All
      0
      Cart

      • OTHER

      • Popular
      • Newest
      • Most reviews

      Optoisolators - Transistor, Photovoltaic Output

      Optoisolators - Transistor, Photovoltaic Output
      ModelDescriptionBrandLeadingConditionPriceAction
      Optoisolators - Transistor, Photovoltaic Output
      HCPL-817-500E
      DescriptionThe HCPL-817 contains a light emitting diode optically coupled to a phototransistor. It is packaged in a 4-pin DIP package and available in wide-lead spacing option and lead bend SMD option. Input-output isolationvoltage is 5000 Vrms. Response time, tr, is typically 4 µs and minimum CTR is 50% at input current of 5 mA.Features• Current Transfer Ratio (CTR: min. 50% at IF = 5 mA, VCE = 5 V)• High input-output isolation voltage (Viso = 5000 Vrms)• Response time (tr: typ., 4 µs at VCE = 2 V, IC = 2 mA, RL = 100 Ω)• Compact dual-in-line package• UL approved• CSA approved• IEC/EN/DIN EN 60747-5-2 approved• Options available:– Leads with 0.4" (10.16 mm) spacing (W00)– Leads bends for surface mounting (300)– Tape and reel for SMD (500)– IEC/EN/DIN EN 60747-5-2 approvals (060)Applications• Signal transmission between circuits of different potentials and impedances• I/O interfaces for computers• Feedback circuit in power supply
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-J454-500E
      DescriptionThe HCPL-4504 and HCPL-0454 contain a GaAsP LED while the HCPL-J454 and HCNW4504 contain an AlGaAs LED. The LED is optically coupled to an integrated high gain photo detector.The HCPL-4504 series has short propagation delays and high CTR. The HCPL-4504 series also has a guaranteed propagation delay difference (tPLH-tPHL). These features make the HCPL-4504 series an excellent solution to IPM inverter dead time and other switching problems. The CTR, propagation delay, and CMR are specified both for TTL and IPM conditions which are provided for ease of application.Features• Short propagation delays for TTL and IPM applications• 15 kV/μs minimum Common Mode Transient immunity at VCM = 1500 V for TTL/load drive• High CTR at TA = 25°C>25% for HCPL-4504/0454>23% for HCNW4504>19% for HCPL-J454• Electrical specifications for common IPM applications• TTL compatible• Open collector output• Safety approval:UL recognized– 3750 V rms/1min. for HCPL-4504/0454/J454– 5000 V rms/1min. for HCPL-4504 Option 020 and HCNW4504CSA approvedIEC/EN/DIN EN 60747-5-2 approved– VIORM = 560 Vpeak for HCPL-0454 Option 060– VIORM = 630 Vpeak for HCPL-4504 Option 060– VIORM = 891 Vpeak for HCPL-J454– VIORM = 1414 Vpeak for HCNW4504Applications• Inverter circuits and Intelligent Power Module (IPM) interfacing: High Common Mode Transient immunity (> 10 kV/μs for an IPM load/drive) and (tPLH - tPHL) Specified (see Power Inverter Dead Time section)• Line receivers: Short propagation delays and low in put-output capacitance• High speed logic ground isolation: TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces pulse transformers: Save board space and weight• Analog signal ground isolation: Integrated photodetector provides improved linearity over phototransistors
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-M452-500E
      DescriptionThese small outline high CMR, high speed, diode-transistor optocouplers are single channel devices in a five lead miniature footprint. They are electrically equivalent to the following Avago optocouplers:The SO-5 JEDEC registered (MO-155) package outline does not require “through holes” in a PCB. This package occupies approximately one-fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be com-patible with standard surface mount processes.Features• Surface mountable• Very small, low profile JEDEC registered package outline• Compatible with infrared vapor phase reflow and wave soldering processes• Very high common mode transient immunity: 15000 V/μs at VCM = 1500 V guaranteed (HCPL-M453)• High speed: 1 Mb/s• TTL compatible• Open collector output• Worldwide Safety Approval:– UL1577 recognized, 3750Vrms/1min– CSA Approved• Lead free optionApplications• Line receivers: High common mode transient immunity (>1000 V/μs) and low input-output capaci tance (0.6 pF).• High speed logic ground isolation: TTL/TTL, TTL/LTTL, TTL/CMOS, TTL/LSTTL• Replace slow phototran sistor optocouplers• Replace pulse transformers: save board space and weight• Analog signal ground isolation: Integrated photon detector provides improved linearity over phototransistor type
