All
      0
      Cart
      Realtek +

      • OTHER

      • Popular
      • Newest
      • Most reviews

      Realtek

      IC Chips1
      ModelDescriptionBrandLeadingConditionPriceAction
      IC Chips1
      RT8306E
      GENERAL DESCRIPTIONThe XRT83D10 is a fully integrated, single channel, Line Interface Unit (Transceiver) for 75 Ω or 120 Ω E1 (2.048 Mbps) and 100Ω DS1 (1.544 Mbps) applications. The LIU consists of a receiver with adaptive data slicer for accurate data and clock recovery and a transmitter which accepts dual-rail digital inputs for signal transmission to the line using a low- impedance differential line driver. The LIU also includes a crystal-less jitter attenuator for clock and data smoothing which, depending on system requirements, can be selected in either the transmit or receive path.FEATURES• Complete E1 (CEPT) and DS1 Line Interface Unit• Generates transmit output pulses that are compliant with the ITU-T G.703 Pulse Template for 2.048Mbps (E1) rates• On-Chip Pulse Shaping for both 75 Ω ,120 Ω and 100 Ω Line Drivers• Clock Recovery and Selectable Crystal-less Jitter attenuator• Compliant with ETS300166 Return Loss• Compliant with the ITU-T G.823 Jitter Tolerance Requirements• Remote, Local and Digital Loop backs• Declares and Clears LOS per ITU-T G.775• -40°C to 85°C Temperature Range• Low Power Dissipation• +5V or +3.3V Supply Operation• Pin Compatible with AGERE T7290A and T5290AAPPLICATIONS• PDH Multiplexers• SDH Multiplexers• Digital Cross-Connect Systems• DECT (Digital European Cordless Telephone) Base Stations• CSU/DSU Equipment
      		OTHERIn StockNew Sealed Under Guarantee
      RTD1073DD
      		OTHERIn StockNew Sealed Under Guarantee
      RTD1261PA-GR
      		OTHERIn StockNew Sealed Under Guarantee
      RTD2013B-LF
      		OTHERIn StockNew Sealed Under Guarantee
      RTD2045L
      		OTHERIn StockNew Sealed Under Guarantee
      RTD2136R-CG
      		OTHERIn StockNew Sealed Under Guarantee
      RTD2270S-GR
      FeaturesGeneral● Embedded DDC with DDC1/2B/CI● Embedded one MCU with SPI flash controller.● Require only one crystal to generate all timing.● Programmable internal low-voltage-reset (LVR)● High resolution 6 channels PWM output, and wide range selectable PWM frequency.● Support input format up to FHD● Embedded BJT control circuit for 1.2V regulator replacementAnalog RGB Input Interface● One Analog input supported● Integrated 8-bit triple-channel 210MHz ADC/PLL(option)● Embedded programmable Schmitt trigger of HSYNC● Support Sync-On-Green (SOG) and various kinds of composite sync modes● On-chip high-performance hybrid PLLs● High resolution true 64 phase ADC PLLEmbedded MCU● Industrial standard 8051 core with external serial flash● Low speed ADC for various application● I2C Master or Slave hardware supportedAuto Detection /Auto Calibration● Input format detection● Compatibility with standard VESA mode and support user-defined mode● Smart engine for Phase/Image position/Color calibrationScaling● Fully programmable zoom ratios● Independent horizontal/vertical scaling● Advanced zoom algorithm provides high image quality● Sharpness/Smooth filter enhancement● Support non-linear scaling from 4:3 to 16:9 or 16:9 to 4:3Color Processor● True 10 bits color processing engine● sRGB compliance● Advanced dithering logic for 18-bit panel color depth enhancement● Brightness and contrast control● Programmable 10-bit gamma support● Peaking/Coring function for video sharpnessVividColor™● Independent color management (ICM)● Dynamic contrast control (DCC)Output Interface● Fully programmable display timing generator● Flexible data pair swapping for easier system design.● Single or Dual display interface supported up to 186MHz, FHD resolution● LVDS output interface● Support 8 bits LVDS output● Spread-Spectrum DPLL to reduce EMI● Fixed Last Line output for perfect panel capabilityEmbedded OSD● Embedded 16.5K SRAM dynamically stores OSD command and fonts● Support multi-color RAM font, 1, 2 and 4-bit per pixel● 64 color palette● Maximum 10 window with alpha-blending/ gradient / gradient target color / gradient reversed color/ dynamic fade-in/fade-out, bordering/ shadow/3D window type● Rotary 90,180,270 degree● Independent row shadowing/bordering● Programmable blinking effects for each character● OSD-made internal pattern generator for factory mode● Support 12x18~4x18 proportional font● Hardware decompression for OSD font● Special function for closed-caption● Support 2 independent font basePower & Package● 3.3V / 1.2V power supply● 64 pin LQFP 7x7 package
