35584QVVS2	The wide switching frequency range allows optimization in respect of efficiency and usage of small filter components. A dedicated reference-regulator supplies the ADC independent from μC-load steps and acts as tracking-source for the 2 independent sensor-supplies. The flexible state machine, wake-up concept including timer, and the stand-by-regulator favors the usage in numerous applications.Multiple safety features enable easy realization of ASIL-D together with various Microcontrollers (μCs). The TLF35584 is coming in small, thermally enhanced VQFN-48 (QV-version) capable for automated optical inspection.	OTHER	In Stock	New Sealed Under Guarantee
TLF35584QKVS1	The wide switching frequency range allows optimization in respect of efficiency and usage of small filter components. A dedicated reference-regulator supplies the ADC independent from μC-load steps and acts as tracking-source for the 2 independent sensor-supplies. The flexible state machine, wake-up concept including timer, and the stand-by-regulator favors the usage in numerous applications.Multiple safety features enable easy realization of ASIL-D together with various Microcontrollers (μCs). The TLF35584 is coming in a thermally enhanced LQFP-64 (QK-version) capable for automated optical inspection.	OTHER	In Stock	New Sealed Under Guarantee
TLF35584QKVS2	The wide switching frequency range allows optimization in respect of efficiency and usage of small filter components. A dedicated reference-regulator supplies the ADC independent from μC-load steps and acts as tracking-source for the 2 independent sensor-supplies. The flexible state machine, wake-up concept including timer, and the stand-by-regulator favors the usage in numerous applications.Multiple safety features enable easy realization of ASIL-D together with various Microcontrollers (μCs). The TLF35584 is coming in a thermally enhanced LQFP-64 (QK-version) capable for automated optical inspection.	OTHER	In Stock	New Sealed Under Guarantee
TLD5190QV	This concept of a synchronous and seamless buck-boost regulation provides a very efficient solution for circuits where the output (load) voltage is on the same level as the input voltage, e.g. in short chains with 2 to 3 high power LEDs or laser diodes connected to a 12 V electrical system.Thanks to the flexibility to be used in current and in voltage mode it is also a perfect device for powering non LED applications like USB and mobile wireless charger or as multipurpose pre-regulation like for infotainment.As it comes without SPI it is also ideal for all application where a basic feature set is sufficient or where a Microcontroller is not used.Summary of Features:MOSFET H-Bridge with Single Inductor DC-DC Controller for high power BUCK-BOOST LED controlConstant Current and Constant Voltage RegulationWide VIN Range (Device 4.5V to 40V, Power Stage 4.5V to 55V)Wide LED forward voltage Range (2V up to 55V)LED current accuracy+/-3% at Tj=25° and 4% over the whole automotive temperature rangeSwitching Frequency Range from 200 kHz to 700 kHzMaximum Efficiency in every condition (up to 96%)Flexible current sense (Highside or Lowside)EMC optimized device: Features an auto Spread Spectrum concept to ensure best in class EMC performanceOpen Load, Overvoltages, Shorted LED fault and Overtemperature Diagnostic OutputsLED and Input current sense with dedicated monitor OutputsSmart power protection features for device and load (open load, short of Load, Overtemperature)Capability to supply Gate Drivers via external Voltage RegulatorAdjustable Soft StartEnhanced Dimming features to adjust average LED current and PWM dimmingAvailable in a small thermally enhanced VQFN-48-31 packageAutomotive AEC Qualified	OTHER	In Stock	New Sealed Under Guarantee
1EBN1001AE	IGBT / MOSFET gate driver booster for automotive motor drives above 10 kW, peak current up to ±15 A, support for active clamping with very fast reaction time, active clamping disable and ASC Input signals.Summary of Features:Single Channel IGBT / MOSFET Gate Driver BoosterSuitable for IGBT classes up to 650 V / 800A and 1200 V / 400ALow propagation delay and minimal PWM distortionSeparate turn-on and turn-off signals pathesSupport for negative turn-off bias14-pin PG-DSO-14 exposed pad green packageAEC-Q100 qualified	OTHER	In Stock	New Sealed Under Guarantee
1ED020I12FA2	Summary of Features:Coreless transformer isolated driverBasic insulation according to DIN EN 60747-5-2, pendingIntegrated protection featuresSuitable for operation at high ambient temperatureAutomotive Qualified2A rail-to-rail outputV(cesat)-detectionActive Miller Clamp	OTHER	In Stock	New Sealed Under Guarantee
1ED020I12-FT	1ED020I12-FT is a galvanic isolated single channel gate driver in DSO-16 wide body package that provides an output current capability of typically 2 A. All logic pins are 5V CMOS compatible and could be directly connected to a microcontroller. The data transfer across galvanic isolation is realized by the integrated Coreless Transformer Technology. The 1ED-FT provides several protection features like IGBT desaturation protection, active Miller clamping, active shut down and two level turn off.Summary of Features:Single channel isolated gate driver IC (1ED-FT)For 600 V/1200 V IGBTs, MOSFETs, SiC MOSFETs, discrete and modules2 A rail-to-rail typical output currentPrecise DESAT protection, VCEsat detectionActive Miller Clamp, two level turn off (TLTOff)Active shutdown and Short circuit clamping28 V absolute Max. output supply voltage200/230 ns Max. propagation delay12/11 V output UVLO≥ 50 kV/µs CMTI	OTHER	In Stock	New Sealed Under Guarantee
1EDI20H12AH	EiceDRIVER™ 1200 V high side gate driver IC with typical 4.0 A source and 3.5 A sink in a wide-body DSO-8 package with CT technology for IGBT Modules.For higher isolation rating, higher current, shorter propagation delay, check out our newly released X3 Compact family, 1ED3120MU12H. The DSO-8 150mil narrow body version with great price performance ratio is also available: 1EDI20N12AF.Summary of Features:1200V coreless Transformer isolated Driver ICs2 A rail-to-rail outputs300 mil wide-body package for 8 mm creepage distanceSeparate source/sink outputsApplications:Brushless DC motor (BLDC) - controller and driverIndustrial heating and weldingSmart induction cooktop – precise heating controlSolutions for solar energy systemsUninterruptible Power Supply (UPS)	OTHER	In Stock	New Sealed Under Guarantee
1EDI20N12AF	EiceDRIVER™ Compact 1200 V single-channel isolated gate driver with 3.5/4 A typical sinking and sourcing peak output current in DSO-8 narrow package with 4 mm creepage distance for MOSFETs.1EDI20N12AF belongs to the EiceDRIVER™ 1ED Compact 150mil family (1ED-AF family). 1EDI20IN12AF offers separate sink and source output, 40 ns input filter, accurate and stable timing. The driver can operate over a wide supply voltage range, either unipolar or bipolar.Summary of Features:EiceDRIVER™ Compact single channel isolated gate driver familyFor 600 V, 650 V, 950 V MOSFETsGalvanically isolated coreless transformer gate driver4 A typical sinking and sourcing peak output current40 V absolute maximum output supply voltage120 ns propagation delay with 40 ns input filterHigh common-mode transient immunity CMTI >100 kV/μsSeparate source and sink outputsShort-circuit clamping and active shutdownDSO-8 150 mil narrow-body package with 4 mm creepage distance8 V/10 V undervoltage lockout (UVLO) protection with hysteresis	OTHER	In Stock	New Sealed Under Guarantee
1EDI60H12AH	EiceDRIVER™ 1200 V high side gate driver IC with typical typical 10.0 A source and 9.4 A sink currents in DSO-8 package for IGBT.For higher isolation rating, higher current, shorter propagation delay, check out our newly released X3 Compact family, 1ED3124MU12H. The DSO-8 150 mil narrow body version with great price performance ratio is also available: 1EDI60N12AF.Summary of Features:1200V coreless Transformer isolated Driver ICs6 A rail-to-rail outputs300 mil wide-body package for 8 mm creepage distanceSeparate source/sink outputsApplicationsMotor control and drivesPower Management (SMPS) - Reference DesignSolutions for solar energy systems	OTHER	In Stock	New Sealed Under Guarantee
1EDN7511B	1-channel MOSFET gate driver ICs are the crucial link between control ICs and powerful MOSFET and GaN switching devices. Gate driver ICs enable high system level efficiencies, excellent power density and consistent system robustness.1EDN family: Fast, precise, strong and compatibleHighly efficient SMPS enabled by 5 ns short slew rates and ±5ns propagation delay precision for fast MOSFET and GaN switching Separate source and sink outputs simplify the application design Industry standard packages and pinout ease system design upgrades.Summary of Features:1EDN family: The new reference in ruggedness and low power dissipation-10V robustness of control and enable inputs provides crucial safety margin when driving pulse transformers5A reverse output current robustness eliminates the need for Schottky switching diodes when driving MOSFETs in TO-220 and TO-247 packagesCool driver ICs thanks to true rail-to-rail low impedance output stages4V and 8V UVLO (Under Voltage Lock Out) options for instant MOSFET protection during start-up and under abnormal conditionsPotential Applications:PFCSynchronous rectificationDC-DC convertersTelecom bricksPower toolsIndustrial SMPSMotor controlWireless charging	OTHER	In Stock	New Sealed Under Guarantee

