| ZLAN |
| | SummaryZLAN5143I is a high reliability and high performance serial device server and Modbus Gateway product designed by Shanghai ZLAN special for lightning resistance, anti-electromagnetic interference and resisting bad environment requirements, is the flagship product on serial device server. Can be applied to industrial application requiring anti-jamming, anti-tunnel monitoring, wind power, field geological disasters monitoring and so on.ZLAN5143I has good interface isolation characteristic. The RS485/422 not only have ±15V antistatic, but also have 2500V interface isolation, as adding 2500V AC voltage between RS485 wire and shell, the current leakage into ZLAN5143 is less than 5 mA.The RS485 of ZLAN5143I can drive 256 load capacity, compared to the product driving 32 loads, it can achieve the ability of monitoring more equipment to save cost.ZLAN5143I has three interface types: RS232/485/422. The input voltage can provide DC Q2. 1 jack or terminal type, the input voltage is 18~36V (can be customized 12V). It can be equipped with guide installation accessories.FeaturesInterface insolation: the power can reach 3KV insolation voltage; RS485/422 can reach 2.5KV insolation voltage; ±15KV ESD protection function; More than 25KV/US high common mode transient suppression. RS485/422 has the ability of 256 loads. Three interface types: RS232/485/422. RS422 needs customized internal jumpers, should be informed before buying. Support 18~24V power supply, interface are DC Q2. 1 jack and terminal wiring. Can be customized 12V power input. Having both functions: serial device server with transparent transmission and Modus gateway. Under transparent transmission, support full duplex, high speed data forwarding, no packet loss; Modbus gateway use storage type, the speed is faster than general forwarding mode. Support TCP Server, TCP Client, UDP mode, UDP multicast. The baud rate support 1200~115200bps, the data bits support 5~9, check bits can be five types: None, Odd, Even, Mark, Space, support CTS/RTS hardware flo | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | SummaryZLAN5142I is a high reliability and high performance serial device server and Modbus Gateway product designed by Shanghai ZLAN special for lightning resistance, anti-electromagnetic interference and resisting bad environment requirements, is the flagship product on serial device server. Can be applied to industrial application requiring anti-jamming, anti-tunnel monitoring, wind power, field geological disasters monitoring and so on. ZLAN5142I has good interface isolation characteristic. The RS485/422 not only have ±15V antistatic, but also have 2500V interface isolation, as adding 2500V AC voltage between RS485 wire and shell, the current leakage into ZLAN5143 is less than 5 mA. The RS485 of ZLAN5142I can drive 256 load capacity, compared to the product driving 32 loads, it can achieve the ability of monitoring more equipment to save cost.ZLAN5142I has three interface types: RS232/485/422. The input voltage can provide DC Q2. 1 jack or terminal type, the input voltage is 18~36V (can be customized 12V). It can be equipped with guide installation accessories.FeaturesInterface insolation: the power can reach 3KV insolation voltage; RS485/422 can reach 2.5KV insolation voltage; ±15KV ESD protection function; More than 25KV/US high common mode transient suppression. RS485/422 has the ability of 256 loads. Three interface types: RS232/485/422. RS422 needs customized internal jumpers, should be informed before buying. Support 18~24V power supply, interface are DC Q2. 1 jack and terminal wiring. Can be customized 12V power input. Having both functions: serial device server with transparent transmission and Modus gateway. Under transparent transmission, support full duplex, high speed data forwarding, no packet loss; Modbus gateway use storage type, the speed is faster than general forwarding mode. Support TCP Server, TCP Client, UDP mode, UDP multicast. The baud rate support 1200~115200bps, the data bits support 5~9, check bits can be five types: None, Odd, Even, Mark, Space, support CTS/RTS hardware flow control. If need to support 460800bps, choose model ZLAN5142I. Rich single light: power, wiring connection, TCP connection, data activity. Support multiple TCP connection, as a TCP Server, can be connected with 40 clients. As a TCP Client, can connect with 8 different destination IP and port at the same time. Real COM Driver support multicomputer communication though the 9th (address frame is 1, data frame is 0). Support remotely searching 5143I and configuring parameters through internet, can upgrading procedure and downloading configuration Webpage through Ethernet port. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | ZLAN5143BI is an RS485/422 serial port serial server with isolation, which can effectively isolate the impact of interference on the RS485 bus on the working of the device and ensure the stability of the device. It is suitable for use in environments where RS485 bus interference is present. Built-in power lightning protection, 9~48V wide voltage. RS485/422 supports 256 loads. At the same time, ZLAN5143BI also has RS232 interface, non-opto-decoupled isolation. The ZLAN5143BI network port supports 10M/100M adaptive network. It can realize the conversion of TCP/IP protocol to RS485/422/232, which is convenient for data collection of serial port equipment through the network. The network terminal can use the virtual serial port to connect the serial port software or direct TCP/IP communication software. ZLAN5143BI supports the Modbus RTU to Modbus TCP conversion function and has the characteristics of a storage-based Modbus gateway. Of course, it can also be used as a non-storage Modbus gateway. ZLAN5143BI can be applied to:Power electronics, smart meters and energy consumption monitoring;As an IoT gateway as a communication bridge between devices and the cloud;Remote monitoring and program download of various types of automation PLC;All kinds of configuration software and equipment communication interfaces;Access control and security in the field of equipment networking;Networked information collection of medical equipment; A typical application connection is shown in the diagram. The original serial port device and the serial port connection of the ZLAN5143BI, 5143BI is connected to the computer through the network cable. The software on the computer establishes a connection with 5143BI through TCP/IP or virtual serial port. Thereafter, any data sent by the serial device will be transparently transmitted to the computer's software, and the data sent by the software to the ZLAN5143BI over the network will also be transparently transmitted to the serial device. Hardware features:RS485/422 serial port optocoupler isolation, isolation voltage 1500V. It is suitable for strong interference environments where ordinary serial port servers cannot work normally. Effectively isolate the ground circuit between the serial device and the serial server. Built-in power lightning protection: Built-in varistor and ceramic discharge tube can effectively protect the internal circuit of the serial server in the case of power surge. Industrial-grade power supply mode: It has two power supply wiring methods: terminal block and power plug, which is convenient for industrial use. It can be supplied with a wide voltage of 9~48V. It has RS232/485/422 serial interfaces. RS485/422 has a load capacity of 256. Network port 2KV surge protection. Abundant panel indicators for easy debugging: in terms of connection, there are not only 100M_LINK lights that indicate whether the network cable is connected well, but also LINK lights that indicate the establishment of TCP connections, and independent indicators of "serial port to network port" and "network port to serial port" in terms of data indicators. Convenient for on-site commissioning.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. When you are a TCP client, you can also support the TCP server-side function. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 1200~115200bps, the data bit supports 5~9 bits, and the check bit can be no check, odd check, even check, mark, and space, and supports CTS/RTS hardware flow control and XON/XOFF soft flow control. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, and also supports Modbus gateway in non-storage mode. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewThe ZLAN5143-232 is specially designed for the application field where RS232 needs to be isolated, effectively isolating interference between RS232 devices. The ZLAN5143-232 enables transparent data forwarding between RS232/485/422 and TCP/IP. It is convenient to connect serial port equipment to Ethernet and the Internet, and realize the network upgrade of serial port equipment. Support RS232/422 interface for full-duplex, uninterrupted communication, RS485/422 embedded 485/422 lightning protection, RS485/422 and RS232 can be used at the same time without switching. DHCP and DNS are supported. It supports virtual serial port, and the original serial port PC software does not need to be modified. ZLAN5143-232 converts Modbus TCP to Modbus RTU. ZLAN5143-232 is a new generation of high-performance serial server developed by Shanghai ZLAN based on ZLAN1003. It has the characteristics of strong function and high cost performance.PeculiaritySupports full-duplex, high-speed data forwarding without packet loss. Economical price TCP Server, TCP Client, UDP mode, and UDP multicast are supported. The baud rate supports 1200~115200bps, the data bit supports 5~9 bits, and the check bit can be None, odd check, even check, Mark, Space five modes, and supports CTS/RTS hardware flow control. Built-in 485/422 lightning protection for outdoor 485/422 communications. It is equipped with Windows virtual serial port & device management tool ZLVircom for free, supports virtual serial port, and can search for ZLAN5143-232 with one click and modify parameters. Provides a device management library (Windows DLL dynamic link library) to facilitate users to develop applications with VC, VB, Delphi, and C++Builder. Users only need to use read, write, and other interface functions to communicate with ZLAN5143-232. The innovative network disconnection detection mechanism can automatically re-establish the connection after the ZLAN5143-232 works in TCP Server mode or TCP Client mode, ensuring real-time data accessibility. Built-in web server, module parameters can be modified via a browser. DHCP is supported to solve IP management and IP conflict problems. DNS is supported to meet the requirements for communication through domain names. Supports up to 30 TCP connections to communicate with networking modules at the same time. When you are a TCP client, you can connect to 8 destination IPs. Flexible serial port data framing settings to meet various subcontracting needs of users. UDP mode supports dynamic destination mode, which is convenient for multiple users to manage the same networking module at the same time. Real COM Driver supports multi-machine communication via bit 9 (address frame 1 and data frame 0). Supports remote Internet discovery of ZLAN5143-232 and configuration of ZLAN5143-232 parameters. Parameter write-protection is supported to prevent accidental modification. The default parameter startup function is supported. 2KV level network port surge protection. High strength against electromagnetic interference, with radiation-resistant SECC plates in the housing. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5143D is an RS485 device data collector/IoT gateway specially designed for industrial environments, which has multiple functions such as serial server, Modbus gateway, MQTT gateway, RS485 to JSON and so on. It has an RS485 interface and an Ethernet interface. It adopts the guide rail type installation method, which is small in size and easy to install. Terminal type power supply is used, and the voltage input is 9~24V. Since there is only an RS485 interface, the RS232 interface that is not commonly used on industrial instruments is canceled, which saves cost and volume, and has a higher cost performance compared with ordinary products. Now ZLAN5143D launched the black model, the black model adopts a high-temperature flame-retardant shell, the shell is not deformed at a high temperature of 110 degrees, does not support combustion, and is extinguished immediately after leaving the fire source. New customers are recommended to choose the black version of the 5143D.When used as an ordinary serial port server, the network port of 5143D is connected to the Ethernet, and the host computer software can use TCP/UDP transparent transmission mode or virtual serial port mode to send data to the RS485 interface of 5143D, and the data received on the RS485 interface will also be transmitted to the software or virtual serial port of the TCP end. In the virtual serial port mode, the serial port software connected to the virtual serial port can be used without need. When used as a Modbus gateway, the 5143D supports Modbus TCP to Modbus RTU, so that the host computer can use the Modbus TCP protocol to collect data from RS485 Modbus RTU devices. Conversely, if the RS485 side is used as a master, it can also be used. The 5143D supports advanced Modbus gateway functions, including configurable Modus gateway ZLMB and storage Modbus gateway, which fully meets the various configurations and usage of Modbus gateways. Its multi-master capability allows multiple computer masters to access an RS485 slave at the same time. When used as an MQTT gateway, the device can upload serial port data to the MQTT server using the MQTT protocol in transparent transmission mode, and the supported servers include Baidu Cloud MQTT, Alibaba Cloud MQTT, and China Mobile OneNet platform. The collected Modbus RTU or non-standard serial port data can be parsed into JSON format and encapsulated in MQTT packets for upload. Support JSON format upload and collect data, automatic data collection, data collection support Modbus RTU, 645 instrument 97 version, 645 instrument 07 version, various non-standard RS485 protocols. Users can use ZLVircom to configure the uploaded data format and JSON keywords. MQTT protocol, HTTP POST protocol, HTTP GET protocol, transparent transmission protocol, and various non-standard network protocols can be supported during upload. ZLAN5143D has all kinds of functions of powerful IoT gateway, which is very suitable for the collection of various RS485 meters and sensors in the industrial field, including the collection of local networks or the independent collection and transmission of upload to cloud servers. ZLAN5143D can be applied to: As an IoT gateway, it acts as a communication bridge between devices and the cloud; Power, smart meters, and energy consumption monitoring; Remote monitoring and program download of various types of automated PLCs; All kinds of configuration software and equipment communication interfaces; Access control and security equipment networking;Peculiarity Hardware features:Din rail design: suitable for internal installation of cabinets in industrial fields. Small size: Compared with ordinary serial servers, the width is small and does not take up space. Terminal power supply, 9~24V wide voltage input, with reverse power supply protection. Terminal RS485 interface, support 32 slave devices, baud rate support 300~115200bps. Abundant panel indicators for easy debugging: In terms of connection, there are not only LINK lights that indicate whether the network cable is connected, but also LINK lights that indicate the establishment of TCP connections, and independent indicators of "serial port to network port" and "network port to serial port" in terms of data indicators.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. As a TCP client, it also supports TCP server-side functions. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 1200~115200bps, the data bit supports 5~9 bits, and the check bit can be no check, odd check, even check, mark, and space. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, Modbus gateway in non-storage mode, and Modbus gateway function of ZLMB configurable table. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. The MQTT gateway function is supported. It supports JSON to Modbus RTU and 645 meter protocols, and supports HTTP POST AND HTTP GET formats to upload data. Support NTP protocol to obtain network time, which is used for serial port output, and the latter is used for protocol content uploading. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5103K is an RS232 device data collector/IoT gateway specially designed for industrial environments, with serial server, Modbus gateway, MQTT gateway, RS232 to JSON and other functions in one. It has an RS232 interface and an Ethernet interface. It supports rail-type installation or desktop screw hole installation, which is compact and easy to install. Terminal type power supply is used, and the voltage input is 9~24V. It saves cost and volume, and has a higher cost performance compared with ordinary products. When used as an ordinary serial port server, the network port of 5103K is connected to the Ethernet, and the host computer software can use TCP/UDP transparent transmission mode or virtual serial port mode to send data to the RS232 interface of 5103K, and the data received on the RS232 interface will also be transmitted to the software or virtual serial port on the TCP end. In the virtual serial port mode, the serial port software connected to the virtual serial port can be used without need. When used as a Modbus gateway, the 5103K supports Modbus TCP to Modbus RTU, so that the host computer can use the Modbus TCP protocol to collect data from RS232 Modbus RTU devices. Conversely, if the RS232 side is used as a master, it can also be used. The 5103K supports advanced Modbus gateway functions, including configurable Modus gateway ZLMB and storage Modbus gateway, which fully meets the various configurations and usage of Modbus gateways. Its multi-master capability allows multiple computer masters to access an RS232 slave at the same time. When used as an MQTT gateway, the device can upload serial port data to the MQTT server using the MQTT protocol in transparent transmission mode, and the supported servers include Baidu Cloud MQTT, Alibaba Cloud MQTT, and China Mobile OneNet platform. The collected Modbus RTU or non-standard serial port data can be parsed into JSON format and encapsulated in MQTT packets