All
      0
      Cart
      Avago +

      • OTHER

      • Popular
      • Newest
      • Most reviews

      Avago

      Optoisolators - Logic Output Isolators - Gate Drivers Optoisolators - Transistor, Photovoltaic Output ADCs/DACs Instrumentation Amplifier IC Chips Special Purpose Power Management IC
      ModelDescriptionBrandLeadingConditionPriceAction
      Optoisolators - Logic Output
      HCPL-M601-500E
      DescriptionThese small outline high CMR, high speed, logic gate opto coup lers are single channel devices in a five lead miniature foot print. They are electrically equivalent to the following Avago optocouplers (except there is no output enable feature):The SO-5 JEDEC registered (MO-155) package outline does not require “through holes” in a PCB. This package occupies approximately one fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be com patible with standard surface mount processes.The HCPL-M600/01/11 optically coupled gates combine a GaAsP light emitting diode and an integrated high gain photon detector. The output of the detector I.C. is an Open-collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 5,000 V/μs for the HCPL-M601, and 10,000 V/μs for the HCPL-M611.Features• Surface Mountable• Very Small, Low Profile JEDEC Registered Package Outline• Compatible with Infrared Vapor Phase Reflow and Wave Soldering Processes• Internal Shield for High Common Mode Rejection (CMR)HCPL-M601: 10,000 V/μs at VCM = 50 VHCPL-M611: 15,000 V/μs at VCM = 1000 V• High Speed: 10 Mbd• LSTTL/TTL Compatible• Low Input Current Capability: 5 mA• Guaranteed ac and dc Performance over Temperature: –40°C to 85°C• Safety and regulatory approvals:- UL recognized: 3750 Vac for 1 min. per U.L. (File No. 55361)- CSA component acceptance Notice #5- IEC/EN/DIN EN 60747-5-2 approved for HCPL-M601/M611 Option 060.• Lead Free OptionApplications• Isolated Line Receiver• Simplex/Multiplex Data Transmission• Computer-Peripheral Interface• Microprocessor System Interface• Digital Isolation for A/D, D/A Conversion• Switching Power Supply• Instrument Input/Output Isolation• Ground Loop Elimination• Pulse Transformer Replacement
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-M611-500E
      DescriptionThese small outline high CMR, high speed, logic gate opto coup lers are single channel devices in a five lead miniature foot print. They are electrically equivalent to the following Avago optocouplers (except there is no output enable feature):The SO-5 JEDEC registered (MO-155) package outline does not require “through holes” in a PCB. This package occupies approximately one fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be com patible with standard surface mount processes.The HCPL-M600/01/11 optically coupled gates combine a GaAsP light emitting diode and an integrated high gain photon detector. The output of the detector I.C. is an Open-collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 5,000 V/μs for the HCPL-M601, and 10,000 V/μs for the HCPL-M611.Features• Surface Mountable• Very Small, Low Profile JEDEC Registered Package Outline• Compatible with Infrared Vapor Phase Reflow and Wave Soldering Processes• Internal Shield for High Common Mode Rejection (CMR)HCPL-M601: 10,000 V/μs at VCM = 50 VHCPL-M611: 15,000 V/μs at VCM = 1000 V• High Speed: 10 Mbd• LSTTL/TTL Compatible• Low Input Current Capability: 5 mA• Guaranteed ac and dc Performance over Temperature: –40°C to 85°C• Safety and regulatory approvals:- UL recognized: 3750 Vac for 1 min. per U.L. (File No. 55361)- CSA component acceptance Notice #5- IEC/EN/DIN EN 60747-5-2 approved for HCPL-M601/M611 Option 060.• Lead Free OptionApplications• Isolated Line Receiver• Simplex/Multiplex Data Transmission• Computer-Peripheral Interface• Microprocessor System Interface• Digital Isolation for A/D, D/A Conversion• Switching Power Supply• Instrument Input/Output Isolation• Ground Loop Elimination• Pulse Transformer Replacement
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-263A-500E
      DescriptionThe HCPL-261A family of optically coupled gates shown on this data sheet provide all the benefts of the industry standard 6N137 family with the added beneft of HCMOS compatible input current. This allows direct interface to all common circuit topologies without additional LED buffer or drive components. The AlGaAs LED used allows lower drive currents and reduces degradation by using the latest LED technology. On the single channel parts, an enable output allows the detector to be strobed. The output of the detector IC is an open collector schottky-clamped transistor. The internal shield provides a minimum common mode transient immunity of 1000V/µs for the HCPL-261A family and 15000 V/µs for the HCPL-261N family.Features• HCMOS/LSTTL/TTL performance compatible• 1000 V/µs minimum Common Mode Rejection (CMR)at VCM = 50 V (HCPL-261A family) and 15 kV/µsminimum CMR at VCM = 1000 V (HCPL-261N family)• High speed: 10 MBd typical• AC and DC performance specifed over industrialtemperature range -40°C to +85°C• Available in 8 pin DIP, SOIC-8 packages• Safety approval:– UL recognized per UL1577 3750V rms for 1 minuteand 5000Vrms for 1 minute (Option 020)– CSA Approved– IEC/EN/DIN EN 60747-5-2 approvedApplications• Low input current (3.0 mA) HCMOS compatible version of 6N137 optocoupler• Isolated line receiver• Simplex/multiplex data transmission• Computer-peripheral interface• Digital isolation for A/D, D/A conversion• Switching power supplies• Instrumentation input/output isolation• Ground loop elimination• Pulse transformer replacement
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-263L-500E
      DescriptionThe HCPL-260L/060L/263L/063L are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable in put allows the detector to be strobed. The output of the detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 15 kV/μs at 3.3V.This unique design provides maximum AC and DC circuit isolation while achieving LVTTL/LVCMOS compati-bili ty. The optocoupler AC and DC operational parameters are guaranteed from –40°C to +85°C allowing trouble free system performance.Features• 3.3V/5V Dual Supply Voltages• Low power consumption• 15 kV/μs minimum Common Mode Rejection (CMR) at VCM = 1000 V• High speed: 15 MBd typical• LVTTL/LVCMOS compatible• Low input current capability: 5 mA• Guaranteed AC and DC performance over temperature: –40°C to +85°C• Available in 8-pin DIP, SOIC-8• Strobable output (single channel products only)• Safety approvals: UL, CSA, IEC/EN/DIN EN 60747-5-2Applications• Isolated line receiver• Computer-peripheral interfaces• Microprocessor system interfaces• Digital isolation for A/D, D/A conversion• Switching power supply• Instrument input/output isolation• Ground loop elimination• Pulse transformer replacement• Field buses
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-260L-500E
      DescriptionThe HCPL-260L/060L/263L/063L are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable in put allows the detector to be strobed. The output of the detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 15 kV/μs at 3.3V.This unique design provides maximum AC and DC circuit isolation while achieving LVTTL/LVCMOS compati-bili ty. The optocoupler AC and DC operational parameters are guaranteed from –40°C to +85°C allowing trouble free system performance.Features• 3.3V/5V Dual Supply Voltages• Low power consumption• 15 kV/μs minimum Common Mode Rejection (CMR) at VCM = 1000 V• High speed: 15 MBd typical• LVTTL/LVCMOS compatible• Low input current capability: 5 mA• Guaranteed AC and DC performance over temperature: –40°C to +85°C• Available in 8-pin DIP, SOIC-8• Strobable output (single channel products only)• Safety approvals: UL, CSA, IEC/EN/DIN EN 60747-5-2Applications• Isolated line receiver• Computer-peripheral interfaces• Microprocessor system interfaces• Digital isolation for A/D, D/A conversion• Switching power supply• Instrument input/output isolation• Ground loop elimination• Pulse transformer replacement• Field buses
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2631-500E
      DescriptionThe 6N137, HCPL-26XX/06XX/4661, HCNW137/26X1 are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed.The output of the detector IC is an open collector Schottky clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 5,000 V/µs for the HCPL-X601/X631 and HCNW2601, and 10,000 V/µs for the HCPL-X611/X661 and HCNW2611.This unique design provides maximum ac and dc circuit isolation while achieving TTL compatibility. The optocoupler ac and dc operational parameters are guaranteed from -40°C to +85°C allowing troublefree system performance.Features• 5 kV/µs Minimum CommonMode Rejection (CMR) atVCM = 50 V for HCPL-X601/X631, HCNW2601 and10 kV/µs Minimum CMR at VCM = 1000 V for HCPL X611/X661, HCNW2611• High Speed: 10 MBd Typical• LSTTL/TTL Compatible• Low Input Current Capability: 5 mA• Guaranteed ac and dc Performance over Temperature: -40°C to +85°C• Available in 8-Pin DIP, SOIC-8, Widebody Packages• Strobable Output (Single Channel Products Only)• Safety ApprovalUL Recognized - 3750 V rmsfor 1 minute and 5000 V rms*for 1 minute per UL1577CSA Approved IEC/EN/DIN EN 60747-5-2 Approved with VIORM = 630 V peakfor HCPL-2611 Option 060 and VIORM = 1414 V peak for HCNW137/26X1• MIL-PRF-38534 Hermetic Version Available (HCPL-56XX/66XX)Applications• Isolated Line Receiver• Computer-Peripheral Interfaces• Microprocessor System Interfaces• Digital Isolation for A/D, D/A Conversion• Switching Power Supply• Instrument Input/Output Isolation• Ground Loop Elimination• Pulse Transformer Replacement• Power Transistor Isolation in Motor Drives• Isolation of High Speed Logic Systems