Switchs
BTS141	Features: • Logic Level Input • Input Protection (ESD) •=Thermal shutdown with latch • Overload protection • Short circuit protection • Overvoltage protection • Current limitation • Status feedback with external input resistor • Analog driving possible • AEC qualified • Green product (RoHS compliant) Application: • All kinds of resistive, inductive and capacitive loads in switching or linear applications • μC compatible power switch for 12 V and 24 V DC applications • Replaces electromechanical relays and discrete circuits	OTHER	In Stock	New Sealed Under Guarantee
ITS4142N	High side power switch with integrated vertical power FET, providing embedded protection and diagnostic functions. Summary of Features:Short circuit protectionCurrent limitationOverload protectionOvervoltage protection (including load dump)Undervoltage shutdown with autorestart and hysteresisSwitching inductive loadsClamp of negative voltage at output with inductive loadsCMOS compatible inputThermal shutdown with restartESD - ProtectionLoss of GND and loss of Vbb protectionVery low standby currentReverse battery protection with external resistorImproved electromagnetic compatibility (EMC)	OTHER	In Stock	New Sealed Under Guarantee
Microcontroller
XMC4800F144K2048AA	The XMC4800 device is a member of the XMC4000 family of microcontrollers based on the ARM Cortex-M4 processor core. The growing complexity of today's energy efficient embedded control applications are demanding microcontroller solutions with higher performance CPU cores featuring DSP and FPU capabilities. The XMC4800 family of microcontrollers take advantage of Infineon's decades of experience in the industrial market to provide an optimized solution to meet the performance challenges of today's embedded control applications. First-ever EtherCAT ® node on an ARM ® Cortex ®-M microcontroller with on-chip flash and analog/mixed signal capabilities. Summary of Features: ARM ® Cortex ®-M4 @ 144MHz2048kB Flash, 352kB RAMData and IP Protection on FlashSupply voltage range: 3.13 - 3.63VEtherCAT ® node6 x CAN nodesEthernetMAC, USB-OTG, SD/MMC6 channel USIC (configurable to SPI, UART, IIC, IIS)External Bus Unit4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion2 channel 12bit DAC4 channel ∆Σ Demodulator24 x 16-bit special purpose timers, dead time generation2 x Position InterfaceWatch Dog Timer, Real Time ClockXMC4000 Functional Safety PackagePackage: LQFP144Temperature range:-40 - 125°CSDIO/SD/MMC InterfaceARM ® Cortex ®-M4 @ 144MHz2048kB Flash, 352kB RAMData and IP Protection on FlashSupply voltage range: 3.13 - 3.63VEtherCAT ® node6 x CAN nodesEthernetMAC, USB-OTG, SD/MMC6 channel USIC (configurable to SPI, UART, IIC, IIS)External Bus Unit4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion2 channel 12bit DAC4 channel △Σ Demodulator24 x 16-bit special purpose timers, dead time generation2 x Position InterfaceWatch Dog Timer, Real Time ClockXMC4000 Functional Safety PackagePackage: LQFP144Temperature range:-40 - 125°CSDIO/SD/MMC Interface	OTHER	In Stock	New Sealed Under Guarantee
XMC4800F100K1024AA	The XMC4800 device is a member of the XMC4000 family of microcontrollers based on the ARM Cortex-M4 processor core. The growing complexity of today's energy efficient embedded control applications are demanding microcontroller solutions with higher performance CPU cores featuring DSP and FPU capabilities. The XMC4800 family of microcontrollers take advantage of Infineon's decades of experience in the industrial market to provide an optimized solution to meet the performance challenges of today's embedded control applications. First-ever EtherCAT ® node on an ARM ® Cortex ®-M microcontroller with on-chip flash and analog/mixed signal capabilities. Summary of Features: ARM ® Cortex ®-M4 @ 144MHz2048kB Flash, 352kB RAMData and IP Protection on FlashSupply voltage range: 3.13 - 3.63VEtherCAT ® node6 x CAN nodesEthernetMAC, USB-OTG, SD/MMC6 channel USIC (configurable to SPI, UART, IIC, IIS)External Bus Unit4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion2 channel 12bit DAC4 channel ΔΣ Demodulator24 x 16-bit special purpose timers, dead time generation2 x Position InterfaceWatch Dog Timer, Real Time ClockXMC4000 Functional Safety PackagePackage: LQFP144Temperature range:-40 - 125°CSDIO/SD/MMC InterfaceARM ® Cortex ®-M4 @ 144MHz2048kB Flash, 352kB RAMData and IP Protection on FlashSupply voltage range: 3.13 - 3.63VEtherCAT ® node6 x CAN nodesEthernetMAC, USB-OTG, SD/MMC6 channel USIC (configurable to SPI, UART, IIC, IIS)External Bus Unit4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion2 channel 12bit DAC4 channel ΔΣ Demodulator24 x 16-bit special purpose timers, dead time generation2 x Position InterfaceWatch Dog Timer, Real Time ClockXMC4000 Functional Safety PackagePackage: LQFP144Temperature range:-40 - 125°CSDIO/SD/MMC Interface	OTHER	In Stock	New Sealed Under Guarantee
XMC4700F144K2048AA	The XMC4700 device is a member of the XMC4000 family of microcontrollers based on the ARM Cortex-M4 processor core. The growing complexity of today's energy efficient embedded control applications are demanding microcontroller solutions with higher performance CPU cores featuring DSP and FPU capabilities. The XMC4700 family of microcontrollers take advantage of Infineon's decades of experience in the industrial market to provide an optimized solution to meet the performance challenges of today's embedded control applications. Summary of Features:ARM ® Cortex ®-M4 @ 144MHz2048kB Flash, 352kB RAMData and IP Protection on FlashSupply voltage range: 3.13 - 3.63V6 x CAN nodesEthernetMAC, USB-OTG, SD/MMC6 channel USIC (configurable to SPI, UART, IIC, IIS)External Bus Unit4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion2 channel 12bit DAC4 channel ΔΣ Demodulator24 x 16-bit special purpose timers, dead time generation2 x Position InterfaceWatch Dog Timer, Real Time ClockXMC4000 Functional Safety PackagePackage: LQFP144Temperature range: -40 - 125°CSafety package supporting SIL-2/3	OTHER	In Stock	New Sealed Under Guarantee
XMC4500F144K1024AC	XMC4500 combines Infineon's leading-edge peripheral set with an industry-standard ARM® Cortex®-M4 core resulting in a power pack for energy-efficient industrial applications.XMC4500 controllers feature a configurable peripheral set that allow to tailor the device to specific application needs. To capitalize fully on this flexibility, Infineon offers an industry-proven development environment DAVE™ that greatly eases SW development. DAVE™ 3 hosts a graphical user interface, low-level drivers, application libraries, an auto code generation engine and interfaces to generic or customer-selected development tools. Summary of Features:ARM® Cortex®-M4, 120MHz, incl. single cycle DSP MAC and floating point unit (FPU)IEEE 1588 compliant Ethernet MACUSB 2.0 full-speed on-the-goCPU Frequency: 120MHzeFlash: 1,024kB including hardware ECC160kB SRAMPackage: PG-LQFP-144USIC 6ch [Quad SPI, SCI/UART, I²C, I²S, LIN]3x CAN, 64 MO4x ΔΣ-DemodulatorSupply voltage range: 3.13 - 3.63VLong-term availability with >15 yearsTemperature range: -40°......125°	OTHER	In Stock	New Sealed Under Guarantee
XMC4400F64K512BA	XMC4400 combines Infineon's leading-edge peripheral set with an industry-standard ARM® Cortex™-M4. As one of its key features it offers a high-resolution PWM unit with a tiny resolution of 150ps. This unique peripheral makes it especially suitable for digital power conversion in applications like solar inverters as well as SMPS and uninterruptible power supplies (UPS). Other applications are motor controllers, sense&control and IO devices for factory automation and user interface systems (HMI). XMC4400 is supported by Infineon's integrated development platform DAVE™ 3, which makes convenient, fast and application-orientated software development possible. Summary of Features:ARM® Cortex™-M4, 120MHz, incl. single cycle DSP MAC and floating point unit (FPU)8-channel DMA + dedicated DMAs for USB and EthernetSupply voltage range: 3.13 - 3.63VUSB 2.0 full-speed on-the-goCPU Frequency: 120MHzeFlash:512kB including hardware ECC80kB SRAMPackage: TQFP-644xΔΣ-DemodulatorTemperature range: -40°.....85°10/100 Ethernet MAC (/w IEEE 1588)2x CAN, 64 MOUSIC 4ch [Quad SPI, SCI/UART, I²C, I²S, LIN]	OTHER	In Stock	New Sealed Under Guarantee
XMC4200Q48K256BAXUMA1	The XMC4100/4200 series belongs to the XMC4000 family of industrial microcontrollers based on the ARM Cortex-M4 processor core. the XMC4100/4200 series of microcontrollers take advantage of Infineon's decades of experience in microcontroller design, providing an optimized solution to meet the performance challenges of today's embedded control applications. The XMC4100/4200 series devices combine the extended functionality and performance of the ARM Cortex-M4 core with powerful on-chip peripheral subsystems and on-chip memory units. Summary of Features:256KBFlash, 40 KB RamSupply voltage range: 3.13 - 3.63VUSIC 4ch [Quad SPI, SCI/UART, I²C, I²S, LIN]1x PWM Timers (CCU8), 16-64Bit 8ch + Dead-Time2x CAN, 64 MOPeripherals Clock: 80 [MHZ]Core frequency: 80 [MHZ]Motor Control Hall and Encoder InterfaceIndustrial ConnectivityPackage: VQFN-48Temperature range: -40°… 125°High Resolution PWM 150psLong Term Availability with >15 yearsFree DAVE™ IDE and DAVE Apps	OTHER	In Stock	New Sealed Under Guarantee
XMC1402T038X0128AAXUMA1	32-bit Microcontrollers with ARM® Cortex®-M0 with focus on low-cost embedded control applications. The XMC1400 series devices are optimized for motor control, power conversion and LED Lighting applications and Human-Machine Interface (HMI). Increasing complexity and demand for computing power of embedded control applications requires microcontrollers to have a significant CPU performance, integrated peripheral functionality and rapid development environment enabling short time-to market, without compromising cost efficiency. The performance of XMC1400 will be increased with 70% over existing XMC1000 due to the 48 [MHz] of the core frequency and the 2 Can nodes interfaces. Summary of Features:128KB Flash, 16KB RAMCore frequency: 48[MHz]Peripherals clock: 96 [MHZ]Supply voltage range: 1.8 - 5.5 V96MHz MATH co-processor for CORDIC & HW Divide8x 96MHz 16-bit special purpose timers, dead time generationHall Sensor & Encoder I/FLED brightness & color control module (BCCU)12 channel 12-bit ADC, 2 x parallel sampling2 channel USIC (configurable to SPI, UART, IIC, IIS)3 x comparatorsTemperature sensorPseudo random number generatorReal time clockWatch dog timerPG-TSSOP-38Temperature range: -40 - 105°C70%+ performance over existing XMC1000	OTHER	In Stock	New Sealed Under Guarantee
XMC1302T038X0064AB	32-bit Microcontrollers with ARM® Cortex®-M0 with focus on low-cost embedded control applications. XMC1000 is the number one choice for bringing traditional 32-bit designs to the next level, addressing a broad application spectrum from typical 32-bit applications up to digital power conversion and even field-oriented motor control. XMC1300 family can integrate all the control and analog interface functions required for sensor less Field Oriented Control (FOC), brushless (BLDC), brushed DC and PMSM motors.Summary of Features:64KB Flash, 16KB RAMSupply voltage range: 1.8 - 5.5VMATH co-processor for CORDIC & HW Divide8 x 16-bit special purpose timers, dead time generationHall Sensor & Encoder I/FLED brightness & color control module (BCCU)12 channel 12-bit ADC, 2 x parallel sampling2 channel USIC (configurable to SPI, UART, IIC, IIS)3 x ComparatorsPeripherals Clock: 64 [MHZ]Temperature SensorPseudo Random Number GereratorReal Time ClockWatch Dog TimerPG-TSSOP-38Temperature range: -40 - 105°CAnalog comparators with only 3 mv input offset voltage and a propagation delay of 30 ns	OTHER	In Stock	New Sealed Under Guarantee
XMC1202T016X0032AB	32-bit Microcontrollers with ARM® Cortex®-M0 with smart application oriented features. The XMC1200 series belongs to the XMC1000 Family of industrial microcontrollers based on the ARM Cortex-M0 processor core. The XMC1200 series devices are optimized for LED Lighting applications and Human-Machine interface (HMI). Increasing complexity and demand for computing power of embedded control applications requires microcontrollers to have a significant CPU performance, integrated peripheral functionality and rapid development environment enabling short time-to market, without compromising cost efficiency.Summary of Features:32KB Flash, 16KB RAMSupply voltage range 1.8 - 5.5 V4 x 16-bit timers10 channel 12-bit ADC, 2 x parallel sampling2 channel USIC (configurable to SPI, UART, IIC, IIS)LED brightness & color control module (BCCU)2 x ComparatorsCore frequency: 32[MHZ]Peripherals clock: 64[MHZ]Temperature SensorPseudo Random Number GereratorReal Time ClockWatch Dog TimerPG-TSSOP-16Temperature range: -40 - 105°C	OTHER	In Stock	New Sealed Under Guarantee
TLE9843-2QX	MOTIX™ TLE9843-2QX is a part of the TLE984x product family. The TLE984x product family integrates an Arm® Cortex® M0 microcontroller core along with relay drivers, high side switches, LIN transceiver and a power supply system that enables the device to operate at the vehicle battery level.The TLE984x family offers scalability in terms of Flash memory sizes ranging from 36kB to 64kB with pin-compatible devices. The TLE984x family was specifically designed to fit to a wide range of LIN-slave applications where a small package form factor and a minimum number of external components are essential, e.g. window lift. The TLE984x product family is offered in a leadless VQFN-48 package to save board space.Summary of Features:Arm® Cortex® M0 MCUSystem clock up to 40MHz52kB Flash memory, including 4K EEPROM emulation4KB RAM2 High-Side & 2 Low-Side Switches with PWM capability5V power supply outputIntegrated LIN transceiver compatible with LIN standard 2.2 and SAE J2602-supports fast programming via LIN8-bit ADC with 7 channels for Voltage and Temperature supervision10-bit ADC with 13 channels (6 Analog Inputs, 5 HV Monitor inputs and battery sense)On chip oscillator & PLLPWM signal generator and 16 bit timers	OTHER	In Stock	New Sealed Under Guarantee
Sensors
TLV493D-A1B6	The Infineon TLV493D-A1B6 magnetic sensor offers accurate three dimensional sensing with extremely low power consumption in a small 6-pin package. With an opportunity to detect the magnetic field in x, y, and z-direction the sensor is ideally suited for the measurement of 3D movements, linear movements and rotation movements. It is usable in any kind of industrial and consumer applications that require a low power consumption.Summary of Features:Integrated temperature sensingLow current consumption0.007 µA in power down mode10 µA in ultra low power mode2.7 to 3.5 V operating supply voltageDigital output via 2-wire standardI 2C interfaceBx, By and Bz linear field measurement up to ±130 mT12-bit data resolution for each measurement directionResolution 98 µT/LSBOperating temperature range from -40 °C to 125 °C	OTHER	In Stock	New Sealed Under Guarantee