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-M701-500E
      DescriptionThese small outline high CMR, high speed, diode-transistor optocouplers are single channel devices in a five lead miniature footprint. They are electrically equivalent to the following Agilent optocouplers:The SO-5 JEDEC registered (MO-155) package outline does not require “through holes” in a PCB. This package occupies approximately one-fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be compatible with standard surface mount processes.Features• Surface Mountable• Very Small, Low Profile JEDEC Registered Package Outline• Compatible with Infrared Vapor Phase Reflow and Wave Soldering Processes• Very High Common Mode Transient Immunity: 15000 V/µs at VCM = 1500 V Guaranteed (HCPL-M453)• High Speed: 1 Mb/s• TTL Compatible• Guaranteed AC and DC Performance over Temperature: 0°C to 70°C• Open Collector Output• Recognized Under the Component Program of U.L. (File No. E55361) for Dielectric Withstand Proof Test Voltage of 3750 Vac, 1 Minute• Lead Free OptionApplications• Line Receivers - High common mode transient immunity (>1000 V/µs) and low input-output capacitance (0.6 pF).• High Speed Logic Ground Isolation - TTL/TTL, TTL/LTTL, TTL/CMOS, TTL/LSTTL.• Replace Slow Phototransistor Optocouplers• Replace Pulse Transformers - Save board space and weight• Analog Signal Ground Isolation - Integrated photon detector provides improved linearity over phototransistor type.
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-M453-500E
      DescriptionThese small outline high CMR, high speed, diode-transistor optocouplers are single channel devices in a five lead miniature footprint. They are electrically equivalent to the following Avago optocouplers:The SO-5 JEDEC registered (MO-155) package outline does not require “through holes” in a PCB. This package occupies approximately one-fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be com-patible with standard surface mount processes.Features• Surface mountable• Very small, low profile JEDEC registered package outline• Compatible with infrared vapor phase reflow and wave soldering processes• Very high common mode transient immunity: 15000 V/μs at VCM = 1500 V guaranteed (HCPL-M453)• High speed: 1 Mb/s• TTL compatible• Open collector output• Worldwide Safety Approval:– UL1577 recognized, 3750Vrms/1min– CSA Approved• Lead free optionApplications• Line receivers: High common mode transient immunity (>1000 V/μs) and low input-output capaci tance (0.6 pF).• High speed logic ground isolation: TTL/TTL, TTL/LTTL, TTL/CMOS, TTL/LSTTL• Replace slow phototran sistor optocouplers• Replace pulse transformers: save board space and weight• Analog signal ground isolation: Integrated photon detector provides improved linearity over phototransistor type
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-4731-500E
      DescriptionThese devices are very low power consumption, high gain single and dual channel optocouplers. The HCPL-4701 represents the single channel 8-Pin DIP configuration and is pin compatible with the industry standard 6N139. The HCPL-4731 represents the dual channel 8-Pin DIP configuration and is pin compatible with the popular standard HCPL-2731. The HCPL-070A and HCPL-073A are the equivalent single and dual channel products in an SO-8 footprint. Each channel can be driven with an input current as low as 40 µA and has a typical current transfer ratio of 3500%.Features• Ultra low input current capability - 40 µA• Specified for 3 V operationTypical power consumption: <1 mWInput power: <50 µWOutput power: <500 µW• Will operate with VCC as low as 1.6 V• High current transfer ratio: 3500% at IF = 40 µA• TTL and CMOS compatible output• Specified ac and dc performance over temperature: 0°C to 70°C• Safety approval:UL recognized – 3750 V rms for 1 minute and 5000 V rms* for 1 minute per UL1577CSA approvedIEC/EN/DIN EN 60747-5-2 approved with VIORM = 630 V peak (Option 060) for HCPL-4701• 8-pin product compatible with 6N138/6N139 and HCPL-2730/HCPL-2731• Available in 8-Pin DIP and SOIC-8 footprint• Through hole and surface mount assembly availableApplications• Battery operated applications• ISDN telephone interface• Ground isolation between logic families – TTL, LSTTL, CMOS, HCMOS, HL-CMOS, LV-HCMOS• Low input current line receiver• EIA RS-232C line receiver• Telephone ring detector• AC line voltage status indicator – low input power dissipation• Low power systems – ground isolation• Portable system I/O interface
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-4534-500E
      DescriptionThese diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.Features• 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453)• High Speed: 1 Mb/s• TTL Compatible• Available in 8-Pin DIP, SO-8, Widebody Packages• Open Collector Output• Guaranteed Performance from Temperature: 0°C to 70°C• Safety ApprovalUL Recognized – 3750 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577CSA ApprovedIEC/EN/DIN EN 60747-5-2Approved–VIORM = 630 V peak for HCPL-4503#060–VIORM = 1414 V peak for HCNW devices• Dual Channel Version Available (253X/4534/053X/ 0534)• MIL-PRF-38534 Hermetic Version Available (55XX/ 65XX/4N55)Applications• High Voltage Insulation• Video Signal Isolation• Power Transistor Isolation in Motor Drives• Line Receivers• Feedback Element in Switched Mode Power Supplies• High Speed Logic Ground Isolation – TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces Pulse Transformers• Replaces Slow Phototransistor Isolators• Analog Signal Ground Isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-4503-500E
      DescriptionThese diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.Features• 15 kV/µs Minimum CommonMode Transient Immunity at VCM = 1500 V (4503/0453)• High Speed: 1 Mb/s• TTL Compatible• Available in 8-Pin DIP, SO-8, Widebody Packages• Open Collector Output• Guaranteed Performance from Temperature: 0°C to 70°C• Safety ApprovalUL Recognized – 3750 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577CSA ApprovedIEC/EN/DIN EN 60747-5-2Approved–VIORM = 630 V peak for HCPL-4503#060–VIORM = 1414 V peak for HCNW devices• Dual Channel Version Available (253X/4534/053X/ 0534)• MIL-PRF-38534 Hermetic Version Available (55XX/ 65XX/4N55)Applications• High Voltage Insulation• Video Signal Isolation• Power Transistor Isolation in Motor Drives• Line Receivers• Feedback Element in Switched Mode Power Supplies• High Speed Logic Ground Isolation – TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces Pulse Transformers• Replaces Slow Phototransistor Isolators• Analog Signal Ground Isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-814-500E
      DescriptionThe HCPL-814 contains a phototransistor, optically coupled to two light emitting diodes connected inverse parallel. It can operate directly by AC input current. It is packaged in a 4-pin DIP package and available in wide-lead spacing option and lead bend SMD option. Input-output isolation voltage is 5000 Vrms. Response time, tr, is typically 4 µs and minimum CTR is 20% at input current of ± 1 mA.Features• AC input response• High input-output isolation voltage (Viso= 5,000 Vrms)• Low collector dark current (ICEO: max. 10-7 A at VCE = 20 V)• Current transfer ratio (CTR: min. 20% at IF = ± 1 mA, VCE = 5 V)• Response time (tr: typ. 4 µs at VCE = 2 V, IC = 2 mA, RL= 100Ω)• Compact dual-in-line package• UL approved• CSA approved• IEC/EN/DIN EN 60747-5-2 approved• Options available:– Leads with 0.4" (10.16 mm) spacing (W00)– Leads bend for surface mounting (300)– Tape and reel for SMD (500)– IEC/EN/DIN EN 60747-5-2 approvals (060)Applications• Detecting or monitoring AC signals• AC line/digital logic isolation• Programmable logic controllers• AC/DC – input modules