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2212-500E
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2200-500E
      DescriptionThe HCPL-2200/2219 are optically coupled logic gates that combine a GaAsP LED and an integrated high gain photo detector. The detector has a three state output stage and has a detector threshold with hysteresis. The three state output eliminates the need for a pullup resistor and allows for direct drive of data busses. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter.Features• 2.5 kV/µs minimum Common Mode Rejection (CMR) at VCM = 400 V (HCPL-2219)• Compatible with LSTTL, TTL, and CMOS logic• Wide VCC range (4.5 to 20 V)• 2.5 Mbd guaranteed over temperature• Low input current (1.6 mA)• Three state output (no pullup resistor required)• Guaranteed performance from 0°C to 85°C• Hysteresis• Safety approval– UL recognized -3750 V rms for 1 minute– CSA approved– IEC/EN/DIN EN 60747-5-2 approved with VIORM = 630 V peak (HCPL-2219 Option 060 only)• MIL-PRF-38534 hermetic version available (HCPL-5200/1)Applications• Isolation of high speed logic systems• Computer-peripheral interfaces• Microprocessor system interfaces• Ground loop elimination• Pulse transformer replacement• Isolated buss driver• High speed line receiver
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2219-500E
      DescriptionThe HCPL-2200/2219 are optically coupled logic gates that combine a GaAsP LED and an integrated high gain photo detector. The detector has a three state output stage and has a detector threshold with hysteresis. The three state output eliminates the need for a pullup resistor and allows for direct drive of data busses. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter.Features• 2.5 kV/µs minimum Common Mode Rejection (CMR) at VCM = 400 V (HCPL-2219)• Compatible with LSTTL, TTL, and CMOS logic• Wide VCC range (4.5 to 20 V)• 2.5 Mbd guaranteed over temperature• Low input current (1.6 mA)• Three state output (no pullup resistor required)• Guaranteed performance from 0°C to 85°C• Hysteresis• Safety approval– UL recognized -3750 V rms for 1 minute– CSA approved– IEC/EN/DIN EN 60747-5-2 approved with VIORM = 630 V peak (HCPL-2219 Option 060 only)• MIL-PRF-38534 hermetic version available (HCPL-5200/1)Applications• Isolation of high speed logic systems• Computer-peripheral interfaces• Microprocessor system interfaces• Ground loop elimination• Pulse transformer replacement• Isolated buss driver• High speed line receiver
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-7721-500E
      DescriptionAvailable in either an 8-pin DIP or SO-8 package style respectively, the HCPL-772X or HCPL-072Xoptocouplers utilize the latest CMOS IC technology to achieve outstanding performance with verylow power consumption.Features• +5 V CMOS compatibility• 20 ns maximum prop. delay skew• High speed: 25 MBd• 40 ns max. prop. delay• 10 kV/µs minimum common mode rejection• –40 to 85°C temperature range• Safety and regulatory approvalsUL recognized3750 V rms for 1 min. per UL 1577CSA component acceptance notice #5IEC/EN/DIN EN 60747-5-2–VIORM= 630 Vpeak for HCPL-772X option 060–VIORM= 560 Vpeak for HCPL-072X option 060Applications• Digital fieldbus isolation: CC-Link, DeviceNet, Profibus, SDS• AC plasma display panel level shifting• Multiplexed data transmission• Computer peripheral interface• Microprocessor system interface
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-7611-500E
      DescriptionThe HCPL-7510 isolated linear current sensing IC family is designed for current sensing in low-power electronic motor drives. In a typical implementation, motor current flows through an external resistor and the resulting analog voltage drop is sensed by the HCPL-7510. An output voltage is created on the other side of the HCPL-7510 optical isolation barrier. This single-ended output voltage is proportional to the motor current. Since common-mode voltage swings of several hundred volts in tens of nanoseconds are common in modern switching inverter motor drives, the HCPL-7510 was designed to ignore very high common-mode transient slew rates (ofat least 10 kV/µs).Features• 15 kV/µs common-mode rejection at Vcm = 1000 V• Compact, auto-insertable 8-pin DIP package• 60 ppm/°C gain drift vs. temperature• –0.6 mV input offset voltage• 8 µV/°C input offset voltage vs. temperature• 100 kHz bandwidth• 0.06% nonlinearity, single-ended amplifier output for low power application.• Worldwide safety approval: UL 1577 (3750 Vrms/1 min.), CSA and IEC/EN/DIN EN 60747-5-2 (Option 060 only)• Advanced sigma-delta (S-D) A/D converter technologyApplications• Low-power inverter current sensing• Motor phase and rail current sensing• Switched mode power supply signal isolation• General purpose low-power current sensing and monitoring• General purpose analog signal isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-4661-500E
      DescriptionThe 6N137, HCPL-26XX/06XX/4661, HCNW137/26X1 are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed.The output of the detector IC is an open collector Schottky clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 5,000 V/µs for the HCPL-X601/X631 and HCNW2601, and 10,000 V/µs for the HCPL-X611/X661 and HCNW2611.This unique design provides maximum ac and dc circuit isolation while achieving TTL compatibility. The optocoupler ac and dc operational parameters are guaranteed from -40°C to +85°C allowing troublefree system performance.Features• 5 kV/µs Minimum CommonMode Rejection (CMR) atVCM = 50 V for HCPL-X601/X631, HCNW2601 and10 kV/µs Minimum CMR at VCM = 1000 V for HCPL X611/X661, HCNW2611• High Speed: 10 MBd Typical• LSTTL/TTL Compatible• Low Input Current Capability: 5 mA• Guaranteed ac and dc Performance over Temperature: -40°C to +85°C• Available in 8-Pin DIP, SOIC-8, Widebody Packages• Strobable Output (Single Channel Products Only)• Safety ApprovalUL Recognized - 3750 V rmsfor 1 minute and 5000 V rms*for 1 minute per UL1577CSA Approved IEC/EN/DIN EN 60747-5-2 Approved with VIORM = 630 V peakfor HCPL-2611 Option 060 and VIORM = 1414 V peak for HCNW137/26X1• MIL-PRF-38534 Hermetic Version Available (HCPL-56XX/66XX)Applications• Isolated Line Receiver• Computer-Peripheral Interfaces• Microprocessor System Interfaces• Digital Isolation for A/D, D/A Conversion• Switching Power Supply• Instrument Input/Output Isolation• Ground Loop Elimination• Pulse Transformer Replacement• Power Transistor Isolation in Motor Drives• Isolation of High Speed Logic Systems
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-M456-500E
      DescriptionThese small outline high CMR, high speed, diode-transistor optocouplers are single channel devices in a five lead miniature footprint. They are electrically equivalent to the following Avago optocouplers:The SO-5 JEDEC registered (MO-155) package outline does not require “through holes” in a PCB. This package occupies approximately one-fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be com-patible with standard surface mount processes.Features• Surface mountable• Very small, low profile JEDEC registered package outline• Compatible with infrared vapor phase reflow and wave soldering processes• Very high common mode transient immunity: 15000 V/μs at VCM = 1500 V guaranteed (HCPL-M453)• High speed: 1 Mb/s• TTL compatible• Open collector output• Worldwide Safety Approval:– UL1577 recognized, 3750Vrms/1min– CSA Approved• Lead free optionApplications• Line receivers: High common mode transient immunity (>1000 V/μs) and low input-output capaci tance (0.6 pF).• High speed logic ground isolation: TTL/TTL, TTL/LTTL, TTL/CMOS, TTL/LSTTL• Replace slow phototran sistor optocouplers• Replace pulse transformers: save board space and weight• Analog signal ground isolation: Integrated photon detector provides improved linearity over phototransistor type
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-J456-500E
