| STM32 F3 |
| | | OTHER | In Stock | New Sealed Under Guarantee | | |
| | | OTHER | In Stock | New Sealed Under Guarantee | | |
| | | OTHER | In Stock | New Sealed Under Guarantee | | |
| | | OTHER | In Stock | New Sealed Under Guarantee | | |
| | The STM32F302xD/E family is based on the high-performance ARM®Cortex®-M4 32-bit RISC core with FPU operating at a frequency of 72 MHz, and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). The family incorporates high-speed embedded memories (512-Kbyte Flash memory, 64-Kbyte SRAM), a flexible memory controller (FSMC) for static memories (SRAM, PSRAM, NOR and NAND), and an extensive range of enhanced I/Os and peripherals connected to an AHB and two APB buses.The devices offer two fast 12-bit ADCs (5 Msps), four comparators, two operational amplifiers, one DAC channel, a low-power RTC, up to two general-purpose 16-bit timers, one general-purpose 32-bit timer, and one timer dedicated to motor control. They also feature standard and advanced communication interfaces: up to three I2Cs, up to four SPIs (two SPIs are with multiplexed full-duplex I2Ss), three USARTs, up to two UARTs, CAN and USB. To achieve audio class accuracy, the I2S peripherals can be clocked via an external PLL.The STM32F302xD/E family operates in the -40 to +85°C and -40 to +105°C temperature ranges from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F302xD/E family offers devices in different packages ranging from 64 to 144 pins.Depending on the device chosen, different sets of peripherals are included.VDD, VDDAvoltage range: 2.0 V to 3.6 VMemoriesUp to 512 Kbytes of Flash memory64 Kbytes of SRAM, with HW parity check implemented on the first 32 Kbytes.Flexible memory controller (FSMC) for static memories, with four Chip SelectCRC calculation unitReset and supply managementPower-on/Power-down reset (POR/PDR)Programmable voltage detector (PVD)Low-power modes: Sleep, Stop and StandbyVBATsupply for RTC and backup registersClock management4 to 32 MHz crystal oscillator32 kHz oscillator for RTC with calibrationInternal 8 MHz RC with x 16 PLL optionInternal 40 kHz oscillatorUp to 115 fast I/OsAll mappable on external interrupt vectorsSeveral 5 V-tolerantInterconnect matrix12-channel DMA controllerTwo ADCs 0.20 μs (up to 18 channels) with selectable resolution of 12/10/8/6 bits, 0 to 3.6 V conversion range, separate analog supply from 2.0 to 3.6 V | OTHER | In Stock | New Sealed Under Guarantee | | |
| | | OTHER | In Stock | New Sealed Under Guarantee | | |
| | | OTHER | In Stock | New Sealed Under Guarantee | | |
| | | OTHER | In Stock | New Sealed Under Guarantee | | |