      		OTHERIn StockNew Sealed Under Guarantee
      RTD2281DW
      FeaturesGeneral● Embedded DDC with DDC1/2B/CI● Embedded one MCU with SPI flash controller.● Require only one crystal to generate all timing.● Programmable internal low-voltage-reset (LVR)● High resolution 6 channels PWM output, and wide range selectable PWM frequency.● Support input format up to FHD● Embedded BJT control circuit for 1.2V regulator replacementAnalog RGB Input Interface● One Analog input supported● Integrated 8-bit triple-channel 210MHz ADC/PLL(option)● Embedded programmable Schmitt trigger of HSYNC● Support Sync-On-Green (SOG) and various kinds of composite sync modes● On-chip high-performance hybrid PLLs● High resolution true 64 phase ADC PLLEmbedded MCU● Industrial standard 8051 core with external serial flash● Low speed ADC for various application● I2C Master or Slave hardware supportedAuto Detection /Auto Calibration● Input format detection● Compatibility with standard VESA mode and support user-defined mode● Smart engine for Phase/Image position/Color calibrationScaling● Fully programmable zoom ratios● Independent horizontal/vertical scaling● Advanced zoom algorithm provides high image quality● Sharpness/Smooth filter enhancement● Support non-linear scaling from 4:3 to 16:9 or 16:9 to 4:3Color Processor● True 10 bits color processing engine● sRGB compliance● Advanced dithering logic for 18-bit panel color depth enhancement● Brightness and contrast control● Programmable 10-bit gamma support● Peaking/Coring function for video sharpnessVividColor™● Independent color management (ICM)● Dynamic contrast control (DCC)Output Interface● Fully programmable display timing generator● Flexible data pair swapping for easier system design.● Single or Dual display interface supported up to 186MHz, FHD resolution● LVDS output interface● Support 8 bits LVDS output● Spread-Spectrum DPLL to reduce EMI● Fixed Last Line output for perfect panel capabilityEmbedded OSD● Embedded 16.5K SRAM dynamically stores OSD command and fonts● Support multi-color RAM font, 1, 2 and 4-bit per pixel● 64 color palette● Maximum 10 window with alpha-blending/ gradient / gradient target color / gradient reversed color/ dynamic fade-in/fade-out, bordering/ shadow/3D window type● Rotary 90,180,270 degree● Independent row shadowing/bordering● Programmable blinking effects for each character● OSD-made internal pattern generator for factory mode● Support 12x18~4x18 proportional font● Hardware decompression for OSD font● Special function for closed-caption● Support 2 independent font basePower & Package● 3.3V / 1.2V power supply● 64 pin LQFP 7x7 package
      		OTHERIn StockNew Sealed Under Guarantee
      RTD2482D-GR
      		OTHERIn StockNew Sealed Under Guarantee
      RTD2483XD-CG
      		OTHERIn StockNew Sealed Under Guarantee
      RTD2522
      FeaturesGeneral● Embedded dual DDC support DDC1, DDC2B, DDC/CI● Zoom scaling up and down● Embedded Pattern Generator● No external memory required.● Require only one crystal to generate all timing● Embedded reset control output● Embedded crystal output to MICROP● 3 channels 8 bits PWM output, and selectable PWM clock frequency.Analog RGB Input Interface● Integrated 8-bit triple-channel 140MHz ADC/PLL● Support up to 140MHz (SXGA@ 75Hz)● Embedded programmable Schmitt trigger of HSYNC● Support Sync On Green (SOG) and de-composite sync modes● On-chip high-performance PLLs● 32 phase APLLDigital Input Interface● Support 8-bit video (ITU 656) format input● Built-in YUV to RGB color space converter & de-interlaceDVI Compliant Digital Input Interface● Single link on-chip TMDS receiver● Operation up to 165Mhz● Direct connect to DVI compliant TMDS transmitterAuto Detection /Auto Calibration● Input format detection● Compatibility with standard VESA mode and support user-defined