      DescriptionThe HCPL-4506 and HCPL-0466 contain a GaAsP LED while the HCPL-J456 and the HCNW4506 contain an AlGaAs LED. The LED is optically coupled to an integrated high gain photo detector. Minimized propagation delay difference between devices makes these optocouplers excellent solutions for improving inverter efciency through reduced switching dead time.An on chip 20 kΩ output pull-up resistor can be enabled by shorting output pins 6 and 7, thus eliminating the need for an external pull-up resistor in common IPM applications. Specifcations and performance plots are given for typical IPM applications.Features• Performance specifed for bommon IPM applicationsover industrial temperature range: -40°C to 100°C• Fast maximum propagation delaystPHL = 480 nstPLH = 550 ns• Minimized Pulse Width DistortionPWD = 450 ns• 15 kV/µs minimum common mode transient immunityat VCM = 1500 V• CTR > 44% at IF = 10 mA• Safety approval:UL Recognized-3750 V rms / 1 min. for HCPL-4506/0466/J456-5000 V rms / 1 min. for HCPL-4506 Option 020and HCNW4506CSA ApprovedIEC/EN/DIN EN 60747-5-2 Approved-VIORM = 560 Vpeak for HCPL-0466 Option 060-VIORM = 630 Vpeak for HCPL-4506 Option 060-VIORM = 891 Vpeak for HCPL-J456-VIORM = 1414 Vpeak for HCNW4506Applications• IPM isolation• Isolated IGBT/MOSFET gate drive• AC and brushless DC motor drives• Industrial inverters
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-263N-500E
      DescriptionThe HCPL-261A family of optically coupled gates shown on this data sheet provide all the benefts of the industry standard 6N137 family with the added beneft of HCMOS compatible input current. This allows direct interface to all common circuit topologies without additional LED buffer or drive components. The AlGaAs LED used allows lower drive currents and reduces degradation by using the latest LED technology. On the single channel parts, an enable output allows the detector to be strobed. The output of the detector IC is an open collector schottky-clamped transistor. The internal shield provides a minimum common mode transient immunity of 1000V/µs for the HCPL-261A family and 15000 V/µs for the HCPL-261N family.Features• HCMOS/LSTTL/TTL performance compatible• 1000 V/µs minimum Common Mode Rejection (CMR)at VCM = 50 V (HCPL-261A family) and 15 kV/µsminimum CMR at VCM = 1000 V (HCPL-261N family)• High speed: 10 MBd typical• AC and DC performance specifed over industrialtemperature range -40°C to +85°C• Available in 8 pin DIP, SOIC-8 packages• Safety approval:– UL recognized per UL1577 3750V rms for 1 minuteand 5000Vrms for 1 minute (Option 020)– CSA Approved– IEC/EN/DIN EN 60747-5-2 approvedApplications• Low input current (3.0 mA) HCMOS compatible version of 6N137 optocoupler• Isolated line receiver• Simplex/multiplex data transmission• Computer-peripheral interface• Digital isolation for A/D, D/A conversion• Switching power supplies• Instrumentation input/output isolation• Ground loop elimination• Pulse transformer replacement
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-261N-500E
      DescriptionThe HCPL-261A family of optically coupled gates shown on this data sheet provide all the benefts of the industry standard 6N137 family with the added beneft of HCMOS compatible input current. This allows direct interface to all common circuit topologies without additional LED buffer or drive components. The AlGaAs LED used allows lower drive currents and reduces degradation by using the latest LED technology. On the single channel parts, an enable output allows the detector to be strobed. The output of the detector IC is an open collector schottky-clamped transistor. The internal shield provides a minimum common mode transient immunity of 1000V/µs for the HCPL-261A family and 15000 V/µs for the HCPL-261N family.Features• HCMOS/LSTTL/TTL performance compatible• 1000 V/µs minimum Common Mode Rejection (CMR)at VCM = 50 V (HCPL-261A family) and 15 kV/µsminimum CMR at VCM = 1000 V (HCPL-261N family)• High speed: 10 MBd typical• AC and DC performance specifed over industrialtemperature range -40°C to +85°C• Available in 8 pin DIP, SOIC-8 packages• Safety approval:– UL recognized per UL1577 3750V rms for 1 minuteand 5000Vrms for 1 minute (Option 020)– CSA Approved– IEC/EN/DIN EN 60747-5-2 approvedApplications• Low input current (3.0 mA) HCMOS compatible version of 6N137 optocoupler• Isolated line receiver• Simplex/multiplex data transmission• Computer-peripheral interface• Digital isolation for A/D, D/A conversion• Switching power supplies• Instrumentation input/output isolation• Ground loop elimination• Pulse transformer replacement
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2630-500E
      DescriptionThe 6N137, HCPL-26XX/06XX/4661, HCNW137/26X1 are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed.The output of the detector IC is an open collector Schottky clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 5,000 V/µs for the HCPL-X601/X631 and HCNW2601, and 10,000 V/µs for the HCPL-X611/X661 and HCNW2611.This unique design provides maximum ac and dc circuit isolation while achieving TTL compatibility. The optocoupler ac and dc operational parameters are guaranteed from -40°C to +85°C allowing troublefree system performance.Features• 5 kV/µs Minimum CommonMode Rejection (CMR) atVCM = 50 V for HCPL-X601/X631, HCNW2601 and10 kV/µs Minimum CMR at VCM = 1000 V for HCPL X611/X661, HCNW2611• High Speed: 10 MBd Typical• LSTTL/TTL Compatible• Low Input Current Capability: 5 mA• Guaranteed ac and dc Performance over Temperature: -40°C to +85°C• Available in 8-Pin DIP, SOIC-8, Widebody Packages• Strobable Output (Single Channel Products Only)• Safety ApprovalUL Recognized - 3750 V rmsfor 1 minute and 5000 V rms*for 1 minute per UL1577CSA Approved IEC/EN/DIN EN 60747-5-2 Approved with VIORM = 630 V peakfor HCPL-2611 Option 060 and VIORM = 1414 V peak for HCNW137/26X1• MIL-PRF-38534 Hermetic Version Available (HCPL-56XX/66XX)Applications• Isolated Line Receiver• Computer-Peripheral Interfaces• Microprocessor System Interfaces• Digital Isolation for A/D, D/A Conversion• Switching Power Supply• Instrument Input/Output Isolation• Ground Loop Elimination• Pulse Transformer Replacement• Power Transistor Isolation in Motor Drives• Isolation of High Speed Logic Systems
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2211-500E
      		OTHERIn StockNew Sealed Under Guarantee
      Isolators - Gate Drivers
      ACPL-T350-500E
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-J314-500E
      DescriptionThe HCPL-315X consists of a LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices.Features• 0.5 A Minimum Peak Output Current• 15 kV/µs Minimum Common Mode Rejection (CMR) at VCM = 1500 V• 1.0 V Maximum Low Level Output Voltage (VOL) Eliminates Need for Negative Gate Drive• ICC = 5 mA Maximum Supply Current• Under Voltage Lock-Out Protection (UVLO) with Hysteresis• Wide Operating VCC Range: 15 to 30 Volts• 0.5 µs Maximum Propagation Delay• +/– 0.35 µs Maximum Delay Between Devices/Channels• Industrial Temperature Range: -40°C to 100°C• HCPL-315J: Channel One to Channel Two Output Isolation = 1500 Vrms/1 min.• Safety and Regulatory Approval: UL Recognized (UL1577) 3750 Vrms/1 min. IEC/EN/DIN EN 60747-5-2Approved VIORM = 630 Vpeak (HCPL-3150 Option 060 only) VIORM = 891 Vpeak (HCPL-315J) CSA CertifiedApplications• Isolated IGBT/MOSFET Gate Drive• AC and Brushless DC Motor Drives• Industrial Inverters• Switch Mode Power Supplies (SMPS)• Uninterruptable Power Supplies (UPS)
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-315J-500E
      DescriptionThe HCPL-315X consists of an LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and current supplied by this optocoupler makes it ideally suited for directly driving IGBTs with ratings up to 1200 V/50 A. For IGBTs with higher ratings, the HCPL-3150/315J can be used to drive a discrete power stage which drives the IGBT gate.Features• 0.6A maximum peak output current• 0.5 A minimum peak output current• 15 kV/µs minimum Common Mode Rejection (CMR) at VCM = 1500 V• 1.0V maximum low level output voltage (VOL) eliminates need for negative gate drive• ICC = 5 mA maximum supply current• Under Voltage Lock-Out protection (UVLO) with hysteresis• Wide operating VCC range: 15 to 30 volts• 0.5 µs maximum propagation delay• +/– 0.35 µs maximum delay between devices/channels• Industrial temperature range: -40°C to 100°C• HCPL-315J: channel one to channel two output isolation = 1500 Vrms/1 min.• Safety and regulatory approval:UL recognized (UL1577), 3750 Vrms/1 min.IEC/EN/DIN EN 60747-5-2 approvedVIORM = 630 Vpeak (HCPL-3150 option 060 only)VIORM = 891 Vpeak (HCPL-315J) CSA certifiedApplications• Isolated IGBT/MOSFET gate drive• AC and brushless dc motor drives• Industrial inverters• Switch Mode Power Supplies (SMPS)• Uninterruptable Power Supplies (UPS)
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-3020-500E
      DescriptionThe HCPL-3020 and HCPL-0302 consist of a GaAsP LED optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate-controlled devices. The voltage and current supplied by this optocoupler makes it ideally suited for directly driving small or medium power IGBTs. For IGBTs with higher ratings, the HCPL-0314/3140 (0.6 A), HCPL-3150 (0.6 A) or HCPL-3120 (2.5 A) gate drive opto-couplers can be used.Features• 0.4 A maximum peak output current• 0.2 A minimum peak output current• High speed response: 0.7 µs maximum propagation delay over temperature range• Ultra high CMR: minimum 10 kV/µs at VCM = 1000 V• Bootstrappable supply current: maximum 3 mA• Wide operating temperature range: –40°C to 100°C• Wide VCC operating range: 10 V to 30 V over tempera ture range• Available in DIP 8 and SO-8 packages• Safety approvals: UL approval, 3750 VRMS for 1 minute• CSA approval• IEC/EN/DIN EN 60747-5-2 approvalVIORM = 630 VPEAK (HCPL-3020),VIORM = 566 VPEAK (HCPL-0302)Applications• Isolated IGBT/power MOSFET gate drive• AC and brushless DC motor drives• Industrial inverters• Air conditioner• Washing machine• Induction heater for cooker• Switching power supplies (SPS)