Model

Description

Brand

Leading

Condition

Price

Action

MOSFETs

AOD2210

The PCA9306 is a dual bidirectional I2C-bus and SMBus voltage-level translator with an enable (EN) input, and is operational from 1.0 V to 3.6 V (Vref(1)) and 1.8 V to 5.5 V (Vbias(ref)(2)).The PCA9306 allows bidirectional voltage translations between 1.0 V and 5 V without the use of a direction pin. The low ON-state resistance (Ron) of the switch allows connections to be made with minimal propagation delay. When EN is HIGH, the translator switch is on, and the SCL1 and SDA1 I/O are connected to the SCL2 and SDA2 I/O, respectively, allowing bidirectional data flow between ports. When EN is LOW, the translator switch is off, and a high-impedance state exists between ports.The PCA9306 is not a bus buffer like the PCA9509 or PCA9517A that provide both level translation and physically isolate the capacitance to either side of the bus when both sides are connected. The PCA9306 only isolates both sides when the device is disabled and provides voltage level translation when active

OTHER

In Stock

New Sealed Under Guarantee

AOD2922

• Latest Trench Power AlphaMOS (αMOS MV) technology• Very Low RDS(ON)• Low Gate Charge• Optimized for fast-switching applications• RoHS and Halogen-Free Compliant Application • Synchronus Rectification in DC/DC and AC/DC Converters• Isolated DC/DC Converters in Telecom and Industrial

