All
      0
      Cart

      • OTHER

      • Popular
      • Newest
      • Most reviews

      Interface - Drivers, Receivers, Transceivers

      Interface - Drivers, Receivers, Transceivers
      ModelDescriptionBrandLeadingConditionPriceAction
      Interface - Drivers, Receivers, Transceivers
      EL1517ISZ
      The EL1517 is a dual operational amplifier designed for VDSL and ADSL line driving in DMT based solutions. This device features a high drive capability of 250mA while consuming only 7mA of supply current per amplifier and operating from a single 5V to 12V supply. This driver achieves a typical distortion of -80dBc, at 150kHz into a 25Ω load.The EL1517 is available in the industry-standard 8 Ld SOIC and the thermally-enhanced 16 Ld QFN packages. All are specified for operation over the full -40°C to +85°C temperature range. The 16 Ld QFN package option has control pins C0 and C1 for controlling the bias and enable/disable of the outputs. These controls allow for lowering the power to fit the performance/power ratio for the application.The EL1517 is ideal for ADSL, SDSL, HDSL2 and VDSL line driving applications.Features• Drives up to 250mA from a +12V supply• 18VP-P differential output drive into 50Ω• 20VP-P differential output drive into 100Ω• -80dBc typical driver output distortion at full output at 150kHz• -75dBc typical driver output distortion at 3.75MHz• -60dBc typical driver output distortion at 8MHz• -50dBc typical driver output distortion at 16MHz• Low quiescent current of 7mA per amplifier• 200MHz bandwidth• Use for single or dual supply applications• Pb-free plus anneal available (RoHS compliant)Applications• VDSL line drivers• ADSL full rate CPE line driving• G.SHDSL, HDSL2 line drivers• HomePlug networking drivers
      		OTHERIn StockNew Sealed Under Guarantee
      ISL83488IBZ
      3.3V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 TransceiversThese Intersil RS-485/RS-422 devices are BiCMOS 3.3V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Unlike competitive devices, this Intersil family is specified for 10% tolerance supplies (3V to 3.6V).The ISL83483 and ISL83488 utilize slew rate limited drivers which reduce EMI, and minimize reflections from improperly terminated transmission lines, or unterminated stubs in multidrop and multipoint applications.Features• Operate from a Single +3.3V Supply (10% Tolerance)• Interoperable with 5V Logic• High Data Rates. . . . . . . . . . . . . . . . . . . . . up to 10Mbps• Single Unit Load Allows up to 32 Devices on the Bus• Slew Rate Limited Versions for Error Free Data Transmission (ISL83483, ISL83488) . . . . . .up to 250kbps• Low Current Shutdown Mode (ISL83483, ISL83485, ISL83491). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15nA• -7V to +12V Common Mode Input Voltage Range• Three State Rx and Tx Outputs (Except ISL83488, ISL83490)• 10ns Propagation Delay, 1ns Skew (ISL83485, ISL83490, ISL83491)• Full Duplex and Half Duplex Pinouts• Current Limiting and Thermal Shutdown for driver Overload Protection• Pb-free availableApplications• Factory Automation• Security Networks• Building Environmental Control Systems• Industrial/Process Control Networks• Level Translators (e.g., RS-232 to RS-422)• RS-232 “Extension Cords”
      		OTHERIn StockNew Sealed Under Guarantee
      1.704138s