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-3140-500E
      DescriptionThe HCPL-3140/HCPL-0314 family of devices consists of a GaAsP LED optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices.Features• 0.4 A minimum peak output current• High speed response:0.7 µs maximum propagation delay over temperature range• Ultra high CMR: minimum 25 kV/µs at VCM = 1 kV• Bootstrappable supply current: maximum 3 mA• Wide operating temperature range: –40°C to 100°C• Wide VCCoperating range: 10 V to 30 V over temp. range• Available in DIP8 and SO8 package• Safety approvals: UL approval, 3750 Vrmsfor 1 minute.CSA approval. IEC/EN/DIN EN 60747-5-2 approvalVIORM = 630 Vpeak (HCPL-3140)Applications• Isolated IGBT/Power MOSFET gate drive• AC and brushless DC motor drives• Inverters for home appliances• Industrial inverters• Switch Mode Power Supplies (SMPS)
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-3120-500E
      DescriptionThe HCPL-3120 contains a GaAsP LED while the HCPL-J312 and the HCNW3120 contain an AlGaAs LED. The LED is optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices.Features• 2.5 A maximum peak output current• 2.0 A minimum peak output current• 25 kV/µs minimum Common Mode Rejection (CMR) at VCM = 1500 V• 0.5 V maximum low level output voltage (VOL) Eliminates need for negative gate drive• ICC = 5 mA maximum supply current• Under Voltage Lock-Out protection (UVLO) with hysteresis• Wide operating VCC range: 15 to 30 Volts• 500 ns maximum switching speeds• Industrial temperature range: -40°C to 100°C• SafetyApproval:UL Recognized3750 Vrms for 1 min. for HCPL-3120/J3125000 Vrms for 1 min. for HCNW3120CSA ApprovalIEC/EN/DIN EN 60747-5-2 ApprovedVIORM = 630 Vpeak for HCPL-3120 (Option 060)VIORM = 891 Vpeak for HCPL-J312VIORM = 1414 Vpeak for HCNW3120Applications• IGBT/MOSFET gate drive• AC/Brushless DC motor drives• Industrial inverters• Switch mode power supplies
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-316J-500E
      DescriptionThe HCPL-315X consists of a LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices.Features• 0.5 A Minimum Peak Output Current• 15 kV/µs Minimum Common Mode Rejection (CMR) at VCM = 1500 V• 1.0 V Maximum Low Level Output Voltage (VOL) Eliminates Need for Negative Gate Drive• ICC = 5 mA Maximum Supply Current• Under Voltage Lock-Out Protection (UVLO) with Hysteresis• Wide Operating VCC Range: 15 to 30 Volts• 0.5 µs Maximum Propagation Delay• +/– 0.35 µs Maximum Delay Between Devices/Channels• Industrial Temperature Range: -40°C to 100°C• HCPL-315J: Channel One to Channel Two Output Isolation = 1500 Vrms/1 min.• Safety and Regulatory Approval: UL Recognized (UL1577) 3750 Vrms/1 min. IEC/EN/DIN EN 60747-5-2Approved VIORM = 630 Vpeak (HCPL-3150 Option 060 only) VIORM = 891 Vpeak (HCPL-315J) CSA CertifiedApplications• Isolated IGBT/MOSFET Gate Drive• AC and Brushless DC Motor Drives• Industrial Inverters• Switch Mode Power Supplies (SMPS)• Uninterruptable Power Supplies (UPS)
      		OTHERIn StockNew Sealed Under Guarantee
      Optoisolators - Transistor, Photovoltaic Output
      HCPL-817-500E
      DescriptionThe HCPL-817 contains a light emitting diode optically coupled to a phototransistor. It is packaged in a 4-pin DIP package and available in wide-lead spacing option and lead bend SMD option. Input-output isolationvoltage is 5000 Vrms. Response time, tr, is typically 4 µs and minimum CTR is 50% at input current of 5 mA.Features• Current Transfer Ratio (CTR: min. 50% at IF = 5 mA, VCE = 5 V)• High input-output isolation voltage (Viso = 5000 Vrms)• Response time (tr: typ., 4 µs at VCE = 2 V, IC = 2 mA, RL = 100 Ω)• Compact dual-in-line package• UL approved• CSA approved• IEC/EN/DIN EN 60747-5-2 approved• Options available:– Leads with 0.4" (10.16 mm) spacing (W00)– Leads bends for surface mounting (300)– Tape and reel for SMD (500)– IEC/EN/DIN EN 60747-5-2 approvals (060)Applications• Signal transmission between circuits of different potentials and impedances• I/O interfaces for computers• Feedback circuit in power supply
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-J454-500E
      DescriptionThe HCPL-4504 and HCPL-0454 contain a GaAsP LED while the HCPL-J454 and HCNW4504 contain an AlGaAs LED. The LED is optically coupled to an integrated high gain photo detector.The HCPL-4504 series has short propagation delays and high CTR. The HCPL-4504 series also has a guaranteed propagation delay difference (tPLH-tPHL). These features make the HCPL-4504 series an excellent solution to IPM inverter dead time and other switching problems. The CTR, propagation delay, and CMR are specified both for TTL and IPM conditions which are provided for ease of application.Features• Short propagation delays for TTL and IPM applications• 15 kV/μs minimum Common Mode Transient immunity at VCM = 1500 V for TTL/load drive• High CTR at TA = 25°C>25% for HCPL-4504/0454>23% for HCNW4504>19% for HCPL-J454• Electrical specifications for common IPM applications• TTL compatible• Open collector output• Safety approval:UL recognized– 3750 V rms/1min. for HCPL-4504/0454/J454– 5000 V rms/1min. for HCPL-4504 Option 020 and HCNW4504CSA approvedIEC/EN/DIN EN 60747-5-2 approved– VIORM = 560 Vpeak for HCPL-0454 Option 060– VIORM = 630 Vpeak for HCPL-4504 Option 060– VIORM = 891 Vpeak for HCPL-J454– VIORM = 1414 Vpeak for HCNW4504Applications• Inverter circuits and Intelligent Power Module (IPM) interfacing: High Common Mode Transient immunity (> 10 kV/μs for an IPM load/drive) and (tPLH - tPHL) Specified (see Power Inverter Dead Time section)• Line receivers: Short propagation delays and low in put-output capacitance• High speed logic ground isolation: TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces pulse transformers: Save board space and weight• Analog signal ground isolation: Integrated photodetector provides improved linearity over phototransistors
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-M452-500E
      DescriptionThese small outline high CMR, high speed, diode-transistor optocouplers are single channel devices in a five lead miniature footprint. They are electrically equivalent to the following Avago optocouplers:The SO-5 JEDEC registered (MO-155) package outline does not require “through holes” in a PCB. This package occupies approximately one-fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be com-patible with standard surface mount processes.Features• Surface mountable• Very small, low profile JEDEC registered package outline• Compatible with infrared vapor phase reflow and wave soldering processes• Very high common mode transient immunity: 15000 V/μs at VCM = 1500 V guaranteed (HCPL-M453)• High speed: 1 Mb/s• TTL compatible• Open collector output• Worldwide Safety Approval:– UL1577 recognized, 3750Vrms/1min– CSA Approved• Lead free optionApplications• Line receivers: High common mode transient immunity (>1000 V/μs) and low input-output capaci tance (0.6 pF).• High speed logic ground isolation: TTL/TTL, TTL/LTTL, TTL/CMOS, TTL/LSTTL• Replace slow phototran sistor optocouplers• Replace pulse transformers: save board space and weight• Analog signal ground isolation: Integrated photon detector provides improved linearity over phototransistor type
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-M701-500E
      DescriptionThese small outline high CMR, high speed, diode-transistor optocouplers are single channel devices in a five lead miniature footprint. They are electrically equivalent to the following Agilent optocouplers:The SO-5 JEDEC registered (MO-155) package outline does not require “through holes” in a PCB. This package occupies approximately one-fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be compatible with standard surface mount processes.Features• Surface Mountable• Very Small, Low Profile JEDEC Registered Package Outline• Compatible with Infrared Vapor Phase Reflow and Wave Soldering Processes• Very High Common Mode Transient Immunity: 15000 V/µs at VCM = 1500 V Guaranteed (HCPL-M453)• High Speed: 1 Mb/s• TTL Compatible• Guaranteed AC and DC Performance over Temperature: 0°C to 70°C• Open Collector Output• Recognized Under the Component Program of U.L. (File No. E55361) for Dielectric Withstand Proof Test Voltage of 3750 Vac, 1 Minute• Lead Free OptionApplications• Line Receivers - High common mode transient immunity (>1000 V/µs) and low input-output capacitance (0.6 pF).• High Speed Logic Ground Isolation - TTL/TTL, TTL/LTTL, TTL/CMOS, TTL/LSTTL.• Replace Slow Phototransistor Optocouplers• Replace Pulse Transformers - Save board space and weight• Analog Signal Ground Isolation - Integrated photon detector provides improved linearity over phototransistor type.
