| KEMATION |
| | TL-ST5012F is the latest full-10 Gigabit Layer 3 network management switch launched by TP-LINK, which adopts a new generation of high-performance hardware and software platform, provides full 10 Gigabit optical ports, supports Layer 3 routing protocol, complete security protection mechanism, perfect ACL/QoS policy and rich VLAN functions, is easy to manage and maintain, and is widely used in small and medium-sized enterprises, hotels and campus network aggregation, core and other application scenarios.12 10 Gigabit SFP+ ports Type-C console port is supported USB port is supported Supports dynamic RIP routing, static routing, and ARP proxy DHCP server, DHCP relay, and DHCP snooping are supported Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported Web management, CLI command line, and SNMP are supported Subsequent software upgrades support stacking*Full 10 Gigabit optical portThe TL-ST5012F provides 12 10 Gigabit SFP+ ports to meet the requirements of high-speed networking.Strong business processing capabilitiesIt supports the RIP dynamic routing protocol, dynamically generates and updates routing tables, and solves the routing problem of small and medium-sized networks after subnets are divided. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. IPv6 is supported to meet the requirements of network transition from IPv4 to IPv6.Complete security protection mechanismSupports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers.Versatile reliability protectionSupports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability.Easy operation and maintenanceIt supports TP-LINK commercial flat gimbal, which can easily manage and maintain equipment remotely, reducing on-site operation and maintenance costs. Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported. | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | TL-NS650 is a 10 Gigabit uplink Layer 3 network management switch developed and launched by TP-LINK, which adopts a new generation of high-performance hardware and software platform to provide flexible Gigabit access and cost-effective 10 Gigabit uplink ports. The device also supports Layer 3 routing protocol, complete security protection mechanism, perfect ACL/QoS policy, and rich VLAN functions, which are easy to manage and maintain, and can meet the networking requirements of hotels, campuses, and enterprise campuses.24 Gigabit RJ45 ports, 4 Gigabit SFP+ ports It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Supports dynamic RIP routing, static routing, ARP proxy, and DHCP server Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supportedGigabit access, 10 Gigabit uplinkIt provides 24 1G RJ45 electrical ports to easily meet the requirements of gigabit access networking. Four 10G SFP+ optical ports are provided, and the uplink ports will not become a bottleneck in network traffic. All ports are capable of wire-speed forwarding, giving full play to performance.Strong business processing capabilitiesIt supports the RIP dynamic routing protocol to solve the routing problem of small and medium-sized networks after subnets are divided, simplifying network configuration. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access.Complete security protection mechanismSupports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers.Versatile reliability protectionSupports STP/RSTP/MSTP production tree protocols to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability.Easy operation and maintenanceIt supports TP-LINK commercial flat gimbal, which can easily manage and maintain equipment remotely, reducing on-site operation and maintenance costs. Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported. | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | TL-SH1218 is a 10 Gigabit uplink Ethernet switch independently developed by TP-LINK, providing 16 x 2.5G/1Gbps RJ45 ports and 2 x 10 Gigabit SFP+ optical ports, supporting IEEE 802.3ae, 802.3ab, and 802.3bz standards.Provides 16 2.5Gbps network ports Provides two 10 Gigabit uplink SFP+ optical ports All ports support wire-speed forwarding and automatic rollover Plug and play, no configuration required, rack-mounted Supports IEEE 802.3ae, 802.3ab, and 802.3bz standardsPort performance It provides 16 2.5G/1Gbps adaptive RJ45 ports and 2 10 Gigabit SFP+ optical ports, all of which support wire-speed forwarding. Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation; Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. The store-and-forward mechanism is adopted, and the built-in high-capacity cache is integrated, and all ports can achieve 2.5Gbps non-blocking line-rate forwarding. Stable and reliable The low-power design of the main machine, the all-steel shell naturally dissipates heat, and ensures the stable operation of the product for a long time. Plug and play, simple to use The 19-inch standard rack-mount is plug-and-play and requires no management, and dynamic LED indicators provide simple working status prompts and troubleshooting. | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | TP-LINK's newly developed 3 series 10 Gigabit uplink managed PoE switches adopt a new generation of high-performance hardware and software platform, provide flexible and cost-effective full Gigabit access and 10 Gigabit uplink ports, complete security protection mechanisms, perfect ACL/QoS policies and rich VLAN functions, easy to manage and maintain, meet users' networking needs for easy management, high security and low cost of network equipment, and are suitable for campus, hotel and enterprise campus network access, aggregation and core application scenarios.24 x 10/100/1000Base-T RJ45 ports, supporting IEEE 802.3at/af PoE power supply 4 independent SFP+ ports The maximum PoE power supply power of the whole machine is 215W, and the maximum PoE power supply power of a single port is 30W It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supportedFull gigabit electrical port + 10 gigabit uplink optical portThe whole series supports the combination of "Ethernet port + optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. Provide 8/16/24 multi-specification port products, and all ports have gigabit wire-speed forwarding capabilities to meet the needs of different users.Strong business processing capabilitiesIEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. Voice VLANs are supported, and QoS parameters are configured for voice data flows to improve the transmission priority of voice data flows and ensure call quality. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocol and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access. Multicast VLANs and multicast filtering are supported to efficiently transmit data, save network bandwidth, and reduce network load. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring.Complete security protection mechanismSupports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic.Versatile reliability protectionSupports STP/RSTP/MSTP SPANNING TREE protocol to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability.PoE power supply functionThe PoE model supports PoE+ power supply and follows the IEEE 802.3af/at standard to meet the requirements of PoE power supply in scenarios such as security monitoring, teleconferencing systems, and wireless coverage. You can set the power supply control of PoE ports based on user-defined time periods on the web management interface. You can configure the PoE port priority on the web management interface, and when the remaining power is insufficient, the power supply of the high-priority port is guaranteed. In PoE models, the maximum PoE output power per port can reach 30W, and users can set the maximum power that can be provided by the port on the web management interface.Easy operation and maintenanceSupports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported. | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | TL-SH6428 is a 6 series 10 Gigabit uplink stacked Layer 3 network management switch newly developed and launched by TP-LINK, which adopts a new generation of high-performance hardware and software platform, provides flexible full Gigabit access and cost-effective 10 Gigabit uplink ports, supports Layer 3 routing protocol, complete security protection mechanism, perfect ACL/QoS policy and rich VLAN functions, is easy to manage and maintain, and is suitable for the core layer or aggregation layer of small and medium-sized networks such as hotels and campuses.24 x 10/100/1000Base-T RJ45 ports 4 10 Gigabit SFP+ ports It supports TP-LINK commercial cloud platform management OSPF and RIP dynamic routes and static routes are supported DHCP server, DHCP relay, and DHCP snooping are supported Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported Web management, CLI command line, and SNMP are supported Stacking support, up to 8 stacking unitsGigabit access, 10 Gigabit uplinkIt supports the combination of "Gigabit Ethernet port + 10 Gigabit optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. All ports have wire-speed forwarding capabilities to meet the needs of different users.Strong business processing capabilitiesIt supports the RIP dynamic routing protocol to solve the routing problem of small and medium-sized networks after subnets are divided, simplifying network configuration. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access.Complete security protection mechanismSupports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers.Versatile reliability protectionStacking is supported, and the stacked system is virtualized into a "distributed device", which can simplify management and improve system reliability. Supports STP/RSTP/MSTP production tree protocols to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability.Easy operation and maintenanceIt supports TP-LINK commercial flat gimbal, which can easily manage and maintain equipment remotely, reducing on-site operation and maintenance costs. Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported. | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | TL-SH5654F is a newly developed and launched 5 series 10 Gigabit uplink Layer 3 network management switches newly developed by TP-LINK, which adopts a new generation of high-performance hardware and software platform, provides flexible full Gigabit access and cost-effective 10 Gigabit uplink ports, supports Layer 3 routing protocol, complete security protection mechanism, perfect ACL/QoS policy and rich VLAN functions, is easy to manage and maintain, and is suitable for network aggregation layers such as hotels and campuses.48 x 1000Mbps SFP ports 6 10 Gigabit SFP+ ports It supports TP-LINK commercial cloud platform management Dynamic and static routes are supported DHCP server, DHCP relay, and DHCP snooping are supported Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supported Web management, CLI command line, and SNMP are supported With standard power supplyGigabit access, 10 Gigabit uplinkTL-SH5654F can provide 48 Gigabit SFP optical ports and 6 Gigabit SFP+ optical ports, and supports the combination of "Gigabit Ethernet port + 10 Gigabit optical port", which is convenient for users to flexibly network and meet the networking needs of various scenarios. All ports have wire-speed forwarding capabilities to meet the needs of different users.Strong business processing capabilitiesIt supports the RIP dynamic routing protocol to solve the routing problem of small and medium-sized networks after subnets are divided, simplifying network configuration. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access.Complete security protection mechanismSupports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers.Versatile reliability protectionSupports STP/RSTP/MSTP production tree protocols to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability.Easy operation and maintenanceIt supports TP-LINK commercial flat gimbal, which can easily manage and maintain equipment remotely, reducing on-site operation and maintenance costs. Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported. | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | TL-SH5428F is a newly developed and launched 5 series 10 Gigabit uplink Layer 3 network management switches by TP-LINK, which adopts a new generation of high-performance hardware and software platform to provide flexible Gigabit access and cost-effective 10 Gigabit uplink ports. It supports Layer 3 routing protocol, security protection mechanism, and ACL/QoS/VLAN functions, which is easy to manage and maintain, and easily meets the optical fiber networking requirements of hotels, campuses, and enterprise campuses.24 Gigabit SFP ports, 4 10 Gigabit SFP+ ports Management port and RJ45 console port are supported The optical port can be used with TP-LINK optical module or electrical port module for easy access to optical fiber/network cable It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Supports dynamic RIP routing, static routing, ARP proxy, and DHCP server Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supportedGigabit access, 10 Gigabit uplinkProvides 24 1G SFP optical ports to easily meet the requirements of gigabit fiber access networking. Four 10G SFP+ optical ports are provided, and the uplink ports will not become a bottleneck in network traffic. All ports are capable of wire-speed forwarding, giving full play to performance.Free selection of optical fiber/network cable, flexible accessThe SFP optical port can be used with TP-LINK gigabit optical modules (such as TL-SM312) or gigabit electrical port modules (such as TL-SM310U). The SFP+ optical port can be used with TP-LINK 10 Gigabit optical modules (such as TL-SM512) or 10 Gigabit electrical port modules (such as TL-SM510U). Users can choose optical modules or electrical port modules according to actual networking requirements, and flexibly use optical fibers or network cables for connection.Strong business processing capabilitiesIt supports the RIP dynamic routing protocol to solve the routing problem of small and medium-sized networks after subnets are divided, simplifying network configuration. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access.Complete security protection mechanismSupports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers.Versatile reliability protectionSupports STP/RSTP/MSTP production tree protocols to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability.Easy operation and maintenanceIt supports TP-LINK commercial flat tilts, making it easy to remotely manage and maintain equipment and reduce on-site O&M costs. Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported.*The data and products cited in the above introduction are the performance of the product in the specific experimental environment of specific equipment, and may vary based on the actual environment or equipment on site.The third-party product information mentioned in the above content, such as flagship models and carrier bandwidth, is statistical information from mainstream manufacturers as of the official release date of the product.There may be multiple versions of the same model of product, the product pictures and APP/software interface in the above pages are for illustration only, and the physical product (including but not limited to appearance and color) and APP/software interface (including but not limited to UI and pictures) may be slightly different, please refer to the actual product.Due to the real-time changes in product versions, batches, and production supply factors, in order to provide as accurate product information, functional parameters, and appearance details as possible, TP-LINK may adjust the copywriting and picture effects on the above pages in real time to be consistent with the actual products. It is subject to change without notice.Affected by factors such as measurement environment and measurement method, there may be certain scientific errors in product size, parameters and other information. | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | TL-SH5428 is a newly developed and launched 5 series 10 Gigabit uplink Layer 3 network management switch by TP-LINK, which adopts a new generation of high-performance hardware and software platform to provide flexible Gigabit access and cost-effective 10 Gigabit uplink ports. The device also supports Layer 3 routing protocol, complete security protection mechanism, perfect ACL/QoS policy, and rich VLAN functions, which are easy to manage and maintain, and can meet the networking requirements of hotels, campuses, and enterprise campuses.24 Gigabit RJ45 ports, 4 Gigabit SFP+ ports It supports remote management of TP-LINK commercial cloud platform and mobile APP management It supports intelligent deployment, automatic configuration networking, and graphical topology display Supports dynamic RIP routing, static routing, ARP proxy, and DHCP server Supports quaternary binding, ARP/IP/DoS protection, and 802.1X authentication VLANs, QoS, ACLs, spanning trees, multicast, and IPv6 are supportedGigabit access, 10 Gigabit uplinkIt provides 24 1G RJ45 electrical ports to easily meet the requirements of gigabit access networking. Four 10G SFP+ optical ports are provided, and the uplink ports will not become a bottleneck in network traffic. All ports are capable of wire-speed forwarding, giving full play to performance.Strong business processing capabilitiesIt supports the RIP dynamic routing protocol to solve the routing problem of small and medium-sized networks after subnets are divided, simplifying network configuration. Static routes are supported, and the administrator manually configures route entries to achieve simple, efficient, and reliable communication between different network segments. DHCP servers are supported, which assign IP addresses to hosts in the network. DHCP trunking is supported, and switches in different interfaces or subnets can also obtain IP addresses, reducing the number of DHCP servers. Proxy ARP is supported, so that hosts in different physical networks on the same network segment can communicate normally. IEEE 802.1Q VLAN, MAC VLAN, protocol VLAN, and private VLAN are supported, allowing users to flexibly divide VLANs according to different requirements. GVRP is supported to implement dynamic distribution, registration, and attribute propagation of VLANs, reducing the amount of manual configuration and ensuring the correctness of configuration. The VLAN VPN function encapsulates the outer VLAN tag for the user's private network packets at the public network access end, so that the packets carry two layers of VLAN tags across the public network. It supports QoS, three priority modes based on port, 802.1P-based and DSCP-based, and four queue scheduling algorithms of Equ, SP, WRR, and SP+WRR. ACLs are supported to filter packets by configuring matching rules, processing operations, and time permissions, providing flexible security access control policies. It supports IGMP V1/V2 multicast protocols, MLD snooping, and IGMP snooping to meet the requirements of multi-terminal HD video surveillance and video conferencing access.Complete security protection mechanismSupports IP address, MAC address, VLAN, and port quaternary binding to filter data packets. Supports ARP protection against ARP spoofing and ARP flood attacks, such as gateway spoofing and man-in-the-middle attacks, which are common in LANs. IP source protection is supported to prevent illegal address spoofing, including MAC address spoofing, IP spoofing, and MAC/IP spoofing. DoS protection is supported, and attacks such as Land Attack, Scan SYNFIN, Xmascan, and Ping Flooding are supported. It supports 802.1X authentication, provides authentication functions for LAN computers, and controls the authorization status of controlled ports according to the authentication results. Port security is supported, which stops learning when the number of MAC addresses learned on a port reaches the maximum number to prevent MAC address attacks and control port network traffic. Support DHCP Snooping, effectively eliminate private DHCP servers, and ensure the legitimacy of DHCP servers.Versatile reliability protectionSupports STP/RSTP/MSTP production tree protocols to eliminate Layer 2 loops and implement link backup. Spanning tree security functions are supported to prevent devices in a spanning tree network from various forms of malicious attacks. Static aggregation and dynamic aggregation are supported, effectively increasing link bandwidth, implementing load balancing, link backup, and improving link reliability.Easy operation and maintenanceIt supports TP-LINK commercial flat gimbal, which can easily manage and maintain equipment remotely, reducing on-site operation and maintenance costs. Supports multiple management and maintenance methods, such as web management, CLI command line (console, Telnet), and SNMP (V1/V2/V3). Supports HTTPS, SSL V3, TLSV1, SSHV1/V2 and other encryption methods for safer management. RMON, system logs, and port traffic statistics are supported, which is convenient for network optimization and transformation. Supports cable detection, ping detection, and Tracert detection operations to easily analyze faulty network nodes. It supports LLDP, which is convenient for the network management system to query and judge the communication status of the link. CPU monitoring, memory monitoring, ping detection, Tracert detection, and cable detection are supported. | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | TL-SH1226 is a 10 Gigabit uplink unmanaged Ethernet switch product independently developed by TP-LINK, providing 24 x 10/100/1000M RJ45 ports and 2 x 10 Gigabit SFP+ fiber module expansion slots, with wire-speed forwarding capability per port. This series of switches provides different working modes for applications such as visual security, diskless boot and wireless networking, and has good network adaptability.24 x 10/100/1000M adaptive RJ45 ports, 2 x 10 Gigabit SFP+ fiber module expansion slots All ports are capable of wire-speed forwarding Auto MDI/MDIX is supported The switch can be switched by flipping the switch Plug and play, rack-mountablePort performance It provides 24 x 10/100/1000M adaptive RJ45 ports and 2 x 10 Gigabit uplink SFP+ fiber module expansion slots, all ports can achieve wire-speed forwarding. Each port supports MDI/MDIX auto-rollover and duplex/rate auto-negotiation; Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control. Three modes of operation It provides a mode switching switch, which supports three working modes: "standard switching", "VLAN isolation" and "network cloning", which can optimize and support various application scenarios such as visual security, diskless boot and wireless networking. Simple to use The 19-inch standard rack-mount is plug-and-play and requires no management, and dynamic LED indicators provide simple working status prompts and troubleshooting. | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | TL-ST1008F is an all-10 Gigabit non-managed switch, providing 8 10 Gigabit SFP+ optical ports, all ports support wire-speed forwarding, plug and play.Provides 8 10 Gigabit SFP+ optical ports All ports are capable of wire-speed forwarding Plug and play, no configuration required IEEE 802.3ae and 802.3z standards are supportedPort performance Provide 8 10 Gigabit SFP+ optical ports; The store-and-forward mechanism is adopted, and the high-capacity cache is integrated inside, and all ports can achieve 10 Gigabit non-blocking line-speed forwarding. Stable and reliable The low-power design of the main machine, the all-steel shell naturally dissipates heat, and ensures the stable operation of the product for a long time. Simple to use Plug-and-play, no management required, dynamic LED indicators provide simple working status prompts and troubleshooting. | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | TL-SH1005PB is a 2.5Gbps Ethernet PoE switch independently developed by Pulian Technology Co., Ltd. TL-SH1005PB provides 5 x 2.5Gbps RJ45 ports, of which ports 1~4 support PoE function. The maximum PoE output power of the TL-SH1005PB is 118W, and the maximum