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2730-500E
      DescriptionThese dual channel optocouplers contain a separated pair of GaAsP light emitting diodes optically coupled to a pair of integrated high gain photo detectors. They provide extremely high current transfer ratio and excellent input-output common mode transient immunity. A separate pin for the photodiodes and frst gain stages (VCC) permits lower output saturation voltage and higher speed operation than possible with conventional photodarlington type optocouplers. In addition, VCC may be as low as 1.6V without adversely affecting the parametric performance.Features• High current transfer ratio – 1800% typical• Low input current requirements – 0.5 mA• Low output saturation voltage – 0.1 V• High density packaging• Performance guaranteed over temperature 0°C to 70°C• LSTTL compatible• High output current – 60 mA• Safety approval:UL recognized – 3750 V rms for 1 minute and5000V rms* for 1 minuteCSA approved• Available in 8 pin DIP and SO-8 footprint• MIL-PRF-38534 hermetic version available(HCPL-5730/5731)• Surface mount gull wing option available for 8-pin DIP(Option 300)Applications• Digital logic ground isolation• Telephone ring detector• Level shifting• EIA RS-232C line receiver• Polarity sensing• Low input current line receiver – long line or party line• Microprocessor bus isolation• Current loop receiver• Line voltage status indicator – low input power dissipation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-273L-500E
      DescriptionThese high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide extremely high current transfer ratio between input and output.Features• 3.3V/5V Dual Supply Voltages• Low power consumption• High current transfer ratio• Low input current requirements – 0.5 mA• LVTTL/LVCMOS compatible output• Performance guaranteed over temperature 0°C to +70°C• Base access allows gain bandwidth adjustment• High output current – 60 mA• Safety approval, UL, IEC/EN/DIN EN 60747-5-2, CSAApplications• Ground isolate most logic families – LVTTL/LVCMOS• Low input current line receiver• High voltage insulation• EIA RS-232C line receiver• Telephone ring detector• V AC line voltage status indicator – low input powerdissipation• Low power systems – ground isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2530-500E
      DescriptionThese diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.Features• 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453)• High Speed: 1 Mb/s• TTL Compatible• Available in 8-Pin DIP, SO-8, Widebody Packages• Open Collector Output• Guaranteed Performance from Temperature: 0°C to 70°C• Safety ApprovalUL Recognized – 3750 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577CSA ApprovedIEC/EN/DIN EN 60747-5-2Approved–VIORM = 630 V peak for HCPL-4503#060–VIORM = 1414 V peak for HCNW devices• Dual Channel Version Available (253X/4534/053X/ 0534)• MIL-PRF-38534 Hermetic Version Available (55XX/ 65XX/4N55)Applications• High Voltage Insulation• Video Signal Isolation• Power Transistor Isolation in Motor Drives• Line Receivers• Feedback Element in Switched Mode Power Supplies• High Speed Logic Ground Isolation – TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces Pulse Transformers• Replaces Slow Phototransistor Isolators• Analog Signal Ground Isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2530-500E