OTHER

In Stock

New Sealed Under Guarantee

IRF3205PBF

Advanced Process TechnologyUla Low On-ResistanceDynamic dv/dt Rating175°C Operating TemperatureFast SwitchingFully Avalanche RatedLead-Free Advanced HEXFET® Power MOSFETs from International Rectifier utilize advanced processing techniques to achieve exemely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET power MOSFETs are well known for, provides the designer with an exemely efficient and reliable device for use in a wide variety of applications.The TO-220 package is universally preferred for all commercial-indusial applications at power dissipation levels to approximately 50 watts. The low thermal resistance and low package cost of the TO-220 conibute to its wide acceptance throughout the indusy

OTHER

In Stock

New Sealed Under Guarantee

IRF630NPBF

Advanced Process TechnologyUla Low On-ResistanceDynamic dv/dt Rating175°C Operating TemperatureFast SwitchingFully Avalanche RatedLead-Free Fifth Generation HEXFET® Power MOSFETs from International Rectifier utilize advanced processing techniques to achieve exemely low on-resistance per silicon area. This benefit, combined with the fast witching speed and ruggedized device design that HEXFET Power MOSFETs are well known for, provides the designer with an exemely efficient and reliable device for use in a wide variety of applications. The TO-220 package is universally preferred for all commercial-indusial applications at power dissipation levels to approximately 50 watts. The low thermal resistance and low package cost of the TO-220 conibute to its wide acceptance throughout the indusy. The D2Pak is a surface mount power package capable of accommodating die sizes up to HEX-4. It provides the highest power capability and the lowest possible onresistance in any existing surface mount package. The D2Pak is suitable for high current applications because of its low internal connection resistance and can dissipate up to 2.0W in a typical surface mount application. The through-hole version (IRF640NL) is available for lowprofile application.

OTHER

In Stock

New Sealed Under Guarantee

IRF640NPBF

Advanced Process TechnologyUla Low On-ResistanceDynamic dv/dt Rating175°C Operating TemperatureFast SwitchingFully Avalanche RatedLead-Free Fifth Generation HEXFET® Power MOSFETs from International Rectifier utilize advanced processing techniques to achieve exemely low on-resistance per silicon area. This benefit, combined with the fast switching speed and ruggedized device design that HEXFET Power MOSFETs are well known for, provides the designer with an exemely efficient and reliable device for use in a wide variety of applications.The TO-220 package is universally preferred for all commercial-indusial applications at power dissipation levels to approximately 50 watts. The low thermal resistance and low package cost of the TO-220 conibute to its wide acceptance throughout the indusy.The D2Pak is a surface mount power package capable of accommodating die sizes up to HEX-4. It provides the highest power capability and the lowest possible onresistance in any existing surface mount package. The D2Pak is suitable for high current applications because of its low internal connection resistance and can dissipate up to 2.0W in a typical surface mount application.The through-hole version (IRF640NL) is available for lowprofile application.

OTHER

In Stock

New Sealed Under Guarantee

SPP04N50C3

Low specific on-state resistance (RDS(on)*A)Very low energy storage in output capacitance (Eoss) @400VLow gate charge (Qg)Fieldproven CoolMOS™ qualityCoolMOS™ technology has been manufactured by Infineon since 1998

OTHER

In Stock

New Sealed Under Guarantee

IRF7311PBF

Planar cell sucture for wide SOAOptimized for broadest availability from disibution partnersProduct qualification according to JEDEC standardSilicon optimized for applications switching below <100KHzIndusy standard surface-mount power packageCapable of being wave-soldered RoHS CompliantLow RDS(on)Dynamic dv/dt RatingFast SwitchingDual N-Channel MOSFET

OTHER

In Stock

New Sealed Under Guarantee

IRF7314PbF

OTHER

In Stock

New Sealed Under Guarantee

IRF7451PbF

Planar cell sucture for wide SOAOptimized for broadest availability from disibution partnersProduct qualification according to JEDEC standardSilicon optimized for applications switching below <100KHzIndusy standard surface-mount power packageCapable of being wave-soldered RoHS CompliantIndusy-leading qualityFully Characterized Avalanche Voltage and CurrentLow Gate-to-Drain Charge to Reduce Switching LossesFully Characterized Capacitance Including Effective Coss to Simplify Design

OTHER

In Stock

New Sealed Under Guarantee

IRF7494PBF

Optimized for broadest availability from distribution partnersProduct qualification according to JEDEC standardOptimized for 10 V gate-drive voltage (called normal level)Industry standard surface-mount power packageCapable of being wave-soldered

OTHER

In Stock

New Sealed Under Guarantee

IRF7811AVPBF

• N-Channel Application-Specific MOSFETs• Ideal for CPU Core DC-DC Converters• Low Conduction Losses• Low Switching Losses• Minimizes Parallel MOSFETs for high currentapplications• 100% RG Tested• Lead-Free This new device employs advanced HEXFET Power MOSFET technology to achieve an unprecedented balance of on-resistance and gate charge. The reduced conduction and switching losses make it ideal for high efficiency DC-DC converters that power the latest generation of microprocessors. The IRF7811AV has been optimized for all parameters that are critical in synchronous buck converters including RDS(on), gate charge and Cdv/dt-induced turn-on immunity.The IRF7811AV offers an extremely low combination of Qsw & RDS(on) for reduced losses in both control and synchronous FET applications. The package is designed for vapor phase, infra-red, convection, or wave soldering techniques. Power dissipation of greater than 2W is possible in a typical PCB mount application.

OTHER

In Stock

New Sealed Under Guarantee

IRF7821PBF

RoHS CompliantIndustry-leading qualityLow RDS(ON) at 4.5V VGSFully Characterized Avalanche Voltage and CurrentUltra-Low Gate Impedance

OTHER

In Stock

New Sealed Under Guarantee

IRF7832PBF

RoHS CompliantIndustry-leading qualityLow RDS(ON) at 4.5V VGSFully Characterized Avalanche Voltage and CurrentUltra-Low Gate Impedance Synchronous MOSFET for Notebook Processor Power Synchronous Rectifier MOSFET forIsolated DC-DC Converters inNetworking Systems Lead-Free

OTHER

In Stock

New Sealed Under Guarantee

IRF7910PBF

High Frequency 3.3V and 5V input Point- of-Load Synchronous Buck Converters for Netcom and Computing ApplicationsPower Management for Netcom, Computing and Portable Applications Lead-Free Ultra-Low Gate Impedance Very Low RDS(on) Fully Characterized Avalanche Voltage and Current

OTHER

In Stock

New Sealed Under Guarantee

IRF830PBF

Optimized for broadest availability from distribution partnersOptimized for 4.5V gate-drive voltage(called Logic level), capable of being driven at 2.5V gate-drive voltage (called Super Logic level)Reduced design complexity in high-side configuration (vs N-channel device)Easier interface to Microcontroller (vs N-channel device)

OTHER

In Stock

New Sealed Under Guarantee

IRF9321PBF

OTHER

In Stock

New Sealed Under Guarantee

IRF9530NPBF

The IR MOSFET family of power MOSFETs utilizes proven silicon processes offering designers a wide portfolio of devices to support various applications such as DC motors, inverters, SMPS, lighting, load switches as well as battery powered applications.The devices are available in a variety of surface mount and through-hole packages with industry standard footprints for ease of design. Planar cell structure for wide SOAOptimized for broadest availability from distribution partnersProduct qualification according to JEDEC standardSilicon optimized for applications switching below <100kHzIndustry standard through-hole power packageHigh-current rating

OTHER

In Stock

New Sealed Under Guarantee

IRF9Z34NPBF

OTHER

In Stock

New Sealed Under Guarantee

IRFB3077PBF

The IR MOSFET™ family of power MOSFETs utilizes proven silicon processes offering designers a wide portfolio of devices to support various applications such as DC motors, inverters, SMPS, lighting, load switches as well as battery powered applications. The devices are available in a variety of surface mount and through-hole packages with industry standard footprints for ease of design. The optimized gate drive options enables designers the flexibility of selecting super, logic or normal level drives. Optimized for broadest availability from distribution partnersProduct qualification according to JEDEC standardIndustry standard through-hole power packageHigh-current carrying capability packageApplicationsHigh Efficiency Synchronous Rectification in SMPSUninterruptible Power SupplyHigh Speed Power SwitchingHard Switched and High Frequency Circuits

OTHER

In Stock

New Sealed Under Guarantee

IRFP150MPBF

OTHER

In Stock

New Sealed Under Guarantee

IGBTs

IRG4BC20UPBF

Potential Applications:Air ConditionerDishwasherFanPFCPumpWashing Machine

OTHER

In Stock

New Sealed Under Guarantee

KA9238HA1(sleeve)