for upload. Support JSON format upload of collected data, automatic data collection, data collection support Modbus RTU, 645 instrument 97 version, 645 instrument 07 version, various non-standard RS232 protocols. Users can use ZLVircom to configure the uploaded data format and JSON keywords. MQTT protocol, HTTP POST protocol, HTTP GET protocol, transparent transmission protocol, and various non-standard network protocols can be supported during upload. Among them, ZLAN5103KN model supports P2P networking, which does not need to be transferred through the server and connects to the device through ID. ZLAN5103K has all the functions of a powerful IoT gateway, which is very suitable for the collection of various RS232 meters and sensors in the industrial field, including the collection of local networks or the independent collection and transmission of uploads to cloud servers. ZLAN5103K can be applied to: As an IoT gateway, it acts as a communication bridge between devices and the cloud; Power, smart meters, and energy consumption monitoring; Remote monitoring and program download of various RS232 interface automation PLCs; RS232 interface for various configuration software and equipment communication; Access control and security equipment networking; A typical application connection is shown in Figure 3. The original serial port device RS232 and the ZLAN5103K RS232 port are connected, and the 5103K is connected to the computer through a network cable. The software on the computer establishes a connection with the 5103K through TCP/IP or virtual serial port. Thereafter, any data sent by the serial device will be transparently transmitted to the computer's software, and the data sent by the software to the ZLAN5103K over the network will also be transparently transmitted to the serial device. Peculiarity Hardware features:Multi-mounting design: support panel mounting/rail mounting. Small size: Compared with ordinary serial servers, the width is small and does not take up space. Terminal power supply, 9~24V wide voltage input, with reverse power supply protection. Terminal RS232 interface, baud rate supports 300~921600bps. It has RS232 hardware interface protection. Abundant panel indicators for easy debugging: In terms of connection, there are not only LINK lights that indicate whether the network cable is connected, but also LINK lights that indicate the establishment of TCP connections, and independent indicators of "serial port to network port" and "network port to serial port" in terms of data indicators.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. When acting as a TCP client, it also supports TCP server-side functions. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 300~921600bps, the data bit supports 7~8 bits, and the check bit can be no check, odd check, even check, mark, and space. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, Modbus gateway in non-storage mode, and Modbus gateway function of ZLMB configurable table. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. The MQTT gateway function is supported. It supports JSON to Modbus RTU and 645 meter protocols, and supports HTTP POST AND HTTP GET formats to upload data. Support NTP protocol to obtain network time, which is used for serial port output, and the latter is used for protocol content uploading. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5143K is an RS485 device data collector/IoT gateway specially designed for industrial environments, which has multiple functions such as serial server, Modbus gateway, MQTT gateway, RS485 to JSON and so on. It has an RS485 interface and an Ethernet interface. It supports rail-type installation or desktop screw hole installation, which is compact and easy to install. Terminal type power supply is used, and the voltage input is 9~24V. It saves cost and volume, and has a higher cost performance compared with ordinary products. When used as an ordinary serial port server, the network port of 5143K is connected to the Ethernet, and the host computer software can use TCP/UDP transparent transmission mode or virtual serial port mode to send data to the RS485 interface of 5143K, and the data received on the RS485 interface will also be transmitted to the software or virtual serial port on the TCP side. In the virtual serial port mode, the serial port software connected to the virtual serial port can be used without need. When used as a Modbus gateway, the 5143K supports Modbus TCP to Modbus RTU, so that the host computer can use the Modbus TCP protocol to collect data from RS485 Modbus RTU devices. Conversely, if the RS485 side is used as a master, it can also be used. The 5143K supports advanced Modbus gateway functions, including configurable Modus gateway ZLMB and storage Modbus gateway, fully meeting the various configurations and usage of Modbus gateways. Its multi-master capability allows multiple computer masters to access an RS485 slave at the same time. When used as an MQTT gateway, the device can upload serial port data to the MQTT server using the MQTT protocol in transparent transmission mode, and the supported servers include Baidu Cloud MQTT, Alibaba Cloud MQTT, and China Mobile OneNet platform. The collected Modbus RTU or non-standard serial port data can be parsed into JSON format and encapsulated in MQTT packets for upload. Support JSON format upload and collect data, automatic data collection, data collection support Modbus RTU, 645 instrument 97 version, 645 instrument 07 version, various non-standard RS485 protocols. Users can use ZLVircom to configure the uploaded data format and JSON keywords. MQTT protocol, HTTP POST protocol, HTTP GET protocol, transparent transmission protocol, and various non-standard network protocols can be supported during upload. Among them, ZLAN5143KN model supports P2P networking, which does not need to be transferred through the server, and connects the device through ID. ZLAN5143K has all kinds of functions of powerful IoT gateways, which is very suitable for the collection of various RS485 meters and sensors in the industrial field, including the collection of local networks or the independent collection and transmission of uploads to cloud servers. ZLAN5143D can be applied to: As an IoT gateway, it acts as a communication bridge between devices and the cloud; Power, smart meters, and energy consumption monitoring; Remote monitoring and program download of various RS485 interface automation PLCs; RS485 interface for various configuration software and equipment communication; Access control and security equipment networking; A typical application connection is shown in Figure 2. The original serial port device RS485 and the ZLAN5143K RS485 port are connected, and the 5143K is connected to the computer through a network cable. The software on the computer establishes a connection with the 5143K through TCP/IP or virtual serial port. Thereafter, any data sent by the serial device is transparently transmitted to the computer's software, and the data sent by the software to the ZLAN5143K over the network is transparently transmitted to the serial device. Peculiarity Hardware features:Multi-mounting design: support panel mounting/rail mounting. Small size: Compared with ordinary serial servers, the width is small and does not take up space. Terminal power supply, 9~24V wide voltage input, with reverse power supply protection. Terminal RS485 interface, support 32 slave devices, baud rate support 300~115200bps. Abundant panel indicators for easy debugging: In terms of connection, there are not only LINK lights that indicate whether the network cable is connected, but also LINK lights that indicate the establishment of TCP connections, and independent indicators of "serial port to network port" and "network port to serial port" in terms of data indicators.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. As a TCP client, it also supports TCP server-side functions. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 1200~115200bps, the data bit supports 5~9 bits, and the check bit can be no check, odd check, even check, mark, and space. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, Modbus gateway in non-storage mode, and Modbus gateway function of ZLMB configurable table. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. The MQTT gateway function is supported. It supports JSON to Modbus RTU and 645 meter protocols, and supports HTTP POST AND HTTP GET formats to upload data. Support NTP protocol to obtain network time, which is used for serial port output, and the latter is used for protocol content uploading. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5107 is an RS232/485/422 device data collector/IoT gateway specially designed for industrial environments, which has multiple functions such as serial server, Modbus gateway, MQTT gateway, RS232/485/422 to JSON and so on. It has 3 interfaces: RS232/485/422 (choose one to use) and one Ethernet interface. It supports desktop screw hole installation and is easy to install. It is powered by terminal type power supply/5.5MM round hole adapter, and the voltage input is 9~24V. Compared with ordinary serial servers, it has a higher cost performance.When used as an ordinary serial port server, connect the network port of 5107 to the Ethernet, and the host computer software can use TCP/UDP transparent transmission mode or virtual serial port mode to send data to the serial port of 5107, and the data received on the serial port will also be transmitted to the software or virtual serial port on the TCP side. In the virtual serial port mode, the serial port software connected to the virtual serial port can be used without need. When used as a Modbus gateway, the 5107 supports Modbus TCP to Modbus RTU, so that the host computer can use the Modbus TCP protocol to collect data from RS232/485/422 Modbus RTU devices. Conversely, if the serial port end is used as a master, it can also be used. The 5107 supports advanced Modbus gateway functions, including configurable Modus gateway ZLMB and storage Modbus gateway, which fully meets the various configurations and usage of Modbus gateways. Its multi-master function allows multiple computer masters to access a slave device with an RS232/485/422 serial port at the same time. When used as an MQTT gateway, the device can upload serial port data to the MQTT server using the MQTT protocol in transparent transmission mode, and the supported servers include Baidu Cloud MQTT, Alibaba Cloud MQTT, and China Mobile OneNet platform. The collected Modbus RTU or non-standard serial port data can be parsed into JSON format and encapsulated in MQTT packets for upload. Support JSON format upload of collected data, automatic data collection, data collection support Modbus RTU, 645 instrument 97 version, 645 instrument 07 version, can customize various non-standard serial port protocols. Users can use ZLVircom to configure the uploaded data format and JSON keywords. When uploading, it can support MQTT protocol, HTTP POST protocol, HTTP GET protocol, transparent transmission protocol, and various non-standard network protocols can be customized. ZLAN5107 has all the functions of a powerful IoT gateway, which is very suitable for the collection of various serial instruments and sensors in the industrial field, including the collection of local networks or the independent collection and transmission of uploads to cloud servers.PeculiarityIndustrial-grade power supply mode: It has two power supply wiring methods: terminal block and power plug, which is convenient for industrial use. It can be supplied with a wide voltage of 9~24V. It has RS232/485/422 serial interfaces. You can choose one to use. Network port 2KV surge protection. Abundant panel indicators for easy debugging: In terms of connection, there are not only LINK lights that indicate whether the network cable is connected, but also LINK lights that indicate the establishment of TCP connections, and independent indicators of "serial port to network port" and "network port to serial port" in terms of data indicators. TCP server, TCP client, UDP mode, and UDP multicast are supported. When acting as a TCP client, it also supports TCP server-side functions. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 300~921600bps, the data bit supports 7~8 bits, and the check bit can be no check, odd check, even check, mark, and space. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function. It supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, Modbus gateway in non-storage mode, and Modbus gateway function of ZLMB configurable table. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. The MQTT gateway function is supported. It supports JSON to Modbus RTU and 645 meter protocols, and supports HTTP POST AND HTTP GET formats to upload data. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5102 serial server is a protocol converter between RS232/485 and TCP/IP developed by Shanghai ZLAN Information Technology Co., Ltd. The serial server can easily connect the serial port device to Ethernet and the Internet, and realize the network upgrade of the serial port device. ZLAN5102 is a typical serial server that has been running stably for 7 years since it was launched in 2011. Its distinctive feature is stable performance and high cost performance. RS485 has embedded 485 ESD protection, RS485 and RS232 can be used at the same time without switching. It supports DHCP and DNS, which can easily realize remote device monitoring in different places. Support virtual serial port, the original serial port PC software does not need to be modified. Supports high baud rate of 460800bps.PeculiaritySupports full-duplex, high-speed data forwarding without packet loss. ZLAN5102 supports users to send large batches of data at the same time on the serial port and network port without pause and data loss. TCP server, TCP client, UDP mode, and UDP multicast are supported. The baud rate supports 1200~460800bps, the data bit supports 5~9 bits, and the check bit can be None, odd check, even check, Mark, Space five ways, and supports CTS/RTS hardware flow control and software flow control. It is equipped with Windows virtual serial port & device management tool ZLVircom for free, which supports virtual serial port, and can search for ZLAN5102 and modify parameters with one click. Provides a device management library (Windows DLL dynamic link library) to facilitate users to develop applications with VC, VB, Delphi, and C++Builder. The innovative network disconnection detection mechanism can automatically re-establish the connection after the network is disconnected, regardless of whether the ZLAN5102 is working in TCP Server mode or TCP Client mode, ensuring real-time data accessibility. Built-in web server, module parameters can be modified through the browser. DHCP is supported to solve IP management and IP conflict problems. DNS is supported to meet the requirements for communication through domain names. As a TCP server, it supports up to 10 TCP connections to communicate with the networking module at the same time. If you want to connect to multiple destination IP addresses as a TCP client, select the ZLAN5102-MDIP model. The UDP mode supports the dynamic destination address mode, which is convenient for multiple users to manage the same networking module at the same time. Real COM Driver supports multi-machine communication via bit 9 (address frame is 1 and data frame is 0). Supports remote search for ZLAN5102 and configuration ZLAN5102 parameters over the Internet. 2KV network port surge protection. It supports the function of sending MAC addresses on the connection, which is convenient for the cloud to identify the device ID. The power supply can be either plug-in or terminal (specify when ordering). High strength anti-electromagnetic interference, the housing adopts radiation-resistant SECC board. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5144J is the MQTT+JSON to Modbus gateway launched by Shanghai ZLAN. It supports connecting to the cloud server in the form of MQTT, and supports interface phone configuration, independently collects the data of Modbus meter/645 meter, and converts it into JSON format and sends it to the cloud server. Supports about 100 collection data points. At the same time, it has a serial server and a Modbus gateway that can be used as a normal transparent transmission. Supports 1 Ethernet interface. RS232/485/422 serial port. The high-quality power supply design with a wide voltage of 9~24V provides better adaptability to the industrial environment, and the rail mounting accessories that can be equipped are suitable for rail installation. It integrates the Modbus TCP gateway function, which can easily realize the conversion of Modbus RTU protocol to Modbus TCP protocol. RS232 interface supports full-duplex, uninterrupted communication, RS485 embedded 485 lightning protection. For users who use virtual serial port, ZLANZ ZLVircom software can be used to realize virtual serial port, and the original serial port PC software does not need to be modified. It is also possible to use the Modbus TCP protocol in the configuration software to directly connect to the RTU device for network communication. ZLAN5144J can be applied to: PLC remote wireless monitoring; Power electronics, smart meters; Banking/medical automation systems; Securities trading systems; Industrial automation systems; A typical application connection is shown in the diagram. The original serial port device and ZLAN5144 connection convert the data of the instrument into JSON format and transmit it to the cloud through independent collection. Peculiarity Generic software featuresWide voltage power supply: 9~24V power supply range. Power input mode optional: you can choose the power supply mode of industrial terminal block or the plug mode of ordinary power adapter. Support RS232/RS485/RS422 three serial port forms. Hardware fluidics CTS/RTS and software fluidics XON/XOFF are supported. Sticky packet optimization, serial port framing real-time performance. Support the upgrade process in the system through the network port. There are four types of LINK indicator interfaces: LINK blue indicates that the TCP connection is established, and LINK green indicates that the Ethernet network cable is connected. Abundant indicators can visually display the status of the device. One-click search for configurations. Network port search: Use ZLAN's ZLVircom tool to find the module immediately and configure the network and serial port parameters. DNS resolution is supported, and it can be used as a DHCP client or as a DHCP server when it is used as an AP. TCPServer, TCP Client, UDP, and UDP multicast are supported. As a server, it supports up to 100 TCP connections to communicate with the networking module at the same time, and can connect to 8 destination IPs when it is a client. It supports sending MAC addresses on device connections, which is convenient for cloud management. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, and also supports Modbus gateway in non-storage mode. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5212DI is a serial server/IoT gateway with RS485 opto-decoupling isolation specially designed for industrial environments, which can effectively isolate the impact of interference on the RS485 bus on the working of the device and ensure the stability of the device. It is suitable for use in environments where RS485 bus interference is present. 9~24V wide voltage, terminal type power connection, with shell grounding wire. The 5212DI has two RS485 ports and one Ethernet port. It comes with hanging ears and rail buckles, supports 3 installation methods, is compact and easy to install. The 2-way serial port (PORT) of the 5212DI can use the same IP address, and different serial ports can be distinguished by the port, or each serial port can use a different IP address. This design increases flexibility and manageability, both by conserving IP resources through shared addresses and by enabling independent network communication through different IP addresses. ZLAN5212DI supports 2-bit stop bits, supports less than 8-bit data bits (e.g., 7-bit data has 1 stop bit), and supports up to 921.6Kbps baud rate. ZLAN5212DI can realize the conversion of 2 channels TCP/IP protocol to RS485, and the 2 channels work at the same time and can be configured for different baud rates. The data collection of 485 devices can be realized through the network, and the network terminal can use the virtual serial port to connect the serial port software or the software of direct TCP/IP communication. ZLAN5212DI supports transparent transmission and Modbus RTU to Modbus TCP functions, has the characteristics of a storage Modbus gateway, and also supports the MQTT protocol. It supports MODBUS RTU and 645 protocol to JSON and sends it regularly through MQTT/HTTP POST. ZLAN5212DI can be applied to: Power electronics, smart meters and energy monitoring; As an IoT gateway, it acts as a communication bridge between devices and the cloud; Remote monitoring and program download of various types of automated PLCs; All kinds of configuration software and equipment communication interfaces; Access control and security equipment networking; networked information collection of medical equipment; A typical application connection is shown in Figure 2. The original serial port device RS485 is connected to the RS485 port of the ZLAN5212DI, and the 5212DI is connected to the computer through the network cable. The software on the computer establishes a connection with the 5212DI through TCP/IP, virtual serial port, or cloud server. Thereafter, any data sent by the serial device is transparently transmitted to the computer's software, and the data sent by the software to the ZLAN5212DI over the network is transparently transmitted to the serial device. Peculiarity Hardware features:There are three ways to choose from rail mounting, backplate mounting ear mounting, and desktop mounting ear fixing. It is especially suitable for industrial guide rail installation, which can save installation space due to the narrow transverse width, and is more convenient for installation and disassembly. Industrial-grade power supply mode: terminal block wiring mode, convenient for industrial use. It can be supplied with a wide voltage of 9~24V. With enclosure grounding wire, effective diversion of disturbances and surges. RS485 serial port optocoupler isolation, isolation voltage 1500V. It is suitable for strong interference environments where ordinary serial port servers cannot work normally. Effectively isolate the ground circuit between the serial device and the serial server. Abundant panel indicators for easy debugging: in terms of connection, there are not only NET lights that indicate whether the network cable is connected well, but also LINK lights that indicate the establishment of TCP connections, and independent indicators of "serial port to network port" and "network port to serial port" in terms of data indicators. Convenient for on-site commissioning.Software features:The 2-way serial port can be configured for different baud rates, working independently and without interfering with each other. Support IP "doppelganger" technology: 2 serial ports can be distinguished by port or IP. Port differentiation: two IPs can be merged into one IP, different ports are suitable for networks lacking IPs, and IP differentiation: one IP becomes two IPs with the same port, which is suitable for applications with a fixed port number (for example, port 502 of Modbus TCP needs to be fixed). TCP server, TCP client, UDP mode, and UDP multicast are supported. When acting as a TCP client, it also supports TCP server-side functions. Supports up to 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. Support virtual serial port, equipped with Windows virtual serial port & device management tool ZLVircom. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addressesAdvanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, Modbus gateway in non-storage mode, and Modbus gateway function of ZLMB configurable table. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. It is also possible to implement multi-host applications from one serial port to multiple serial ports. The MQTT gateway function is supported. It supports Modbus RTU, Modbus TCP and 645 meter to JSON protocols, and supports HTTP POST AND HTTP GET formats to upload data. Support NTP protocol to obtain network time, which is used for serial port output, and the latter is used for protocol content uploading. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5207M is an RS485 device data collector/IoT gateway specially designed for industrial environments, with multiple functions such as serial port server, Modbus gateway, MQTT gateway, RS485 to JSON and so on. It has 2 RS485 interfaces and one Ethernet interface. It adopts the guide rail type installation method, which is easy to install. Compared with traditional desktop 2 serial servers, the width is reduced to about 1/4 of the original, and the size is small. Terminal type power supply is used, and the voltage input is 9~24V. The ZLAN5207M adopts a high-temperature flame-retardant alloy plastic shell, which has high-temperature resistance characteristics compared with ordinary plastic shells, and does not deform in the measured environment of 110°C. ZLAN5207M has industrial-grade high and low temperature operating temperature range, and has passed EMC tests such as electrostatic, group pulse, and surge. The work is stable and reliable. When used as an ordinary serial port server, connect the network port of 5207M to the Ethernet, and the host computer software can use TCP/UDP transparent transmission mode or virtual serial port mode to send data to the RS485 interface of 5207M, and the data received on the RS485 interface will also be transmitted to the software on the TCP side. In the virtual serial port mode, the serial port software connected to the virtual serial port does not need to be modified, and only the virtual serial port of ZLVircom needs to be opened. When used as a Modbus gateway, the 5207M supports Modbus TCP to Modbus RTU, so that the host computer can use the Modbus TCP protocol to collect data from RS485 Modbus RTU devices. Conversely, if the RS485 side is used as a master, it can also be used. The 5207M supports more advanced Modbus gateway functions, including configurable Modus gateway ZLMB and storage Modbus gateway, which fully meets the various configurations and usage of Modbus gateways. Its multi-master capability allows multiple computer masters to access an RS485 slave at the same time. When used as an MQTT gateway, the device can upload serial port data to the MQTT server using the MQTT protocol in transparent transmission mode, and the supported servers include Baidu Cloud MQTT, Alibaba Cloud MQTT, and China Mobile OneNet platform. The collected Modbus RTU or non-standard serial port data can be parsed into JSON format and encapsulated in MQTT packets for upload. The collected data can be uploaded in JSON format and automatically collected. The collected data supports Modbus RTU, 645 instrument 97 version, 645 instrument 07 version, various non-standard RS485 protocols, Modbus TCP, etc. Users can use ZLVircom to configure the uploaded data format and JSON keywords. MQTT protocol, HTTP POST protocol, HTTP GET protocol, transparent transmission protocol, and various non-standard network protocols can be supported during upload. ZLAN5207M has a reset button to reset parameters in case of JSON formatting. It supports edge computing functions, including: data overrun alarm, data translation and zoom, data change upload, device offline alarm, device independent collection, device automatic connection and other