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-M453-500E
      DescriptionThese small outline high CMR, high speed, diode-transistor optocouplers are single channel devices in a five lead miniature footprint. They are electrically equivalent to the following Avago optocouplers:The SO-5 JEDEC registered (MO-155) package outline does not require “through holes” in a PCB. This package occupies approximately one-fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be com-patible with standard surface mount processes.Features• Surface mountable• Very small, low profile JEDEC registered package outline• Compatible with infrared vapor phase reflow and wave soldering processes• Very high common mode transient immunity: 15000 V/μs at VCM = 1500 V guaranteed (HCPL-M453)• High speed: 1 Mb/s• TTL compatible• Open collector output• Worldwide Safety Approval:– UL1577 recognized, 3750Vrms/1min– CSA Approved• Lead free optionApplications• Line receivers: High common mode transient immunity (>1000 V/μs) and low input-output capaci tance (0.6 pF).• High speed logic ground isolation: TTL/TTL, TTL/LTTL, TTL/CMOS, TTL/LSTTL• Replace slow phototran sistor optocouplers• Replace pulse transformers: save board space and weight• Analog signal ground isolation: Integrated photon detector provides improved linearity over phototransistor type
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-4731-500E
      DescriptionThese devices are very low power consumption, high gain single and dual channel optocouplers. The HCPL-4701 represents the single channel 8-Pin DIP configuration and is pin compatible with the industry standard 6N139. The HCPL-4731 represents the dual channel 8-Pin DIP configuration and is pin compatible with the popular standard HCPL-2731. The HCPL-070A and HCPL-073A are the equivalent single and dual channel products in an SO-8 footprint. Each channel can be driven with an input current as low as 40 µA and has a typical current transfer ratio of 3500%.Features• Ultra low input current capability - 40 µA• Specified for 3 V operationTypical power consumption: <1 mWInput power: <50 µWOutput power: <500 µW• Will operate with VCC as low as 1.6 V• High current transfer ratio: 3500% at IF = 40 µA• TTL and CMOS compatible output• Specified ac and dc performance over temperature: 0°C to 70°C• Safety approval:UL recognized – 3750 V rms for 1 minute and 5000 V rms* for 1 minute per UL1577CSA approvedIEC/EN/DIN EN 60747-5-2 approved with VIORM = 630 V peak (Option 060) for HCPL-4701• 8-pin product compatible with 6N138/6N139 and HCPL-2730/HCPL-2731• Available in 8-Pin DIP and SOIC-8 footprint• Through hole and surface mount assembly availableApplications• Battery operated applications• ISDN telephone interface• Ground isolation between logic families – TTL, LSTTL, CMOS, HCMOS, HL-CMOS, LV-HCMOS• Low input current line receiver• EIA RS-232C line receiver• Telephone ring detector• AC line voltage status indicator – low input power dissipation• Low power systems – ground isolation• Portable system I/O interface
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-4534-500E
      DescriptionThese diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.Features• 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453)• High Speed: 1 Mb/s• TTL Compatible• Available in 8-Pin DIP, SO-8, Widebody Packages• Open Collector Output• Guaranteed Performance from Temperature: 0°C to 70°C• Safety ApprovalUL Recognized – 3750 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577CSA ApprovedIEC/EN/DIN EN 60747-5-2Approved–VIORM = 630 V peak for HCPL-4503#060–VIORM = 1414 V peak for HCNW devices• Dual Channel Version Available (253X/4534/053X/ 0534)• MIL-PRF-38534 Hermetic Version Available (55XX/ 65XX/4N55)Applications• High Voltage Insulation• Video Signal Isolation• Power Transistor Isolation in Motor Drives• Line Receivers• Feedback Element in Switched Mode Power Supplies• High Speed Logic Ground Isolation – TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces Pulse Transformers• Replaces Slow Phototransistor Isolators• Analog Signal Ground Isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-4503-500E
      DescriptionThese diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.Features• 15 kV/µs Minimum CommonMode Transient Immunity at VCM = 1500 V (4503/0453)• High Speed: 1 Mb/s• TTL Compatible• Available in 8-Pin DIP, SO-8, Widebody Packages• Open Collector Output• Guaranteed Performance from Temperature: 0°C to 70°C• Safety ApprovalUL Recognized – 3750 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577CSA ApprovedIEC/EN/DIN EN 60747-5-2Approved–VIORM = 630 V peak for HCPL-4503#060–VIORM = 1414 V peak for HCNW devices• Dual Channel Version Available (253X/4534/053X/ 0534)• MIL-PRF-38534 Hermetic Version Available (55XX/ 65XX/4N55)Applications• High Voltage Insulation• Video Signal Isolation• Power Transistor Isolation in Motor Drives• Line Receivers• Feedback Element in Switched Mode Power Supplies• High Speed Logic Ground Isolation – TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces Pulse Transformers• Replaces Slow Phototransistor Isolators• Analog Signal Ground Isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-814-500E
      DescriptionThe HCPL-814 contains a phototransistor, optically coupled to two light emitting diodes connected inverse parallel. It can operate directly by AC input current. It is packaged in a 4-pin DIP package and available in wide-lead spacing option and lead bend SMD option. Input-output isolation voltage is 5000 Vrms. Response time, tr, is typically 4 µs and minimum CTR is 20% at input current of ± 1 mA.Features• AC input response• High input-output isolation voltage (Viso= 5,000 Vrms)• Low collector dark current (ICEO: max. 10-7 A at VCE = 20 V)• Current transfer ratio (CTR: min. 20% at IF = ± 1 mA, VCE = 5 V)• Response time (tr: typ. 4 µs at VCE = 2 V, IC = 2 mA, RL= 100Ω)• Compact dual-in-line package• UL approved• CSA approved• IEC/EN/DIN EN 60747-5-2 approved• Options available:– Leads with 0.4" (10.16 mm) spacing (W00)– Leads bend for surface mounting (300)– Tape and reel for SMD (500)– IEC/EN/DIN EN 60747-5-2 approvals (060)Applications• Detecting or monitoring AC signals• AC line/digital logic isolation• Programmable logic controllers• AC/DC – input modules
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2730-500E
      DescriptionThese dual channel optocouplers contain a separated pair of GaAsP light emitting diodes optically coupled to a pair of integrated high gain photo detectors. They provide extremely high current transfer ratio and excellent input-output common mode transient immunity. A separate pin for the photodiodes and frst gain stages (VCC) permits lower output saturation voltage and higher speed operation than possible with conventional photodarlington type optocouplers. In addition, VCC may be as low as 1.6V without adversely affecting the parametric performance.Features• High current transfer ratio – 1800% typical• Low input current requirements – 0.5 mA• Low output saturation voltage – 0.1 V• High density packaging• Performance guaranteed over temperature 0°C to 70°C• LSTTL compatible• High output current – 60 mA• Safety approval:UL recognized – 3750 V rms for 1 minute and5000V rms* for 1 minuteCSA approved• Available in 8 pin DIP and SO-8 footprint• MIL-PRF-38534 hermetic version available(HCPL-5730/5731)• Surface mount gull wing option available for 8-pin DIP(Option 300)Applications• Digital logic ground isolation• Telephone ring detector• Level shifting• EIA RS-232C line receiver• Polarity sensing• Low input current line receiver – long line or party line• Microprocessor bus isolation• Current loop receiver• Line voltage status indicator – low input power dissipation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-273L-500E
      DescriptionThese high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide extremely high current transfer ratio between input and output.Features• 3.3V/5V Dual Supply Voltages• Low power consumption• High current transfer ratio• Low input current requirements – 0.5 mA• LVTTL/LVCMOS compatible output• Performance guaranteed over temperature 0°C to +70°C• Base access allows gain bandwidth adjustment• High output current – 60 mA• Safety approval, UL, IEC/EN/DIN EN 60747-5-2, CSAApplications• Ground isolate most logic families – LVTTL/LVCMOS• Low input current line receiver• High voltage insulation• EIA RS-232C line receiver• Telephone ring detector• V AC line voltage status indicator – low input powerdissipation• Low power systems – ground isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2530-500E