mode● Smart engine for Phase and Image position calibrationScaling● Fully programmable zoom ratios● Independent horizontal/vertical scaling● Advanced zoom algorithm provides high image quality● Sharpness/Smooth filter enhancementColor Processor● Digital brightness and contrast adjustments● sRGB compliance● Gamma correction● Dithering logic for 18-bit panel color depth enhancementOutput Interface● Built-in display timing generator and fully programmable● (RTD2523) 1 and 2-pixel/clock panel support and up to 140MHz● (RTD2513) 1 and 2-pixel/clock panel support and up to 95MHz● Scaler internal LSB/MSB swap, odd/even swap and red/blue group swap.● Programmable TCON function support● RSDS (Reduced Swing Differential Signaling) data bus type 1~3.● Dual/Single LVDS interface output● Reduced EMI and power saving feature● Integrated Spread-Spectrum DCLK PLL.Host Interface● Support MCU serial bus interface● Support MCU parallel bus interfaceEmbedded OSD● Embedded 11.25K SRAM dynamically stores OSD command and fonts● Support multi-color RAM font, 1, 2 and 4-bit per pixel● 16 color palette with 24bit true color selection● Maximum 8 window with alpha-blending/gradient/dynamic fade-in/fade-out, bordering/shadow/3D window type● Every window can place anywhere on the screen● Rotary 90,180,270 degree● Independent row shadowing/bordering● Programmable blinking effects for each character● OSD-made internal pattern generator for factory mode● Support 12x18~4x18 proportional fontPower & Technology● 2.5V/3.3V power supplier● 0.25um CMOS process; 128-pin QFP package.
      		OTHERIn StockNew Sealed Under Guarantee
      RTD2533V-LF
      FeaturesGeneral● Embedded dual DDC support DDC1, DDC2B, DDC/CI● Zoom scaling up and down● Embedded Pattern Generator● No external memory required.● Require only one crystal to generate all timing● Embedded reset control output● Embedded crystal output to MICROP● 3 channels 8 bits PWM output, and selectable PWM clock frequency.Analog RGB Input Interface● Integrated 8-bit triple-channel 140MHz ADC/PLL● Support up to 140MHz (SXGA@ 75Hz)● Embedded programmable Schmitt trigger of HSYNC● Support Sync On Green (SOG) and de-composite sync modes● On-chip high-performance PLLs● 32 phase APLLDigital Input Interface● Support 8-bit video (ITU 656) format input● Built-in YUV to RGB color space converter & de-interlaceDVI Compliant Digital Input Interface● Single link on-chip TMDS receiver● Operation up to 165Mhz● Direct connect to DVI compliant TMDS transmitterAuto Detection /Auto Calibration● Input format detection● Compatibility with standard VESA mode and support user-defined mode● Smart engine for Phase and Image position calibrationScaling● Fully programmable zoom ratios● Independent horizontal/vertical scaling● Advanced zoom algorithm provides high image quality● Sharpness/Smooth filter enhancementColor Processor● Digital brightness and contrast adjustments● sRGB compliance● Gamma correction● Dithering logic for 18-bit panel color depth enhancementOutput Interface● Built-in display timing generator and fully programmable● (RTD2523) 1 and 2-pixel/clock panel support and up to 140MHz● (RTD2513) 1 and 2-pixel/clock panel support and up to 95MHz● Scaler internal LSB/MSB swap, odd/even swap and red/blue group swap.● Programmable TCON function support● RSDS (Reduced Swing Differential Signaling) data bus type 1~3.● Dual/Single LVDS interface output● Reduced EMI and power saving feature● Integrated Spread-Spectrum DCLK PLL.Host Interface● Support MCU serial bus interface● Support MCU parallel bus interfaceEmbedded OSD● Embedded 11.25K SRAM dynamically stores OSD command and fonts● Support multi-color RAM font, 1, 2 and 4-bit per pixel● 16 color palette with 24bit true color selection● Maximum 8 window with alpha-blending/gradient/dynamic fade-in/fade-out, bordering/shadow/3D window type● Every window can place anywhere on the screen● Rotary 90,180,270 degree● Independent row shadowing/bordering● Programmable blinking effects for each character● OSD-made internal pattern generator for factory mode● Support 12x18~4x18 proportional fontPower & Technology● 2.5V/3.3V power supplier● 0.25um CMOS process; 128-pin QFP package.