functions. This feature is usually used in conjunction with the JSON feature. In addition ZLAN5207MN model supports P2P networking, no need to relay through the server, and connect the device through ID. ZLAN5207M has all kinds of functions of powerful IoT gateways, which is very suitable for the collection of various RS485 meters and sensors in the industrial field, including the collection of local networks or the independent collection and transmission of uploads to cloud servers. ZLAN5207M can be applied to:As an IoT gateway, as a communication bridge between devices and the cloud; Electricity, smart meters and energy consumption monitoring; Remote monitoring and program download of various types of automated PLC; All kinds of configuration software and equipment communication interface; Access control and security in the field of equipment networking;A typical application connection is shown in Figure 2. The original serial port device RS485 is connected to the RS485 port of the ZLAN5207M, and the 5207M is connected to the computer through the network cable. The software on the computer establishes a connection with the 5207M through TCP/IP, virtual serial port, or cloud server. Thereafter, any data sent by the serial device will be transparently transmitted to the computer's software, and the data sent by the software to the ZLAN5207M over the network will also be transparently transmitted to the serial device. Peculiarity Hardware features:1. Rail design: suitable for internal installation of cabinets in industrial fields. 2. Small size: Compared with ordinary serial servers, the width is small and does not take up space. 3. With reset button: easy to reset parameters, recovery when JSON format is wrong. 4. Terminal power supply, 9~24V wide voltage input, with reverse power supply protection. Built-in resettable fuse and pressure-sensitive protection against surges. 5. Terminal RS485 interface, support 32 slave devices, baud rate support 300~921.6kbps. 6. Abundant panel indicators for easy debugging: in terms of connection, there is a LINK light that indicates the establishment of TCP connection, and there is a data activity indicator in terms of data indicator.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. When acting as a TCP client, it also supports TCP server-side functions. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 300~921.6bps, and the custom baud rate is supported. The data bit supports 5~9 bits, and the check bit can be no check, odd check, even check, mark, and space. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, Modbus gateway in non-storage mode, and Modbus gateway function of ZLMB configurable table. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. It is also possible to implement multi-host applications from one serial port to multiple serial ports. The MQTT gateway function is supported. It supports JSON to Modbus RTU, Modbus TCP and 645 meter protocols, and supports HTTP POST AND HTTP GET formats to upload data. Support NTP protocol to obtain network time, which is used for serial port output, and the latter is used for protocol content uploading. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | SummaryZLAN5200 serial device server is a 2 ports protocol converter between RS232/485/422 and TCP/IP developed by Shanghai ZLAN. ZLAN5200 support 2 RS232 ports, 2 RS422/485 ports, can realize 2 serial ports simultaneous full-duplex working through connecting to ZLAN5200 via a cable. The RS485 interface is green terminal interface, the RS232/RS485 are RJ45 Ethernet port connection interface. ZLAN can equip RJ45 to DB9 cable, 2 such line connecting to 2 RJ45 RS232 interface can lead out 2 DB9 male RS232 splice. Also 5200 provide an extra Ethernet interface, can be used as switch or cascade. ZLAN5200 support extending to 4/6/8 ports through cascade Ethernet port. 5200 provide 2 power connecting methods of power plug and terminal, wide range voltage, as well provide shell grounding protection. FeatureSupport full duplex, high speed converting, and no packet lost. Hight cost performance. Support TCP Server, TCP Client, UDP mode, and if communicating with ZLVirCom (our software), it automatically change to Real Com Driver Mode. Support band rate 1200~460800bps, data size 5~9bits, parity of None, Odd, Even, Mark, Space. Support CTS/RTS hardware flow control. Embedded with 485 lightning protection function. Equipped freely with our Windows Virtual Serial & Device Management Tool ZLVirCom. It supports virtual serial and searching device or modifying parameters with ZLVircom. Provide device management library (Window DLL library). It will help user to develop program with VC, VB, Delphi, C++ Builder. User need only use read() or write() function to communicate with ZLAN5200. The innovative disconnecting detecting method. Whether it running in TCP Server mode or TCP Client mode, once network is disconnected by some reason, the disconnecting detecting method will detected it and reestablished the connecting. Suitable for Modbus RTU networking upgrading. It is compatible with the software of SCADA/HMI software of Beijing Sunway ForceControl Technology Co. Ltd; Also it support directly transform Modbus TCP to Modbus RTU. With build-in Web server, its parameters can be modified by web browser. Support DHCP, easy for IP management and solve IP confliction. Support DNS. It fulfills the need of access data server through domain name. Support up to 100 TCP connections communicate with network modules at the same time. Flexible serial data framing setting. It fulfills all kinds of serial data frame requirement. UDP mode support dynamic destination address mode. It helps for multi-user mange one serial server. Real Com Driver mode support using the 9-th bit to facilitate communication with milt-device. (the 9-th bit being 0 means data frame and 1 means address frame). Support searching serial servers and modifying parameters through Internet remotely. Support parameter modifying protection, preventing modifying by accident. Support running with default parameters. Build-in 2 KV electrical plus protection in RJ45. High protection of electromagnetic interference, with its high electromagnetic interference protection SECC external shell. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5407M is an RS485 device data collector/IoT gateway specially designed for industrial environments, which has multiple functions such as serial server, Modbus gateway, MQTT gateway, RS485 to JSON and so on. It has 4 RS485 interfaces and one Ethernet interface. It adopts the guide rail type installation method, which is easy to install. Compared with the traditional desktop 4 serial server, the width is reduced to about 1/4 of the original, and the size is small. Terminal type power supply is used, and the voltage input is 9~24V. The ZLAN5407M adopts a high-temperature flame-retardant alloy plastic shell, which has high-temperature resistance characteristics compared with ordinary plastic shells, and does not deform in the measured environment of 110°C. ZLAN5407M has industrial-grade high and low temperature operating temperature range, and has passed EMC tests such as electrostatic, swarm pulse, and surge. The work is stable and reliable. When used as an ordinary serial port server, connect the network port of 5407M to the Ethernet, and the host computer software can use TCP/UDP transparent transmission mode or virtual serial port mode to send data to the RS485 interface of 5407M, and the data received on the RS485 interface will also be transmitted to the software on the TCP side. In the virtual serial port mode, the serial port software connected to the virtual serial port does not need to be modified, and only the virtual serial port of ZLVircom needs to be opened. When used as a Modbus gateway, the 5407M supports Modbus TCP to Modbus RTU, so that the host computer can use the Modbus TCP protocol to collect data from RS485 Modbus RTU devices. Conversely, if the RS485 side is used as a master, it can also be used. The 5407M supports advanced Modbus gateway functions, including configurable Modus gateway ZLMB and storage Modbus gateway, which fully meets the various configurations and usage of Modbus gateways. Its multi-master capability allows multiple computer masters to access an RS485 slave at the same time. When used as an MQTT gateway, the device can upload serial port data to the MQTT server using the MQTT protocol in transparent transmission mode, and the supported servers include Baidu Cloud MQTT, Alibaba Cloud MQTT, and China Mobile OneNet platform. The collected Modbus RTU or non-standard serial port data can be parsed into JSON format and encapsulated in MQTT packets for upload. The collected data can be uploaded in JSON format and automatically collected. The collected data supports Modbus RTU, 645 instrument 97 version, 645 instrument 07 version, various non-standard RS485 protocols, Modbus TCP, etc. Users can use ZLVircom to configure the uploaded data format and JSON keywords. MQTT protocol, HTTP POST protocol, HTTP GET protocol, transparent transmission protocol, and various non-standard network protocols can be supported during upload. ZLAN5407M has a reset button to reset parameters in case of JSON formatting. It supports