PoE output power of each port is 90W. As a PoE power supply device, it can automatically detect and identify the powered device that meets the standard and supply it with network cables. Simple and convenient to use, no configuration required, plug and play, can flexibly expand home and office networks without being limited by power line layout.5 x 2.5G/1G adaptive RJ45 ports All four RJ45 ports support IEEE 802.3bt PoE power supply and are compatible with IEEE 802.3at/af standard The maximum PoE power supply power of the whole machine is 118W, and the maximum PoE power supply power of a single port is 90W PoE power delivery ports support the priority mechanismFull 2.5G portProvides 5 x 2.5G RJ45 ports, including 4 PoE ports and 1 Uplink port. All ports support 2.5G non-blocking line-speed forwarding, making transmission smoother. Supports IEEE 802.3x full-duplex flow control and backpressure half-duplex flow control.PoE power supply functionFour 2.5G RJ45 ports support PoE++ power supply to meet the PoE power supply requirements of visual security, teleconferencing systems, wireless coverage, and other scenarios. In line with IEEE 802.3bt/at/af PoE power supply standard, the maximum PoE output power of the whole machine is 118W, and the maximum PoE output power of a single port is 90W. Automatically identify PoE devices for power supply without damaging non-PoE devices. PoE ports support a priority mechanism to ensure the power supply of high-priority ports when the remaining power is insufficient, so as to prevent devices from overloading.The equipment is stable and reliableThe low-power design of the host and the fan enhance heat dissipation to ensure the stable operation of the product. It adopts TP-LINK's self-developed power supply and high redundancy design to provide long-term and stable PoE power output. The equipment meets the national CCC standard, fully meets the safety requirements, and is safe and reliable to use.It's easy to usePlug and play, no configuration required, simple and convenient. Users can easily understand the working status of the device through the power indicator (Power), power warning light (PoE Max), and port status indicator (Link/Act). | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | TL-SH1005 is a full 2.5Gbps Ethernet switch, providing 5 2.5G RJ45 ports, all ports support wire-speed forwarding, plug and play.Provides five 2.5Gbps network ports All ports are capable of wire-speed forwarding Plug and play, no configuration required Supports IEEE 802.3ab and 802.3bz standardsPort performance 5 x 2.5Gbps RJ45 ports; The store-and-forward mechanism is adopted, and the built-in high-capacity cache is integrated, and all ports can achieve 2.5Gbps non-blocking line-rate forwarding. Stable and reliable The low-power design of the main machine, the all-steel shell naturally dissipates heat, and ensures the stable operation of the product for a long time. Simple to use Plug-and-play, no management required, dynamic LED indicators provide simple working status prompts and troubleshooting. | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, support intelligent deployment, automatic configuration networking, abnormal alarms and other functions, and can be easily used by novices without the need for professional IT operation and maintenance personnel; Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios.8 x 10/100/1000Base-T RJ45 ports Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports 802.1Q VLAN, QoS, and bandwidth control Supports port traffic statistics, port monitoring, port aggregation, and port isolation Supports cable detection and loopback protectionFull Gigabit portsThe TL-SG2008D provides eight 10/100/1000Mbps RJ45 ports.All ports have gigabit wire-speed forwarding capability to meet the needs of different users.It supports remote management on the APP side and the web side, and the whole process of operation is portable and encryptedRemote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient.It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client.Scan the code to add devices with one click and automatically configure the networkingSimplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch.Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand.View port status in real time and provide timely alarms for exceptionsReal-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance.Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency.Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminatedPort aggregation is supported, which can provide higher uplink rates.Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops.Simple and practical network management functionsIEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs.It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration.Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring.Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | TP-LINK's newly developed "Cloud Switching Series" full gigabit cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, support intelligent deployment, automatic configuration networking, abnormal alarms and other functions, and can be easily used by novices without the need for professional IT operation and maintenance personnel; Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios.5 x 10/100/1000Base-T RJ45 ports Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting Supports 802.1Q VLAN, QoS, and bandwidth control Supports port traffic statistics, port monitoring, port aggregation, and port isolation Supports cable detection and loopback protection It supports three modes: cloud management, VLAN isolation, and standard switchingFull Gigabit portsThe TL-SG2005 provides five 10/100/1000Mbps RJ45 ports.All ports have gigabit wire-speed forwarding capability to meet the needs of different users.It supports remote management on the APP side and the web side, and the whole process of operation is portable and encryptedRemote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient.It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client.Scan the code to add devices with one click and automatically configure the networkingSimplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch.Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand.View port status in real time and provide timely alarms for exceptionsReal-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance.Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency.Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminatedPort aggregation is supported, which can provide higher uplink rates.Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops.Simple and practical network management functionsIEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs.It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration.Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring.Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface.One-click to switch working modesCloud management mode: The switch supports network management functions such as VLAN, port aggregation, and port monitoring, and can be managed and maintained through the commercial cloud app, commercial network cloud platform, and local interface.VLAN isolation mode: The switch does not support the NMS function, and some ports are isolated from each other.Standard switching mode: The switch does not support the NMS function, and all ports can communicate freely. | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| | TP-LINK's newly developed "Cloud Switching Series" 2.5G cloud management switches provide more efficient, simple, secure, and easy-to-use remote management methods, and support functions such as intelligent deployment, automatic configuration networking, and abnormal alarms, and can be easily used by novices without the need for professional IT O&M personnel. Basic network management functions, such as bandwidth control, are easy to manage and maintain, and are suitable for campus, hotel, and enterprise campus network access application scenarios.5 x 10/100/1000/2500Mbps RJ45 ports 1 x 1/2.5/10Gbps SFP+ port Support remote management of business cloud APP and web It supports intelligent deployment, abnormal alarms, and fast troubleshooting 802.1Q VLAN, Port VLAN, QoS, bandwidth control, and storm suppression are supported Supports port aggregation, port traffic statistics, port monitoring, cable detection, and loopback protection2.5G port The TL-SE2106 provides five 10/100/1000/2500Mbps RJ45 ports and one 1/2.5/10Gbps SFP+ port. All ports have wire-speed forwarding capabilities to meet the needs of different users. It supports remote management on the APP side and the web side, and the whole process of operation is portable and encrypted Remote management through the TP-LINK business cloud APP, only one mobile phone is needed, no matter where you are, you can complete a variety of operations such as setup, management, troubleshooting, etc., which is easy and convenient. It provides TP-LINK commercial network cloud platform, and can also manage devices through the web client. Scan the code to add devices with one click and automatically configure the networking Simplify the steps of adding devices, you only need to scan the QR code on the fuselage to add the switch, and automatically identify all devices connected to the switch. Scan the QR code once to achieve fast and intelligent start. The identified topology is displayed in a graphical way, which is clear and intuitive, and easy to understand. View port status in real time and provide timely alarms for exceptions Real-time monitoring of the working status of each port and graphical display, simple interaction, clear at a glance. Timely alarms are given for abnormal status, and fault location is highlighted and visible at a glance, reducing the difficulty of troubleshooting and greatly improving O&M efficiency. Trunk ports converge, the uplink rate is doubled, and loops are automatically detected and eliminated Port aggregation is supported, which can provide higher uplink rates. Intelligent loop protection, which automatically detects the network topology and automatically repairs the loop immediately after it is found, effectively preventing network congestion and faults caused by network loops. Simple and practical network management functions IEEE 802.1Q VLANs are supported, allowing users to flexibly divide VLANs according to their needs. It supports QoS and supports three priority modes: port-based, 802.1P-based, and DSCP-based, to optimize bandwidth configuration. Port monitoring is supported, and a copy of the data packets of the monitored port is copied to the monitored port to implement network monitoring. Port aggregation is supported, which effectively increases link bandwidth, implements link backup, and improves link reliability. The device can be managed and maintained through the web interface. | TP-LINK | In Stock | New Sealed Under Guarantee | | |
| |
| MoweStar |
| | | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | Industrial serial port server series products, mainly realize the data transmission between Ethernet and serial port (RS-232/RS-485/RS-422), it integrates the TCP/IP protocol stack, RS-232/RS-485/RS-422 devices that are not connected to the Internet can also be easily, flexibly and quickly connected to Ethernet. The series of products use high-performance ARM chip to ensure stable data transmission; Support a variety of working modes to meet different application requirements; Excellent anti-interference performance, suitable for harsh industrial environments.Benefits:1. Support 2-channel RS232/485 to 2-channel 10/100M Ethernet (can be cascaded).2. Support Modbus RTU/ASCII and Modbus TCP conversion3. Support DC9~60V non-polar input, dual power supply redundancy design, 6KV lightning protection4. Modbus configuration-free pre-read, single serial port supports 256 Modbus RTU instructions, and the number of connections is synchronously extended to other transparent transmission modes5. High-strength aluminum alloy shell, IP40 protection level, fanless shell heat dissipation, stable operation in harsh industrial environment of -40°C~+85°C | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | Industrial serial port server series products, mainly realize the data transmission between Ethernet and serial port (RS-232/RS-485/RS-422), it integrates the TCP/IP protocol stack, RS-232/RS-485/RS-422 devices that are not connected to the Internet can also be easily, flexibly and quickly connected to Ethernet. The series of products use high-performance ARM chip to ensure stable data transmission; Support a variety of working modes to meet different application requirements; Excellent anti-interference performance, suitable for harsh industrial environments.● Support 4-way RS232/485 to Ethernet, 4 serial ports are independent of each other, do not affect each other● Support Modbus RTU to TCP, support for virtual serial port● Support TCP Server/TCP Client/UDP/UDP multicast/HTTPD/parallel mode, etc.● Support customized packet length and interval, etc.● Industrial-grade design, EMC three-level protection, stable and reliable | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | Industrial serial port server series products, mainly realize the data transmission between Ethernet and serial port (RS-232/RS-485/RS-422), it integrates the TCP/IP protocol stack, RS-232/RS-485/RS-422 devices that are not connected to the Internet can also be easily, flexibly and quickly connected to Ethernet. The series of products use high-performance ARM chip to ensure stable data transmission; Support a variety of working modes to meet different application requirements; Excellent anti-interference performance, suitable for harsh industrial environments.● Support 4-way RS485/422 to Ethernet, each serial port can be configured individually, working simultaneously without affecting each other● 4-channel serial port, power supply, network port full isolation, isolation voltage 2KVAC, EMC four-level protection● Support Modbus RTU/ASCII to Modbus TCP.● Support TCP Server/TCP Client/UDP/UDP Multicast/Pari Connection/Virtual Serial Port/HTTPD/WebSocket, etc.● Support customized packet length and interval, etc.● Industrial grade design, -40℃~85℃ wide temperature, 9~36V wide voltage | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | Industrial serial port server series products, mainly realize the data transmission between Ethernet and serial port (RS-232/RS-485/RS-422), it integrates the TCP/IP protocol stack, RS-232/RS-485/RS-422 devices that are not connected to the Internet can also be easily, flexibly and quickly connected to Ethernet. The series of products use high-performance ARM chip to ensure stable data transmission; Support a variety of working modes to meet different application requirements; Excellent anti-interference performance, suitable for harsh industrial environments.● Support 4-way RS485 to 2-way 10/100M Ethernet (can be cascaded)● Supports Modbus RTU/ASCII to Modbus TCP● Supports DC9~60V non-polarized input, dual power supply redundancy design, 4kV surge protection● Modbus configuration-free pre-reading, single serial port supports 256 Modbus RTU commands, the number of connections synchronized expansion to other transmission modes● Firm terminal wiring, -40℃~85℃ wide temperature, DIN-rail mounting | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | Industrial serial port server series products, mainly realize the data transmission between Ethernet and serial port (RS-232/RS-485/RS-422), it integrates the TCP/IP protocol stack, RS-232/RS-485/RS-422 devices that are not connected to the Internet can also be easily, flexibly and quickly connected to Ethernet. The series of products use high-performance ARM chip to ensure stable data transmission; Support a variety of working modes to meet different application requirements; Excellent anti-interference performance, suitable for harsh industrial environments.● Support 8-way RS232 to Ethernet● Support Modbus RTU/ASCII to Modbus TCP● Support TCP Server/TCP Client/UDP/UDP Multicast/Pari Connection/Virtual Serial Port and other work modes.● Support MQTT on the cloud (Ali MQTT, China Mobile OneNet, Huawei Cloud MQTT, private cloud, etc.), HTTPD, WebSocket and so on.● Support data forwarding function between serial ports● Wide temperature range of 40℃~85℃, wide voltage range of 9~36V, EMC level 4 protection | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | Industrial serial port server series products, mainly realize the data transmission between Ethernet and serial port (RS-232/RS-485/RS-422), it integrates the TCP/IP protocol stack, RS-232/RS-485/RS-422 devices that are not connected to the Internet can also be easily, flexibly and quickly connected to Ethernet. The series of products use high-performance ARM chip to ensure stable data transmission; Support a variety of working modes to meet different application requirements; Excellent anti-interference performance, suitable for harsh industrial environments.● Support 8-way RS485 to Ethernet● Support Modbus RTU/ASCII to Modbus TCP● Support TCP Server/TCP Client/UDP/UDP Multicast/Pari Connection/Virtual Serial Port and other working modes.● Support MQTT on the cloud (Ali MQTT, China Mobile OneNet, Huawei Cloud MQTT, private cloud, etc.), HTTPD, WebSocket and so on.● Support data forwarding function between serial ports● -40℃~85℃ wide temperature, 9~36V wide voltage, EMC level 4 protection. | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | Industrial serial port server series products, mainly realize the data transmission between Ethernet and serial port (RS-232/RS-485/RS-422), it integrates the TCP/IP protocol stack, RS-232/RS-485/RS-422 devices that are not connected to the Internet can also be easily, flexibly and quickly connected to Ethernet. The series of products use high-performance ARM chip to ensure stable data transmission; Support a variety of working modes to meet different application requirements; Excellent anti-interference performance, suitable for harsh industrial environments.● Support 8-way RS232/485 to 2-way 10/100M Ethernet (can be cascaded)● Support Modbus RTU/ASCII to Modbus TCP● Support TCP Server/TCP Client/UDP/UDP multicast/Pari Connection/virtual serial port and other work modes● Support MQTT on the cloud (Ali MQTT, China Mobile OneNet, Huawei Cloud MQTT, private cloud, etc.), HTTPD, WebSocket, etc● Support data forwarding function between serial ports● Strong terminal wiring, -40℃~85℃ wide temperature, EMC level 4 protection, standard 1U rack mounting | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | | MoweStar | In Stock | New Sealed Under Guarantee | | |
| |
| PUSR |
| | USR-TCP232-T1/S1 is a new module launched by the Internet of Things to quickly realize the transparent transmission of network port and serial port data transmission. All data protocol conversion is processed internally, and users only need to configure simple data to realize the transmission of data from the serial port to the network end. The product comes with RJ45 network port, supports TCP/UDP protocol, DHCP and DNS functions, product parameters can be configured through serial port AT, network configuration protocol or built-in Web, simple and fast. The product is stable and reliable, resistant to high and low temperatures, and the two packages can be integrated into the embedded development board faster. The products are widely used in application scenarios such as instrumentation, access control, smart home, industrial control machine, and medical equipment. | PUSR | In Stock | New Sealed Under Guarantee | | |
| | USR-TCP232-T1/S1 is a new module launched by the Internet of Things to quickly realize the transparent transmission of network port and serial port data transmission. All data protocol conversion is processed internally, and users only need to configure simple data to realize the transmission of data from the serial port to the network end. The product comes with RJ45 network port, supports TCP/UDP protocol, DHCP and DNS functions, product parameters can be configured through serial port AT, network configuration protocol or built-in Web, simple and fast. The product is stable and reliable, resistant to high and low temperatures, and the two packages can be integrated into the embedded development board faster. The products are widely used in application scenarios such as instrumentation, access control, smart home, industrial control machine, and medical equipment. | PUSR | In Stock | New Sealed Under Guarantee | | |
| | | PUSR | In Stock | New Sealed Under Guarantee | | |
| | | PUSR | In Stock | New Sealed Under Guarantee | | |
| | USR-TCP232-E series, is a multi-functional serial port to Ethernet module, is to achieve the direct data transparent transmission between the RJ45 network port and the TTL interface device, USR-TCP232-E2 supports two TTL serial ports, USR-TCP232-ED2 supports three TTL serial ports. Both products use the ST solution's Cortex-M7 core, the main frequency up to 400Mhz, industrial design, faster processing speed, more stable data transmission. Module integrated 10/100M adaptive Ethernet interface, while the internal integration of TCP/IP protocol stack, support MQTT, SSL encryption functions. | PUSR | In Stock | New Sealed Under Guarantee | | |
| | USR-TCP232-T2 is a pin Ethernet module, which realizes the bidirectional transparent transmission from UART to Ethernet. Controllable cost; With 1 Ethernet port, 10/100Mbps speed; Supports custom registration and heartbeat packet mechanisms. Support web page, AT command, serial port, network configuration; Supports timeout restart, automatic IP address acquisition by DHCP, DNS domain name resolution, virtual serial port, and remote firmware upgrade. Serial to ethernet converter modules USR-TCP232-T2 can transmit data transparently between TCP/IP and TTL, and it can also be applied in RS232/ RS485 by level shift circuit. | PUSR | In Stock | New Sealed Under Guarantee | | |
| | USR-K5 is a cost-effective TTL UART to Ethernet module with tiny size that can realize the bi-directional transmission between UART and Ethernet. USR-K5 is used for data transmission between TCP/UDP packets and the UART interface. USR-K series Super network port is a series of serial port to Ethernet modules with different appearance and function positioning, which can quickly realize the data transmission between the serial port and the network port. It has the characteristics of small size, low power consumption, fast speed and strong stability. The TCP/IP protocol stack is integrated inside the module, which can easily complete the networking function of embedded devices, save manpower/material resources and cycles in the development process, so that products can be put into the market faster and enhance competitiveness. The series of products rely on the ten years of technology and application accumulation, reliable performance, comprehensive features, has been widely used in medical devices, building intelligence, large company network, camera monitoring, instrumentation and automation and other products and fields, by the market. According to the appearance of half bag, it is divided into three heavyweight products: USR-K5, USR-K6, and USR-K7. USR-K7 is located in the industrial grade, Cortex-M7 core, strong expansion; USR-K6 is located in Cortex-M0 core, Modbus gateway USR-K5 is located in Cortex-M0 core, domestic core, high cost performance; | PUSR | In Stock | New Sealed Under Guarantee | | |