      DescriptionThese diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.Features• 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453)• High Speed: 1 Mb/s• TTL Compatible• Available in 8-Pin DIP, SO-8, Widebody Packages• Open Collector Output• Guaranteed Performance from Temperature: 0°C to 70°C• Safety ApprovalUL Recognized – 3750 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577CSA ApprovedIEC/EN/DIN EN 60747-5-2Approved–VIORM = 630 V peak for HCPL-4503#060–VIORM = 1414 V peak for HCNW devices• Dual Channel Version Available (253X/4534/053X/ 0534)• MIL-PRF-38534 Hermetic Version Available (55XX/ 65XX/4N55)Applications• High Voltage Insulation• Video Signal Isolation• Power Transistor Isolation in Motor Drives• Line Receivers• Feedback Element in Switched Mode Power Supplies• High Speed Logic Ground Isolation – TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces Pulse Transformers• Replaces Slow Phototransistor Isolators• Analog Signal Ground Isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2530-500E
      DescriptionThese diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.Features• 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453)• High Speed: 1 Mb/s• TTL Compatible• Available in 8-Pin DIP, SO-8, Widebody Packages• Open Collector Output• Guaranteed Performance from Temperature: 0°C to 70°C• Safety ApprovalUL Recognized – 3750 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577CSA ApprovedIEC/EN/DIN EN 60747-5-2Approved–VIORM = 630 V peak for HCPL-4503#060–VIORM = 1414 V peak for HCNW devices• Dual Channel Version Available (253X/4534/053X/ 0534)• MIL-PRF-38534 Hermetic Version Available (55XX/ 65XX/4N55)Applications• High Voltage Insulation• Video Signal Isolation• Power Transistor Isolation in Motor Drives• Line Receivers• Feedback Element in Switched Mode Power Supplies• High Speed Logic Ground Isolation – TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces Pulse Transformers• Replaces Slow Phototransistor Isolators• Analog Signal Ground Isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-4701-500E
      DescriptionThese devices are very low power consumption, high gain single and dual channel optocouplers. The HCPL-4701 represents the single channel 8-Pin DIP configuration and is pin compatible with the industry standard 6N139. The HCPL-4731 represents the dual channel 8-Pin DIP configuration and is pin compatible with the popular standard HCPL-2731. The HCPL-070A and HCPL-073A are the equivalent single and dual channel products in an SO-8 footprint. Each channel can be driven with an input current as low as 40 µA and has a typical current transfer ratio of 3500%.Features• Ultra low input current capability - 40 µA• Specified for 3 V operationTypical power consumption: <1 mWInput power: <50 µWOutput power: <500 µW• Will operate with VCC as low as 1.6 V• High current transfer ratio: 3500% at IF = 40 µA• TTL and CMOS compatible output• Specified ac and dc performance over temperature: 0°C to 70°C• Safety approval:UL recognized – 3750 V rms for 1 minute and 5000 V rms* for 1 minute per UL1577CSA approvedIEC/EN/DIN EN 60747-5-2 approved with VIORM = 630 V peak (Option 060) for HCPL-4701• 8-pin product compatible with 6N138/6N139 and HCPL-2730/HCPL-2731• Available in 8-Pin DIP and SOIC-8 footprint• Through hole and surface mount assembly availableApplications• Battery operated applications• ISDN telephone interface• Ground isolation between logic families – TTL, LSTTL, CMOS, HCMOS, HL-CMOS, LV-HCMOS• Low input current line receiver• EIA RS-232C line receiver• Telephone ring detector• AC line voltage status indicator – low input power dissipation• Low power systems – ground isolation• Portable system I/O interface
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-4502-500E
      DescriptionThese diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.Features• 15 kV/µs Minimum CommonMode Transient Immunity at VCM = 1500 V (4503/0453)• High Speed: 1 Mb/s• TTL Compatible• Available in 8-Pin DIP, SO-8, Widebody Packages• Open Collector Output• Guaranteed Performance from Temperature: 0°C to 70°C• Safety ApprovalUL Recognized – 3750 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577CSA ApprovedIEC/EN/DIN EN 60747-5-2Approved–VIORM = 630 V peak for HCPL-4503#060–VIORM = 1414 V peak for HCNW devices• Dual Channel Version Available (253X/4534/053X/ 0534)• MIL-PRF-38534 Hermetic Version Available (55XX/ 65XX/4N55)Applications• High Voltage Insulation• Video Signal Isolation• Power Transistor Isolation in Motor Drives• Line Receivers• Feedback Element in Switched Mode Power Supplies• High Speed Logic Ground Isolation – TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces Pulse Transformers• Replaces Slow Phototransistor Isolators• Analog Signal Ground Isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-4504-500E
      DescriptionThe HCPL-4504 and HCPL-0454 contain a GaAsP LED while the HCPL-J454 and HCNW4504 contain an AlGaAs LED. The LED is optically coupled to an integrated high gain photo detector.The HCPL-4504 series has short propagation delays and high CTR. The HCPL-4504 series also has a guaranteed propagation delay difference (tPLH-tPHL). These features make the HCPL-4504 series an excellent solution to IPM inverter dead time and other switching problems. The CTR, propagation delay, and CMR are specified both for TTL and IPM conditions which are provided for ease of application.Features• Short propagation delays for TTL and IPM applications• 15 kV/μs minimum Common Mode Transient immunity at VCM = 1500 V for TTL/load drive• High CTR at TA = 25°C>25% for HCPL-4504/0454>23% for HCNW4504>19% for HCPL-J454• Electrical specifications for common IPM applications• TTL compatible• Open collector output• Safety approval:UL recognized– 3750 V rms/1min. for HCPL-4504/0454/J454– 5000 V rms/1min. for HCPL-4504 Option 020 and HCNW4504CSA approvedIEC/EN/DIN EN 60747-5-2 approved– VIORM = 560 Vpeak for HCPL-0454 Option 060– VIORM = 630 Vpeak for HCPL-4504 Option 060– VIORM = 891 Vpeak for HCPL-J454– VIORM = 1414 Vpeak for HCNW4504Applications• Inverter circuits and Intelligent Power Module (IPM) interfacing: High Common Mode Transient immunity (> 10 kV/μs for an IPM load/drive) and (tPLH - tPHL) Specified (see Power Inverter Dead Time section)• Line receivers: Short propagation delays and low in put-output capacitance• High speed logic ground isolation: TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces pulse transformers: Save board space and weight• Analog signal ground isolation: Integrated photodetector provides improved linearity over phototransistors
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-3760-500E
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-270L-500E
      DescriptionThese high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide extremely high current transfer ratio between input and output.Features• 3.3V/5V Dual Supply Voltages• Low power consumption• High current transfer ratio• Low input current requirements – 0.5 mA• LVTTL/LVCMOS compatible output• Performance guaranteed over temperature 0°C to +70°C• Base access allows gain bandwidth adjustment• High output current – 60 mA• Safety approval, UL, IEC/EN/DIN EN 60747-5-2, CSAApplications• Ground isolate most logic families – LVTTL/LVCMOS• Low input current line receiver• High voltage insulation• EIA RS-232C line receiver• Telephone ring detector• V AC line voltage status indicator – low input powerdissipation• Low power systems – ground isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2503-500E
      DescriptionThe HCPL-2503 optocoupler is specified for use in LSTTL-to-LSTTL and TTL-to-LSTTL logic interfaces. A nominal 8 mA sink current through the input LED will provide enough output current for proper operation of 1 LSTTL gate under worst-case conditions when used in the recommended circuits. The CTR of the HCPL-2503 is 15% minimum at IF= 8 mA.Features• Data rates to 250 kb/s NRZ• LSTTL compatible• High common mode transient immunity: > 1000 V/µs• 3750 Vdc withstand test voltage• Open collector output• Guaranteed performance from temperature: 0°C to 70°C• Safety approval- UL Recognized - 3750Vrms for 1min (5000Vrms for 1 min Option 020 devices) per UL1577.- IEC/EN/DIN EN 60747-5-2 Approved- VIORM = 630 Vpeak for option 060Applications• High speed logic ground isolation– LSTTL-to-LSTTL and TTL-to-LSTTL• High voltage isolation• Analog signal ground isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-2533-500E