edge computing functions, including: data overrun alarm, data translation and zoom, data change upload, device offline alarm, device independent collection, device automatic connection and other functions. This feature is usually used in conjunction with the JSON feature. In addition ZLAN5407MN model supports P2P networking, no need to relay through the server, and connect the device through ID. ZLAN5407M has all kinds of functions of powerful IoT gateway, which is very suitable for the collection of various RS485 meters and sensors in the industrial field, including the collection of local networks or the independent collection and transmission of uploads to cloud servers. ZLAN5407M can be applied to: As an IoT gateway, as a communication bridge between devices and the cloud; Electricity, smart meters and energy consumption monitoring; Remote monitoring and program download of various types of automated PLC; All kinds of configuration software and equipment communication interface; Access control and security in the field of equipment networking; A typical application connection is shown in Figure 2. The original serial port device RS485 is connected to the RS485 port of the ZLAN5407M, and the 5407M is connected to the computer through the network cable. The software on the computer establishes a connection with the 5407M through TCP/IP, virtual serial port or cloud server. Thereafter, any data sent by the serial device will be transparently transmitted to the computer's software, and the data sent by the software to the ZLAN5407M through the network will also be transparently transmitted to the serial device. Peculiarity Hardware features:1. Rail design: suitable for internal installation of cabinets in industrial fields. 2. Small size: Compared with ordinary serial servers, the width is small and does not take up space. 3. With reset button: easy to reset parameters, recovery when JSON format is wrong. 4. Terminal power supply, 9~24V wide voltage input, with reverse power supply protection. Built-in resettable fuse and pressure-sensitive protection against surges. 5. Terminal RS485 interface, support 32 slave devices, baud rate support 300~921.6kbps. 6. Abundant panel indicators for easy debugging: in terms of connection, there is a LINK light that indicates the establishment of TCP connection, and there is a data activity indicator in terms of data indicator.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. When acting as a TCP client, it also supports TCP server-side functions. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 300~921.6bps, and the custom baud rate is supported. The data bit supports 5~9 bits, and the check bit can be no check, odd check, even check, mark, and space. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, Modbus gateway in non-storage mode, and Modbus gateway function of ZLMB configurable table. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. It is also possible to implement multi-host applications from one serial port to multiple serial ports. The MQTT gateway function is supported. It supports JSON to Modbus RTU, Modbus TCP and 645 meter protocols, and supports HTTP POST AND HTTP GET formats to upload data. Support NTP protocol to obtain network time, which is used for serial port output, and the latter is used for protocol content uploading. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5443A is a new generation of 4 serial server developed by Shanghai ZLAN Information Technology Co., Ltd. It can realize 4 serial port data to TCP/IP, and supports two 10M/100M Ethernet ports. ZLAN5443A Modbus gateway function that converts Modbus TCP to Modbus RTU. The Modbus gateway supports simultaneous data reading on multiple Modbus client connections, i.e., the "multi-master" function. ZLAN5443A supports 4 RS232 serial ports and 4 RS422/485 serial ports. The user connects the ZLAN5443A to the network through a network cable, and the host computer can access four serial ports at the same time through the virtual serial port or TCP protocol. ZLAN5443A supports expansion to 8 serial ports, 12 serial ports, 16 serial ports, and up to 32 serial ports through the level networking port. Peculiarity Hardware features:All 4 serial ports support RS232, RS485, RS422 three serial ports. The 4 serial ports can work independently and fully duplex, without interfering with each other, and can be configured for different baud rates. It supports the network switch function of 2 network ports and can be used as a switch at the same time. Abundant indicators, each serial port has independent TCP connection indicators and data activity indicators.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. Supports 10 TCP connections as a TCP server. The baud rate supports 1200~460800bps, the data bit supports 5~9 bits, the check bit can be no check, odd check, even check, mark, space five ways, support CTS/RTS hardware flow control and XON/XOFF soft flow control. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. DHCP dynamically obtains the domain name server address of the IP and DNS protocol connections. It supports remote search for devices and configuration of device parameters in the cloud. You can remotely view the TCP connection status of a device through the software. The virtual serial port supports data monitoring function. It supports Modbus gateway function and Modbus RTU to Modbus TCP. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5443D is a rail-mounted, RS485 4-serial serial server/Modbus gateway with opto-decoupling isolation, which can effectively isolate the impact of interference on the RS485 bus on the operation of the device and ensure the stability of the device. It is suitable for use in environments where RS485 bus interference is present. Built-in power lightning protection, 9~24V wide voltage, terminal type power access, with shell grounding wire. ZLAN5443D is designed with a rail type with a rail buckle on the back, and also has two mounting ears on it, which can be mounted horizontally or vertically, which are suitable for mounting on the back plate or desktop. ZLAN5443D can realize the conversion of 4 channels TCP/IP protocol to RS485, 4 channels work at the same time and can be configured for different baud rates. The data collection of 485 devices can be realized through the network, and the network terminal can use the virtual serial port to connect the serial port software or the software of direct TCP/IP communication. It comes with two 10M/100M network ports, which can be connected to any network port. The other network port can realize the cascade of multiple ZLAN5443D through the network cable, which can be cascaded into 8 serial ports, 12 serial ports, and 16 serial ports. ZLAN5443D supports the Modbus RTU to Modbus TCP conversion function, and has the characteristics of a storage-based Modbus gateway. Of course, it can also be used as a non-storage Modbus gateway. ZLAN5443D can be applied to:power electronics, smart meters and energy consumption monitoring;As an IoT gateway, a communication bridge between devices and the cloud;Remote monitoring and program download of various types of automation PLC;All kinds of configuration software and equipment communication interfaces;Access control and security in the field of equipment networking;networked information collection of medical equipment; A typical application connection is shown in the diagram. The original serial port device and the serial port connection of the ZLAN5443D, the 5443D is connected to the computer through a network cable. The software on the computer establishes a connection with the 5443D through TCP/IP or virtual serial port. Thereafter, any data sent by the serial device will be transparently transmitted to the computer's software, and the data sent by the software to the ZLAN5443D through the network will also be transparently transmitted to the serial device. Peculiarity Hardware features:There are three ways to choose from rail mounting, backplate mounting ear mounting, and desktop mounting ear fixing. It is especially suitable for industrial guide rail installation, which can save installation space due to the narrow transverse width, and is more convenient for installation and disassembly. RS485 serial port optocoupler isolation, isolation voltage 1500V. It is suitable for strong interference environments where ordinary serial port servers cannot work normally. Effectively isolate the ground circuit between the serial device and the serial server. Built-in power lightning protection: Built-in varistor and ceramic discharge tube can effectively protect the internal circuit of the serial server in the case of power surge. Industrial-grade power supply mode: terminal block wiring mode, convenient for industrial use. It can be supplied with a wide voltage of 9~24V. With enclosure grounding wire, effective diversion of disturbances and surges. Dual-network port design, support the cascade of serial servers, expand to 8 serial ports, 12 serial ports, 16 serial ports, etc. Abundant panel indicators for easy debugging: in terms of connection, there are not only 100M_LINK lights that indicate whether the network cable is connected well, but also LINK lights that indicate the establishment of TCP connections, and independent indicators of "serial port to network port" and "network port to serial port" in terms of data indicators. Convenient for on-site commissioning.Software features:The 4-way serial port can be configured for different baud rates, working independently and without interfering with each other. TCP server, TCP client, UDP mode, and UDP multicast are supported. When you are a TCP client, you can also support the TCP server-side function. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 1200~115200bps, the data bit supports 5~9 bits, and the check bit can be no check, odd check, even check, mark, and space. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, and also supports Modbus gateway in non-storage mode. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5443H is a new generation of 4 serial server developed by Shanghai ZLAN Information Technology Co., Ltd. It can realize 4 serial port data to TCP/IP, and supports two 10M/100M Ethernet ports. ZLAN5443H supports the Modbus gateway function of Modbus TCP to Modbus RTU. The Modbus gateway supports simultaneous data reading on multiple Modbus client connections, i.e., the "multi-master" function. ZLAN5443H supports 4 RS232 serial ports and 4 RS422/485 serial ports. The user connects the ZLAN5443H to the network through a network cable, and the host computer can access four serial ports at the same time through the virtual serial port or TCP protocol. ZLAN5443H supports the expansion of 8 serial ports, 12 serial ports, 16 serial ports, and up to 32 serial ports through the level networking port.Peculiarity Hardware features:All 4 serial ports support RS232, RS485, RS422 three serial ports. The 4 serial ports can work independently and fully duplex, without interfering with each other, and can be configured for different baud rates. It supports the network switch function of 2 network ports and can be used as a switch at the same time. Abundant indicators, each serial port has independent TCP connection indicators and data activity indicators.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. Supports 10 TCP connections as a TCP server. The baud rate supports 1200~460800bps, the data bit supports 5~9 bits, the check bit can be no check, odd check, even check, mark, space five ways, support CTS/RTS hardware flow control and XON/XOFF soft flow control. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. DHCP dynamically obtains the domain name server address of the IP and DNS protocol connections. It supports remote search for devices and configuration of device parameters in the cloud. You can remotely view the TCP connection status of a device through the software. The virtual serial port supports data monitoring function. It supports Modbus gateway function and Modbus RTU to Modbus TCP. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5843A is a new generation of 8 serial port server developed by Shanghai ZLAN Information Technology Co., Ltd., compared with the ZLAN5800A, because the ZLAN5843A adopts the third generation of hardware technology, it is more cost-effective, and ZLAN5843A supports the Modbus gateway function of Modbus TCP to Modbus RTU. The Modbus gateway supports simultaneous data reading on multiple Modbus client connections, i.e., the "multi-master" function. ZLAN5843A serial server is an 8-port protocol converter between RS232/485 and TCP/IP developed by Shanghai ZLAN Information Technology Co., Ltd. ZLAN5843A supports 8 RS232 serial ports, 8 RS485 serial ports (RS485 is not supported by default, if RS485 is required, the model is ZLAN5843A-485), connected to the ZLAN5843A through a network cable, 8 serial ports can be fully duplexed at the same time, and the function of each serial port is the same as that of ZLAN2100/3100, which is an ideal choice for multi-serial port networking. ZLAN5843A supports expansion to 16 serial ports, 24 serial ports, 32 serial ports, and up to 64 serial ports through the level networking port.Peculiarity Hardware features:All 8 serial ports support RS232, RS485, two kinds of serial ports. The 8 serial ports can work independently and fully duplex, without interfering with each other, and can be configured for different baud rates. It supports the network switch function of 2 network ports and can be used as a switch at the same time. Abundant indicators, each serial port has independent TCP connection indicators and data activity indicators.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. Supports 10 TCP connections as a TCP server. The baud rate supports 1200~460800bps, the data bit supports 5~9 bits, the check bit can be no check, odd check, even check, mark, space five ways, support CTS/RTS hardware flow control and XON/XOFF soft flow control. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. DHCP dynamically obtains the domain name server address of the IP and DNS protocol connections. It supports remote search for devices and configuration of device parameters in the cloud. You can remotely view the TCP connection status of a device through the software. The virtual serial port supports data monitoring function. It supports Modbus gateway function and Modbus RTU to Modbus TCP. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5840I is a new generation of RS485 isolated 8 serial server/Modbus gateway developed by Shanghai ZLAN Information Technology Co., Ltd., which can effectively isolate the impact of interference on the RS485 bus on the working of the equipment and ensure the stability of the equipment. It is suitable for use in the environment where RS485 bus interference is used. Built-in power surge protection. ZLAN5840I can convert 8-channel serial port data to TCP/IP. Compared with ZLAN5800A, ZLAN5840I supports the Modbus gateway function of Modbus TCP to Modbus RTU. The Modbus gateway supports simultaneous data reading on multiple Modbus client connections, i.e., the "multi-master" function. ZLAN5840I supports 8 RS485 serial ports, and the RS485 interface is a terminal interface. It supports two 10M/100M Ethernet ports, the user connects the device to the network through a network cable, and the host computer can access 8 serial ports at the same time through the virtual serial port or TCP protocol. ZLAN5840I supports the expansion of 16 serial ports, 24 serial ports, 32 serial ports, and up to 64 serial ports through the level networking port.ZLAN5840I can be applied to: Power electronics, smart meters and energy monitoring; As an IoT gateway, it acts as a communication bridge between devices and the cloud; Remote monitoring and program download of various types of automated PLCs; All kinds of configuration software and equipment communication interfaces; Access control and security equipment networking; Networked information collection of medical equipment;Peculiarity8 serial ports support opto-isolated RS485 serial ports. The 8 serial ports can work independently, do not interfere with each other, and can be configured for different baud rates. It supports the network switch function of 2 network ports and can be used as a switch at the same time. Abundant indicators, each serial port has independent TCP connection indicators and data activity indicators. TCP server, TCP client, UDP mode, and UDP multicast are supported. Supports 10 TCP connections as a TCP server. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. DHCP dynamically obtains the domain name server address of the IP and DNS protocol connections. It supports remote search for devices and configuration of device parameters in the cloud. It supports Modbus gateway function and Modbus RTU to Modbus TCP. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | SummaryZLAN5G00A Serial Device Server is a rack-mounted 16-port protocol converter between RS232/4485/422 and TCP/IP developed by Shanghai ZLAN. ZLAN5G00A support 16 channels RS232 serial port, 16 channels RS485 serial port, 16 channels RS422 serial port, and RS232 support flow control. The 16 channels can achieve to full-duplex work at the same time after connecting to ZLAN5G00A via a network cable, and the function of each serial port is same as single serial port server ZLAN2100/3100. Each channel serial port can be TCP client, UDP client, UDP-UDP multicast. ZLAN5G00A is the ideal choice for multi-serial port connecting to internet.ZLAN can provide shells in both white and black colors.1) All 16 channels support the three kind serial port RS232, RS485, RS422 (needs jumper setting), the serial port is in type of RJ45. RS232 support hardware flow control. When using RS232, can provide patch cord accessories for RJ45 to DB9 (male). 2) All 16 channels can full-duplex work independently and no-interference each other. Can be configured different baud rate. 3) Support network switch function of 4 Ethernet port, and can be used as switch meanwhile. 4) Abundant signal light, each serial port has independent indicator light for TCP connection and data activity. 5) Support power supply through cable----POE power supply (customization) 6) 220V AC power supply. 7) 19-inch standard 1U rack structure design, convenient installation. With rack installation accessories. 8) Patent products of Shanghai ZLAN with leading technology. Patent No. ZL 2014 2 0108890.3. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| |