      DescriptionThese diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.Features• 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453)• High Speed: 1 Mb/s• TTL Compatible• Available in 8-Pin DIP, SO-8, Widebody Packages• Open Collector Output• Guaranteed Performance from Temperature: 0°C to 70°C• Safety ApprovalUL Recognized – 3750 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577CSA ApprovedIEC/EN/DIN EN 60747-5-2Approved–VIORM = 630 V peak for HCPL-4503#060–VIORM = 1414 V peak for HCNW devices• Dual Channel Version Available (253X/4534/053X/ 0534)• MIL-PRF-38534 Hermetic Version Available (55XX/ 65XX/4N55)Applications• High Voltage Insulation• Video Signal Isolation• Power Transistor Isolation in Motor Drives• Line Receivers• Feedback Element in Switched Mode Power Supplies• High Speed Logic Ground Isolation – TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces Pulse Transformers• Replaces Slow Phototransistor Isolators• Analog Signal Ground Isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-4701-500E
      DescriptionThese devices are very low power consumption, high gain single and dual channel optocouplers. The HCPL-4701 represents the single channel 8-Pin DIP configuration and is pin compatible with the industry standard 6N139. The HCPL-4731 represents the dual channel 8-Pin DIP configuration and is pin compatible with the popular standard HCPL-2731. The HCPL-070A and HCPL-073A are the equivalent single and dual channel products in an SO-8 footprint. Each channel can be driven with an input current as low as 40 µA and has a typical current transfer ratio of 3500%.Features• Ultra low input current capability - 40 µA• Specified for 3 V operationTypical power consumption: <1 mWInput power: <50 µWOutput power: <500 µW• Will operate with VCC as low as 1.6 V• High current transfer ratio: 3500% at IF = 40 µA• TTL and CMOS compatible output• Specified ac and dc performance over temperature: 0°C to 70°C• Safety approval:UL recognized – 3750 V rms for 1 minute and 5000 V rms* for 1 minute per UL1577CSA approvedIEC/EN/DIN EN 60747-5-2 approved with VIORM = 630 V peak (Option 060) for HCPL-4701• 8-pin product compatible with 6N138/6N139 and HCPL-2730/HCPL-2731• Available in 8-Pin DIP and SOIC-8 footprint• Through hole and surface mount assembly availableApplications• Battery operated applications• ISDN telephone interface• Ground isolation between logic families – TTL, LSTTL, CMOS, HCMOS, HL-CMOS, LV-HCMOS• Low input current line receiver• EIA RS-232C line receiver• Telephone ring detector• AC line voltage status indicator – low input power dissipation• Low power systems – ground isolation• Portable system I/O interface
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-4502-500E
      DescriptionThese diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.Features• 15 kV/µs Minimum CommonMode Transient Immunity at VCM = 1500 V (4503/0453)• High Speed: 1 Mb/s• TTL Compatible• Available in 8-Pin DIP, SO-8, Widebody Packages• Open Collector Output• Guaranteed Performance from Temperature: 0°C to 70°C• Safety ApprovalUL Recognized – 3750 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577CSA ApprovedIEC/EN/DIN EN 60747-5-2Approved–VIORM = 630 V peak for HCPL-4503#060–VIORM = 1414 V peak for HCNW devices• Dual Channel Version Available (253X/4534/053X/ 0534)• MIL-PRF-38534 Hermetic Version Available (55XX/ 65XX/4N55)Applications• High Voltage Insulation• Video Signal Isolation• Power Transistor Isolation in Motor Drives• Line Receivers• Feedback Element in Switched Mode Power Supplies• High Speed Logic Ground Isolation – TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces Pulse Transformers• Replaces Slow Phototransistor Isolators• Analog Signal Ground Isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-4504-500E
      DescriptionThe HCPL-4504 and HCPL-0454 contain a GaAsP LED while the HCPL-J454 and HCNW4504 contain an AlGaAs LED. The LED is optically coupled to an integrated high gain photo detector.The HCPL-4504 series has short propagation delays and high CTR. The HCPL-4504 series also has a guaranteed propagation delay difference (tPLH-tPHL). These features make the HCPL-4504 series an excellent solution to IPM inverter dead time and other switching problems. The CTR, propagation delay, and CMR are specified both for TTL and IPM conditions which are provided for ease of application.Features• Short propagation delays for TTL and IPM applications• 15 kV/μs minimum Common Mode Transient