      DescriptionThese diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.Features• 15 kV/µs Minimum Common Mode Transient Immunity at VCM = 1500 V (4503/0453)• High Speed: 1 Mb/s• TTL Compatible• Available in 8-Pin DIP, SO-8, Widebody Packages• Open Collector Output• Guaranteed Performance from Temperature: 0°C to 70°C• Safety ApprovalUL Recognized – 3750 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577CSA ApprovedIEC/EN/DIN EN 60747-5-2Approved–VIORM = 630 V peak for HCPL-4503#060–VIORM = 1414 V peak for HCNW devices• Dual Channel Version Available (253X/4534/053X/ 0534)• MIL-PRF-38534 Hermetic Version Available (55XX/ 65XX/4N55)Applications• High Voltage Insulation• Video Signal Isolation• Power Transistor Isolation in Motor Drives• Line Receivers• Feedback Element in Switched Mode Power Supplies• High Speed Logic Ground Isolation – TTL/TTL, TTL/CMOS, TTL/LSTTL• Replaces Pulse Transformers• Replaces Slow Phototransistor Isolators• Analog Signal Ground Isolation
      		OTHERIn StockNew Sealed Under Guarantee
      ADCs/DACs
      HCPL-7860-500E
      DescriptionThe HCPL-7860/HCPL-786J Optically Isolated Modulator and HCPL-0872 Digital Interface IC or digital filter together form an isolated programmable two-chip analog-to-digital converter. The isolated modulator allows direct measurement of motor phase currents in power inverters.Features• 12-bit Linearity• 200 ns Conversion Time (PreTrigger Mode 2 with HCPL-0872)• 12-bit Effective Resolution with 5 µs Signal Delay (14-bit with 102 µs) (with HCPL-0872)• Fast 3 µs Over-Range Detection (with HCPL-0872)• ± 200 mV Input Range with Single 5 V Supply• 1% Internal Reference Voltage Matching• Offset Calibration (with HCPL- 0872)• -40°C to +85°C Operating Temperature Range• 15 kV/µs Isolation Transient Immunity• Safety Approval: UL 1577, CSA and IEC/EN/DIN EN 60747-5-2Applications• Motor Phase and Rail Current Sensing• Data Acquisition Systems• Industrial Process Control• Inverter Current Sensing• General Purpose Current Sensing and Monitoring
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-786J-500E
      DescriptionThe HCPL-7860/HCPL-786J Optically Isolated Modulator and HCPL-0872 Digital Interface IC or digital filter together form an isolated programmable two-chip analog-to-digital converter. The isolated modulator allows direct measurement of motor phase currents in power inverters.Features• 12-bit Linearity• 200 ns Conversion Time (PreTrigger Mode 2 with HCPL-0872)• 12-bit Effective Resolution with 5 µs Signal Delay (14-bit with 102 µs) (with HCPL-0872)• Fast 3 µs Over-Range Detection (with HCPL-0872)• ± 200 mV Input Range with Single 5 V Supply• 1% Internal Reference Voltage Matching• Offset Calibration (with HCPL- 0872)• -40°C to +85°C Operating Temperature Range• 15 kV/µs Isolation Transient Immunity• Safety Approval: UL 1577, CSA and IEC/EN/DIN EN 60747-5-2Applications• Motor Phase and Rail Current Sensing• Data Acquisition Systems• Industrial Process Control• Inverter Current Sensing• General Purpose Current Sensing and Monitoring
      		OTHERIn StockNew Sealed Under Guarantee
      Instrumentation Amplifier
      HCPL-788J-500E
      DescriptionAvago’s Isolation Amplifier with Short Circuit and Overload Detection makes motor phase current sensing compact, affordable and easy-to-implement while satisfying worldwide safety and regulatory requirements.Features• Output Voltage Directly Compatible with A/D Converters (0 V to V REF)• Fast (3 μs) Short Circuit Detection with Transient Fault Rejection• Absolute Value Signal Output for Overload Detection• 1 μV/°C Offset Change vs. Temperature• SO-16 Package• -40°C to +85°C Operating Temperature Range• 25 kV/μs Isolation Transient Immunity• Regulatory Approvals: UL, CSA, IEC/EN/DIN EN 60747- 5-2 (1230 Vpeak Working Voltage)Applications• Motor phase and rail current sensing• Power inverter current and voltage sensing• Industrial process control• Data acquisition systems• General purpose current and voltage sensing• Traditional current transducer replacements
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-7840-500E
      DescriptionThe HCPL-7840 isolation amplifer family was designed for current sensing in electronic motor drives. In a typical implementation, motor currents flow through an external resistor and the resulting analog voltage drop is sensed by the HCPL-7840. A differential output voltage is created on the other side of the HCPL-7840 optical isolation barrier. This differential output voltage is proportional to the motor current and can be converted to a single-ended signal by using an op-amp as shown in the recommended application circuit. Since common-mode voltage swings of several hundred volts in tens of nanoseconds are common in modern switching inverter motor drives, the HCPL-7840 was designed to ignore very high common mode transient slew rates (of at least 10 kV/μs).The high CMR capability of the HCPL-7840 isolation amplifer provides the precision and stability needed to accurately monitor motor current in high noise motor control environ-ments, providing for smoother control (less “torque ripple”) in various types of motor control applications.Features● 15 kV/μs common-mode rejection at VCM = 1000 V● Compact, auto-insertable standard 8-pin DIP package● 0.00025 V/V/°C gain drift vs. temperature● 0.3 mV input offset voltage● 100 kHz bandwidth● 0.004% nonlinearity● Worldwide safety approval:UL 1577 (3750 Vrms/1 min.)and CSA, IEC/EN/DIN EN 60747-5-2● Advanced Sigma-Delta (∑-Δ) A/D converter technology● Fully differential circuit topology● 0.8 μm CMOS IC technologyApplications● Motor phase and rail current sensing● Inverter current sensing● Switched mode power supply signal isolation● General purpose current sensing and monitoring● General purpose analog signal isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-7800A-500E
      DescriptionThe HCPL-7800(A) isolation amplifer family was designed for current sensing in electronic motor drives. In a typical implementation, motor currents flow through an external resistor and the resulting analog voltage drop is sensed by the HCPL-7800(A). A differential output voltage is created on the other side of the HCPL-7800(A) optical isolation barrier. This differential output voltage is pro portional to the motor current and can be converted to a single-ended signal by using an op-amp as shown in the recommended application circuit. Since common mode voltage swings of several hundred volts in tens of nanoseconds are common in modern switching inverter motor drives, the HCPL-7800(A) was designed to ignore very high common-mode transient slew rates (of at least 10 kV/µs).Features• 15 kV/µs Common-Mode Rejection at VCM = 1000 V• Compact, Auto-Insertable Standard 8-pin DIP Package• 0.00025 V/V/°C Gain Drift vs. Temperature• 0.3 mV Input Offset Voltage• 100 kHz Bandwidth• 0.004% Nonlinearity• Worldwide Safety Approval: UL 1577 (3750 Vrms/1 min.)and CSA, IEC/EN/DIN EN 60747-5-2• Advanced Sigma-Delta (Σ−∆) A/D Converter Technology• Fully Differential Circuit TopologyApplications• Motor Phase and Rail Current Sensing• Inverter Current Sensing• Switched Mode Power Supply Signal Isolation• General Purpose Current Sensing and Monitoring• General Purpose Analog Signal Isolation
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-7510-500E
      DescriptionThe HCPL-7510 isolated linear current sensing IC family is designed for current sensing in low-power electronic motor drives. In a typical implementation, motor current flows through an external resistor and the resulting analog voltage drop is sensed by the HCPL-7510. An output voltage is created on the other side of the HCPL-7510 optical isolation barrier. This single ended output voltage is proportional to the motor current. Since common-mode voltage swings of several hundred volts in tens of nanoseconds are common in modern switching inverter motor drives, the HCPL-7510 was designed to ignore very high common-mode transient slew rates (of at least 10 kV/µs).Features• 15 kV/µs common-mode rejection at Vcm = 1000 V• Compact, auto-insertable 8-pin DIP package• 60 ppm/°C gain drift vs. temperature• –0.6 mV input offset voltage• 8 µV/°C input offset voltage vs. temperature• 100 kHz bandwidth• 0.06% nonlinearity, single-ended amplifier output for low power application.• Worldwide safety approval: UL 1577 (3750 Vrms/1 min.), CSA and IEC/EN/DIN EN 60747-5-2 (Option 060 only)• Advanced sigma-delta (Σ-∆) A/D converter technologyApplications• Low-power inverter current sensing• Motor phase and rail current sensing• Switched mode power supply signal isolation• General purpose low-power current sensing and monitoring• General purpose analog signal isolation
      		OTHERIn StockNew Sealed Under Guarantee
      IC Chips
      HCPL-J312-500E