      		OTHERIn StockNew Sealed Under Guarantee
      RTD2555LRH
      FeaturesGeneral● Embedded dual DDC support DDC1, DDC2B, DDC/CI● Zoom scaling up and down● Embedded Pattern Generator● No external memory required.● Require only one crystal to generate all timing● Embedded reset control output● Embedded crystal output to MICROP● 3 channels 8 bits PWM output, and selectable PWM clock frequency.Analog RGB Input Interface● Integrated 8-bit triple-channel 140MHz ADC/PLL● Support up to 140MHz (SXGA@ 75Hz)● Embedded programmable Schmitt trigger of HSYNC● Support Sync On Green (SOG) and de-composite sync modes● On-chip high-performance PLLs● 32 phase APLLDigital Input Interface● Support 8-bit video (ITU 656) format input● Built-in YUV to RGB color space converter & de-interlaceDVI Compliant Digital Input Interface● Single link on-chip TMDS receiver● Operation up to 165Mhz● Direct connect to DVI compliant TMDS transmitterAuto Detection /Auto Calibration● Input format detection● Compatibility with standard VESA mode and support user-defined mode● Smart engine for Phase and Image position calibrationScaling● Fully programmable zoom ratios● Independent horizontal/vertical scaling● Advanced zoom algorithm provides high image quality● Sharpness/Smooth filter enhancementColor Processor● Digital brightness and contrast adjustments● sRGB compliance● Gamma correction● Dithering logic for 18-bit panel color depth enhancementOutput Interface● Built-in display timing generator and fully programmable● (RTD2523) 1 and 2-pixel/clock panel support and up to 140MHz● (RTD2513) 1 and 2-pixel/clock panel support and up to 95MHz● Scaler internal LSB/MSB swap, odd/even swap and red/blue group swap.● Programmable TCON function support● RSDS (Reduced Swing Differential Signaling) data bus type 1~3.● Dual/Single LVDS interface output● Reduced EMI and power saving feature● Integrated Spread-Spectrum DCLK PLL.Host Interface● Support MCU serial bus interface● Support MCU parallel bus interfaceEmbedded OSD● Embedded 11.25K SRAM dynamically stores OSD command and fonts● Support multi-color RAM font, 1, 2 and 4-bit per pixel● 16 color palette with 24bit true color selection● Maximum 8 window with alpha-blending/gradient/dynamic fade-in/fade-out, bordering/shadow/3D window type● Every window can place anywhere on the screen● Rotary 90,180,270 degree● Independent row shadowing/bordering● Programmable blinking effects for each character● OSD-made internal pattern generator for factory mode● Support 12x18~4x18 proportional fontPower & Technology● 2.5V/3.3V power supplier● 0.25um CMOS process; 128-pin QFP package.
      		OTHERIn StockNew Sealed Under Guarantee
      RTD2660H-GR
      		OTHERIn StockNew Sealed Under Guarantee
      RTD2672-GR
      		OTHERIn StockNew Sealed Under Guarantee
      RTD2910
      OverviewThis chip is the micro-processor of LCD monitor. It uses the Designware DW8051 of Synopsys as the 8051 core of this chip and is compatible with other industry 8051 series. Also, 96Kbyte FLASH with 8 bit bus is embedded in this chip which is licensed from TSMC 0.18um e-FLASH process. Here we use the package of PLCC44/LQFP48/QFP44 if we would like to have a discrete MCU controller or we make a multi-chip package with our LCD monitor controller to form one chip package to save the cost of package and PCB material.Features• Operating voltage range : 3.0V to 3.6V• 8051 core, CPU operating frequency up to 50MHz• 4 clocks per machine cycle• 256-byte internal RAM• 512-byte external data RAM, including 256-byte DDC RAM(128-byte x 2) and 256-byte general purpose RAM• 96K-byte flash memory, 64k for program and 32k for saving parameter• Two DDC ports compliant with VESA DDC1/2B/2Bi/CI• Three channels of PWM DAC with programmable frequency from 100K to 100Hz• Watchdog timer with programmable interval• Three 16-bit counters/timers (T0, T1, and T2)• One PLL to provide programmable operating frequency and clock output, 2 clock output ports• One full-duplex serial port• Six interrupt sources with 2 external interrupts• Four channels of 6-bit ADC• Hardware In System Programming(ISP) capability, no boot code required• Built-in Low voltage reset circuit• Embedded 1.8V regulator• Code protection• Available in 44-pin PLCC, 44-pin QFP or 48-pin LQFP package