KA9238HA1(sleeve) Kaku KAKU AC axial flow sleeve FAN 92*92*38mm ,AC/DC AC,Size(MM) 92*92*38,Bearing Sleeve ,Voltage(V) 110/120,Frequency(Hz) 50/60,Current(A) 0.1/0.08,Power(W) 20/18,Speed(RPM) 2700/3200,Max Air Flow(CFM) 18/22,Max Static Pressure(Inch-H2O) 0.12/0.15,Noise(dB) 30/32,Weight(g) 210

OTHER

In Stock

New Sealed Under Guarantee

Transistors & Diodes

BC847BW

• For AF input stages and driver applications• High current gain• Low collector-emitter saturation voltage• Low noise between 30 Hz and 15 kHz• Complementary types: BC857...-BC860...(PNP)• Pb-free (RoHS compliant) package• Qualified according AEC Q1011) Potential Applications:For AF input stages and driver applications

Diodes

In Stock

New Sealed Under Guarantee

BCR141W

• Switching circuit, inverter, interface circuit, driver circuit• Built in bias resistor (R1=22kΩ, R2=22kΩ)• BCR141S : Two internally isolated transistors with good matching in one multichip package• BCR141S: For orientation in reel see package information below• Pb-free (RoHS compliant) package• Qualified according AEC Q101

OTHER

In Stock

New Sealed Under Guarantee

SMBT2907A

Low collector-emitter saturation voltage Complementary type: SMBT2222A / MMBT2222A (NPN) Pb-free (RoHS compliant) package Qualified according AEC Q101

OTHER

In Stock

New Sealed Under Guarantee

Power management

ICE2PCS01G

ICE2PCS0x/G are the 2nd generation of Continuous Conduction Mode (CCM) PFC controllers, which employ BiCMOS technology. Compared to the 1 st generation of ICE1PCS01/02, the new ICs have lower internal reference trimmed at 3V. They also have other advantages such as wider Vcc operating range, improved internal oscillator and additional direct bulk capacitor over-voltage protection. 8 pins CCM PFC simpilfy the design procedures.Build-in protection features save system BOM cost and enhance system safety.

OTHER

In Stock

New Sealed Under Guarantee

IKA15N60T

Hard-switching 600 V, 15 A TRENCHSTOP™ IGBT3 Discrete copacked with full-rated external free-wheeling diode in a TO-220 Full-Pak package, leads to significant improvement of static as well as dynamic performance of the device, due to the combination of trench-cell and fieldstop concept. The combination of IGBT with soft recovery emitter controlled diode further minimizes the turn-on losses. The highest efficiency is reached due to the best compromise between switching and conduction losses.

OTHER

In Stock

New Sealed Under Guarantee

IKW40N120H3

High speed 1200 V, 40 A hard-switching TRENCHSTOP™ IGBT4 co-packed with free-wheeling diode in a TO-247 package provides the best compromise between switching and conduction losses. The key feature of this family is a MOSFET-like turn-off switching behavior, leading to low turn off losses. Low switching and conduction lossesVery good EMI behaviorCan be used with a small gate resistor for reduced delay time and voltage overshootHigh current densityBest-in-class 1200 V IGBT efficiency and EMI behavior

OTHER

In Stock

New Sealed Under Guarantee

IPP200N15N3 G

The 150V OptiMOS™ achieves a reduction in R DS(on) of 40% and of 45% in figure of merit (FOM) compared to the next best competitor. This drastic improvement opens new possibilities like moving from leaded packages to SMD packages or effectively replacing two old parts with one OptiMOS™ part. • N-channel, normal level• Excellent gate charge x R DS(on) product (FOM)• Very low on-resistance R DS(on)• 175 °C operating temperature• Pb-free lead plating; RoHS compliant• Qualified according to JEDEC1) for target application• Ideal for high-frequency switching and synchronous rectification• Halogen-free according to IEC61249-2-21

OTHER

In Stock

New Sealed Under Guarantee

XDPE12284C-0000

The XDP™ XDPE12284C is a digital dual-rail 8-phase controller that provides power for Intel VR13, VR13HC, IMVP8 and IMVP9 server, workstation, and high-end desktop applications. The controller offers flexible phase assignment between the two loops and can be configured in any of the following ways: 8+0, 7+1, ... ,4+4.The XDPE12284C controller utilizes digital technology to implement all control functions, providing the ultimate system solution in terms of flexibility and stability. Advanced control loop features, such as Active Transient Response (ATR) modulation and fast DVID response enable optimal response to high slew rate load transients. Programmable temperature compensation to current sense allows the designer to tailor the response for best load line accuracy over temperature.XDPE12284C also supports integrated power stages that provides integrated current sense and integrated temperature sense information.Summary of Features:Compliant with Intel VR13, VR13HC rev 1.3, IMVP8 rev 1.2 and IMVP9 rev 1.3 specificationsCompliant with Intel SVID rev 1.9.1 protocolCompliant with PMBus rev 1.3 compliant serial interfaceOutput voltage regulation range: 0.2 V to 3.04 VFlexible phase assignment between the two loops: 8+0, 7+1, … ,4+4 phasesNon-linear control for superior transient responseDigitally programmable loadlineDigital temperature compensation

OTHER

In Stock

New Sealed Under Guarantee

TLS850F1TAV50

With an input voltage range of 3 V to 40 V and very low quiescent of only 40 μA, these regulators are perfectly suitable for automotive or any other supply systems connected to the battery permanently. The TLS850F1TAV50 provides an output voltage accuracy of 2 % and a maximum output current up to 500 mA. The new loop concept combines fast regulation and very good stability while requiring only one small ceramic capacitor of 1 μF at the output. At currents below 100 mA the device will have a very low typical dropout voltage of only 70 mV. The operating range starts already at input voltages of only 3 V (extended operating range). This makes the TLS850F1TAV50 also suitable to supply automotive systems that need to operate during cranking condition.Summary of Features:Wide Input Voltage Range from 3.0 V to 40 VFixed Output Voltage 5 VOutput Voltage Precision ≤ ± 2 %Output Current Capability up to 500 mAUltra Low Current Consumption typ. 40 µAVery Low Dropout Voltage typ. 70 mV@100 mAStable with Ceramic Output Capacitor of 1 µFDelayed Reset at Power-On: 8.5 msAdjustable Reset Threshold down to 2.50 VFast Watchdog timing with fixed 48 ms window and current dependent deactivationActivated at IQ > 5.5 mAEnable, Undervoltage Reset, Overtemperature ShutdownOutput Current LimitationWide Temperature RangeGreen Product (RoHS compliant)AEC Qualified

OTHER

In Stock

New Sealed Under Guarantee

TLS820F1ELV50

With an input voltage range of 3 V to 40 V and very low quiescent of only 40 μA, these regulators are perfectly suitable for automotive or any other supply systems connected to the battery permanently. The TLS820F1ELV50 provides an output voltage accuracy of 2 % and a maximum output current up to 200 mA. The new loop concept combines fast regulation and very good stability while requiring only one small ceramic capacitor of 1 μF at the output. At currents below 100 mA the device will have a very low typical dropout voltage of only 70 mV. The operating range starts already at input voltages of only 3 V (extended operating range). This makes the TLS820F1ELV50 also suitable to supply automotive systems that need to operate during cranking condition. In addition, a Watchdog circuit with flexible timings is integrated to monitor the microcontroller‘s operation. Internal protection features like output current limitation and overtemperature shutdown are implemented to protect the device against immediate damage due to failures like output short circuit to GND, over-current and over-temperatures.Summary of Features:Wide Input Voltage Range from 3.0 V to 40 VFixed Output Voltage 5 VOutput Voltage Precision = ± 2 %Output Current Capability up to 200 mAUltra Low Current Consumption typ. 40 µAVery Low Dropout Voltage typ. 70 mV@100 mAStable with Ceramic Output Capacitor of 1 µFAdjustable Reset Threshold down to 2.50 VFlexible Watchdog and Reset timing with selectable windowEnable, Undervoltage Reset,Overtemperature ShutdownOutput Current LimitationWide Temperature Range up-to 150°CGreen Product (RoHS compliant)AEC Qualified

OTHER

In Stock

New Sealed Under Guarantee

TLS810B1EJV50

With an input voltage range of 2.75 V to 42 V and ultra low quiescent of only 5.5 μA, the regulator is perfectly suitable for automotive or any other supply systems connected permanently to the battery. The TLS810B1xxV50 is the fixed 5 V output version with an accuracy of 2% and output current capability up to 100 mA. The new regulation concept implemented in TLS810B1 combines fast regulation and very good stability while requiring only a small ceramic capacitor of 1 μF at the output. The tracking region starts already at input voltages of 2.75 V (extended operating range). This makes the TLS810B1 also suitable to supply automotive systems that need to operate during cranking condition. Internal protection features like output current limitation and overtemperature shutdown are implemented to protect the device against immediate damage due to failures like output short circuit to GND, over-current and over-temperature. The device can be switched on and off by the Enable feature. When the device is switched off, the current consumption is typically less than 1 μA.Summary of Features:Ultra Low Quiescent Current of 5.5 μAWide Input Voltage Range of 2.75 V to 42 VOutput Current Capacity up to 100 mAOff Mode Current Less than 1 μALow Drop Out Voltage of typ. 200mV @ 100 mAOutput Current Limit ProtectionOvertemperature ShutdownEnableAvailable in PG-DSO-8 EP PackageAvailable in PG-TSON-10 PackageWide Temperature RangeGreen Product (RoHS Compliant)AEC Qualified