immunity at VCM = 1500 V for TTL/load drive• High CTR at TA = 25°C>25% for HCPL-4504/0454>23% for HCNW4504>19% for HCPL-J454• Electrical specifications for common IPM applications• TTL compatible• Open collector output• Safety approval:UL recognized– 3750 V rms/1min. for HCPL-4504/0454/J454– 5000 V rms/1min. for HCPL-4504 Option 020 and HCNW4504CSA approvedIEC/EN/DIN EN 60747-5-2 approved– VIORM = 560 Vpeak for HCPL-0454 Option 060– VIORM = 630 Vpeak for HCPL-4504 Option 060– VIORM = 891 Vpeak for HCPL-J454– VIORM = 1414 Vpeak for HCNW4504Applications• Inverter circuits and Intelligent Power Module (IPM) interfacing: High Common Mode Transient immunity (> 10 kV/μs for an IPM load/drive) and (tPLH - tPHL) Specified (see Power Inverter Dead Time section)• Line receivers: Short propagation delays and low in put-output capacitance• High speed logic ground isolation: TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces pulse transformers: Save board space and weight• Analog signal ground isolation: Integrated photodetector provides improved linearity over phototransistors
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-3760-500E
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-270L-500E
      DescriptionThese high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide extremely high current transfer ratio between input and output.Features• 3.3V/5V Dual Supply Voltages• Low power consumption• High current transfer ratio• Low input current requirements – 0.5 mA• LVTTL/LVCMOS compatible output• Performance guaranteed over temperature 0°C to +70°C• Base access allows gain bandwidth adjustment• High output current – 60 mA• Safety approval, UL, IEC/EN/DIN EN 60747-5-2, CSAApplications• Ground isolate most logic families – LVTTL/LVCMOS• Low input current line receiver• High voltage insulation• EIA RS-232C line receiver• Telephone ring detector• V AC line voltage status indicator – low input powerdissipation• Low power systems – ground isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2503-500E
      DescriptionThe HCPL-2503 optocoupler is specified for use in LSTTL-to-LSTTL and TTL-to-LSTTL logic interfaces. A nominal 8 mA sink current through the input LED will provide enough output current for proper operation of 1 LSTTL gate under worst-case conditions when used in the recommended circuits. The CTR of the HCPL-2503 is 15% minimum at IF= 8 mA.Features• Data rates to 250 kb/s NRZ• LSTTL compatible• High common mode transient immunity: > 1000 V/µs• 3750 Vdc withstand test voltage• Open collector output• Guaranteed performance from temperature: 0°C to 70°C• Safety approval- UL Recognized - 3750Vrms for 1min (5000Vrms for 1 min Option 020 devices) per UL1577.- IEC/EN/DIN EN 60747-5-2 Approved- VIORM = 630 Vpeak for option 060Applications• High speed logic ground isolation– LSTTL-to-LSTTL and TTL-to-LSTTL• High voltage isolation• Analog signal ground isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2533-500E
      DescriptionThese diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.Features• 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453)• High Speed: 1 Mb/s• TTL Compatible• Available in 8-Pin DIP, SO-8, Widebody Packages• Open Collector Output• Guaranteed Performance from Temperature: 0°C to 70°C• Safety ApprovalUL Recognized – 3750 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577CSA ApprovedIEC/EN/DIN EN 60747-5-2Approved–VIORM = 630 V peak for HCPL-4503#060–VIORM = 1414 V peak for HCNW devices• Dual Channel Version Available (253X/4534/053X/ 0534)• MIL-PRF-38534 Hermetic Version Available (55XX/ 65XX/4N55)Applications• High Voltage Insulation• Video Signal Isolation• Power Transistor Isolation in Motor Drives• Line Receivers• Feedback Element in Switched Mode Power Supplies• High Speed Logic Ground Isolation – TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces Pulse Transformers• Replaces Slow Phototransistor Isolators• Analog Signal Ground Isolation
      		OTHERIn StockNew Sealed Under Guarantee
      0.598132s