      		OTHERIn StockNew Sealed Under Guarantee
      RTL2836B
      		OTHERIn StockNew Sealed Under Guarantee
      RTL8035SB
      General DescriptionThe RTL8019AS is a highly integrated Ethernet Controller which offers a simple solution to implement a Plug and Play NE2000 compatible adapter with full-duplex and power down features. With the three level power down control features, the RTL8019AS is made to be an ideal choice of the network device for a GREEN PC system. The full-duplex function enables simultaneously transmission and reception on the twisted-pair link to a full-duplex Ethernet switching hub. This feature not only increases the channel bandwidth from 10 to 20 Mbps but also avoids the performance degrading problem due to the channel contention characteristics of the Ethernet CSMA/CD protocol. The Microsofts Plug and Play function can relieve the users from pains of taking care the adapters resource configurations such as IRQ, I/O, and memory address, etc However, for special applications not to be used as a Plug and Play compatible device, the RTL8019AS also supports the jumper and proprietary jumperless options.FEATURES❐ 100-pin PQFP❐ RTL8019 software compatible❐ Supports PnP auto detect mode (RTL8019AS only)❐ Compliant to Ethernet II and IEEE802.3 10Base5, 10Base2, 10BaseT❐ Software compatible with NE2000 on both 8 and 16-bit slots❐ Supports both jumper and jumperless modes❐ Supports Microsoft‘s Plug and Play configuration for jumperless mode❐ Supports Full-Duplex Ethernet function to double channel bandwidth❐ Supports three level power down modes:- Sleep- Power down with internal clock running- Power down with internal clock halted❐ Built-in data prefetch function to improve performance❐ Supports UTP, AUI & BNC auto-detect (RTL8019AS only)❐ Supports auto polarity correction for 10BaseT❐ Support 8 IRQ lines❐ Supports 16 I/O base address options― and extra I/O address fully decode mode (RTL8019AS only)❐ Supports 16K, 32K, 64K and 16K-page mode access to BROM (up to 256 pages with 16K bytes/page)❐ Supports BROM disable command to release memory after remote boot❐ Supports flash memory read/write (RTL8019AS only)❐ 16k byte SRAM built in (RTL8019AS only)❐ Use 9346 (64*16-bit EEPROM) to store resource configurations and ID parameters❐ Capable of programming blank 9346 on board for manufacturing convenience❐ Support 4 diagnostic LED pins with programmable outputs
      		OTHERIn StockNew Sealed Under Guarantee
      RTL8101E-GR
      General DescriptionThe Realtek RTL8101L is a highly integrated and cost-effective single-chip Fast Ethernet controller that provides 32-bit performance, PCI bus master capability, and full compliance with IEEE 802.3u 100Base-TX specifications and IEEE 802.3x Full Duplex Flow Control. It also supports the Advanced Configuration Power management Interface (ACPI), PCI power management for modern operating systems that are capable of Operating System Directed Power Management (OSPM) to achieve the most efficient power management possible. The RTL8101L no longer supports CardBus mode as RTL8139C does.Features:Ethernet Controller Features:100 pin LQFPIntegrated Fast Ethernet MAC, Physical chip andtransceiver in one chip10 Mb/s and 100 Mb/s operationSupports 10 Mb/s and 100 Mb/s N-wayAuto-negotiation operationPCI local bus single-chip Fast Ethernet controller— Compliant to PCI Revision 2.2— Supports PCI clock 16.75MHz-40MHz— Supports PCI target fast back-to-back transaction— Provides PCI bus master data transfers and PCI memory space or I/O space mapped data transfers of RTL8101L's operational registers— Supports PCI VPD (Vital Product Data)— Supports ACPI, PCI power managementSupports 25MHz crystal or 25MHz OSC as the internal clock source. The frequency deviation of either crystalor OSC must be within 50 PPM.Compliant to PC99/PC2001standardSupports Wake-On-LAN function and remote wake-up (Magic Packet*, LinkChg and Microsoft® wake-up frame)Supports 4 Wake-On-LAN (WOL) signals (active high, active low, positive pulse, and negative pulse)Supports auxiliary power-on internal reset, for remote wake-up when main power remains offSupports auxiliary power auto-detect, and sets the related capability of power management registers in PCIconfiguration spaceIncludes a programmable PCI burst