OTHER

In Stock

New Sealed Under Guarantee

TLS115B0LD

The IC is designed to supply off-board systems, for example sensors in powertrain management systems under the severe conditions of automotive applications. Therefore, the IC is equipped with additional protection functions against reverse polarity and short circuit to GND and battery. With supply voltages up to 45 V, the output voltage follows the reference voltage applied at the adjust input with very high accuracy. The reference voltage applied to the adjust input can be down to 2.0 V and is able to drive loads up to 150 mA while the device follows the reference voltage (e.g. the 5 V output of a main voltage regulator) with very high precision.Summary of Features:150mA current capacityVery tight output tracking tolerance to referenceOutput voltage adjustable down to 2.0 VStable with ceramic output capacitorsVery low dropout voltageVery low current consumption in OFF modeInternally controlled soft start

OTHER

In Stock

New Sealed Under Guarantee

TLF35584QVVS2

The wide switching frequency range allows optimization in respect of efficiency and usage of small filter components. A dedicated reference-regulator supplies the ADC independent from μC-load steps and acts as tracking-source for the 2 independent sensor-supplies. The flexible state machine, wake-up concept including timer, and the stand-by-regulator favors the usage in numerous applications.Multiple safety features enable easy realization of ASIL-D together with various Microcontrollers (μCs). The TLF35584 is coming in small, thermally enhanced VQFN-48 (QV-version) capable for automated optical inspection.

OTHER

In Stock

New Sealed Under Guarantee

TLF35584QKVS1

The wide switching frequency range allows optimization in respect of efficiency and usage of small filter components. A dedicated reference-regulator supplies the ADC independent from μC-load steps and acts as tracking-source for the 2 independent sensor-supplies. The flexible state machine, wake-up concept including timer, and the stand-by-regulator favors the usage in numerous applications.Multiple safety features enable easy realization of ASIL-D together with various Microcontrollers (μCs). The TLF35584 is coming in a thermally enhanced LQFP-64 (QK-version) capable for automated optical inspection.

OTHER

In Stock

New Sealed Under Guarantee

TLF35584QKVS2

The wide switching frequency range allows optimization in respect of efficiency and usage of small filter components. A dedicated reference-regulator supplies the ADC independent from μC-load steps and acts as tracking-source for the 2 independent sensor-supplies. The flexible state machine, wake-up concept including timer, and the stand-by-regulator favors the usage in numerous applications.Multiple safety features enable easy realization of ASIL-D together with various Microcontrollers (μCs). The TLF35584 is coming in a thermally enhanced LQFP-64 (QK-version) capable for automated optical inspection.

OTHER

In Stock

New Sealed Under Guarantee

TLD5190QV

This concept of a synchronous and seamless buck-boost regulation provides a very efficient solution for circuits where the output (load) voltage is on the same level as the input voltage, e.g. in short chains with 2 to 3 high power LEDs or laser diodes connected to a 12 V electrical system.Thanks to the flexibility to be used in current and in voltage mode it is also a perfect device for powering non LED applications like USB and mobile wireless charger or as multipurpose pre-regulation like for infotainment.As it comes without SPI it is also ideal for all application where a basic feature set is sufficient or where a Microcontroller is not used.Summary of Features:MOSFET H-Bridge with Single Inductor DC-DC Controller for high power BUCK-BOOST LED controlConstant Current and Constant Voltage RegulationWide VIN Range (Device 4.5V to 40V, Power Stage 4.5V to 55V)Wide LED forward voltage Range (2V up to 55V)LED current accuracy+/-3% at Tj=25° and 4% over the whole automotive temperature rangeSwitching Frequency Range from 200 kHz to 700 kHzMaximum Efficiency in every condition (up to 96%)Flexible current sense (Highside or Lowside)EMC optimized device: Features an auto Spread Spectrum concept to ensure best in class EMC performanceOpen Load, Overvoltages, Shorted LED fault and Overtemperature Diagnostic OutputsLED and Input current sense with dedicated monitor OutputsSmart power protection features for device and load (open load, short of Load, Overtemperature)Capability to supply Gate Drivers via external Voltage RegulatorAdjustable Soft StartEnhanced Dimming features to adjust average LED current and PWM dimmingAvailable in a small thermally enhanced VQFN-48-31 packageAutomotive AEC Qualified

OTHER

In Stock

New Sealed Under Guarantee

1EBN1001AE

IGBT / MOSFET gate driver booster for automotive motor drives above 10 kW, peak current up to ±15 A, support for active clamping with very fast reaction time, active clamping disable and ASC Input signals.Summary of Features:Single Channel IGBT / MOSFET Gate Driver BoosterSuitable for IGBT classes up to 650 V / 800A and 1200 V / 400ALow propagation delay and minimal PWM distortionSeparate turn-on and turn-off signals pathesSupport for negative turn-off bias14-pin PG-DSO-14 exposed pad green packageAEC-Q100 qualified

OTHER

In Stock

New Sealed Under Guarantee

1ED020I12FA2

Summary of Features:Coreless transformer isolated driverBasic insulation according to DIN EN 60747-5-2, pendingIntegrated protection featuresSuitable for operation at high ambient temperatureAutomotive Qualified2A rail-to-rail outputV(cesat)-detectionActive Miller Clamp

OTHER

In Stock

New Sealed Under Guarantee

1ED020I12-FT

1ED020I12-FT is a galvanic isolated single channel gate driver in DSO-16 wide body package that provides an output current capability of typically 2 A. All logic pins are 5V CMOS compatible and could be directly connected to a microcontroller. The data transfer across galvanic isolation is realized by the integrated Coreless Transformer Technology. The 1ED-FT provides several protection features like IGBT desaturation protection, active Miller clamping, active shut down and two level turn off.Summary of Features:Single channel isolated gate driver IC (1ED-FT)For 600 V/1200 V IGBTs, MOSFETs, SiC MOSFETs, discrete and modules2 A rail-to-rail typical output currentPrecise DESAT protection, VCEsat detectionActive Miller Clamp, two level turn off (TLTOff)Active shutdown and Short circuit clamping28 V absolute Max. output supply voltage200/230 ns Max. propagation delay12/11 V output UVLO≥ 50 kV/µs CMTI

OTHER

In Stock

New Sealed Under Guarantee

1EDI20H12AH

EiceDRIVER™ 1200 V high side gate driver IC with typical 4.0 A source and 3.5 A sink in a wide-body DSO-8 package with CT technology for IGBT Modules.For higher isolation rating, higher current, shorter propagation delay, check out our newly released X3 Compact family, 1ED3120MU12H. The DSO-8 150mil narrow body version with great price performance ratio is also available: 1EDI20N12AF.Summary of Features:1200V coreless Transformer isolated Driver ICs2 A rail-to-rail outputs300 mil wide-body package for 8 mm creepage distanceSeparate source/sink outputsApplications:Brushless DC motor (BLDC) - controller and driverIndustrial heating and weldingSmart induction cooktop – precise heating controlSolutions for solar energy systemsUninterruptible Power Supply (UPS)

OTHER

In Stock

New Sealed Under Guarantee

1EDI20N12AF

EiceDRIVER™ Compact 1200 V single-channel isolated gate driver with 3.5/4 A typical sinking and sourcing peak output current in DSO-8 narrow package with 4 mm creepage distance for MOSFETs.1EDI20N12AF belongs to the EiceDRIVER™ 1ED Compact 150mil family (1ED-AF family). 1EDI20IN12AF offers separate sink and source output, 40 ns input filter, accurate and stable timing. The driver can operate over a wide supply voltage range, either unipolar or bipolar.Summary of Features:EiceDRIVER™ Compact single channel isolated gate driver familyFor 600 V, 650 V, 950 V MOSFETsGalvanically isolated coreless transformer gate driver4 A typical sinking and sourcing peak output current40 V absolute maximum output supply voltage120 ns propagation delay with 40 ns input filterHigh common-mode transient immunity CMTI >100 kV/μsSeparate source and sink outputsShort-circuit clamping and active shutdownDSO-8 150 mil narrow-body package with 4 mm creepage distance8 V/10 V undervoltage lockout (UVLO) protection with hysteresis