| | Ethernet Module USR-K7 can quickly realizes bi-directional data transmission stable and reliable.The modules has been tested for a long time at - 40 - 85 C and 7* 24 hours stability pressure test. USR-K series Super network port is a series of serial port to Ethernet modules with different appearance and function positioning, which can quickly realize the data transmission between the serial port and the network port. It has the characteristics of small size, low power consumption, fast speed and strong stability. The TCP/IP protocol stack is integrated inside the module, which can easily complete the networking function of embedded devices, save manpower/material resources and cycles in the development process, so that products can be put into the market faster and enhance competitiveness. The series of products rely on the ten years of technology and application accumulation, reliable performance, comprehensive features, has been widely used in medical devices, building intelligence, large company network, camera monitoring, instrumentation and automation and other products and fields, by the market. According to the appearance of half bag, it is divided into three heavyweight products: USR-K5, USR-K6, and USR-K7. USR-K7 is located in the industrial grade, Cortex-M7 core, strong expansion; USR-K6 is located in Cortex-M0 core, Modbus gateway USR-K5 is located in Cortex-M0 core, domestic core, high cost performance; | PUSR | In Stock | New Sealed Under Guarantee | | |
| | USR-K3 is an embedded TCP/IP modules that integrates the TI Cortex-M4 processor which can provide improved performance and high stability. This module has a high frequency of up to 120 Mbps. The USR-K series integrated super network port is a serial port to Ethernet module with the same appearance and different functions. It can quickly realize the TTL data transmission between serial ports and network ports. It has the characteristics of small volume volume, low power consumption, fast speed and strong stability. The TCP/IP protocol stack is integrated inside the module, which can easily complete the networking function of embedded devices, save manpower/material resources and cycles in the development process, so that products can be put into the market faster and enhance competitiveness. The series of products rely on the ten years of technology and application accumulation, reliable performance, comprehensive features, has been widely used in medical devices, building intelligence, large company network, camera monitoring, instrumentation and automation and other products and fields, by the market. USR-K3 is located in the industrial grade, using TI core Cortex-M4 core, stable and reliable, strong adaptability USR-K2 is located in the commercial grade, Cortex-M0 core, ultra-high cost performance | PUSR | In Stock | New Sealed Under Guarantee | | |
| | | PUSR | In Stock | New Sealed Under Guarantee | | |
| | | PUSR | In Stock | New Sealed Under Guarantee | | |
| | | PUSR | In Stock | New Sealed Under Guarantee | | |
| | | PUSR | In Stock | New Sealed Under Guarantee | | |
| | | PUSR | In Stock | New Sealed Under Guarantee | | |
| | | PUSR | In Stock | New Sealed Under Guarantee | | |
| | | PUSR | In Stock | New Sealed Under Guarantee | | |
| | | PUSR | In Stock | New Sealed Under Guarantee | | |
| | | PUSR | In Stock | New Sealed Under Guarantee | | |
| | WH-L102-L-P is a pin-based, low-frequency half-duplex LoRa module developed based on the Sx1278 solution, which works in the frequency band of 398~525Mhz (silent frequency 470Mhz) and transmits up to 3.5 kilometers. One-to-one and one-to-many wireless data transmission can be realized through simple configuration of serial port, and data can be transmitted transparently, fixed-point transmission, and a variety of low-power modes. The working current is 3-6V, the pin type is easy to use, suitable for a variety of occasions, and convenient for embedded development. NETWORKING MODE LoRa point-to-point transmission, large-distance wireless transmission PROGRAM DEVELOPMENT Pin type, low-frequency half-duplex developed based on the Sx1278 solution LORA SIGNAL DETECTION It is convenient for the on-site LoRa equipment layout LBT, RETRANSMISSION MECHANISM Avoid data interference and packet loss, and improve the | PUSR | In Stock | New Sealed Under Guarantee | | |
| | WH-L101-L is an upgraded version of LoRa wireless data transmission module developed based on Sx1268 chip, with high anti-interference and stability, increase relay networking, signal detection and other functions, more application functions, its working frequency band 410-525Mhz (default frequency 470Mhz), working range 1.9-3.7V, point-to-point use of the minimum sleep current is only 2.5uA, can support point-to-point, with LoRa gateway use, TTL level output. INTELLIGENT AD HOC NETWORKING Nodes are free, forming a flexible and scalable network TRUNK NETWORKING The transmission path of the relay mode is customized, and the module automatically forwards to increase the wireless transmission distance LORA SIGNAL DETECTION It is convenient for the on-site LoRa equipment layout LBT, RETRANSMISSION MECHANISM Avoid data interference and packet loss, and improve the communication success rate | PUSR | In Stock | New Sealed Under Guarantee | | |
| |
| Tenda |
| | TEM2010X is an 8-port 2.5G Ethernet switch with 2*10G SFP+ ports independently designed by Tenda. The switch supports three working modes,establishing high-speed network along with computers, NAS, TV set-up boxes, WiFi6/7 APs and so on. TEM2010X is an ideal access device for high-speed network deployment in SMEs, SOHOs, villas or wireless networking scenarios. 8-Port 2.5G Ethernet Switch with 2*10G SFP+ slots, Break Bandwidth Limitations Equipped with 8*2.5G GE and 2*10G SFP+, all ports support wire-speed forwarding. Through wired transmission, data service traffic is forwarded faster and achieves ultra-low latency. Equipped With NAS Dedicated Mode, Greatly Improving Office Efficiency One-click to open the NAS dedicated mode, the transmission speed is doubled to 5G, and the efficiency is improved. Turn on WIFI7 AP real network speed, Unlimited performance It has 8*2.5G RJ45 ports and 2*10G SFP+ to connect high-speed network devices. It can stimulate the maximum potential of WIFI6/WIFI7 AP. Compared with connecting with a Gigabit Ethernet switch, the performance is not limited and the experience is better. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEM2007X is an 5-port 2.5G Ethernet switch with 2*10G SFP+ Slots independently designed by Tenda. The switch establishing high-speed network along with computers, NAS, TV set-up boxes, WiFi6/7 APs and so on. TEM2007X is an ideal access device for high-speed network deployment in SMEs, SOHOs, villas or wireless networking scenarios. 5-Port 2.5G Ethernet Switch with 2*10G SFP+ slots, Break Bandwidth Limitations Equipped with 5*2.5G GE and 2*10G SFP+, all ports support wire-speed forwarding. Through wired transmission, data service traffic is forwarded faster and achieves ultra-low latency. Turn on WIFI7 AP real network speed, Unlimited performance It has 5*2.5G RJ45 ports and 2*10G SFP+ to connect high-speed network devices. It can stimulate the maximum potential of WIFI6/WIFI7 AP. Compared with connecting with a Gigabit Ethernet switch, the performance is not limited and the experience is better. High Compatibility, Adaptable to Various Networked Devices 10G SFP+ ports supports compatibility with 1G and 2.5G,smooth upgrade, easily upgrade the whole house high-speed networking. Ultra-Small Body, Fit for All Kinds of Information/Weak Current Boxes Based on the design of house type and enterprise application, the body has been made smaller. It is suitable for all kinds of information and weak current boxes. 6KV Professional Lightning Protection Design, Earless of Thunderstorm Weather The switch supports 6 kV lightning protection for ports , reducing the risk of inductive lightning and ensuring stable operation even under thunderstorms. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEM2010F is an 8-port 2.5G Ethernet switch with 2 SFP ports independently designed by Tenda. The switch supports three-mode toggle and offers eight 2.5 Gbps RJ-45 ports and two 2.5 Gbps SFP ports, establishing high-speed network along with computers, NAS, TV set-up boxes, Wi-Fi6 APs and so on.TEM2010F is an ideal access device for high-speed network deployment in SMEs, SOHOs, villas or wireless networking scenarios. 2.5G High-speed Bandwidth,Extremely Fast Experience Equipped with 8*2.5G GE and 2*2.5G SFP, all ports support wire-speed forwarding. Through wired transmission, data service traffic is forwarded faster and achieves ultra-low latency. Turn on WIFI6 AP real network speed,Unlimited performance It has 10*2.5G ports to connect high-speed network devices. It can stimulate the maximum potential of WIFI6AP. Compared with connecting with a Gigabit Ethernet switch, the performance is not limited and the experience is better. Easily Realize High-speed Networking Smooth upgrade, easily upgrade the whole house high-speed networking. Equipped With NAS Dedicated Mode, Greatly Improving Office Efficiency One-click to open the NAS dedicated mode, the transmission speed is doubled to 5G, and the efficiency is improved. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG5328F is a Tenda Layer-3 managed switch. To meet the demand of high-performance access, the switch provides 24 10/100/1000 Mbps Base-T Ethernet ports and 4 separate 1000 Mbps Base-X SFP ports. With an innovative hardware structure and software platform, it features a powerful processing capacity and complete security protection mechanism, making management and maintenance easy and simple, fully meeting the demands of high-density user access and high-performance aggregation, ideal for the aggregation layer or core layer of such medium to large networks as enterprises and campuses. Layer-3 Routing Engine，High-Efficiency Fast Forwarding Supports Layer 3 www routing protocols, supports Layer 3 forwarding of up to 400+ terminals, easily meets Layer 3 routing andforwarding across network segments, and truly achieves Layer 2 network isolation and Layer 3 network interworking. Comparedwith using a Layer 2 switch for transmission, there is no need to go through a router, and the forwarding speed is faster! Flexible QoS, Precise Traffic Control The TEG5328F supports three QoS scheduling modes (SP, SWRR, WRR) for more accurate traffic control. After the QoS function is enabled, the traffic in the network will be precisely controlled according to the priority of the label. It will prioritize important traffic and reduce the proportion of data flows that occupy a large amount of insignificant traffic in the condition of limited bandwidth，in order to better meet the current transmission needs. Supports Layer 2 And Layer 3 ACL，For More Secure Access Support strict access control based on MAC address or IP address, which can filter the corresponding data packets to enhance user network security. It can be used for network deployment of enterprise, medical and other units. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG3328F is an layer-2 managed switch designed by Tenda. Equipped with a developed hardware structure and software platform, this switch features a powerful processing capacity, a complete security protection mechanism, and various means for maintenance and management. With these advantages, it fully meets the demands of high-density connections and high-performance aggregation, ideal for the aggregation layer or core layer of such medium to large networks as enterprises and hotels. The system can generate the network topology automatically. It supports IP camera discovery based on ONVIF protocol and network device discovery based on LLDP, as well as online/offline status detection for all devices in the network, which improves the LAN operation and maintenance efficiency and also reduces the maintenance cost. DHCP Snooping: No fear of the illegal DHCP Servers connected When the switch enables the DHCP Snooping function, by setting trusted Interfaces and untrusted Interface, it can effectively prevent network problems caused by privately connected illegal DHCP Servers. Supports Layer 2 And Layer 3 ACL, For More Secure Access Support strict access control based on MAC address or IP address, which can filter the corresponding data packets to enhance user network security. It can be used for network deployment of enterprise, medical and other units. Layer-2 managed switch: 24 Gigabit (10/100/1000 MBit/s) RJ45 LAN ports and 4 Gigabit SFP ports Management functions: L2 managed switch supports intuitive web interface to manage, configure and monitor the network; supports console port/telnet configuration, SNMP, dual image, ping/tracert/cable test Advanced functions: QoS, VLAN, IGMP snooping, ACL, port security, DoS defense, DHCP snooping, 802.1X, radius authentication, static aggregation, LACP dynamic aggregation 12 MB large buffer: 12 m buffer is three times the size of other brands in the same gear Versatile mounting options: supports desktop, wall and rack mounting | Tenda | In Stock | New Sealed Under Guarantee | | |
| | Developed by Tenda, TEG1050F is a Gigabit unmanaged Ethernet switch designed for establishing wired networks of high density and high speed in such scenarios as enterprises, parks, schools, and internet cafes, providing a simple, easy, cost-effective, and rapid internet access solution for video surveillance and SMBs' networking. With 48 10/100/1000 Mbps RJ45 ports, and 2 independent Gigabit SFP slots that can be paired with Tenda's SFP modules, this switch can be used to deploy a long-distance network up to 20 km. Its full-duplex transmission rate can reach 2000 Mbps, ensuring the timely transmission of large files and smoothness of videos. Its one-key VLAN function can isolate broadcast storms. Its integrated professional lightning protection circuit offers 6 kV lightning protection for the built-in power supply and all Ethernet ports, ensuring the stability and reliability of the switch. The switch supports desktop mounting, rack mounting and wall mounting, and features a 1U 19-inch standard rack-mount shell design and plug & play function. With these advantages, it is an ideal choice for deploying a cost-effective and high-speed network.【Expand Your Network】48× 10/100/1000Mbps RJ45 Ports and 2x Gigabit SFP ports, supporting MAC address learning, auto MDI / MDIX and auto-negotiation; up to 1000 Mbps transfer rate, 10 times faster than Fast Ethernet; up to 2000 Mbps transfer rate in full duplex mode 【One-key VLAN】In this mode, ports 1 to 46 cannot communicate with each other, but can communicate with ports 47 to 50 to isolate broadcast storms and enhancing network security 【12 Mb Large Buffer】The Ethernet switch has a 12Mb large buffer, which can meet the needs of burst traffic network applications such as search engines, IPTV, P2P downloads, etc., ensuring no packet loss, timely transmission of large files, and smooth video 【Plug and play】Just plug and play to expand your network, no configuration required 【Various Mounting Options】The Ethernet splitter supports Desktop / Wall / Rack Mounting, flexible and practical, suitable for actual network engineering 【6 kV Lightning Protection】The gigabit switch features built-in 6 kV lightning protection on all Ethernet ports and supports over-temperature, over-voltage and surge current protection | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG1024D is a 24-port gigabit Ethernet switch independently designed by Tenda. The switch supports wire-speed forwarding of all ports to ensure smooth transmission of large files and video streaming. It features a compact metal body, and supports desktop, wall and rack mounting. As a flexible and simple-to-use device, it can be connected to such network devices as computers and network cameras. It is your ideal choice for video surveillance and wired networking in such scenarios as SMBs, communities, factories, and schools.【Expand Your Network】The 24-port Gigabit switch supports MAC address self-learning, auto MDI / MDIX and auto-negotiation; up to 1000 Mbps transfer rate, 10 times faster than Fast Ethernet; up to 2000 Mbps transfer rate in full duplex mode 【First Choice for Survilliance】Each port of the Gigabit Ethernet switch has an indicator light. You can judge the working status of the network by color and flashing 【Plug and Play】Just plug and play to expand your network, no configuration required. Ideal for beginners 【Versatile Mounting Options】The 24-port network switch supports desktop, wall mount or rack mount, you can put it in the right place according to your usage 【Metal Case & Fanless Design】All-metal case with holes on three sides for more efficient heat dissipation; the fanless design ensures no noise, perfect for office and home 【6 kV Lightning Protection】The 24-port switch features built-in 6 kV lightning protection on all Ethernet ports and supports over-temperature, over-voltage and over-current protection | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG1016G is a 16-port gigabit Ethernet switch independently designed by Tenda. The switch supports wire-speed forwarding of all ports to ensure smooth transmission of large files and video streaming. It features a compact metal body, and supports desktop, wall and rack mounting. As a flexible and simple-to-use device, it can be connected to such network devices as computers and network cameras. It is your ideal choice for video surveillance and wired networking in such scenarios as SMBs, communities, factories, and schools. Gigabit ports, high-speed network The 16-gigabit ports enable you to experience lower latency and faster transfer speed, ensure instant transfer of large files and stable video streams and improve network usage experience in various scenarios. High-performance Chip Achieve True Stability Equipped with high-performance chips, more efficient operation and strong data processing capabilities make the network high-speed and stable. Plug And Play, Make Networking Easier Quick and easy Internet settings, simple enough for you to set up office networking,13-inch body design, and support desktop, wall and rack mounting. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG1016D is a 16-port gigabit Ethernet switch independently designed by Tenda. The switch supports wire-speed forwarding of all ports to ensure smooth transmission of large files and video streaming. It features a compact metal body, and supports desktop, wall and rack mounting. As a flexible and simple-to-use device, it can be connected to such network devices as computers and network cameras. It is your ideal choice for video surveillance and wired networking in such scenarios as SMBs, communities, factories, and schools. Gigabit ports, high-speed network The 16-gigabit ports enable you to experience lower latency and faster transfer speed, ensure instant transfer of large files and stable video streams and improve network usage experience in various scenarios. High-performance Chip Achieve True Stability Equipped with high-performance chips, more efficient operation and strong data processing capabilities make the network high-speed and stable. Plug And Play, Make Networking Easier Quick and easy Internet settings, simple enough for you to set up office networking,13-inch body design, and support desktop, wall and rack mounting. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG1016M is a Gigabit unmanaged Ethernet switch developed by Tenda. Its full-duplex transmission rate can reach 2000 Mbps, ensuring timely transmission of large files and smoothness of videos. The switch features a mini steel shell, a fanless design, and wire-speed forwarding of all ports. It comes with a power adapter for power supply, and can connect to such network devices as computers and IP cameras. The switch also supports one-key isolation mode switching. With the advantages of plug and play functionality, easy installation and high performance, it offers a cost-effective solution for video surveillance and wired networking in such small and medium-sized scenarios as small and micro businesses, villas, and stores. All Gigabit Speed, Enjoy High-Speed Networking The switch provides 16 10/100/1000 Mbps auto-negotiation RJ45 ports. The full-duplex transmission rate of the switch can reach 2000 Mbps, and all ports feature wire speed forwarding, ensuring high performance for processing applications that require high bandwidth. Stable Transmission, Safe And Reliable, Suitable For Small & Micro Office/Home Network TEG1016M's full-duplex transmission rate can reach 2000 Mbps, ensuring timely transmission of large files and smoothness of videos. The switch also supports one-key isolation mode switching. It offers a cost-effective solution for video surveillance and wired networking in such small and medium-sized scenarios as small and micro businesses, villas, and stores. Mini Steel Shell, Wall-mount Design, Plug & Play It supports desktop mounting and wall mounting, and features plug & play functionality and an easy-to-use design. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG1008M is a high-performance 8-port full Gigabit desktop Ethernet switch designed for Tenda's high-speed cascading scenarios for small and medium-sized surveillance, small and medium-sized businesses. Designed with a mini steel shell, it does not take up space and has a strong heat dissipation. Provides 8 10/100/1000 Mbps auto-negotiation ports, which increases transmission rate by 10 times, improves large file forwarding rate, and effectively solves problems such as video jams and picture loss in high-definition surveillance environments. The TEG1008M supports desktop/wall mount installation, plug and play, no setup, easy to use, and is ideal for improving network performance. Gigabit Speed 8 gigabit ports ensure the speed of the transmission of large files and improve transmission efficiency. Support 5-12V DC Input 9-12V DC input design,support centralized power supply and monitor power supply. Wallmount & Plug-n-play support desktop and wallmount,plug-n-play,easy to use. Metal Shell , Stable Operation Full-metal & larger shell ensure effective cooling. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | Tenda TEG1005D is an unmanned layer 2 gigabit switch designed for security surveillance. It provides five 10/100/1000 Mbps auto-negotiation ports that support linespeed forwarding at up to 1000 Mbps. With a fine steel housing, it features excellent durability and heat dissipation performance. 6KV Lightning protection is offered to each port to effectively prevent severe lightning damages to the switch. So, it is a right choice for small and medium sized security surveillance projects in SMBs, parks, plants, renting rooms, and so on. Choose TEG1005D for a faster and more stable gigabit surveillance network. Improve transmission efficiency Support 15K jumbo Frame to speed up the transmission of large files and improve transmission efficiency. Extraordinary heat dissipation A housing made of 0.8 mm galvanized industrial-grade steel plates for excellent durability, heat dissipation performance, ensuring stable switch operation, a long service life, and more reliable outdoor security surveillance. Lightning protection for ports Integrated with professional a lightning protection circuit that offers 6KV lightning protection to each port to effectively prevent lightning-induced current from damaging the ports or switch, so as to ensure the surveillance system stability. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEF1109D is a 9-port fast Ethernet switch developed by Tenda, offering 9 10/100 Mbps RJ45 ports. Equipped with large packet buffer, it also ensures smooth streaming even when 8 HD IP cameras are working simultaneously. You can enable port VLAN mode of the switch to protect your LAN network from broadcast storm and prevent loss of monitoring images. In addition, the switch offers 6 kV lightning protection for its uplink port. In a word, TEF1109D is a perfect choice for small and medium-sized IP surveillance projects and enterprises to have network Excellent Lightning Protection The switch supports 6 kV lightning protection for uplink port,protecting the switch from thunderstorms and making it more stable. Enjoy Super HD Video Screen Equipped with 1024 KB large packet buffer,it ensures smooth streaming even when eight HD IP cameras of 500W are working simultaneously. Transmission Distance up to 250m With the extension technology,data can be transmitted through 250 meters cable which would be a cost-effective replacement for extenders and optical fibers. Easy Port VLAN Setup With VLAN Mode on , ports 1 to 8 are isolated from each other, enabling the switch to isolate broadcast storm, improving LAN security and data transmission. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | Tenda TEF1005D is an unmanaged layer 2 fast switch designed for security surveillance. It provides five 10/100 Mbps auto-negotiation ports that support line-speed forwarding at up to 100 Mbps, ensuring smooth security surveillance video playback. With a fine steel housing, it features excellent durability and heat dissipation performance, ensuring network stability and a long service life. So, it is a right choice for small and medium sized security surveillance projects in SMBs, parks, plants, renting rooms, and so on. Stay connected for 7x24 5 * 10/100Mbps auto-negotiation RJ45 ports that support line-speed forwarding and large-capacity cache, ensuring smooth surveillance video playback and stable data transmission for 7x24. Extraordinary heat dissipation A housing made of 0.8 mm galvanized industrial-grade steel plates for excellent durability, heat dissipation performance, ensuring stable switch operation, a long service life, and more reliable outdoor security surveillance. User-friendly design RJ45 ports and LED indicators are located on the same side and aligned vertically for more intuitively showing network status. The RJ45 ports and the power port are designed in the same orientation to reduce the mounting space requirement, allowing the switch to fit into the slimmest outdoor weak current box. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG1128P-24-410W is a gigabit Unmanaged Ethernet PoE switch designed by Tenda. The switch provides 24 gigabit PoE ports, 2 uplink gigabit RJ45 ports and 2 SFP ports. It supports the IEEE 802.3af/at standard and can automatically detect PDs and supply power. The maximum output power of a single port is 30W, and the power of the whole switch is 410W. It supports rack mounting, one-toggle settings, plug and play, and simple networking. It is an ideal choice for SMBs, hotels, schools, and parks with video surveillance and wireless networking requirements. High speed network transmission, Experience extreme smoothness Full gigabit ports , 56 Gbps non-blocking line speed forwarding, mprove the forwarding rate of large files, ensure smooth and stable transmission of large files and HD videos. GE and SFP Uplink Ports, Easier HD Monitoring With two gigabit uplink port and two gigabit uplink optical fiber port, easily complete low-cost remote networking. Smart PoE Power Supply, Stable Transmission Providing 24 100/1000M PoE ports in accordance with the IEEE802.3AF / AT standard, the maximum PoE output of the whole machine is 370W, and of a single port is 30W. It can provide stable power supply and data transmission for HD PoE IP cameras, APs, etc. 4 Modes for More Scenarios, One-key To Change Smart and Easy The switch supports 4 working modes of Standard, VLAN, Priority and Extend, realizing flexible network deployment in complex cases with lowered cost. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG1120P-16-250W is a gigabit Unmanaged Ethernet PoE switch designed by Tenda. The switch provides 16 gigabit PoE ports, 2 uplink gigabit RJ45 ports and 2 SFP ports. It supports the IEEE 802.3af/at standard and can automatically detect PDs and supply power. The maximum output power of a single port is 30W, and the power of the whole switch is 250W. It supports rack mounting, one-toggle settings, plug and play, and simple networking. It is an ideal choice for SMBs, hotels, schools, and parks with video surveillance and wireless networking requirements. Compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z，IEEE802.3x, IEEE802.3af/at16* 10/100/1000 Base-T Ethernet ports (Data/Power), 2 * 10/100/1000 Base-T Ethernet ports (Data), and 2 * 100/1000 Base-X SFP optical ports8K MAC address and MAC address automatic learningIEEE 802.3x full-duplex flow control and half-duplex backpressure flow control40 Gbps non-blocking wire-speed forwarding backplane bandwidthThe maximum output power of the PoE port is 30 W. The maximum output power of the switch PoE port is 230W.4 Mb large buffer designStandard 1U height, rack mounted switch | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG5328P-24-410W is a Tenda Layer-3 managed PoE switch. To meet the demand of high-performance access, the switch provides 24 10/100/1000 Mbps Base-T Ethernet ports and 4 separate 1000 Mbps Base-X SFP ports, and a PoE power of up to 370 W.With an innovative hardware structure and software platform, it features a powerful processing capacity and complete security protection mechanism, making management and maintenance easy and simple, fully meeting the demands of high-density user access and high-performance aggregation, ideal for the aggregation layer or access layer of such medium to large networks as enterprises and campuses. Comply with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1d, IEEE 802.1s, IEEE 802.3af/at standards 24 x 10/100/1000 Base-T Ethernet ports (Data/Power), 4 separate 1000 Base-X SFP ports 16 K MAC address table and MAC address auto-learning Maximum PoE output power of a single port: 30 W, maximum PoE output power of the whole switch: 370 W Supports abundant services, such as static routing, VLAN, IGMP, QoS, ACL, DHCP Snooping, ARP and Telnet Built-in 6 kV professional lightning protection power, 19 inch/1 u standard rack-mounted design | Tenda | In Stock | New Sealed Under Guarantee | | |
| | | Tenda | In Stock | New Sealed Under Guarantee | | |
| | | Tenda | In Stock | New Sealed Under Guarantee | | |
| |
| UOTEK |
| | | UOTEK | In Stock | New Sealed Under Guarantee | | |
| | UT-62424G series are full Gigabit managed industrial Ethernet switches. It supports up to 28 Gigabit ports, which included 12 Gigabit fiber ports; this enhances the networking flexibility. This series supports port mirroring, VLAN, igmp, QoS, stp/Rstp/Mstp, ACL, and other management, such as Console, Telnet, Web, SNMP, and relay alarm output; it supports layer 3 switching technology(static route/Rip/OSPF/VRRP), which provides safe and reliable solution for industrial automation, intelligent transportation, video monitoring, and other industrial application networking access. ● Supports multiple combination for Gigabit RJ-45 ports and fiber ports ● Supports IGMP Snooping filter multicast packet ● Supports IEEE 802.1Q VLAN ● Supports QoS(IEEE 802.1p/1Q) and TOS/DiffServ ● Supports STP/RSTP and MSTP network redundancy, SNMPv1/v2/v3 ● Adopts RMON to improve network monitor forecast ability ● Supports link aggregation, improve network bandwidth ● Supports ACL, enhance network management safety ● Support port mirroring, convenient for online debug ● Supports port transmission rate limitation, broadcast/multicast/uncertain unitcast storm relieving ● Supports layer 3 switching(static route/Rip/OSPF/VRRP) ● Supports power, port abnormal status relay output alarm function ● Operating temperature: -40~85℃ | YT | In Stock | New Sealed Under Guarantee | | |
| | | UOTEK | In Stock | New Sealed Under Guarantee | | |
| | UT-6406GM series is a high-performance, cost-effective full-gigabit managed industrial Ethernet switch. In order to meet the different requirements of industrial applications, this series adopts a modular design, up to 2 Gigabit optical fiber ports and 4 Gigabit Ethernet electrical ports, which enhances the flexibility of network expansion. This series of switches supports port mirroring, VLAN, IGMP-Snooping, QoS, STP/RSTP/MSTP, ACL access control list and other rich Layer 2 software features and a series of practical management methods, such as Console, Telnet, Web, SNMP, etc. It can better provide safe and reliable solutions for building large-scale local area networks in industrial applications such as factory automation, intelligent transportation, and video surveillance. ● Support various combinations of Ethernet ports and optical ports (compatible with ST/FC/SC/SFP slot interface types)● Support IGMP Snooping to filter multicast packets● Support IEEE 802.1Q VLAN for easy network planning● Support QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase network stability● Support STP/RSTP and MSTP network redundancy and SNMPv1/v2v3 to ensure network security management● Support link aggregation to optimize network bandwidth● Support access control list (ACL) to enhance flexibility and network management security● Support port mirroring function, which is convenient for online debugging● Support port rate limit, broadcast storm suppression, multicast storm suppression, unknown unicast storm suppression, to ensure network stability● Support power supply and port abnormal state relay output alarm function● Support wide temperature operation, operating temperature range is -40~85℃ | YT | In Stock | New Sealed Under Guarantee | | |
| | | UOTEK | In Stock | New Sealed Under Guarantee | | |
| | UT-6406G-220 series is an unmanaged full Gigabit Ethernet switch, supporting 2 Gigabit fiber ports and 4 Gigabit Ethernet ports, plug and play; this series of switches adopts low power consumption and fan-less design to ensure non-noise interference. At the same time, it supports -40~85℃ operating temperature and good EMC electromagnetic compatibility performance, which ensures stable work in harsh industrial environments, and is used for factory automation, intelligent transportation, video surveillance and other industrial application to set up fast and stable network terminal access network and provide safe and reliable solutions. ● Adopt high-quality opto-electronic integrated modules to provide good optical and electrical characteristics, to Ensure reliable data transmission and long lifecycle.● Network port supports automatic cross identification, no need to manually operate the switch.● Plug and play, easy to use.● Operating temperature: -40℃～85℃.● Voltage input: 110/220VAC(88~264VAC)/50-60Hz or 110/220VDC (88~264VDC) This device supports dual power redundant input. | YT | In Stock | New Sealed Under Guarantee | | |
| | UT-65208F series are managed industrial Ethernet switches with serial ports. It supports various combinations of 100M optical and electrical ports, 4 serial ports (RS232/485/422), plug and play, and one console port, providing CLI management; it supports Ethernet Layer 2 protocols required by industrial sites, ensuring the stability of the communication network; this series of switches adopts low power consumption and fan-less design to ensure no noise interference, and supports -40~85°C operating temperature and good EMC to ensure stable operation in harsh industrial environments. Also providing a safe and reliable solution to build a fast and stable access network for industrial applications such as plant automation, intelligent transportation and video surveillance. ● Data control: Supports full duplex flow control and network storm suppression● Redundant network: Supports STP/RSTP/MSTP, supports UT Ring ring function to ensure the stability of the network● Multicast management: Supports IGMP Snooping v1/v2/v3● VLAN: Supports IEEE 802.1Q VLAN, effectively isolate broadcastdomain● Link Aggregation: Supports static/dynamic link aggregation to provide sufficient bandwidth utilizationQOS: Supports COS, DSCP, 4 queues, WRR, SP scheduling mode● Security management: Supports ACL access control list, support 802.1x, support user grading management● Management function: Supports CLI, WEB, SNMP management mode● Monitoring and maintenance: Supports port mirroring, interface status monitoring and log management functions● Alarm function: Supports power, port, UT-Ring abnormal state relay output alarm function | YT | In Stock | New Sealed Under Guarantee | | |
| | The UT-63424G series is a high-performance, cost-effective managed 10 Gigabit industrial Ethernet Layer 3 switch. The series includes two models that provide 16 Gigabit SFP network interfaces (or 16 Gigabit Ethernet interfaces), 4 10 Gigabit SFP+ interfaces and 8 Gigabit composite interfaces, which not only increase bandwidth and improve network data communication, but also are ideal for large-scale industrial network applications. The series products support a variety of Layer 2 software features (port mirroring, VLAN, port aggregation, IGMP Snooping, QoS, STP/RSTP/MSTP, etc.) and basic IPv4/IPv6 Layer 3 routing protocols (static routing/RIP/OSPF/VRRP), providing users with a complete solution to better build large scale industrial networks for plant automation, intelligent transportation. It provides more options to build large local area networks for industrial applications such as plant automation, intelligent transportation, video surveillance, etc.Support 16 Gigabit SFP network interfaces (or 16 Gigabit Ethernet interfaces) + 4 10Gbps SFP+ interfaces + 8 Gigabit Combo ports10Gbps SFP+ interface supports 10Gigabit/Gigabit adaptiveSupport IGMP Snooping/MLD Snooping to filter multicast packetsIEEE 802.1Q VLAN support for easy network planningSupports QoS with 8 queue mapping to increase network stabilitySupport STP/RSTP and MSTP network redundancySupport SNMPv1/v2v3 to ensure network security managementSupports link aggregation (static convergence/LACP) to optimize network bandwidthSupport Access Control List (ACL) to enhance flexibility and network management securitySupport port mirroring function for online debuggingSupport port speed limit\broadcast storm suppression\multicast storm suppression\unknown unicast storm suppressionSupport Layer 3 switching function (static route/Rip/OSPF/VRRP)Support power supply, port abnormal state relay output alarm functionOperating temperature: -40~75°CSupport IP40 protection, fan-less, industrial grade, rack-mounted design | UOTEK | In Stock | New Sealed Under Guarantee | | |
| | | UOTEK | In Stock | New Sealed Under Guarantee | | |
| | | UOTEK | In Stock | New Sealed Under Guarantee | | |
| | | UOTEK | In Stock | New Sealed Under Guarantee | | |
| | | UOTEK | In Stock | New Sealed Under Guarantee | | |
| | | UOTEK | In Stock | New Sealed Under Guarantee | | |
| | | UOTEK | In Stock | New Sealed Under Guarantee | | |
| | | YT | In Stock | New Sealed Under Guarantee | | |
| | UT-62424F series are managed industrial Ethernet switches. It supports up to 28 ports, which included 4 Gigabit ports; this enhances the networking flexibility. This series supports port mirroring, VLAN, igmp, QoS, stp/Rstp, and other management, such as Console, Telnet, Web, SNMP, and relay alarm output. This provides safe and reliable solution for industrial automation, intelligent transportation, video monitoring, and other industrial application networking access. ● Supports multiple combination for Gigabit Ethernet ports and fiber ports ● Supports IGMP Snooping and GMRP filter multicast packet ● Supports port-based VLAN, IEEE 802.1Q VLAN and GVRP ● Supports QoS(IEEE 802.1p/1Q) and TOS/DiffServ ● Supports STP/RSTP, SNMPv1/v2/v3 ● Adopts RMON to improve network monitor forecast ability ● Supports UT-ring, single ring and intersect ring ● Support port mirroring, convenient for online debug ● Supports transmission rate port limitation, broadcast/multicast/uncertain unitcast storm relieving ● Supports power, port, UT-ring, temperature abnormal status relay output alarm ● Operating temperature: -40~85℃ | YT | In Stock | New Sealed Under Guarantee | | |
| | UT-60424G series are unmanaged industrial Ethernet switches. It adopts modular design, meets different industrial communication requirements. This series adopt fanless design, without noise interference; meanwhile, the operating temperature range is from -40~85℃; together with good EMC compatibility, it provides safe and reliable solution for industrial automation, intelligent transportation, video transmission, and other industrial application networking access.Specification ● Max supports 28 ports, multiple combination for Ethernet ports and fiber ports● Supports different fiber ports, with optional ST/SC/FC/SFP slot● Ethernet ports support full/half-duplex, auto MDI/MDI-X● Supports store-and-forward● Supports ESD level 4 & surge level 4 protection● Operating temperature: -40~85℃● MTBF>500,000h● Non-blocking, full line forwarding● IP40, fanless design● Supports power alarm | YT | In Stock | New Sealed Under Guarantee | | |
| | UT-60424F series are unmanaged industrial Ethernet switches. It adopts modular design, meets different industrial communication requirements. This series adopt fanless design, without noise interference; meanwhile, the operating temperature range is from -40~85℃; together with good EMC compatibility, it provides safe and reliable solution for industrial automation, intelligent transportation, video monitoring, and other industrial application networking access. ● Supports multiple combination for Ethernet ports and fiber ports● Max supports 28 ports● Supports different fiber ports, with optional ST/SC/FC/SFP slot● Ethernet ports support full/half-duplex, auto MDI/MDI-X● Supports store-and-forward● Supports ESD level 4 & surge level 4 protection● Operating temperature: -40~85℃● Non-blocking, full line forwarding● IP40, fanless design● Supports power alarm | YT | In Stock | New Sealed Under Guarantee | | |
| | UT-64216 Rackmount Gigabit Ethernet Switch offers 16x 10/100M self-adaptation RJ-45 ports, each supporting automatic MDI/MDIX function, which not only overcomes the inconvenience of cable making and use, but also enables the “pluggable” installation. Both straight-through cable and crossover cable can connect any port of UT-64216 to any port of other network devices. With energy-saving technology, UT-64216 switch may, by the detection of network cable length and working load, realize automatic adjustment of signal intensity to effectively reduce energy consumption. The product is easy and flexible for using, and it is convenient for installation and highly cost-effective and thus an ideal choice for you to increase the server speed.Compliant with Ethernet standards – IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.1D, IEEE802.1p, and 802.3z 2 Gigabit 1000BASE-X(SFP) ports; 16 10/100BASE-T(X) ports Auto MDI/MDIX Built-in store-and-forward function Automatic address tuning function Support IEEE802.3x full duplex flow control and mandatory half duplex flow control Industrial fanless heat radiation design, industrial protection Operating temperature: - 40 ℃ - 85 ℃ | YT | In Stock | New Sealed Under Guarantee | | |
| | UT-64216/64224 Rackmount 24+2G Gigabit Ethernet Switch offers twenty four 10/100M self-adaptation twisted pair cable ports, each supporting automatic MDI/MDIX function, which not only overcomes the inconvenience of cable making and use, but also enables the “pluggable” installation. Both straight-through cable and crossover cable can connect any port of UT-64224 to any port of other network devices. With energy-saving technology, UT-64224 switch may, by the detection of network cable length and working load, realize automatic adjustment of signal intensity to effectively reduce energy consumption. The product is easy and flexible for using, and it is convenient for installation and highly cost-effective and thus an ideal choice for you to increase the server speed.Compliant with Ethernet standards – IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.1D, IEEE802.1p, and 802.3z 2 Gigabit 1000BASE-X(SFP) support ports; 24 10/100BASE-T(X) support ports Auto MDI/MDIX Built-in Store-and-forward function Automatic address tuning function Support IEEE802.3x full duplex flow control and mandatory half duplex flow control Industrial fanless heat radiation design, industrial protection Industrial working temperature: - 40 ℃ - 85 ℃ | YT | In Stock | New Sealed Under Guarantee | | |
| |
| ZLAN |
| | SummaryZLAN5143I is a high reliability and high performance serial device server and Modbus Gateway product designed by Shanghai ZLAN special for lightning resistance, anti-electromagnetic interference and resisting bad environment requirements, is the flagship product on serial device server. Can be applied to industrial application requiring anti-jamming, anti-tunnel monitoring, wind power, field geological disasters monitoring and so on.ZLAN5143I has good interface isolation characteristic. The RS485/422 not only have ±15V antistatic, but also have 2500V interface isolation, as adding 2500V AC voltage between RS485 wire and shell, the current leakage into ZLAN5143 is less than 5 mA.The RS485 of ZLAN5143I can drive 256 load capacity, compared to the product driving 32 loads, it can achieve the ability of monitoring more equipment to save cost.ZLAN5143I has three interface types: RS232/485/422. The input voltage can provide DC Q2. 1 jack or terminal type, the input voltage is 18~36V (can be customized 12V). It can be equipped with guide installation accessories.FeaturesInterface insolation: the power can reach 3KV insolation voltage; RS485/422 can reach 2.5KV insolation voltage; ±15KV ESD protection function; More than 25KV/US high common mode transient suppression. RS485/422 has the ability of 256 loads. Three interface types: RS232/485/422. RS422 needs customized internal jumpers, should be informed before buying. Support 18~24V power supply, interface are DC Q2. 1 jack and terminal wiring. Can be customized 12V power input. Having both functions: serial device server with transparent transmission and Modus gateway. Under transparent transmission, support full duplex, high speed data forwarding, no packet loss; Modbus gateway use storage type, the speed is faster than general forwarding mode. Support TCP Server, TCP Client, UDP mode, UDP multicast. The baud rate support 1200~115200bps, the data bits support 5~9, check bits can be five types: None, Odd, Even, Mark, Space, support CTS/RTS hardware flo | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | SummaryZLAN5142I is a high reliability and high performance serial device server and Modbus Gateway product designed by Shanghai ZLAN special for lightning resistance, anti-electromagnetic interference and resisting bad environment requirements, is the flagship product on serial device server. Can be applied to industrial application requiring anti-jamming, anti-tunnel monitoring, wind power, field geological disasters monitoring and so on. ZLAN5142I has good interface isolation characteristic. The RS485/422 not only have ±15V antistatic, but also have 2500V interface isolation, as adding 2500V AC voltage between RS485 wire and shell, the current leakage into ZLAN5143 is less than 5 mA. The RS485 of ZLAN5142I can drive 256 load capacity, compared to the product driving 32 loads, it can achieve the ability of monitoring more equipment to save cost.ZLAN5142I has three interface types: RS232/485/422. The input voltage can provide DC Q2. 1 jack or terminal type, the input voltage is 18~36V (can be customized 12V). It can be equipped with guide installation accessories.FeaturesInterface insolation: the power can reach 3KV insolation voltage; RS485/422 can reach 2.5KV insolation voltage; ±15KV ESD protection function; More than 25KV/US high common mode transient suppression. RS485/422 has the ability of 256 loads. Three interface types: RS232/485/422. RS422 needs customized internal jumpers, should be informed before buying. Support 18~24V power supply, interface are DC Q2. 1 jack and terminal wiring. Can be customized 12V power input. Having both functions: serial device server with transparent transmission and Modus gateway. Under transparent transmission, support full duplex, high speed data forwarding, no packet loss; Modbus gateway use storage type, the speed is faster than general forwarding mode. Support TCP Server, TCP Client, UDP mode, UDP multicast. The baud rate support 1200~115200bps, the data bits support 5~9, check bits can be five types: None, Odd, Even, Mark, Space, support CTS/RTS hardware flow control. If need to support 460800bps, choose model ZLAN5142I. Rich single light: power, wiring connection, TCP connection, data activity. Support multiple TCP connection, as a TCP Server, can be connected with 40 clients. As a TCP Client, can connect with 8 different destination IP and port at the same time. Real COM Driver support multicomputer communication though the 9th (address frame is 1, data frame is 0). Support remotely searching 5143I and configuring parameters through internet, can upgrading procedure and downloading configuration Webpage through Ethernet port. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | ZLAN5143BI is an RS485/422 serial port serial server with isolation, which can effectively isolate the impact of interference on the RS485 bus on the working of the device and ensure the stability of the device. It is suitable for use in environments where RS485 bus interference is present. Built-in power lightning protection, 9~48V wide voltage. RS485/422 supports 256 loads. At the same time, ZLAN5143BI also has RS232 interface, non-opto-decoupled isolation. The ZLAN5143BI network port supports 10M/100M adaptive network. It can realize the conversion of TCP/IP protocol to RS485/422/232, which is convenient for data collection of serial port equipment through the network. The network terminal can use the virtual serial port to connect the serial port software or direct TCP/IP communication software. ZLAN5143BI supports the Modbus RTU to Modbus TCP conversion function and has the characteristics of a storage-based Modbus gateway. Of course, it can also be used as a non-storage Modbus gateway. ZLAN5143BI can be applied to:Power electronics, smart meters and energy consumption monitoring;As an IoT gateway as a communication bridge between devices and the cloud;Remote monitoring and program download of various types of automation PLC;All kinds of configuration software and equipment communication interfaces;Access control and security in the field of equipment networking;Networked information collection of medical equipment; A typical application connection is shown in the diagram. The original serial port device and the serial port connection of the ZLAN5143BI, 5143BI is connected to the computer through the network cable. The software on the computer establishes a connection with 5143BI through TCP/IP or virtual serial port. Thereafter, any data sent by the serial device will be transparently transmitted to the computer's software, and the data sent by the software to the ZLAN5143BI over the network will also be transparently transmitted to the serial device. Hardware features:RS485/422 serial port optocoupler isolation, isolation voltage 1500V. It is suitable for strong interference environments where ordinary serial port servers cannot work normally. Effectively isolate the ground circuit between the serial device and the serial server. Built-in power lightning protection: Built-in varistor and ceramic discharge tube can effectively protect the internal circuit of the serial server in the case of power surge. Industrial-grade power supply mode: It has two power supply wiring methods: terminal block and power plug, which is convenient for industrial use. It can be supplied with a wide voltage of 9~48V. It has RS232/485/422 serial interfaces. RS485/422 has a load capacity of 256. Network port 2KV surge protection. Abundant panel indicators for easy debugging: in terms of connection, there are not only 100M_LINK lights that indicate whether the network cable is connected well, but also LINK lights that indicate the establishment of TCP connections, and independent indicators of "serial port to network port" and "network port to serial port" in terms of data indicators. Convenient for on-site commissioning.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. When you are a TCP client, you can also support the TCP server-side function. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 1200~115200bps, the data bit supports 5~9 bits, and the check bit can be no check, odd check, even check, mark, and space, and supports CTS/RTS hardware flow control and XON/XOFF soft flow control. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, and also supports Modbus gateway in non-storage mode. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewThe ZLAN5143-232 is specially designed for the application field where RS232 needs to be isolated, effectively isolating interference between RS232 devices. The ZLAN5143-232 enables transparent data forwarding between RS232/485/422 and TCP/IP. It is convenient to connect serial port equipment to Ethernet and the Internet, and realize the network upgrade of serial port equipment. Support RS232/422 interface for full-duplex, uninterrupted communication, RS485/422 embedded 485/422 lightning protection, RS485/422 and RS232 can be used at the same time without switching. DHCP and DNS are supported. It supports virtual serial port, and the original serial port PC software does not need to be modified. ZLAN5143-232 converts Modbus TCP to Modbus RTU. ZLAN5143-232 is a new generation of high-performance serial server developed by Shanghai ZLAN based on ZLAN1003. It has the characteristics of strong function and high cost performance.PeculiaritySupports full-duplex, high-speed data forwarding without packet loss. Economical price TCP Server, TCP Client, UDP mode, and UDP multicast are supported. The baud rate supports 1200~115200bps, the data bit supports 5~9 bits, and the check bit can be None, odd check, even check, Mark, Space five modes, and supports CTS/RTS hardware flow control. Built-in 485/422 lightning protection for outdoor 485/422 communications. It is equipped with Windows virtual serial port & device management tool ZLVircom for free, supports virtual serial port, and can search for ZLAN5143-232 with one click and modify parameters. Provides a device management library (Windows DLL dynamic link library) to facilitate users to develop applications with VC, VB, Delphi, and C++Builder. Users only need to use read, write, and other interface functions to communicate with ZLAN5143-232. The innovative network disconnection detection mechanism can automatically re-establish the connection after the ZLAN5143-232 works in TCP Server mode or TCP Client mode, ensuring real-time data accessibility. Built-in web server, module parameters can be modified via a browser. DHCP is supported to solve IP management and IP conflict problems. DNS is supported to meet the requirements for communication through domain names. Supports up to 30 TCP connections to communicate with networking modules at the same time. When you are a TCP client, you can connect to 8 destination IPs. Flexible serial port data framing settings to meet various subcontracting needs of users. UDP mode supports dynamic destination mode, which is convenient for multiple users to manage the same networking module at the same time. Real COM Driver supports multi-machine communication via bit 9 (address frame 1 and data frame 0). Supports remote Internet discovery of ZLAN5143-232 and configuration of ZLAN5143-232 parameters. Parameter write-protection is supported to prevent accidental modification. The default parameter startup function is supported. 2KV level network port surge protection. High strength against electromagnetic interference, with radiation-resistant SECC plates in the housing. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5143D is an RS485 device data collector/IoT gateway specially designed for industrial environments, which has multiple functions such as serial server, Modbus gateway, MQTT gateway, RS485 to JSON and so on. It has an RS485 interface and an Ethernet interface. It adopts the guide rail type installation method, which is small in size and easy to install. Terminal type power supply is used, and the voltage input is 9~24V. Since there is only an RS485 interface, the RS232 interface that is not commonly used on industrial instruments is canceled, which saves cost and volume, and has a higher cost performance compared with ordinary products. Now ZLAN5143D launched the black model, the black model adopts a high-temperature flame-retardant shell, the shell is not deformed at a high temperature of 110 degrees, does not support combustion, and is extinguished immediately after leaving the fire source. New customers are recommended to choose the black version of the 5143D.When used as an ordinary serial port server, the network port of 5143D is connected to the Ethernet, and the host computer software can use TCP/UDP transparent transmission mode or virtual serial port mode to send data to the RS485 interface of 5143D, and the data received on the RS485 interface will also be transmitted to the software or virtual serial port of the TCP end. In the virtual serial port mode, the serial port software connected to the virtual serial port can be used without need. When used as a Modbus gateway, the 5143D supports Modbus TCP to Modbus RTU, so that the host computer can use the Modbus TCP protocol to collect data from RS485 Modbus RTU devices. Conversely, if the RS485 side is used as a master, it can also be used. The 5143D supports advanced Modbus gateway functions, including configurable Modus gateway ZLMB and storage Modbus gateway, which fully meets the various configurations and usage of Modbus gateways. Its multi-master capability allows multiple computer masters to access an RS485 slave at the same time. When used as an MQTT gateway, the device can upload serial port data to the MQTT server using the MQTT protocol in transparent transmission mode, and the supported servers include Baidu Cloud MQTT, Alibaba Cloud MQTT, and China Mobile OneNet platform. The collected Modbus RTU or non-standard serial port data can be parsed into JSON format and encapsulated in MQTT packets for upload. Support JSON format upload and collect data, automatic data collection, data collection support Modbus RTU, 645 instrument 97 version, 645 instrument 07 version, various non-standard RS485 protocols. Users can use ZLVircom to configure the uploaded data format and JSON keywords. MQTT protocol, HTTP POST protocol, HTTP GET protocol, transparent transmission protocol, and various non-standard network protocols can be supported during upload. ZLAN5143D has all kinds of functions of powerful IoT gateway, which is very suitable for the collection of various RS485 meters and sensors in the industrial field, including the collection of local networks or the independent collection and transmission of upload to cloud servers. ZLAN5143D can be applied to: As an IoT gateway, it acts as a communication bridge between devices and the cloud; Power, smart meters, and energy consumption monitoring; Remote monitoring and program download of various types of automated PLCs; All kinds of configuration software and equipment communication interfaces; Access control and security equipment networking;Peculiarity Hardware features:Din rail design: suitable for internal installation of cabinets in industrial fields. Small size: Compared with ordinary serial servers, the width is small and does not take up space. Terminal power supply, 9~24V wide voltage input, with reverse power supply protection. Terminal RS485 interface, support 32 slave devices, baud rate support 300~115200bps. Abundant panel indicators for easy debugging: In terms of connection, there are not only LINK lights that indicate whether the network cable is connected, but also LINK lights that indicate the establishment of TCP connections, and independent indicators of "serial port to network port" and "network port to serial port" in terms of data indicators.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. As a TCP client, it also supports TCP server-side functions. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 1200~115200bps, the data bit supports 5~9 bits, and the check bit can be no check, odd check, even check, mark, and space. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, Modbus gateway in non-storage mode, and Modbus gateway function of ZLMB configurable table. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. The MQTT gateway function is supported. It supports JSON to Modbus RTU and 645 meter protocols, and supports HTTP POST AND HTTP GET formats to upload data. Support NTP protocol to obtain network time, which is used for serial port output, and the latter is used for protocol content uploading. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5103K is an RS232 device data collector/IoT gateway specially designed for industrial environments, with serial server, Modbus gateway, MQTT gateway, RS232 to JSON and other functions in one. It has an RS232 interface and an Ethernet interface. It supports rail-type installation or desktop screw hole installation, which is compact and easy to install. Terminal type power supply is used, and the voltage input is 9~24V. It saves cost and volume, and has a higher cost performance compared with ordinary products. When used as an ordinary serial port server, the network port of 5103K is connected to the Ethernet, and the host computer software can use TCP/UDP transparent transmission mode or virtual serial port mode to send data to the RS232 interface of 5103K, and the data received on the RS232 interface will also be transmitted to the software or virtual serial port on the TCP end. In the virtual serial port mode, the serial port software connected to the virtual serial port can be used without need. When used as a Modbus gateway, the 5103K supports Modbus TCP to Modbus RTU, so that the host computer can use the Modbus TCP protocol to collect data from RS232 Modbus RTU devices. Conversely, if the RS232 side is used as a master, it can also be used. The 5103K supports advanced Modbus gateway functions, including configurable Modus gateway ZLMB and storage Modbus gateway, which fully meets the various configurations and usage of Modbus gateways. Its multi-master capability allows multiple computer masters to access an RS232 slave at the same time. When used as an MQTT gateway, the device can upload serial port data to the MQTT server using the MQTT protocol in transparent transmission mode, and the supported servers include Baidu Cloud MQTT, Alibaba Cloud MQTT, and China Mobile OneNet platform. The collected Modbus RTU or non-standard serial port data can be parsed into JSON format and encapsulated in MQTT packets for upload. Support JSON format upload of collected data, automatic data collection, data collection support Modbus RTU, 645 instrument 97 version, 645 instrument 07 version, various non-standard RS232 protocols. Users can use ZLVircom to configure the uploaded data format and JSON keywords. MQTT protocol, HTTP POST protocol, HTTP GET protocol, transparent transmission protocol, and various non-standard network protocols can be supported during upload. Among them, ZLAN5103KN model supports P2P networking, which does not need to be transferred through the server and connects to the device through ID. ZLAN5103K has all the functions of a powerful IoT gateway, which is very suitable for the collection of various RS232 meters and sensors in the industrial field, including the collection of local networks or the independent collection and transmission of uploads to cloud servers. ZLAN5103K can be applied to: As an IoT gateway, it acts as a communication bridge between devices and the cloud; Power, smart meters, and energy consumption monitoring; Remote monitoring and program download of various RS232 interface automation PLCs; RS232 interface for various configuration software and equipment communication; Access control and security equipment networking; A typical application connection is shown in Figure 3. The original serial port device RS232 and the ZLAN5103K RS232 port are connected, and the 5103K is connected to the computer through a network cable. The software on the computer establishes a connection with the 5103K through TCP/IP or virtual serial port. Thereafter, any data sent by the serial device will be transparently transmitted to the computer's software, and the data sent by the software to the ZLAN5103K over the network will also be transparently transmitted to the serial device. Peculiarity Hardware features:Multi-mounting design: support panel mounting/rail mounting. Small size: Compared with ordinary serial servers, the width is small and does not take up space. Terminal power supply, 9~24V wide voltage input, with reverse power supply protection. Terminal RS232 interface, baud rate supports 300~921600bps. It has RS232 hardware interface protection. Abundant panel indicators for easy debugging: In terms of connection, there are not only LINK lights that indicate whether the network cable is connected, but also LINK lights that indicate the establishment of TCP connections, and independent indicators of "serial port to network port" and "network port to serial port" in terms of data indicators.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. When acting as a TCP client, it also supports TCP server-side functions. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 300~921600bps, the data bit supports 7~8 bits, and the check bit can be no check, odd check, even check, mark, and space. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, Modbus gateway in non-storage mode, and Modbus gateway function of ZLMB configurable table. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. The MQTT gateway function is supported. It supports JSON to Modbus RTU and 645 meter protocols, and supports HTTP POST AND HTTP GET formats to upload data. Support NTP protocol to obtain network time, which is used for serial port output, and the latter is used for protocol content uploading. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5143K is an RS485 device data collector/IoT gateway specially designed for industrial environments, which has multiple functions such as serial server, Modbus gateway, MQTT gateway, RS485 to JSON and so on. It has an RS485 interface and an Ethernet interface. It supports rail-type installation or desktop screw hole installation, which is compact and easy to install. Terminal type power supply is used, and the voltage input is 9~24V. It saves cost and volume, and has a higher cost performance compared with ordinary products. When used as an ordinary serial port server, the network port of 5143K is connected to the Ethernet, and the host computer software can use TCP/UDP transparent transmission mode or virtual serial port mode to send data to the RS485 interface of 5143K, and the data received on the RS485 interface will also be transmitted to the software or virtual serial port on the TCP side. In the virtual serial port mode, the serial port software connected to the virtual serial port can be used without need. When used as a Modbus gateway, the 5143K supports Modbus TCP to Modbus RTU, so that the host computer can use the Modbus TCP protocol to collect data from RS485 Modbus RTU devices. Conversely, if the RS485 side is used as a master, it can also be used. The 5143K supports advanced Modbus gateway functions, including configurable Modus gateway ZLMB and storage Modbus gateway, fully meeting the various configurations and usage of Modbus gateways. Its multi-master capability allows multiple computer masters to access an RS485 slave at the same time. When used as an MQTT gateway, the device can upload serial port data to the MQTT server using the MQTT protocol in transparent transmission mode, and the supported servers include Baidu Cloud MQTT, Alibaba Cloud MQTT, and China Mobile OneNet platform. The collected Modbus RTU or non-standard serial port data can be parsed into JSON format and encapsulated in MQTT packets for upload. Support JSON format upload and collect data, automatic data collection, data collection support Modbus RTU, 645 instrument 97 version, 645 instrument 07 version, various non-standard RS485 protocols. Users can use ZLVircom to configure the uploaded data format and JSON keywords. MQTT protocol, HTTP POST protocol, HTTP GET protocol, transparent transmission protocol, and various non-standard network protocols can be supported during upload. Among them, ZLAN5143KN model supports P2P networking, which does not need to be transferred through the server, and connects the device through ID. ZLAN5143K has all kinds of functions of powerful IoT gateways, which is very suitable for the collection of various RS485 meters and sensors in the industrial field, including the collection of local networks or the independent collection and transmission of uploads to cloud servers. ZLAN5143D can be applied to: As an IoT gateway, it acts as a communication bridge between devices and the cloud; Power, smart meters, and energy consumption monitoring; Remote monitoring and program download of various RS485 interface automation PLCs; RS485 interface for various configuration software and equipment communication; Access control and security equipment networking; A typical application connection is shown in Figure 2. The original serial port device RS485 and the ZLAN5143K RS485 port are connected, and the 5143K is connected to the computer through a network cable. The software on the computer establishes a connection with the 5143K through TCP/IP or virtual serial port. Thereafter, any data sent by the serial device is transparently transmitted to the computer's software, and the data sent by the software to the ZLAN5143K over the network is transparently transmitted to the serial device. Peculiarity Hardware features:Multi-mounting design: support panel mounting/rail mounting. Small size: Compared with ordinary serial servers, the width is small and does not take up space. Terminal power supply, 9~24V wide voltage input, with reverse power supply protection. Terminal RS485 interface, support 32 slave devices, baud rate support 300~115200bps. Abundant panel indicators for easy debugging: In terms of connection, there are not only LINK lights that indicate whether the network cable is connected, but also LINK lights that indicate the establishment of TCP connections, and independent indicators of "serial port to network port" and "network port to serial port" in terms of data indicators.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. As a TCP client, it also supports TCP server-side functions. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 1200~115200bps, the data bit supports 5~9 bits, and the check bit can be no check, odd check, even check, mark, and space. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, Modbus gateway in non-storage mode, and Modbus gateway function of ZLMB configurable table. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. The MQTT gateway function is supported. It supports JSON to Modbus RTU and 645 meter protocols, and supports HTTP POST AND HTTP GET formats to upload data. Support NTP protocol to obtain network time, which is used for serial port output, and the latter is used for protocol content uploading. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5107 is an RS232/485/422 device data collector/IoT gateway specially designed for industrial environments, which has multiple functions such as serial server, Modbus gateway, MQTT gateway, RS232/485/422 to JSON and so on. It has 3 interfaces: RS232/485/422 (choose one to use) and one Ethernet interface. It supports desktop screw hole installation and is easy to install. It is powered by terminal type power supply/5.5MM round hole adapter, and the voltage input is 9~24V. Compared with ordinary serial servers, it has a higher cost performance.When used as an ordinary serial port server, connect the network port of 5107 to the Ethernet, and the host computer software can use TCP/UDP transparent transmission mode or virtual serial port mode to send data to the serial port of 5107, and the data received on the serial port will also be transmitted to the software or virtual serial port on the TCP side. In the virtual serial port mode, the serial port software connected to the virtual serial port can be used without need. When used as a Modbus gateway, the 5107 supports Modbus TCP to Modbus RTU, so that the host computer can use the Modbus TCP protocol to collect data from RS232/485/422 Modbus RTU devices. Conversely, if the serial port end is used as a master, it can also be used. The 5107 supports advanced Modbus gateway functions, including configurable Modus gateway ZLMB and storage Modbus gateway, which fully meets the various configurations and usage of Modbus gateways. Its multi-master function allows multiple computer masters to access a slave device with an RS232/485/422 serial port at the same time. When used as an MQTT gateway, the device can upload serial port data to the MQTT server using the MQTT protocol in transparent transmission mode, and the supported servers include Baidu Cloud MQTT, Alibaba Cloud MQTT, and China Mobile OneNet platform. The collected Modbus RTU or non-standard serial port data can be parsed into JSON format and encapsulated in MQTT packets for upload. Support JSON format upload of collected data, automatic data collection, data collection support Modbus RTU, 645 instrument 97 version, 645 instrument 07 version, can customize various non-standard serial port protocols. Users can use ZLVircom to configure the uploaded data format and JSON keywords. When uploading, it can support MQTT protocol, HTTP POST protocol, HTTP GET protocol, transparent transmission protocol, and various non-standard network protocols can be customized. ZLAN5107 has all the functions of a powerful IoT gateway, which is very suitable for the collection of various serial instruments and sensors in the industrial field, including the collection of local networks or the independent collection and transmission of uploads to cloud servers.PeculiarityIndustrial-grade power supply mode: It has two power supply wiring methods: terminal block and power plug, which is convenient for industrial use. It can be supplied with a wide voltage of 9~24V. It has RS232/485/422 serial interfaces. You can choose one to use. Network port 2KV surge protection. Abundant panel indicators for easy debugging: In terms of connection, there are not only LINK lights that indicate whether the network cable is connected, but also LINK lights that indicate the establishment of TCP connections, and independent indicators of "serial port to network port" and "network port to serial port" in terms of data indicators. TCP server, TCP client, UDP mode, and UDP multicast are supported. When acting as a TCP client, it also supports TCP server-side functions. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 300~921600bps, the data bit supports 7~8 bits, and the check bit can be no check, odd check, even check, mark, and space. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function. It supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, Modbus gateway in non-storage mode, and Modbus gateway function of ZLMB configurable table. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. The MQTT gateway function is supported. It supports JSON to Modbus RTU and 645 meter protocols, and supports HTTP POST AND HTTP GET formats to upload data. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5102 serial server is a protocol converter between RS232/485 and TCP/IP developed by Shanghai ZLAN Information Technology Co., Ltd. The serial server can easily connect the serial port device to Ethernet and the Internet, and realize the network upgrade of the serial port device. ZLAN5102 is a typical serial server that has been running stably for 7 years since it was launched in 2011. Its distinctive feature is stable performance and high cost performance. RS485 has embedded 485 ESD protection, RS485 and RS232 can be used at the same time without switching. It supports DHCP and DNS, which can easily realize remote device monitoring in different places. Support virtual serial port, the original serial port PC software does not need to be modified. Supports high baud rate of 460800bps.PeculiaritySupports full-duplex, high-speed data forwarding without packet loss. ZLAN5102 supports users to send large batches of data at the same time on the serial port and network port without pause and data loss. TCP server, TCP client, UDP mode, and UDP multicast are supported. The baud rate supports 1200~460800bps, the data bit supports 5~9 bits, and the check bit can be None, odd check, even check, Mark, Space five ways, and supports CTS/RTS hardware flow control and software flow control. It is equipped with Windows virtual serial port & device management tool ZLVircom for free, which supports virtual serial port, and can search for ZLAN5102 and modify parameters with one click. Provides a device management library (Windows DLL dynamic link library) to facilitate users to develop applications with VC, VB, Delphi, and C++Builder. The innovative network disconnection detection mechanism can automatically re-establish the connection after the network is disconnected, regardless of whether the ZLAN5102 is working in TCP Server mode or TCP Client mode, ensuring real-time data accessibility. Built-in web server, module parameters can be modified through the browser. DHCP is supported to solve IP management and IP conflict problems. DNS is supported to meet the requirements for communication through domain names. As a TCP server, it supports up to 10 TCP connections to communicate with the networking module at the same time. If you want to connect to multiple destination IP addresses as a TCP client, select the ZLAN5102-MDIP model. The UDP mode supports the dynamic destination address mode, which is convenient for multiple users to manage the same networking module at the same time. Real COM Driver supports multi-machine communication via bit 9 (address frame is 1 and data frame is 0). Supports remote search for ZLAN5102 and configuration ZLAN5102 parameters over the Internet. 2KV network port surge protection. It supports the function of sending MAC addresses on the connection, which is convenient for the cloud to identify the device ID. The power supply can be either plug-in or terminal (specify when ordering). High strength anti-electromagnetic interference, the housing adopts radiation-resistant SECC board. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5144J is the MQTT+JSON to Modbus gateway launched by Shanghai ZLAN. It supports connecting to the cloud server in the form of MQTT, and supports interface phone configuration, independently collects the data of Modbus meter/645 meter, and converts it into JSON format and sends it to the cloud server. Supports about 100 collection data points. At the same time, it has a serial server and a Modbus gateway that can be used as a normal transparent transmission. Supports 1 Ethernet interface. RS232/485/422 serial port. The high-quality power supply design with a wide voltage of 9~24V provides better adaptability to the industrial environment, and the rail mounting accessories that can be equipped are suitable for rail installation. It integrates the Modbus TCP gateway function, which can easily realize the conversion of Modbus RTU protocol to Modbus TCP protocol. RS232 interface supports full-duplex, uninterrupted communication, RS485 embedded 485 lightning protection. For users who use virtual serial port, ZLANZ ZLVircom software can be used to realize virtual serial port, and the original serial port PC software does not need to be modified. It is also possible to use the Modbus TCP protocol in the configuration software to directly connect to the RTU device for network communication. ZLAN5144J can be applied to: PLC remote wireless monitoring; Power electronics, smart meters; Banking/medical automation systems; Securities trading systems; Industrial automation systems; A typical application connection is shown in the diagram. The original serial port device and ZLAN5144 connection convert the data of the instrument into JSON format and transmit it to the cloud through independent collection. Peculiarity Generic software featuresWide voltage power supply: 9~24V power supply range. Power input mode optional: you can choose the power supply mode of industrial terminal block or the plug mode of ordinary power adapter. Support RS232/RS485/RS422 three serial port forms. Hardware fluidics CTS/RTS and software fluidics XON/XOFF are supported. Sticky packet optimization, serial port framing real-time performance. Support the upgrade process in the system through the network port. There are four types of LINK indicator interfaces: LINK blue indicates that the TCP connection is established, and LINK green indicates that the Ethernet network cable is connected. Abundant indicators can visually display the status of the device. One-click search for configurations. Network port search: Use ZLAN's ZLVircom tool to find the module immediately and configure the network and serial port parameters. DNS resolution is supported, and it can be used as a DHCP client or as a DHCP server when it is used as an AP. TCPServer, TCP Client, UDP, and UDP multicast are supported. As a server, it supports up to 100 TCP connections to communicate with the networking module at the same time, and can connect to 8 destination IPs when it is a client. It supports sending MAC addresses on device connections, which is convenient for cloud management. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, and also supports Modbus gateway in non-storage mode. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5212DI is a serial server/IoT gateway with RS485 opto-decoupling isolation specially designed for industrial environments, which can effectively isolate the impact of interference on the RS485 bus on the working of the device and ensure the stability of the device. It is suitable for use in environments where RS485 bus interference is present. 9~24V wide voltage, terminal type power connection, with shell grounding wire. The 5212DI has two RS485 ports and one Ethernet port. It comes with hanging ears and rail buckles, supports 3 installation methods, is compact and easy to install. The 2-way serial port (PORT) of the 5212DI can use the same IP address, and different serial ports can be distinguished by the port, or each serial port can use a different IP address. This design increases flexibility and manageability, both by conserving IP resources through shared addresses and by enabling independent network communication through different IP addresses. ZLAN5212DI supports 2-bit stop bits, supports less than 8-bit data bits (e.g., 7-bit data has 1 stop bit), and supports up to 921.6Kbps baud rate. ZLAN5212DI can realize the conversion of 2 channels TCP/IP protocol to RS485, and the 2 channels work at the same time and can be configured for different baud rates. The data collection of 485 devices can be realized through the network, and the network terminal can use the virtual serial port to connect the serial port software or the software of direct TCP/IP communication. ZLAN5212DI supports transparent transmission and Modbus RTU to Modbus TCP functions, has the characteristics of a storage Modbus gateway, and also supports the MQTT protocol. It supports MODBUS RTU and 645 protocol to JSON and sends it regularly through MQTT/HTTP POST. ZLAN5212DI can be applied to: Power electronics, smart meters and energy monitoring; As an IoT gateway, it acts as a communication bridge between devices and the cloud; Remote monitoring and program download of various types of automated PLCs; All kinds of configuration software and equipment communication interfaces; Access control and security equipment networking; networked information collection of medical equipment; A typical application connection is shown in Figure 2. The original serial port device RS485 is connected to the RS485 port of the ZLAN5212DI, and the 5212DI is connected to the computer through the network cable. The software on the computer establishes a connection with the 5212DI through TCP/IP, virtual serial port, or cloud server. Thereafter, any data sent by the serial device is transparently transmitted to the computer's software, and the data sent by the software to the ZLAN5212DI over the network is transparently transmitted to the serial device. Peculiarity Hardware features:There are three ways to choose from rail mounting, backplate mounting ear mounting, and desktop mounting ear fixing. It is especially suitable for industrial guide rail installation, which can save installation space due to the narrow transverse width, and is more convenient for installation and disassembly. Industrial-grade power supply mode: terminal block wiring mode, convenient for industrial use. It can be supplied with a wide voltage of 9~24V. With enclosure grounding wire, effective diversion of disturbances and surges. RS485 serial port optocoupler isolation, isolation voltage 1500V. It is suitable for strong interference environments where ordinary serial port servers cannot work normally. Effectively isolate the ground circuit between the serial device and the serial server. Abundant panel indicators for easy debugging: in terms of connection, there are not only NET lights that indicate whether the network cable is connected well, but also LINK lights that indicate the establishment of TCP connections, and independent indicators of "serial port to network port" and "network port to serial port" in terms of data indicators. Convenient for on-site commissioning.Software features:The 2-way serial port can be configured for different baud rates, working independently and without interfering with each other. Support IP "doppelganger" technology: 2 serial ports can be distinguished by port or IP. Port differentiation: two IPs can be merged into one IP, different ports are suitable for networks lacking IPs, and IP differentiation: one IP becomes two IPs with the same port, which is suitable for applications with a fixed port number (for example, port 502 of Modbus TCP needs to be fixed). TCP server, TCP client, UDP mode, and UDP multicast are supported. When acting as a TCP client, it also supports TCP server-side functions. Supports up to 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. Support virtual serial port, equipped with Windows virtual serial port & device management tool ZLVircom. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addressesAdvanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, Modbus gateway in non-storage mode, and Modbus gateway function of ZLMB configurable table. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. It is also possible to implement multi-host applications from one serial port to multiple serial ports. The MQTT gateway function is supported. It supports Modbus RTU, Modbus TCP and 645 meter to JSON protocols, and supports HTTP POST AND HTTP GET formats to upload data. Support NTP protocol to obtain network time, which is used for serial port output, and the latter is used for protocol content uploading. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5207M is an RS485 device data collector/IoT gateway specially designed for industrial environments, with multiple functions such as serial port server, Modbus gateway, MQTT gateway, RS485 to JSON and so on. It has 2 RS485 interfaces and one Ethernet interface. It adopts the guide rail type installation method, which is easy to install. Compared with traditional desktop 2 serial servers, the width is reduced to about 1/4 of the original, and the size is small. Terminal type power supply is used, and the voltage input is 9~24V. The ZLAN5207M adopts a high-temperature flame-retardant alloy plastic shell, which has high-temperature resistance characteristics compared with ordinary plastic shells, and does not deform in the measured environment of 110°C. ZLAN5207M has industrial-grade high and low temperature operating temperature range, and has passed EMC tests such as electrostatic, group pulse, and surge. The work is stable and reliable. When used as an ordinary serial port server, connect the network port of 5207M to the Ethernet, and the host computer software can use TCP/UDP transparent transmission mode or virtual serial port mode to send data to the RS485 interface of 5207M, and the data received on the RS485 interface will also be transmitted to the software on the TCP side. In the virtual serial port mode, the serial port software connected to the virtual serial port does not need to be modified, and only the virtual serial port of ZLVircom needs to be opened. When used as a Modbus gateway, the 5207M supports Modbus TCP to Modbus RTU, so that the host computer can use the Modbus TCP protocol to collect data from RS485 Modbus RTU devices. Conversely, if the RS485 side is used as a master, it can also be used. The 5207M supports more advanced Modbus gateway functions, including configurable Modus gateway ZLMB and storage Modbus gateway, which fully meets the various configurations and usage of Modbus gateways. Its multi-master capability allows multiple computer masters to access an RS485 slave at the same time. When used as an MQTT gateway, the device can upload serial port data to the MQTT server using the MQTT protocol in transparent transmission mode, and the supported servers include Baidu Cloud MQTT, Alibaba Cloud MQTT, and China Mobile OneNet platform. The collected Modbus RTU or non-standard serial port data can be parsed into JSON format and encapsulated in MQTT packets for upload. The collected data can be uploaded in JSON format and automatically collected. The collected data supports Modbus RTU, 645 instrument 97 version, 645 instrument 07 version, various non-standard RS485 protocols, Modbus TCP, etc. Users can use ZLVircom to configure the uploaded data format and JSON keywords. MQTT protocol, HTTP POST protocol, HTTP GET protocol, transparent transmission protocol, and various non-standard network protocols can be supported during upload. ZLAN5207M has a reset button to reset parameters in case of JSON formatting. It supports edge computing functions, including: data overrun alarm, data translation and zoom, data change upload, device offline alarm, device independent collection, device automatic connection and other functions. This feature is usually used in conjunction with the JSON feature. In addition ZLAN5207MN model supports P2P networking, no need to relay through the server, and connect the device through ID. ZLAN5207M has all kinds of functions of powerful IoT gateways, which is very suitable for the collection of various RS485 meters and sensors in the industrial field, including the collection of local networks or the independent collection and transmission of uploads to cloud servers. ZLAN5207M can be applied to:As an IoT gateway, as a communication bridge between devices and the cloud; Electricity, smart meters and energy consumption monitoring; Remote monitoring and program download of various types of automated PLC; All kinds of configuration software and equipment communication interface; Access control and security in the field of equipment networking;A typical application connection is shown in Figure 2. The original serial port device RS485 is connected to the RS485 port of the ZLAN5207M, and the 5207M is connected to the computer through the network cable. The software on the computer establishes a connection with the 5207M through TCP/IP, virtual serial port, or cloud server. Thereafter, any data sent by the serial device will be transparently transmitted to the computer's software, and the data sent by the software to the ZLAN5207M over the network will also be transparently transmitted to the serial device. Peculiarity Hardware features:1. Rail design: suitable for internal installation of cabinets in industrial fields. 2. Small size: Compared with ordinary serial servers, the width is small and does not take up space. 3. With reset button: easy to reset parameters, recovery when JSON format is wrong. 4. Terminal power supply, 9~24V wide voltage input, with reverse power supply protection. Built-in resettable fuse and pressure-sensitive protection against surges. 5. Terminal RS485 interface, support 32 slave devices, baud rate support 300~921.6kbps. 6. Abundant panel indicators for easy debugging: in terms of connection, there is a LINK light that indicates the establishment of TCP connection, and there is a data activity indicator in terms of data indicator.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. When acting as a TCP client, it also supports TCP server-side functions. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 300~921.6bps, and the custom baud rate is supported. The data bit supports 5~9 bits, and the check bit can be no check, odd check, even check, mark, and space. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, Modbus gateway in non-storage mode, and Modbus gateway function of ZLMB configurable table. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. It is also possible to implement multi-host applications from one serial port to multiple serial ports. The MQTT gateway function is supported. It supports JSON to Modbus RTU, Modbus TCP and 645 meter protocols, and supports HTTP POST AND HTTP GET formats to upload data. Support NTP protocol to obtain network time, which is used for serial port output, and the latter is used for protocol content uploading. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | SummaryZLAN5200 serial device server is a 2 ports protocol converter between RS232/485/422 and TCP/IP developed by Shanghai ZLAN. ZLAN5200 support 2 RS232 ports, 2 RS422/485 ports, can realize 2 serial ports simultaneous full-duplex working through connecting to ZLAN5200 via a cable. The RS485 interface is green terminal interface, the RS232/RS485 are RJ45 Ethernet port connection interface. ZLAN can equip RJ45 to DB9 cable, 2 such line connecting to 2 RJ45 RS232 interface can lead out 2 DB9 male RS232 splice. Also 5200 provide an extra Ethernet interface, can be used as switch or cascade. ZLAN5200 support extending to 4/6/8 ports through cascade Ethernet port. 5200 provide 2 power connecting methods of power plug and terminal, wide range voltage, as well provide shell grounding protection. FeatureSupport full duplex, high speed converting, and no packet lost. Hight cost performance. Support TCP Server, TCP Client, UDP mode, and if communicating with ZLVirCom (our software), it automatically change to Real Com Driver Mode. Support band rate 1200~460800bps, data size 5~9bits, parity of None, Odd, Even, Mark, Space. Support CTS/RTS hardware flow control. Embedded with 485 lightning protection function. Equipped freely with our Windows Virtual Serial & Device Management Tool ZLVirCom. It supports virtual serial and searching device or modifying parameters with ZLVircom. Provide device management library (Window DLL library). It will help user to develop program with VC, VB, Delphi, C++ Builder. User need only use read() or write() function to communicate with ZLAN5200. The innovative disconnecting detecting method. Whether it running in TCP Server mode or TCP Client mode, once network is disconnected by some reason, the disconnecting detecting method will detected it and reestablished the connecting. Suitable for Modbus RTU networking upgrading. It is compatible with the software of SCADA/HMI software of Beijing Sunway ForceControl Technology Co. Ltd; Also it support directly transform Modbus TCP to Modbus RTU. With build-in Web server, its parameters can be modified by web browser. Support DHCP, easy for IP management and solve IP confliction. Support DNS. It fulfills the need of access data server through domain name. Support up to 100 TCP connections communicate with network modules at the same time. Flexible serial data framing setting. It fulfills all kinds of serial data frame requirement. UDP mode support dynamic destination address mode. It helps for multi-user mange one serial server. Real Com Driver mode support using the 9-th bit to facilitate communication with milt-device. (the 9-th bit being 0 means data frame and 1 means address frame). Support searching serial servers and modifying parameters through Internet remotely. Support parameter modifying protection, preventing modifying by accident. Support running with default parameters. Build-in 2 KV electrical plus protection in RJ45. High protection of electromagnetic interference, with its high electromagnetic interference protection SECC external shell. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5407M is an RS485 device data collector/IoT gateway specially designed for industrial environments, which has multiple functions such as serial server, Modbus gateway, MQTT gateway, RS485 to JSON and so on. It has 4 RS485 interfaces and one Ethernet interface. It adopts the guide rail type installation method, which is easy to install. Compared with the traditional desktop 4 serial server, the width is reduced to about 1/4 of the original, and the size is small. Terminal type power supply is used, and the voltage input is 9~24V. The ZLAN5407M adopts a high-temperature flame-retardant alloy plastic shell, which has high-temperature resistance characteristics compared with ordinary plastic shells, and does not deform in the measured environment of 110°C. ZLAN5407M has industrial-grade high and low temperature operating temperature range, and has passed EMC tests such as electrostatic, swarm pulse, and surge. The work is stable and reliable. When used as an ordinary serial port server, connect the network port of 5407M to the Ethernet, and the host computer software can use TCP/UDP transparent transmission mode or virtual serial port mode to send data to the RS485 interface of 5407M, and the data received on the RS485 interface will also be transmitted to the software on the TCP side. In the virtual serial port mode, the serial port software connected to the virtual serial port does not need to be modified, and only the virtual serial port of ZLVircom needs to be opened. When used as a Modbus gateway, the 5407M supports Modbus TCP to Modbus RTU, so that the host computer can use the Modbus TCP protocol to collect data from RS485 Modbus RTU devices. Conversely, if the RS485 side is used as a master, it can also be used. The 5407M supports advanced Modbus gateway functions, including configurable Modus gateway ZLMB and storage Modbus gateway, which fully meets the various configurations and usage of Modbus gateways. Its multi-master capability allows multiple computer masters to access an RS485 slave at the same time. When used as an MQTT gateway, the device can upload serial port data to the MQTT server using the MQTT protocol in transparent transmission mode, and the supported servers include Baidu Cloud MQTT, Alibaba Cloud MQTT, and China Mobile OneNet platform. The collected Modbus RTU or non-standard serial port data can be parsed into JSON format and encapsulated in MQTT packets for upload. The collected data can be uploaded in JSON format and automatically collected. The collected data supports Modbus RTU, 645 instrument 97 version, 645 instrument 07 version, various non-standard RS485 protocols, Modbus TCP, etc. Users can use ZLVircom to configure the uploaded data format and JSON keywords. MQTT protocol, HTTP POST protocol, HTTP GET protocol, transparent transmission protocol, and various non-standard network protocols can be supported during upload. ZLAN5407M has a reset button to reset parameters in case of JSON formatting. It supports edge computing functions, including: data overrun alarm, data translation and zoom, data change upload, device offline alarm, device independent collection, device automatic connection and other functions. This feature is usually used in conjunction with the JSON feature. In addition ZLAN5407MN model supports P2P networking, no need to relay through the server, and connect the device through ID. ZLAN5407M has all kinds of functions of powerful IoT gateway, which is very suitable for the collection of various RS485 meters and sensors in the industrial field, including the collection of local networks or the independent collection and transmission of uploads to cloud servers. ZLAN5407M can be applied to: As an IoT gateway, as a communication bridge between devices and the cloud; Electricity, smart meters and energy consumption monitoring; Remote monitoring and program download of various types of automated PLC; All kinds of configuration software and equipment communication interface; Access control and security in the field of equipment networking; A typical application connection is shown in Figure 2. The original serial port device RS485 is connected to the RS485 port of the ZLAN5407M, and the 5407M is connected to the computer through the network cable. The software on the computer establishes a connection with the 5407M through TCP/IP, virtual serial port or cloud server. Thereafter, any data sent by the serial device will be transparently transmitted to the computer's software, and the data sent by the software to the ZLAN5407M through the network will also be transparently transmitted to the serial device. Peculiarity Hardware features:1. Rail design: suitable for internal installation of cabinets in industrial fields. 2. Small size: Compared with ordinary serial servers, the width is small and does not take up space. 3. With reset button: easy to reset parameters, recovery when JSON format is wrong. 4. Terminal power supply, 9~24V wide voltage input, with reverse power supply protection. Built-in resettable fuse and pressure-sensitive protection against surges. 5. Terminal RS485 interface, support 32 slave devices, baud rate support 300~921.6kbps. 6. Abundant panel indicators for easy debugging: in terms of connection, there is a LINK light that indicates the establishment of TCP connection, and there is a data activity indicator in terms of data indicator.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. When acting as a TCP client, it also supports TCP server-side functions. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 300~921.6bps, and the custom baud rate is supported. The data bit supports 5~9 bits, and the check bit can be no check, odd check, even check, mark, and space. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, Modbus gateway in non-storage mode, and Modbus gateway function of ZLMB configurable table. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. It is also possible to implement multi-host applications from one serial port to multiple serial ports. The MQTT gateway function is supported. It supports JSON to Modbus RTU, Modbus TCP and 645 meter protocols, and supports HTTP POST AND HTTP GET formats to upload data. Support NTP protocol to obtain network time, which is used for serial port output, and the latter is used for protocol content uploading. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | MoweStar | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5443A is a new generation of 4 serial server developed by Shanghai ZLAN Information Technology Co., Ltd. It can realize 4 serial port data to TCP/IP, and supports two 10M/100M Ethernet ports. ZLAN5443A Modbus gateway function that converts Modbus TCP to Modbus RTU. The Modbus gateway supports simultaneous data reading on multiple Modbus client connections, i.e., the "multi-master" function. ZLAN5443A supports 4 RS232 serial ports and 4 RS422/485 serial ports. The user connects the ZLAN5443A to the network through a network cable, and the host computer can access four serial ports at the same time through the virtual serial port or TCP protocol. ZLAN5443A supports expansion to 8 serial ports, 12 serial ports, 16 serial ports, and up to 32 serial ports through the level networking port. Peculiarity Hardware features:All 4 serial ports support RS232, RS485, RS422 three serial ports. The 4 serial ports can work independently and fully duplex, without interfering with each other, and can be configured for different baud rates. It supports the network switch function of 2 network ports and can be used as a switch at the same time. Abundant indicators, each serial port has independent TCP connection indicators and data activity indicators.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. Supports 10 TCP connections as a TCP server. The baud rate supports 1200~460800bps, the data bit supports 5~9 bits, the check bit can be no check, odd check, even check, mark, space five ways, support CTS/RTS hardware flow control and XON/XOFF soft flow control. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. DHCP dynamically obtains the domain name server address of the IP and DNS protocol connections. It supports remote search for devices and configuration of device parameters in the cloud. You can remotely view the TCP connection status of a device through the software. The virtual serial port supports data monitoring function. It supports Modbus gateway function and Modbus RTU to Modbus TCP. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5443D is a rail-mounted, RS485 4-serial serial server/Modbus gateway with opto-decoupling isolation, which can effectively isolate the impact of interference on the RS485 bus on the operation of the device and ensure the stability of the device. It is suitable for use in environments where RS485 bus interference is present. Built-in power lightning protection, 9~24V wide voltage, terminal type power access, with shell grounding wire. ZLAN5443D is designed with a rail type with a rail buckle on the back, and also has two mounting ears on it, which can be mounted horizontally or vertically, which are suitable for mounting on the back plate or desktop. ZLAN5443D can realize the conversion of 4 channels TCP/IP protocol to RS485, 4 channels work at the same time and can be configured for different baud rates. The data collection of 485 devices can be realized through the network, and the network terminal can use the virtual serial port to connect the serial port software or the software of direct TCP/IP communication. It comes with two 10M/100M network ports, which can be connected to any network port. The other network port can realize the cascade of multiple ZLAN5443D through the network cable, which can be cascaded into 8 serial ports, 12 serial ports, and 16 serial ports. ZLAN5443D supports the Modbus RTU to Modbus TCP conversion function, and has the characteristics of a storage-based Modbus gateway. Of course, it can also be used as a non-storage Modbus gateway. ZLAN5443D can be applied to:power electronics, smart meters and energy consumption monitoring;As an IoT gateway, a communication bridge between devices and the cloud;Remote monitoring and program download of various types of automation PLC;All kinds of configuration software and equipment communication interfaces;Access control and security in the field of equipment networking;networked information collection of medical equipment; A typical application connection is shown in the diagram. The original serial port device and the serial port connection of the ZLAN5443D, the 5443D is connected to the computer through a network cable. The software on the computer establishes a connection with the 5443D through TCP/IP or virtual serial port. Thereafter, any data sent by the serial device will be transparently transmitted to the computer's software, and the data sent by the software to the ZLAN5443D through the network will also be transparently transmitted to the serial device. Peculiarity Hardware features:There are three ways to choose from rail mounting, backplate mounting ear mounting, and desktop mounting ear fixing. It is especially suitable for industrial guide rail installation, which can save installation space due to the narrow transverse width, and is more convenient for installation and disassembly. RS485 serial port optocoupler isolation, isolation voltage 1500V. It is suitable for strong interference environments where ordinary serial port servers cannot work normally. Effectively isolate the ground circuit between the serial device and the serial server. Built-in power lightning protection: Built-in varistor and ceramic discharge tube can effectively protect the internal circuit of the serial server in the case of power surge. Industrial-grade power supply mode: terminal block wiring mode, convenient for industrial use. It can be supplied with a wide voltage of 9~24V. With enclosure grounding wire, effective diversion of disturbances and surges. Dual-network port design, support the cascade of serial servers, expand to 8 serial ports, 12 serial ports, 16 serial ports, etc. Abundant panel indicators for easy debugging: in terms of connection, there are not only 100M_LINK lights that indicate whether the network cable is connected well, but also LINK lights that indicate the establishment of TCP connections, and independent indicators of "serial port to network port" and "network port to serial port" in terms of data indicators. Convenient for on-site commissioning.Software features:The 4-way serial port can be configured for different baud rates, working independently and without interfering with each other. TCP server, TCP client, UDP mode, and UDP multicast are supported. When you are a TCP client, you can also support the TCP server-side function. It supports 30 TCP connections as a TCP server and 7 destination IPs as a TCP client. The baud rate supports 1200~115200bps, the data bit supports 5~9 bits, and the check bit can be no check, odd check, even check, mark, and space. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. It supports web browser configuration and DHCP to dynamically obtain IP and DNS protocol connection domain name server addresses. It supports remote search for devices, configuration of device parameters, and upgrade of device programs in the cloud. It supports remote viewing of the TCP connection status of the device, serial port data sending and receiving status through the software. The virtual serial port supports data monitoring function.Advanced software featuresIt supports Modbus gateway function and Modbus RTU to Modbus TCP. It can support storage-based Modbus, which can automatically collect and store device data, and also supports Modbus gateway in non-storage mode. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. Support custom heartbeat package and registration package function: it can easily communicate with the cloud and identify devices. TCP connection requires password verification to ensure connection security. It supports the data submission and delivery function of http, and the cloud can directly use the http GET command to interact with the serial port data of the device. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5443H is a new generation of 4 serial server developed by Shanghai ZLAN Information Technology Co., Ltd. It can realize 4 serial port data to TCP/IP, and supports two 10M/100M Ethernet ports. ZLAN5443H supports the Modbus gateway function of Modbus TCP to Modbus RTU. The Modbus gateway supports simultaneous data reading on multiple Modbus client connections, i.e., the "multi-master" function. ZLAN5443H supports 4 RS232 serial ports and 4 RS422/485 serial ports. The user connects the ZLAN5443H to the network through a network cable, and the host computer can access four serial ports at the same time through the virtual serial port or TCP protocol. ZLAN5443H supports the expansion of 8 serial ports, 12 serial ports, 16 serial ports, and up to 32 serial ports through the level networking port.Peculiarity Hardware features:All 4 serial ports support RS232, RS485, RS422 three serial ports. The 4 serial ports can work independently and fully duplex, without interfering with each other, and can be configured for different baud rates. It supports the network switch function of 2 network ports and can be used as a switch at the same time. Abundant indicators, each serial port has independent TCP connection indicators and data activity indicators.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. Supports 10 TCP connections as a TCP server. The baud rate supports 1200~460800bps, the data bit supports 5~9 bits, the check bit can be no check, odd check, even check, mark, space five ways, support CTS/RTS hardware flow control and XON/XOFF soft flow control. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. DHCP dynamically obtains the domain name server address of the IP and DNS protocol connections. It supports remote search for devices and configuration of device parameters in the cloud. You can remotely view the TCP connection status of a device through the software. The virtual serial port supports data monitoring function. It supports Modbus gateway function and Modbus RTU to Modbus TCP. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5843A is a new generation of 8 serial port server developed by Shanghai ZLAN Information Technology Co., Ltd., compared with the ZLAN5800A, because the ZLAN5843A adopts the third generation of hardware technology, it is more cost-effective, and ZLAN5843A supports the Modbus gateway function of Modbus TCP to Modbus RTU. The Modbus gateway supports simultaneous data reading on multiple Modbus client connections, i.e., the "multi-master" function. ZLAN5843A serial server is an 8-port protocol converter between RS232/485 and TCP/IP developed by Shanghai ZLAN Information Technology Co., Ltd. ZLAN5843A supports 8 RS232 serial ports, 8 RS485 serial ports (RS485 is not supported by default, if RS485 is required, the model is ZLAN5843A-485), connected to the ZLAN5843A through a network cable, 8 serial ports can be fully duplexed at the same time, and the function of each serial port is the same as that of ZLAN2100/3100, which is an ideal choice for multi-serial port networking. ZLAN5843A supports expansion to 16 serial ports, 24 serial ports, 32 serial ports, and up to 64 serial ports through the level networking port.Peculiarity Hardware features:All 8 serial ports support RS232, RS485, two kinds of serial ports. The 8 serial ports can work independently and fully duplex, without interfering with each other, and can be configured for different baud rates. It supports the network switch function of 2 network ports and can be used as a switch at the same time. Abundant indicators, each serial port has independent TCP connection indicators and data activity indicators.Software features:TCP server, TCP client, UDP mode, and UDP multicast are supported. Supports 10 TCP connections as a TCP server. The baud rate supports 1200~460800bps, the data bit supports 5~9 bits, the check bit can be no check, odd check, even check, mark, space five ways, support CTS/RTS hardware flow control and XON/XOFF soft flow control. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. DHCP dynamically obtains the domain name server address of the IP and DNS protocol connections. It supports remote search for devices and configuration of device parameters in the cloud. You can remotely view the TCP connection status of a device through the software. The virtual serial port supports data monitoring function. It supports Modbus gateway function and Modbus RTU to Modbus TCP. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | OverviewZLAN5840I is a new generation of RS485 isolated 8 serial server/Modbus gateway developed by Shanghai ZLAN Information Technology Co., Ltd., which can effectively isolate the impact of interference on the RS485 bus on the working of the equipment and ensure the stability of the equipment. It is suitable for use in the environment where RS485 bus interference is used. Built-in power surge protection. ZLAN5840I can convert 8-channel serial port data to TCP/IP. Compared with ZLAN5800A, ZLAN5840I supports the Modbus gateway function of Modbus TCP to Modbus RTU. The Modbus gateway supports simultaneous data reading on multiple Modbus client connections, i.e., the "multi-master" function. ZLAN5840I supports 8 RS485 serial ports, and the RS485 interface is a terminal interface. It supports two 10M/100M Ethernet ports, the user connects the device to the network through a network cable, and the host computer can access 8 serial ports at the same time through the virtual serial port or TCP protocol. ZLAN5840I supports the expansion of 16 serial ports, 24 serial ports, 32 serial ports, and up to 64 serial ports through the level networking port.ZLAN5840I can be applied to: Power electronics, smart meters and energy monitoring; As an IoT gateway, it acts as a communication bridge between devices and the cloud; Remote monitoring and program download of various types of automated PLCs; All kinds of configuration software and equipment communication interfaces; Access control and security equipment networking; Networked information collection of medical equipment;Peculiarity8 serial ports support opto-isolated RS485 serial ports. The 8 serial ports can work independently, do not interfere with each other, and can be configured for different baud rates. It supports the network switch function of 2 network ports and can be used as a switch at the same time. Abundant indicators, each serial port has independent TCP connection indicators and data activity indicators. TCP server, TCP client, UDP mode, and UDP multicast are supported. Supports 10 TCP connections as a TCP server. It supports sending MAC addresses on device connections, which is convenient for cloud management. Provide a secondary development package DLL development library for searching and configuring devices on the computer side. DHCP dynamically obtains the domain name server address of the IP and DNS protocol connections. It supports remote search for devices and configuration of device parameters in the cloud. It supports Modbus gateway function and Modbus RTU to Modbus TCP. Support multi-host function: In the one-question-and-answer query mode, the network port allows multiple computers to access the same serial port device at the same time. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| | SummaryZLAN5G00A Serial Device Server is a rack-mounted 16-port protocol converter between RS232/4485/422 and TCP/IP developed by Shanghai ZLAN. ZLAN5G00A support 16 channels RS232 serial port, 16 channels RS485 serial port, 16 channels RS422 serial port, and RS232 support flow control. The 16 channels can achieve to full-duplex work at the same time after connecting to ZLAN5G00A via a network cable, and the function of each serial port is same as single serial port server ZLAN2100/3100. Each channel serial port can be TCP client, UDP client, UDP-UDP multicast. ZLAN5G00A is the ideal choice for multi-serial port connecting to internet.ZLAN can provide shells in both white and black colors.1) All 16 channels support the three kind serial port RS232, RS485, RS422 (needs jumper setting), the serial port is in type of RJ45. RS232 support hardware flow control. When using RS232, can provide patch cord accessories for RJ45 to DB9 (male). 2) All 16 channels can full-duplex work independently and no-interference each other. Can be configured different baud rate. 3) Support network switch function of 4 Ethernet port, and can be used as switch meanwhile. 4) Abundant signal light, each serial port has independent indicator light for TCP connection and data activity. 5) Support power supply through cable----POE power supply (customization) 6) 220V AC power supply. 7) 19-inch standard 1U rack structure design, convenient installation. With rack installation accessories. 8) Patent products of Shanghai ZLAN with leading technology. Patent No. ZL 2014 2 0108890.3. | ZLAN | In Stock | New Sealed Under Guarantee | | |
| |
| Industrial communication station |