size and early Tx/Rx thresholdSupports a 32-bit general-purpose timer with the external PCI clock as clock source to generate timer-interruptContains two large (2Kbyte) independent receive and transmit FIFOsAdvanced power saving mode when LAN function or wakeup function is not usedUses 93C46 (64*16-bit EEPROM) to store resource configuration, ID parameter, and VPD dataSupports LED pins for various network activity indicationsSupports loopback capabilityHalf/Full duplex capabilitySupports Full Duplex Flow Control (IEEE 802.3x)3.3V power supply, 3.3V and 5V I/O toleranceInterface for 128K byte (max) Boot ROM for both EEPROM and Flash Memory.MC’97 Controller Features:MC’97 compatible digital controller chipPCI local bus single-chip Fast Ethernet controller32-bit PCI bus master and PCI v 2.2 compliantPCI Bus Power Management Interface Specification v1.1 compliantHigh performance bus master DMA for data transferAC’97 v 2.2 compliantSupports 16-bit modem line (LINE1)Full-duplex operation for simultaneous LINE1 transactionsLow latency GPIO updated8 double-WORD (16 samples) FIFO depth for each bus master of LINE1-OUT/IN3.3V power supply, 3.3V and 5V I/O tolerance
      		OTHERIn StockNew Sealed Under Guarantee
      RTL8103EA-GR
      General DescriptionThe Realtek RTL8101L is a highly integrated and cost-effective single-chip Fast Ethernet controller that provides 32-bit performance, PCI bus master capability, and full compliance with IEEE 802.3u 100Base-TX specifications and IEEE 802.3x Full Duplex Flow Control. It also supports the Advanced Configuration Power management Interface (ACPI), PCI power management for modern operating systems that are capable of Operating System Directed Power Management (OSPM) to achieve the most efficient power management possible. The RTL8101L no longer supports CardBus mode as RTL8139C does.Features:Ethernet Controller Features:100 pin LQFPIntegrated Fast Ethernet MAC, Physical chip andtransceiver in one chip10 Mb/s and 100 Mb/s operationSupports 10 Mb/s and 100 Mb/s N-wayAuto-negotiation operationPCI local bus single-chip Fast Ethernet controller— Compliant to PCI Revision 2.2— Supports PCI clock 16.75MHz-40MHz— Supports PCI target fast back-to-back transaction— Provides PCI bus master data transfers and PCI memory space or I/O space mapped data transfers of RTL8101L's operational registers— Supports PCI VPD (Vital Product Data)— Supports ACPI, PCI power managementSupports 25MHz crystal or 25MHz OSC as the internal clock source. The frequency deviation of either crystalor OSC must be within 50 PPM.Compliant to PC99/PC2001standardSupports Wake-On-LAN function and remote wake-up (Magic Packet*, LinkChg and Microsoft® wake-up frame)Supports 4 Wake-On-LAN (WOL) signals (active high, active low, positive pulse, and negative pulse)Supports auxiliary power-on internal reset, for remote wake-up when main power remains offSupports auxiliary power auto-detect, and sets the related capability of power management registers in PCIconfiguration spaceIncludes a programmable PCI burst size and early Tx/Rx thresholdSupports a 32-bit general-purpose timer with the external PCI clock as clock source to generate timer-interruptContains two large (2Kbyte) independent receive and transmit FIFOsAdvanced power saving mode when LAN function or wakeup function is not usedUses 93C46 (64*16-bit EEPROM) to store resource configuration, ID parameter, and VPD dataSupports LED pins for various network activity indicationsSupports loopback capabilityHalf/Full duplex capabilitySupports Full Duplex Flow Control (IEEE 802.3x)3.3V power supply, 3.3V and 5V I/O toleranceInterface for 128K byte (max) Boot ROM for both EEPROM and Flash Memory.MC’97 Controller Features:MC’97 compatible digital controller chipPCI local bus single-chip Fast Ethernet controller32-bit PCI bus master and PCI v 2.2 compliantPCI Bus Power Management Interface Specification v1.1 compliantHigh performance bus master DMA for data transferAC’97 v 2.2 compliantSupports 16-bit modem line (LINE1)Full-duplex operation for simultaneous LINE1 transactionsLow latency GPIO updated8 double-WORD (16 samples) FIFO depth for each bus master of LINE1-OUT/IN3.3V power supply, 3.3V and 5V I/O tolerance
      		OTHERIn StockNew Sealed Under Guarantee
      0.568951s