All
      0
      Cart

      • OTHER

      • Popular
      • Newest
      • Most reviews

      IC Chips

      IC Chips
      ModelDescriptionBrandLeadingConditionPriceAction
      IC Chips
      HCPL-J312-500E
      DescriptionThe HCPL-3120 contains a GaAsP LED while the HCPL-J312 and the HCNW3120 contain an AlGaAs LED. The LED is optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices.Features• 2.5 A maximum peak output current• 2.0 A minimum peak output current• 25 kV/µs minimum Common Mode Rejection (CMR) at VCM = 1500 V• 0.5 V maximum low level output voltage (VOL) Eliminates need for negative gate drive• ICC = 5 mA maximum supply current• Under Voltage Lock-Out protection (UVLO) with hysteresis• Wide operating VCC range: 15 to 30 Volts• 500 ns maximum switching speeds• Industrial temperature range: -40°C to 100°C• SafetyApproval:UL Recognized3750 Vrms for 1 min. for HCPL-3120/J3125000 Vrms for 1 min. for HCNW3120CSA ApprovalIEC/EN/DIN EN 60747-5-2 ApprovedVIORM = 630 Vpeak for HCPL-3120 (Option 060)VIORM = 891 Vpeak for HCPL-J312VIORM = 1414 Vpeak for HCNW3120Applications• IGBT/MOSFET gate drive• AC/Brushless DC motor drives• Industrial inverters• Switch mode power supplies
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-V454-500E
      DescriptionThe HCPL-814 contains a phototransistor, optically coupled to two light emitting diodes connected inverse parallel. It can operate directly by AC input current. It is packaged in a 4-pin DIP package and available in widelead spacing option and lead bend SMD option. Inputoutput isolation voltage is 5000 Vrms. Response time, tr, is typically 4 µs and minimum CTR is 20% at input current of ±1 mA.Features• AC input response• High input-output isolation voltage (Viso = 5,000 Vrms)• Low collector dark current (ICEO: max. 10-7 A at VCE = 20 V)• Current transfer ratio (CTR: min. 20% at IF = ±1 mA, VCE = 5 V)• Response time (tr: typ. 4 µs at VCE = 2 V, IC = 2 mA, RL = 100 Ω)• Compact dual-in-line package• UL approved• CSA approved• IEC/EN/DIN EN 60747-5-2 approved• Options available:– Leads with 0.4" (10.16 mm) spacing (W00)– Leads bend for surface mounting (300)– Tape and reel for SMD (500)– IEC/EN/DIN EN 60747-5-2 approvals (060)Applications• Detecting or monitoring AC signals• AC line/digital logic isolation• Programmable logic controllers• AC/DC – input modules
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-M600-500E
      DescriptionThese small outline high CMR, high speed, logic gate opto coup lers are single channel devices in a five lead miniature foot print. They are electrically equivalent to the following Avago optocouplers (except there is no output enable feature):The SO-5 JEDEC registered (MO-155) package outline does not require “through holes” in a PCB. This package occupies approximately one fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be com patible with standard surface mount processes.The HCPL-M600/01/11 optically coupled gates combine a GaAsP light emitting diode and an integrated high gain photon detector. The output of the detector I.C. is an Open-collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 5,000 V/μs for the HCPL-M601, and 10,000 V/μs for the HCPL-M611.Features• Surface Mountable• Very Small, Low Profile JEDEC Registered Package Outline• Compatible with Infrared Vapor Phase Reflow and Wave Soldering Processes• Internal Shield for High Common Mode Rejection (CMR)HCPL-M601: 10,000 V/μs at VCM = 50 VHCPL-M611: 15,000 V/μs at VCM = 1000 V• High Speed: 10 Mbd• LSTTL/TTL Compatible• Low Input Current Capability: 5 mA• Guaranteed ac and dc Performance over Temperature: –40°C to 85°C• Safety and regulatory approvals:- UL recognized: 3750 Vac for 1 min. per U.L. (File No. 55361)- CSA component acceptance Notice #5- IEC/EN/DIN EN 60747-5-2 approved for HCPL-M601/M611 Option 060.• Lead Free OptionApplications• Isolated Line Receiver• Simplex/Multiplex Data Transmission• Computer-Peripheral Interface• Microprocessor System Interface• Digital Isolation for A/D, D/A Conversion• Switching Power Supply• Instrument Input/Output Isolation• Ground Loop Elimination• Pulse Transformer Replacement
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-7710-500E
      DescriptionAvailable in either an 8-pin DIP or SO-8 package style respectively, the HCPL-7710 or HCPL-0710 optocouplers utilize the latest CMOS IC technology to achieve outstanding performance with very low power consumption. The HCPL-x710 require only two bypass capacitors for complete CMOS compatibility.Basic building blocks of the HCPL-x710 are a CMOS LED driver IC, a high speed LED and a CMOS detector IC. A CMOS logic input signal controls the LED driver IC, which supplies current to the LED. The detector IC incorporates an integrated photodiode, a high-speed transimpedance amplifer, and a voltage comparator with an output driver.Features• +5 V CMOS compatibility• 8 ns maximum pulse width distortion• 20 ns maximum prop. delay skew• High speed: 12 Mbd• 40 ns maximum prop. delay• 10 kV/µs minimum common mode rejection• -40°C to 100°C temperature range• Safety and regulatory approvalsUL Recognized3750 Vrms for 1 min. per UL 15775000 Vrms for 1 min. per UL 1577 (for HCPL-7710 option 020)CSA Component Acceptance Notice #5IEC/EN/DIN EN 60747-5-5– VIORM = 630 Vpeak for HCPL-7710 Option 060– VIORM = 567 Vpeak for HCPL-0710 Option 060Applications• Digital feldbus isolation: DeviceNet, SDS, Profbus• AC plasma display panel level shifting• Multiplexed data transmission• Computer peripheral interface• Microprocessor system interface
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-V601-500E
      DescriptionThe HCPL-814 contains a phototransistor, optically coupled to two light emitting diodes connected inverse parallel. It can operate directly by AC input current. It is packaged in a 4-pin DIP package and available in widelead spacing option and lead bend SMD option. Inputoutput isolation voltage is 5000 Vrms. Response time, tr, is typically 4 µs and minimum CTR is 20% at input current of ±1 mA.Features• AC input response• High input-output isolation voltage (Viso = 5,000 Vrms)• Low collector dark current (ICEO: max. 10-7 A at VCE = 20 V)• Current transfer ratio (CTR: min. 20% at IF = ±1 mA, VCE = 5 V)• Response time (tr: typ. 4 µs at VCE = 2 V, IC = 2 mA, RL = 100 Ω)• Compact dual-in-line package• UL approved• CSA approved• IEC/EN/DIN EN 60747-5-2 approved• Options available:– Leads with 0.4" (10.16 mm) spacing (W00)– Leads bend for surface mounting (300)– Tape and reel for SMD (500)– IEC/EN/DIN EN 60747-5-2 approvals (060)Applications• Detecting or monitoring AC signals• AC line/digital logic isolation• Programmable logic controllers• AC/DC – input modules
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-810J-500E
      		OTHERIn StockNew Sealed Under Guarantee
      2.211693s