      DescriptionThe HCPL-3120 contains a GaAsP LED while the HCPL-J312 and the HCNW3120 contain an AlGaAs LED. The LED is optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices.Features• 2.5 A maximum peak output current• 2.0 A minimum peak output current• 25 kV/µs minimum Common Mode Rejection (CMR) at VCM = 1500 V• 0.5 V maximum low level output voltage (VOL) Eliminates need for negative gate drive• ICC = 5 mA maximum supply current• Under Voltage Lock-Out protection (UVLO) with hysteresis• Wide operating VCC range: 15 to 30 Volts• 500 ns maximum switching speeds• Industrial temperature range: -40°C to 100°C• SafetyApproval:UL Recognized3750 Vrms for 1 min. for HCPL-3120/J3125000 Vrms for 1 min. for HCNW3120CSA ApprovalIEC/EN/DIN EN 60747-5-2 ApprovedVIORM = 630 Vpeak for HCPL-3120 (Option 060)VIORM = 891 Vpeak for HCPL-J312VIORM = 1414 Vpeak for HCNW3120Applications• IGBT/MOSFET gate drive• AC/Brushless DC motor drives• Industrial inverters• Switch mode power supplies
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-V454-500E
      DescriptionThe HCPL-814 contains a phototransistor, optically coupled to two light emitting diodes connected inverse parallel. It can operate directly by AC input current. It is packaged in a 4-pin DIP package and available in widelead spacing option and lead bend SMD option. Inputoutput isolation voltage is 5000 Vrms. Response time, tr, is typically 4 µs and minimum CTR is 20% at input current of ±1 mA.Features• AC input response• High input-output isolation voltage (Viso = 5,000 Vrms)• Low collector dark current (ICEO: max. 10-7 A at VCE = 20 V)• Current transfer ratio (CTR: min. 20% at IF = ±1 mA, VCE = 5 V)• Response time (tr: typ. 4 µs at VCE = 2 V, IC = 2 mA, RL = 100 Ω)• Compact dual-in-line package• UL approved• CSA approved• IEC/EN/DIN EN 60747-5-2 approved• Options available:– Leads with 0.4" (10.16 mm) spacing (W00)– Leads bend for surface mounting (300)– Tape and reel for SMD (500)– IEC/EN/DIN EN 60747-5-2 approvals (060)Applications• Detecting or monitoring AC signals• AC line/digital logic isolation• Programmable logic controllers• AC/DC – input modules
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-M600-500E
      DescriptionThese small outline high CMR, high speed, logic gate opto coup lers are single channel devices in a five lead miniature foot print. They are electrically equivalent to the following Avago optocouplers (except there is no output enable feature):The SO-5 JEDEC registered (MO-155) package outline does not require “through holes” in a PCB. This package occupies approximately one fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be com patible with standard surface mount processes.The HCPL-M600/01/11 optically coupled gates combine a GaAsP light emitting diode and an integrated high gain photon detector. The output of the detector I.C. is an Open-collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 5,000 V/μs for the HCPL-M601, and 10,000 V/μs for the HCPL-M611.Features• Surface Mountable• Very Small, Low Profile JEDEC Registered Package Outline• Compatible with Infrared Vapor Phase Reflow and Wave Soldering Processes• Internal Shield for High Common Mode Rejection (CMR)HCPL-M601: 10,000 V/μs at VCM = 50 VHCPL-M611: 15,000 V/μs at VCM = 1000 V• High Speed: 10 Mbd• LSTTL/TTL Compatible• Low Input Current Capability: 5 mA• Guaranteed ac and dc Performance over Temperature: –40°C to 85°C• Safety and regulatory approvals:- UL recognized: 3750 Vac for 1 min. per U.L. (File No. 55361)- CSA component acceptance Notice #5- IEC/EN/DIN EN 60747-5-2 approved for HCPL-M601/M611 Option 060.• Lead Free OptionApplications• Isolated Line Receiver• Simplex/Multiplex Data Transmission• Computer-Peripheral Interface• Microprocessor System Interface• Digital Isolation for A/D, D/A Conversion• Switching Power Supply• Instrument Input/Output Isolation• Ground Loop Elimination• Pulse Transformer Replacement
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-7710-500E
      DescriptionAvailable in either an 8-pin DIP or SO-8 package style respectively, the HCPL-7710 or HCPL-0710 optocouplers utilize the latest CMOS IC technology to achieve outstanding performance with very low power consumption. The HCPL-x710 require only two bypass capacitors for complete CMOS compatibility.Basic building blocks of the HCPL-x710 are a CMOS LED driver IC, a high speed LED and a CMOS detector IC. A CMOS logic input signal controls the LED driver IC, which supplies current to the LED. The detector IC incorporates an integrated photodiode, a high-speed transimpedance amplifer, and a voltage comparator with an output driver.Features• +5 V CMOS compatibility• 8 ns maximum pulse width distortion• 20 ns maximum prop. delay skew• High speed: 12 Mbd• 40 ns maximum prop. delay• 10 kV/µs minimum common mode rejection• -40°C to 100°C temperature range• Safety and regulatory approvalsUL Recognized3750 Vrms for 1 min. per UL 15775000 Vrms for 1 min. per UL 1577 (for HCPL-7710 option 020)CSA Component Acceptance Notice #5IEC/EN/DIN EN 60747-5-5– VIORM = 630 Vpeak for HCPL-7710 Option 060– VIORM = 567 Vpeak for HCPL-0710 Option 060Applications• Digital feldbus isolation: DeviceNet, SDS, Profbus• AC plasma display panel level shifting• Multiplexed data transmission• Computer peripheral interface• Microprocessor system interface
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-V601-500E
      DescriptionThe HCPL-814 contains a phototransistor, optically coupled to two light emitting diodes connected inverse parallel. It can operate directly by AC input current. It is packaged in a 4-pin DIP package and available in widelead spacing option and lead bend SMD option. Inputoutput isolation voltage is 5000 Vrms. Response time, tr, is typically 4 µs and minimum CTR is 20% at input current of ±1 mA.Features• AC input response• High input-output isolation voltage (Viso = 5,000 Vrms)• Low collector dark current (ICEO: max. 10-7 A at VCE = 20 V)• Current transfer ratio (CTR: min. 20% at IF = ±1 mA, VCE = 5 V)• Response time (tr: typ. 4 µs at VCE = 2 V, IC = 2 mA, RL = 100 Ω)• Compact dual-in-line package• UL approved• CSA approved• IEC/EN/DIN EN 60747-5-2 approved• Options available:– Leads with 0.4" (10.16 mm) spacing (W00)– Leads bend for surface mounting (300)– Tape and reel for SMD (500)– IEC/EN/DIN EN 60747-5-2 approvals (060)Applications• Detecting or monitoring AC signals• AC line/digital logic isolation• Programmable logic controllers• AC/DC – input modules
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-810J-500E
      		OTHERIn StockNew Sealed Under Guarantee
      Special Purpose
      HCPL-4100-500E
      DescriptionThe HCPL-4100 optocoupler is designed to operate as a transmitter in equipment using the 20 mA current loop. 20 mA current loop systems conventionally signal a logic high state by transmitting 20 mA of loop current (MARK), and signal a logic low state by allowing no more than a few milliamperes of loop current (SPACE). Optical coupling of the signal from the logic input to the 20 mA current loop breaks ground loops and provides very high immunity to common mode interference.Features• Guaranteed 20 mA loop parameters• Data input compatible with LSTTL, TTL and CMOS Logic• Internal shield for High Common Mode rejection• 20 kBaud data rate at 400 metres line length• Guaranteed On and Off output current levels• Safety approvalUL Recognized -3750 V rms for 1 minuteCSA Approved• Optically coupled 20 mA current loop receiver, HCPL-4200, also availableApplications• Isolated 20 mA current loop transmitter in: Computer peripherals Industrial control equipment Data communications equipment
      		OTHERIn StockNew Sealed Under Guarantee
      HCPL-4200-500E
      DescriptionThe HCPL-4200 optocoupler is designed to operate as a receiver in equipment using the 20 mA Current Loop. 20 mA current loop systems conventionally signal a logic high state by transmitting 20 mA of loop current (MARK), and signal a logic low state by allowing no more than a few milliamperes of loop current (SPACE). Optical couFeaturesData output compatible with LSTTL, TTL and CMOS20 K Baud data rate at 1400 metres line lengthGuaranteed On and Off thresholdsLED is protected from excess currentInput threshold hysteresisThree-state output compatible with data busesInternal shield for high Common Mode RejectionSafety approval UL recognized -3750 V rms, for 1 minute CSA approvedOptically coupled 20 mA current loop transmitter, HCPL-4100, also availableApplicationsIsolated 20 mA currentLoop receiver in:Computer peripheralsIndustrial control equipmentData communications equipment
      		OTHERIn StockNew Sealed Under Guarantee
      Power Management IC
      HCPL-800J-500E
      		OTHERIn StockNew Sealed Under Guarantee
      0.745346s