| | TEM2010X is an 8-port 2.5G Ethernet switch with 2*10G SFP+ ports independently designed by Tenda. The switch supports three working modes,establishing high-speed network along with computers, NAS, TV set-up boxes, WiFi6/7 APs and so on. TEM2010X is an ideal access device for high-speed network deployment in SMEs, SOHOs, villas or wireless networking scenarios. 8-Port 2.5G Ethernet Switch with 2*10G SFP+ slots, Break Bandwidth Limitations Equipped with 8*2.5G GE and 2*10G SFP+, all ports support wire-speed forwarding. Through wired transmission, data service traffic is forwarded faster and achieves ultra-low latency. Equipped With NAS Dedicated Mode, Greatly Improving Office Efficiency One-click to open the NAS dedicated mode, the transmission speed is doubled to 5G, and the efficiency is improved. Turn on WIFI7 AP real network speed, Unlimited performance It has 8*2.5G RJ45 ports and 2*10G SFP+ to connect high-speed network devices. It can stimulate the maximum potential of WIFI6/WIFI7 AP. Compared with connecting with a Gigabit Ethernet switch, the performance is not limited and the experience is better. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEM2007X is an 5-port 2.5G Ethernet switch with 2*10G SFP+ Slots independently designed by Tenda. The switch establishing high-speed network along with computers, NAS, TV set-up boxes, WiFi6/7 APs and so on. TEM2007X is an ideal access device for high-speed network deployment in SMEs, SOHOs, villas or wireless networking scenarios. 5-Port 2.5G Ethernet Switch with 2*10G SFP+ slots, Break Bandwidth Limitations Equipped with 5*2.5G GE and 2*10G SFP+, all ports support wire-speed forwarding. Through wired transmission, data service traffic is forwarded faster and achieves ultra-low latency. Turn on WIFI7 AP real network speed, Unlimited performance It has 5*2.5G RJ45 ports and 2*10G SFP+ to connect high-speed network devices. It can stimulate the maximum potential of WIFI6/WIFI7 AP. Compared with connecting with a Gigabit Ethernet switch, the performance is not limited and the experience is better. High Compatibility, Adaptable to Various Networked Devices 10G SFP+ ports supports compatibility with 1G and 2.5G,smooth upgrade, easily upgrade the whole house high-speed networking. Ultra-Small Body, Fit for All Kinds of Information/Weak Current Boxes Based on the design of house type and enterprise application, the body has been made smaller. It is suitable for all kinds of information and weak current boxes. 6KV Professional Lightning Protection Design, Earless of Thunderstorm Weather The switch supports 6 kV lightning protection for ports , reducing the risk of inductive lightning and ensuring stable operation even under thunderstorms. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEM2010F is an 8-port 2.5G Ethernet switch with 2 SFP ports independently designed by Tenda. The switch supports three-mode toggle and offers eight 2.5 Gbps RJ-45 ports and two 2.5 Gbps SFP ports, establishing high-speed network along with computers, NAS, TV set-up boxes, Wi-Fi6 APs and so on.TEM2010F is an ideal access device for high-speed network deployment in SMEs, SOHOs, villas or wireless networking scenarios. 2.5G High-speed Bandwidth,Extremely Fast Experience Equipped with 8*2.5G GE and 2*2.5G SFP, all ports support wire-speed forwarding. Through wired transmission, data service traffic is forwarded faster and achieves ultra-low latency. Turn on WIFI6 AP real network speed,Unlimited performance It has 10*2.5G ports to connect high-speed network devices. It can stimulate the maximum potential of WIFI6AP. Compared with connecting with a Gigabit Ethernet switch, the performance is not limited and the experience is better. Easily Realize High-speed Networking Smooth upgrade, easily upgrade the whole house high-speed networking. Equipped With NAS Dedicated Mode, Greatly Improving Office Efficiency One-click to open the NAS dedicated mode, the transmission speed is doubled to 5G, and the efficiency is improved. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG5328F is a Tenda Layer-3 managed switch. To meet the demand of high-performance access, the switch provides 24 10/100/1000 Mbps Base-T Ethernet ports and 4 separate 1000 Mbps Base-X SFP ports. With an innovative hardware structure and software platform, it features a powerful processing capacity and complete security protection mechanism, making management and maintenance easy and simple, fully meeting the demands of high-density user access and high-performance aggregation, ideal for the aggregation layer or core layer of such medium to large networks as enterprises and campuses. Layer-3 Routing Engine，High-Efficiency Fast Forwarding Supports Layer 3 www routing protocols, supports Layer 3 forwarding of up to 400+ terminals, easily meets Layer 3 routing andforwarding across network segments, and truly achieves Layer 2 network isolation and Layer 3 network interworking. Comparedwith using a Layer 2 switch for transmission, there is no need to go through a router, and the forwarding speed is faster! Flexible QoS, Precise Traffic Control The TEG5328F supports three QoS scheduling modes (SP, SWRR, WRR) for more accurate traffic control. After the QoS function is enabled, the traffic in the network will be precisely controlled according to the priority of the label. It will prioritize important traffic and reduce the proportion of data flows that occupy a large amount of insignificant traffic in the condition of limited bandwidth，in order to better meet the current transmission needs. Supports Layer 2 And Layer 3 ACL，For More Secure Access Support strict access control based on MAC address or IP address, which can filter the corresponding data packets to enhance user network security. It can be used for network deployment of enterprise, medical and other units. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG3328F is an layer-2 managed switch designed by Tenda. Equipped with a developed hardware structure and software platform, this switch features a powerful processing capacity, a complete security protection mechanism, and various means for maintenance and management. With these advantages, it fully meets the demands of high-density connections and high-performance aggregation, ideal for the aggregation layer or core layer of such medium to large networks as enterprises and hotels. The system can generate the network topology automatically. It supports IP camera discovery based on ONVIF protocol and network device discovery based on LLDP, as well as online/offline status detection for all devices in the network, which improves the LAN operation and maintenance efficiency and also reduces the maintenance cost. DHCP Snooping: No fear of the illegal DHCP Servers connected When the switch enables the DHCP Snooping function, by setting trusted Interfaces and untrusted Interface, it can effectively prevent network problems caused by privately connected illegal DHCP Servers. Supports Layer 2 And Layer 3 ACL, For More Secure Access Support strict access control based on MAC address or IP address, which can filter the corresponding data packets to enhance user network security. It can be used for network deployment of enterprise, medical and other units. Layer-2 managed switch: 24 Gigabit (10/100/1000 MBit/s) RJ45 LAN ports and 4 Gigabit SFP ports Management functions: L2 managed switch supports intuitive web interface to manage, configure and monitor the network; supports console port/telnet configuration, SNMP, dual image, ping/tracert/cable test Advanced functions: QoS, VLAN, IGMP snooping, ACL, port security, DoS defense, DHCP snooping, 802.1X, radius authentication, static aggregation, LACP dynamic aggregation 12 MB large buffer: 12 m buffer is three times the size of other brands in the same gear Versatile mounting options: supports desktop, wall and rack mounting | Tenda | In Stock | New Sealed Under Guarantee | | |
| | Developed by Tenda, TEG1050F is a Gigabit unmanaged Ethernet switch designed for establishing wired networks of high density and high speed in such scenarios as enterprises, parks, schools, and internet cafes, providing a simple, easy, cost-effective, and rapid internet access solution for video surveillance and SMBs' networking. With 48 10/100/1000 Mbps RJ45 ports, and 2 independent Gigabit SFP slots that can be paired with Tenda's SFP modules, this switch can be used to deploy a long-distance network up to 20 km. Its full-duplex transmission rate can reach 2000 Mbps, ensuring the timely transmission of large files and smoothness of videos. Its one-key VLAN function can isolate broadcast storms. Its integrated professional lightning protection circuit offers 6 kV lightning protection for the built-in power supply and all Ethernet ports, ensuring the stability and reliability of the switch. The switch supports desktop mounting, rack mounting and wall mounting, and features a 1U 19-inch standard rack-mount shell design and plug & play function. With these advantages, it is an ideal choice for deploying a cost-effective and high-speed network.【Expand Your Network】48× 10/100/1000Mbps RJ45 Ports and 2x Gigabit SFP ports, supporting MAC address learning, auto MDI / MDIX and auto-negotiation; up to 1000 Mbps transfer rate, 10 times faster than Fast Ethernet; up to 2000 Mbps transfer rate in full duplex mode 【One-key VLAN】In this mode, ports 1 to 46 cannot communicate with each other, but can communicate with ports 47 to 50 to isolate broadcast storms and enhancing network security 【12 Mb Large Buffer】The Ethernet switch has a 12Mb large buffer, which can meet the needs of burst traffic network applications such as search engines, IPTV, P2P downloads, etc., ensuring no packet loss, timely transmission of large files, and smooth video 【Plug and play】Just plug and play to expand your network, no configuration required 【Various Mounting Options】The Ethernet splitter supports Desktop / Wall / Rack Mounting, flexible and practical, suitable for actual network engineering 【6 kV Lightning Protection】The gigabit switch features built-in 6 kV lightning protection on all Ethernet ports and supports over-temperature, over-voltage and surge current protection | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG1024D is a 24-port gigabit Ethernet switch independently designed by Tenda. The switch supports wire-speed forwarding of all ports to ensure smooth transmission of large files and video streaming. It features a compact metal body, and supports desktop, wall and rack mounting. As a flexible and simple-to-use device, it can be connected to such network devices as computers and network cameras. It is your ideal choice for video surveillance and wired networking in such scenarios as SMBs, communities, factories, and schools.【Expand Your Network】The 24-port Gigabit switch supports MAC address self-learning, auto MDI / MDIX and auto-negotiation; up to 1000 Mbps transfer rate, 10 times faster than Fast Ethernet; up to 2000 Mbps transfer rate in full duplex mode 【First Choice for Survilliance】Each port of the Gigabit Ethernet switch has an indicator light. You can judge the working status of the network by color and flashing 【Plug and Play】Just plug and play to expand your network, no configuration required. Ideal for beginners 【Versatile Mounting Options】The 24-port network switch supports desktop, wall mount or rack mount, you can put it in the right place according to your usage 【Metal Case & Fanless Design】All-metal case with holes on three sides for more efficient heat dissipation; the fanless design ensures no noise, perfect for office and home 【6 kV Lightning Protection】The 24-port switch features built-in 6 kV lightning protection on all Ethernet ports and supports over-temperature, over-voltage and over-current protection | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG1016G is a 16-port gigabit Ethernet switch independently designed by Tenda. The switch supports wire-speed forwarding of all ports to ensure smooth transmission of large files and video streaming. It features a compact metal body, and supports desktop, wall and rack mounting. As a flexible and simple-to-use device, it can be connected to such network devices as computers and network cameras. It is your ideal choice for video surveillance and wired networking in such scenarios as SMBs, communities, factories, and schools. Gigabit ports, high-speed network The 16-gigabit ports enable you to experience lower latency and faster transfer speed, ensure instant transfer of large files and stable video streams and improve network usage experience in various scenarios. High-performance Chip Achieve True Stability Equipped with high-performance chips, more efficient operation and strong data processing capabilities make the network high-speed and stable. Plug And Play, Make Networking Easier Quick and easy Internet settings, simple enough for you to set up office networking,13-inch body design, and support desktop, wall and rack mounting. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG1016D is a 16-port gigabit Ethernet switch independently designed by Tenda. The switch supports wire-speed forwarding of all ports to ensure smooth transmission of large files and video streaming. It features a compact metal body, and supports desktop, wall and rack mounting. As a flexible and simple-to-use device, it can be connected to such network devices as computers and network cameras. It is your ideal choice for video surveillance and wired networking in such scenarios as SMBs, communities, factories, and schools. Gigabit ports, high-speed network The 16-gigabit ports enable you to experience lower latency and faster transfer speed, ensure instant transfer of large files and stable video streams and improve network usage experience in various scenarios. High-performance Chip Achieve True Stability Equipped with high-performance chips, more efficient operation and strong data processing capabilities make the network high-speed and stable. Plug And Play, Make Networking Easier Quick and easy Internet settings, simple enough for you to set up office networking,13-inch body design, and support desktop, wall and rack mounting. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG1016M is a Gigabit unmanaged Ethernet switch developed by Tenda. Its full-duplex transmission rate can reach 2000 Mbps, ensuring timely transmission of large files and smoothness of videos. The switch features a mini steel shell, a fanless design, and wire-speed forwarding of all ports. It comes with a power adapter for power supply, and can connect to such network devices as computers and IP cameras. The switch also supports one-key isolation mode switching. With the advantages of plug and play functionality, easy installation and high performance, it offers a cost-effective solution for video surveillance and wired networking in such small and medium-sized scenarios as small and micro businesses, villas, and stores. All Gigabit Speed, Enjoy High-Speed Networking The switch provides 16 10/100/1000 Mbps auto-negotiation RJ45 ports. The full-duplex transmission rate of the switch can reach 2000 Mbps, and all ports feature wire speed forwarding, ensuring high performance for processing applications that require high bandwidth. Stable Transmission, Safe And Reliable, Suitable For Small & Micro Office/Home Network TEG1016M's full-duplex transmission rate can reach 2000 Mbps, ensuring timely transmission of large files and smoothness of videos. The switch also supports one-key isolation mode switching. It offers a cost-effective solution for video surveillance and wired networking in such small and medium-sized scenarios as small and micro businesses, villas, and stores. Mini Steel Shell, Wall-mount Design, Plug & Play It supports desktop mounting and wall mounting, and features plug & play functionality and an easy-to-use design. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG1008M is a high-performance 8-port full Gigabit desktop Ethernet switch designed for Tenda's high-speed cascading scenarios for small and medium-sized surveillance, small and medium-sized businesses. Designed with a mini steel shell, it does not take up space and has a strong heat dissipation. Provides 8 10/100/1000 Mbps auto-negotiation ports, which increases transmission rate by 10 times, improves large file forwarding rate, and effectively solves problems such as video jams and picture loss in high-definition surveillance environments. The TEG1008M supports desktop/wall mount installation, plug and play, no setup, easy to use, and is ideal for improving network performance. Gigabit Speed 8 gigabit ports ensure the speed of the transmission of large files and improve transmission efficiency. Support 5-12V DC Input 9-12V DC input design,support centralized power supply and monitor power supply. Wallmount & Plug-n-play support desktop and wallmount,plug-n-play,easy to use. Metal Shell , Stable Operation Full-metal & larger shell ensure effective cooling. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | Tenda TEG1005D is an unmanned layer 2 gigabit switch designed for security surveillance. It provides five 10/100/1000 Mbps auto-negotiation ports that support linespeed forwarding at up to 1000 Mbps. With a fine steel housing, it features excellent durability and heat dissipation performance. 6KV Lightning protection is offered to each port to effectively prevent severe lightning damages to the switch. So, it is a right choice for small and medium sized security surveillance projects in SMBs, parks, plants, renting rooms, and so on. Choose TEG1005D for a faster and more stable gigabit surveillance network. Improve transmission efficiency Support 15K jumbo Frame to speed up the transmission of large files and improve transmission efficiency. Extraordinary heat dissipation A housing made of 0.8 mm galvanized industrial-grade steel plates for excellent durability, heat dissipation performance, ensuring stable switch operation, a long service life, and more reliable outdoor security surveillance. Lightning protection for ports Integrated with professional a lightning protection circuit that offers 6KV lightning protection to each port to effectively prevent lightning-induced current from damaging the ports or switch, so as to ensure the surveillance system stability. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEF1109D is a 9-port fast Ethernet switch developed by Tenda, offering 9 10/100 Mbps RJ45 ports. Equipped with large packet buffer, it also ensures smooth streaming even when 8 HD IP cameras are working simultaneously. You can enable port VLAN mode of the switch to protect your LAN network from broadcast storm and prevent loss of monitoring images. In addition, the switch offers 6 kV lightning protection for its uplink port. In a word, TEF1109D is a perfect choice for small and medium-sized IP surveillance projects and enterprises to have network Excellent Lightning Protection The switch supports 6 kV lightning protection for uplink port,protecting the switch from thunderstorms and making it more stable. Enjoy Super HD Video Screen Equipped with 1024 KB large packet buffer,it ensures smooth streaming even when eight HD IP cameras of 500W are working simultaneously. Transmission Distance up to 250m With the extension technology,data can be transmitted through 250 meters cable which would be a cost-effective replacement for extenders and optical fibers. Easy Port VLAN Setup With VLAN Mode on , ports 1 to 8 are isolated from each other, enabling the switch to isolate broadcast storm, improving LAN security and data transmission. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | Tenda TEF1005D is an unmanaged layer 2 fast switch designed for security surveillance. It provides five 10/100 Mbps auto-negotiation ports that support line-speed forwarding at up to 100 Mbps, ensuring smooth security surveillance video playback. With a fine steel housing, it features excellent durability and heat dissipation performance, ensuring network stability and a long service life. So, it is a right choice for small and medium sized security surveillance projects in SMBs, parks, plants, renting rooms, and so on. Stay connected for 7x24 5 * 10/100Mbps auto-negotiation RJ45 ports that support line-speed forwarding and large-capacity cache, ensuring smooth surveillance video playback and stable data transmission for 7x24. Extraordinary heat dissipation A housing made of 0.8 mm galvanized industrial-grade steel plates for excellent durability, heat dissipation performance, ensuring stable switch operation, a long service life, and more reliable outdoor security surveillance. User-friendly design RJ45 ports and LED indicators are located on the same side and aligned vertically for more intuitively showing network status. The RJ45 ports and the power port are designed in the same orientation to reduce the mounting space requirement, allowing the switch to fit into the slimmest outdoor weak current box. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG1128P-24-410W is a gigabit Unmanaged Ethernet PoE switch designed by Tenda. The switch provides 24 gigabit PoE ports, 2 uplink gigabit RJ45 ports and 2 SFP ports. It supports the IEEE 802.3af/at standard and can automatically detect PDs and supply power. The maximum output power of a single port is 30W, and the power of the whole switch is 410W. It supports rack mounting, one-toggle settings, plug and play, and simple networking. It is an ideal choice for SMBs, hotels, schools, and parks with video surveillance and wireless networking requirements. High speed network transmission, Experience extreme smoothness Full gigabit ports , 56 Gbps non-blocking line speed forwarding, mprove the forwarding rate of large files, ensure smooth and stable transmission of large files and HD videos. GE and SFP Uplink Ports, Easier HD Monitoring With two gigabit uplink port and two gigabit uplink optical fiber port, easily complete low-cost remote networking. Smart PoE Power Supply, Stable Transmission Providing 24 100/1000M PoE ports in accordance with the IEEE802.3AF / AT standard, the maximum PoE output of the whole machine is 370W, and of a single port is 30W. It can provide stable power supply and data transmission for HD PoE IP cameras, APs, etc. 4 Modes for More Scenarios, One-key To Change Smart and Easy The switch supports 4 working modes of Standard, VLAN, Priority and Extend, realizing flexible network deployment in complex cases with lowered cost. | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG1120P-16-250W is a gigabit Unmanaged Ethernet PoE switch designed by Tenda. The switch provides 16 gigabit PoE ports, 2 uplink gigabit RJ45 ports and 2 SFP ports. It supports the IEEE 802.3af/at standard and can automatically detect PDs and supply power. The maximum output power of a single port is 30W, and the power of the whole switch is 250W. It supports rack mounting, one-toggle settings, plug and play, and simple networking. It is an ideal choice for SMBs, hotels, schools, and parks with video surveillance and wireless networking requirements. Compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z，IEEE802.3x, IEEE802.3af/at16* 10/100/1000 Base-T Ethernet ports (Data/Power), 2 * 10/100/1000 Base-T Ethernet ports (Data), and 2 * 100/1000 Base-X SFP optical ports8K MAC address and MAC address automatic learningIEEE 802.3x full-duplex flow control and half-duplex backpressure flow control40 Gbps non-blocking wire-speed forwarding backplane bandwidthThe maximum output power of the PoE port is 30 W. The maximum output power of the switch PoE port is 230W.4 Mb large buffer designStandard 1U height, rack mounted switch | Tenda | In Stock | New Sealed Under Guarantee | | |
| | TEG5328P-24-410W is a Tenda Layer-3 managed PoE switch. To meet the demand of high-performance access, the switch provides 24 10/100/1000 Mbps Base-T Ethernet ports and 4 separate 1000 Mbps Base-X SFP ports, and a PoE power of up to 370 W.With an innovative hardware structure and software platform, it features a powerful processing capacity and complete security protection mechanism, making management and maintenance easy and simple, fully meeting the demands of high-density user access and high-performance aggregation, ideal for the aggregation layer or access layer of such medium to large networks as enterprises and campuses. Comply with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1p, IEEE 802.1q, IEEE 802.1w, IEEE 802.1d, IEEE 802.1s, IEEE 802.3af/at standards 24 x 10/100/1000 Base-T Ethernet ports (Data/Power), 4 separate 1000 Base-X SFP ports 16 K MAC address table and MAC address auto-learning Maximum PoE output power of a single port: 30 W, maximum PoE output power of the whole switch: 370 W Supports abundant services, such as static routing, VLAN, IGMP, QoS, ACL, DHCP Snooping, ARP and Telnet Built-in 6 kV professional lightning protection power, 19 inch/1 u standard rack-mounted design | Tenda | In Stock | New Sealed Under Guarantee | | |
| | | Tenda | In Stock | New Sealed Under Guarantee | | |
| | | Tenda | In Stock | New Sealed Under Guarantee | | |
| |