OTHER

In Stock

New Sealed Under Guarantee

1EDI60H12AH

EiceDRIVER™ 1200 V high side gate driver IC with typical typical 10.0 A source and 9.4 A sink currents in DSO-8 package for IGBT.For higher isolation rating, higher current, shorter propagation delay, check out our newly released X3 Compact family, 1ED3124MU12H. The DSO-8 150 mil narrow body version with great price performance ratio is also available: 1EDI60N12AF.Summary of Features:1200V coreless Transformer isolated Driver ICs6 A rail-to-rail outputs300 mil wide-body package for 8 mm creepage distanceSeparate source/sink outputsApplicationsMotor control and drivesPower Management (SMPS) - Reference DesignSolutions for solar energy systems

OTHER

In Stock

New Sealed Under Guarantee

1EDN7511B

1-channel MOSFET gate driver ICs are the crucial link between control ICs and powerful MOSFET and GaN switching devices. Gate driver ICs enable high system level efficiencies, excellent power density and consistent system robustness.1EDN family: Fast, precise, strong and compatibleHighly efficient SMPS enabled by 5 ns short slew rates and ±5ns propagation delay precision for fast MOSFET and GaN switching Separate source and sink outputs simplify the application design Industry standard packages and pinout ease system design upgrades.Summary of Features:1EDN family: The new reference in ruggedness and low power dissipation-10V robustness of control and enable inputs provides crucial safety margin when driving pulse transformers5A reverse output current robustness eliminates the need for Schottky switching diodes when driving MOSFETs in TO-220 and TO-247 packagesCool driver ICs thanks to true rail-to-rail low impedance output stages4V and 8V UVLO (Under Voltage Lock Out) options for instant MOSFET protection during start-up and under abnormal conditionsPotential Applications:PFCSynchronous rectificationDC-DC convertersTelecom bricksPower toolsIndustrial SMPSMotor controlWireless charging

OTHER

In Stock

New Sealed Under Guarantee

Switchs

BTS141

Features: • Logic Level Input • Input Protection (ESD) •=Thermal shutdown with latch • Overload protection • Short circuit protection • Overvoltage protection • Current limitation • Status feedback with external input resistor • Analog driving possible • AEC qualified • Green product (RoHS compliant) Application: • All kinds of resistive, inductive and capacitive loads in switching or linear applications • μC compatible power switch for 12 V and 24 V DC applications • Replaces electromechanical relays and discrete circuits

OTHER

In Stock

New Sealed Under Guarantee

ITS4142N

High side power switch with integrated vertical power FET, providing embedded protection and diagnostic functions. Summary of Features:Short circuit protectionCurrent limitationOverload protectionOvervoltage protection (including load dump)Undervoltage shutdown with autorestart and hysteresisSwitching inductive loadsClamp of negative voltage at output with inductive loadsCMOS compatible inputThermal shutdown with restartESD - ProtectionLoss of GND and loss of Vbb protectionVery low standby currentReverse battery protection with external resistorImproved electromagnetic compatibility (EMC)

OTHER

In Stock

New Sealed Under Guarantee

Microcontroller

XMC4800F144K2048AA

The XMC4800 device is a member of the XMC4000 family of microcontrollers based on the ARM Cortex-M4 processor core. The growing complexity of today's energy efficient embedded control applications are demanding microcontroller solutions with higher performance CPU cores featuring DSP and FPU capabilities. The XMC4800 family of microcontrollers take advantage of Infineon's decades of experience in the industrial market to provide an optimized solution to meet the performance challenges of today's embedded control applications. First-ever EtherCAT ® node on an ARM ® Cortex ®-M microcontroller with on-chip flash and analog/mixed signal capabilities. Summary of Features: ARM ® Cortex ®-M4 @ 144MHz2048kB Flash, 352kB RAMData and IP Protection on FlashSupply voltage range: 3.13 - 3.63VEtherCAT ® node6 x CAN nodesEthernetMAC, USB-OTG, SD/MMC6 channel USIC (configurable to SPI, UART, IIC, IIS)External Bus Unit4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion2 channel 12bit DAC4 channel ∆Σ Demodulator24 x 16-bit special purpose timers, dead time generation2 x Position InterfaceWatch Dog Timer, Real Time ClockXMC4000 Functional Safety PackagePackage: LQFP144Temperature range:-40 - 125°CSDIO/SD/MMC InterfaceARM ® Cortex ®-M4 @ 144MHz2048kB Flash, 352kB RAMData and IP Protection on FlashSupply voltage range: 3.13 - 3.63VEtherCAT ® node6 x CAN nodesEthernetMAC, USB-OTG, SD/MMC6 channel USIC (configurable to SPI, UART, IIC, IIS)External Bus Unit4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion2 channel 12bit DAC4 channel △Σ Demodulator24 x 16-bit special purpose timers, dead time generation2 x Position InterfaceWatch Dog Timer, Real Time ClockXMC4000 Functional Safety PackagePackage: LQFP144Temperature range:-40 - 125°CSDIO/SD/MMC Interface

OTHER

In Stock

New Sealed Under Guarantee

XMC4800F100K1024AA

The XMC4800 device is a member of the XMC4000 family of microcontrollers based on the ARM Cortex-M4 processor core. The growing complexity of today's energy efficient embedded control applications are demanding microcontroller solutions with higher performance CPU cores featuring DSP and FPU capabilities. The XMC4800 family of microcontrollers take advantage of Infineon's decades of experience in the industrial market to provide an optimized solution to meet the performance challenges of today's embedded control applications. First-ever EtherCAT ® node on an ARM ® Cortex ®-M microcontroller with on-chip flash and analog/mixed signal capabilities. Summary of Features: ARM ® Cortex ®-M4 @ 144MHz2048kB Flash, 352kB RAMData and IP Protection on FlashSupply voltage range: 3.13 - 3.63VEtherCAT ® node6 x CAN nodesEthernetMAC, USB-OTG, SD/MMC6 channel USIC (configurable to SPI, UART, IIC, IIS)External Bus Unit4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion2 channel 12bit DAC4 channel ΔΣ Demodulator24 x 16-bit special purpose timers, dead time generation2 x Position InterfaceWatch Dog Timer, Real Time ClockXMC4000 Functional Safety PackagePackage: LQFP144Temperature range:-40 - 125°CSDIO/SD/MMC InterfaceARM ® Cortex ®-M4 @ 144MHz2048kB Flash, 352kB RAMData and IP Protection on FlashSupply voltage range: 3.13 - 3.63VEtherCAT ® node6 x CAN nodesEthernetMAC, USB-OTG, SD/MMC6 channel USIC (configurable to SPI, UART, IIC, IIS)External Bus Unit4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion2 channel 12bit DAC4 channel ΔΣ Demodulator24 x 16-bit special purpose timers, dead time generation2 x Position InterfaceWatch Dog Timer, Real Time ClockXMC4000 Functional Safety PackagePackage: LQFP144Temperature range:-40 - 125°CSDIO/SD/MMC Interface

OTHER

In Stock

New Sealed Under Guarantee

XMC4700F144K2048AA

The XMC4700 device is a member of the XMC4000 family of microcontrollers based on the ARM Cortex-M4 processor core. The growing complexity of today's energy efficient embedded control applications are demanding microcontroller solutions with higher performance CPU cores featuring DSP and FPU capabilities. The XMC4700 family of microcontrollers take advantage of Infineon's decades of experience in the industrial market to provide an optimized solution to meet the performance challenges of today's embedded control applications. Summary of Features:ARM ® Cortex ®-M4 @ 144MHz2048kB Flash, 352kB RAMData and IP Protection on FlashSupply voltage range: 3.13 - 3.63V6 x CAN nodesEthernetMAC, USB-OTG, SD/MMC6 channel USIC (configurable to SPI, UART, IIC, IIS)External Bus Unit4 x 12-bit ADC, 26 input channels, 4 x parallel sampling and conversion2 channel 12bit DAC4 channel ΔΣ Demodulator24 x 16-bit special purpose timers, dead time generation2 x Position InterfaceWatch Dog Timer, Real Time ClockXMC4000 Functional Safety PackagePackage: LQFP144Temperature range: -40 - 125°CSafety package supporting SIL-2/3

OTHER

In Stock

New Sealed Under Guarantee

XMC4500F144K1024AC

XMC4500 combines Infineon's leading-edge peripheral set with an industry-standard ARM® Cortex®-M4 core resulting in a power pack for energy-efficient industrial applications.XMC4500 controllers feature a configurable peripheral set that allow to tailor the device to specific application needs. To capitalize fully on this flexibility, Infineon offers an industry-proven development environment DAVE™ that greatly eases SW development. DAVE™ 3 hosts a graphical user interface, low-level drivers, application libraries, an auto code generation engine and interfaces to generic or customer-selected development tools. Summary of Features:ARM® Cortex®-M4, 120MHz, incl. single cycle DSP MAC and floating point unit (FPU)IEEE 1588 compliant Ethernet MACUSB 2.0 full-speed on-the-goCPU Frequency: 120MHzeFlash: 1,024kB including hardware ECC160kB SRAMPackage: PG-LQFP-144USIC 6ch [Quad SPI, SCI/UART, I²C, I²S, LIN]3x CAN, 64 MO4x ΔΣ-DemodulatorSupply voltage range: 3.13 - 3.63VLong-term availability with >15 yearsTemperature range: -40°......125°

OTHER

In Stock

New Sealed Under Guarantee

XMC4400F64K512BA

XMC4400 combines Infineon's leading-edge peripheral set with an industry-standard ARM® Cortex™-M4. As one of its key features it offers a high-resolution PWM unit with a tiny resolution of 150ps. This unique peripheral makes it especially suitable for digital power conversion in applications like solar inverters as well as SMPS and uninterruptible power supplies (UPS). Other applications are motor controllers, sense&control and IO devices for factory automation and user interface systems (HMI). XMC4400 is supported by Infineon's integrated development platform DAVE™ 3, which makes convenient, fast and application-orientated software development possible. Summary of Features:ARM® Cortex™-M4, 120MHz, incl. single cycle DSP MAC and floating point unit (FPU)8-channel DMA + dedicated DMAs for USB and EthernetSupply voltage range: 3.13 - 3.63VUSB 2.0 full-speed on-the-goCPU Frequency: 120MHzeFlash:512kB including hardware ECC80kB SRAMPackage: TQFP-644xΔΣ-DemodulatorTemperature range: -40°.....85°10/100 Ethernet MAC (/w IEEE 1588)2x CAN, 64 MOUSIC 4ch [Quad SPI, SCI/UART, I²C, I²S, LIN]

OTHER

In Stock

New Sealed Under Guarantee

XMC4200Q48K256BAXUMA1

The XMC4100/4200 series belongs to the XMC4000 family of industrial microcontrollers based on the ARM Cortex-M4 processor core. the XMC4100/4200 series of microcontrollers take advantage of Infineon's decades of experience in microcontroller design, providing an optimized solution to meet the performance challenges of today's embedded control applications. The XMC4100/4200 series devices combine the extended functionality and performance of the ARM Cortex-M4 core with powerful on-chip peripheral subsystems and on-chip memory units. Summary of Features:256KBFlash, 40 KB RamSupply voltage range: 3.13 - 3.63VUSIC 4ch [Quad SPI, SCI/UART, I²C, I²S, LIN]1x PWM Timers (CCU8), 16-64Bit 8ch + Dead-Time2x CAN, 64 MOPeripherals Clock: 80 [MHZ]Core frequency: 80 [MHZ]Motor Control Hall and Encoder InterfaceIndustrial ConnectivityPackage: VQFN-48Temperature range: -40°… 125°High Resolution PWM 150psLong Term Availability with >15 yearsFree DAVE™ IDE and DAVE Apps

OTHER

In Stock

New Sealed Under Guarantee

XMC1402T038X0128AAXUMA1

32-bit Microcontrollers with ARM® Cortex®-M0 with focus on low-cost embedded control applications. The XMC1400 series devices are optimized for motor control, power conversion and LED Lighting applications and Human-Machine Interface (HMI). Increasing complexity and demand for computing power of embedded control applications requires microcontrollers to have a significant CPU performance, integrated peripheral functionality and rapid development environment enabling short time-to market, without compromising cost efficiency. The performance of XMC1400 will be increased with 70% over existing XMC1000 due to the 48 [MHz] of the core frequency and the 2 Can nodes interfaces. Summary of Features:128KB Flash, 16KB RAMCore frequency: 48[MHz]Peripherals clock: 96 [MHZ]Supply voltage range: 1.8 - 5.5 V96MHz MATH co-processor for CORDIC & HW Divide8x 96MHz 16-bit special purpose timers, dead time generationHall Sensor & Encoder I/FLED brightness & color control module (BCCU)12 channel 12-bit ADC, 2 x parallel sampling2 channel USIC (configurable to SPI, UART, IIC, IIS)3 x comparatorsTemperature sensorPseudo random number generatorReal time clockWatch dog timerPG-TSSOP-38Temperature range: -40 - 105°C70%+ performance over existing XMC1000

OTHER

In Stock

New Sealed Under Guarantee

XMC1302T038X0064AB

32-bit Microcontrollers with ARM® Cortex®-M0 with focus on low-cost embedded control applications. XMC1000 is the number one choice for bringing traditional 32-bit designs to the next level, addressing a broad application spectrum from typical 32-bit applications up to digital power conversion and even field-oriented motor control. XMC1300 family can integrate all the control and analog interface functions required for sensor less Field Oriented Control (FOC), brushless (BLDC), brushed DC and PMSM motors.Summary of Features:64KB Flash, 16KB RAMSupply voltage range: 1.8 - 5.5VMATH co-processor for CORDIC & HW Divide8 x 16-bit special purpose timers, dead time generationHall Sensor & Encoder I/FLED brightness & color control module (BCCU)12 channel 12-bit ADC, 2 x parallel sampling2 channel USIC (configurable to SPI, UART, IIC, IIS)3 x ComparatorsPeripherals Clock: 64 [MHZ]Temperature SensorPseudo Random Number GereratorReal Time ClockWatch Dog TimerPG-TSSOP-38Temperature range: -40 - 105°CAnalog comparators with only 3 mv input offset voltage and a propagation delay of 30 ns

OTHER

In Stock

New Sealed Under Guarantee

XMC1202T016X0032AB

32-bit Microcontrollers with ARM® Cortex®-M0 with smart application oriented features. The XMC1200 series belongs to the XMC1000 Family of industrial microcontrollers based on the ARM Cortex-M0 processor core. The XMC1200 series devices are optimized for LED Lighting applications and Human-Machine interface (HMI). Increasing complexity and demand for computing power of embedded control applications requires microcontrollers to have a significant CPU performance, integrated peripheral functionality and rapid development environment enabling short time-to market, without compromising cost efficiency.Summary of Features:32KB Flash, 16KB RAMSupply voltage range 1.8 - 5.5 V4 x 16-bit timers10 channel 12-bit ADC, 2 x parallel sampling2 channel USIC (configurable to SPI, UART, IIC, IIS)LED brightness & color control module (BCCU)2 x ComparatorsCore frequency: 32[MHZ]Peripherals clock: 64[MHZ]Temperature SensorPseudo Random Number GereratorReal Time ClockWatch Dog TimerPG-TSSOP-16Temperature range: -40 - 105°C

OTHER

In Stock

New Sealed Under Guarantee

TLE9843-2QX

MOTIX™ TLE9843-2QX is a part of the TLE984x product family. The TLE984x product family integrates an Arm® Cortex® M0 microcontroller core along with relay drivers, high side switches, LIN transceiver and a power supply system that enables the device to operate at the vehicle battery level.The TLE984x family offers scalability in terms of Flash memory sizes ranging from 36kB to 64kB with pin-compatible devices. The TLE984x family was specifically designed to fit to a wide range of LIN-slave applications where a small package form factor and a minimum number of external components are essential, e.g. window lift. The TLE984x product family is offered in a leadless VQFN-48 package to save board space.Summary of Features:Arm® Cortex® M0 MCUSystem clock up to 40MHz52kB Flash memory, including 4K EEPROM emulation4KB RAM2 High-Side & 2 Low-Side Switches with PWM capability5V power supply outputIntegrated LIN transceiver compatible with LIN standard 2.2 and SAE J2602-supports fast programming via LIN8-bit ADC with 7 channels for Voltage and Temperature supervision10-bit ADC with 13 channels (6 Analog Inputs, 5 HV Monitor inputs and battery sense)On chip oscillator & PLLPWM signal generator and 16 bit timers

OTHER

In Stock

New Sealed Under Guarantee

Sensors

TLV493D-A1B6

The Infineon TLV493D-A1B6 magnetic sensor offers accurate three dimensional sensing with extremely low power consumption in a small 6-pin package. With an opportunity to detect the magnetic field in x, y, and z-direction the sensor is ideally suited for the measurement of 3D movements, linear movements and rotation movements. It is usable in any kind of industrial and consumer applications that require a low power consumption.Summary of Features:Integrated temperature sensingLow current consumption0.007 µA in power down mode10 µA in ultra low power mode2.7 to 3.5 V operating supply voltageDigital output via 2-wire standardI 2C interfaceBx, By and Bz linear field measurement up to ±130 mT12-bit data resolution for each measurement directionResolution 98 µT/LSBOperating temperature range from -40 °C to 125 °C

OTHER

In Stock

New Sealed Under Guarantee

Get To Know Us

Services

Support