All
      0
      Cart

      • BAOYILAI

      • Popular
      • Newest
      • Most reviews

      Speclal inspection software diagnostic instrument

      Speclal inspection software diagnostic instrument
      ModelDescriptionBrandLeadingConditionPriceAction
      Speclal inspection software diagnostic instrument
      521732096116
      Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW). 1.Read Identification Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc... 2. Read Fault Codes Displays all stored and pending fault codes with complete description (e.g. 'Rail pressure - too low pressure'). Program supports report printing or copy to clipboard. 3. Clear Fault Codes this function clears all stored fault codes and other diagnostic information. 4. Auto-Scan (Complete Car Scan/Test) Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes. 5. Measured Values Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis. 6. Actuator Test Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..) LEXIA-3/PP2000 Package List: 1pc x Main unit with extension OBD2 cable 1pc x Long 9pin to USB cable 1pc x Short 9pin to USB cable 1pc x OBD2 cable 1pc x Instruction for Installation and Activation DVD for PP2000
      		BAOYILAIIn StockNew Sealed Under Guarantee
      584797487741
      1.It is compatible with Citroen cars including: for C1,for C2,for C3,for C4,for C6,for C8,for C-CROSSER,for NEMO,for BERLINGO,for JUMPY,for JUMPER,for AX,for SAXO,for BX and so on. 2.Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001). LEXIA-3/PP2000 Function: Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW). 1.Read Identification Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc... 2. Read Fault Codes Displays all stored and pending fault codes with complete description (e.g. 'Rail pressure - too low pressure'). Program supports report printing or copy to clipboard. 3. Clear Fault Codes this function clears all stored fault codes and other diagnostic information. 4. Auto-Scan (Complete Car Scan/Test) Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes. 5. Measured Values Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis. 6. Actuator Test Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..) LEXIA-3/PP2000 Package List: 1pc x Main unit with extension OBD2 cable 1pc x Long 9pin to USB cable 1pc x Short 9pin to USB cable 1pc x 16pin to Clip Cable 2pc x DVD for PP2000
      		BAOYILAIIn StockNew Sealed Under Guarantee
      NX600
      VXDIAG VCX NANO is an OEM diagnostic interface for the vehicles of use for Ford and use for Mazda. It can be compatible with OEM software of use for Ford IDS and use for Mazda IDS VCX Nano accord with standard of SAE-J2534(Pass–thru), can be connected with computer through high speed USB2.0 to be compatible with most vehicle’s communication protocols. It will be used widely by car manufactures to make ECU online diagnosis and reprogramming. It also supports the third party and OEM original diagnostic software. VXDIAG VCX NANO For Ford/Mazda OEM diagnostic tool is the update version of for Ford/Mazda VCM2 Scanner.VXDIAG VCX NANO IDS diagnostic tools can work on new and for old Ford and for Mazda till year 2018 with multi-language available and update via CD with firmware unlocked. VXDIAG VCX Nano Function: 1. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.) 2. Live Data-stream with Recording & Playback Functions for Main ECUs 3. Read & Clear Diagnostic Trouble Codes (DTCs) 4. Set, Adjust or Remove Speed Governors 5. Automatic vehicle recognition 6. New Software Re-flash for Existing ECUs 7. All Other Dealer Functions 8. Steering Angle Resets 9. Guided Fault Finding 10. Program New Keys 11. DPF Regeneration 12. Brake Bleeding 13. Injector Coding
      		BAOYILAIIn StockNew Sealed Under Guarantee
      NX601
      VXDIAG VCX NANO is an OEM diagnostic interface for the vehicles of use for Ford and use for Mazda. It can be compatible with OEM software of use for Ford IDS and use for Mazda IDS VCX Nano accord with standard of SAE-J2534(Pass–thru), can be connected with computer through high speed USB2.0 to be compatible with most vehicle’s communication protocols. It will be used widely by car manufactures to make ECU online diagnosis and reprogramming. It also supports the third party and OEM original diagnostic software. VXDIAG VCX NANO For Ford/Mazda OEM diagnostic tool is the update version of for Ford/Mazda VCM2 Scanner.VXDIAG VCX NANO IDS diagnostic tools can work on new and for old Ford and for Mazda till year 2018 with multi-language available and update via CD with firmware unlocked. VXDIAG VCX Nano Function: 1. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.) 2. Live Data-stream with Recording & Playback Functions for Main ECUs 3. Read & Clear Diagnostic Trouble Codes (DTCs) 4. Set, Adjust or Remove Speed Governors 5. Automatic vehicle recognition 6. New Software Re-flash for Existing ECUs 7. All Other Dealer Functions 8. Steering Angle Resets 9. Guided Fault Finding 10. Program New Keys 11. DPF Regeneration 12. Brake Bleeding 13. Injector Coding
      		BAOYILAIIn StockNew Sealed Under Guarantee
      NX602
      VXDIAG VCX NANO is an OEM diagnostic interface for the vehicles of use for Ford and use for Mazda. It can be compatible with OEM software of use for Ford IDS and use for Mazda IDS VCX Nano accord with standard of SAE-J2534(Pass–thru), can be connected with computer through high speed USB2.0 to be compatible with most vehicle’s communication protocols. It will be used widely by car manufactures to make ECU online diagnosis and reprogramming. It also supports the third party and OEM original diagnostic software. VXDIAG VCX NANO For Ford/Mazda OEM diagnostic tool is the update version of for Ford/Mazda VCM2 Scanner.VXDIAG VCX NANO IDS diagnostic tools can work on new and for old Ford and for Mazda till year 2018 with multi-language available and update via CD with firmware unlocked. VXDIAG VCX Nano Function: 1. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.) 2. Live Data-stream with Recording & Playback Functions for Main ECUs 3. Read & Clear Diagnostic Trouble Codes (DTCs) 4. Set, Adjust or Remove Speed Governors 5. Automatic vehicle recognition 6. New Software Re-flash for Existing ECUs 7. All Other Dealer Functions 8. Steering Angle Resets 9. Guided Fault Finding 10. Program New Keys 11. DPF Regeneration 12. Brake Bleeding 13. Injector Coding
      		BAOYILAIIn StockNew Sealed Under Guarantee
      NX400
      VXDIAG VCX NANO is an OEM diagnostic interface for the vehicles of use for Ford and use for Mazda. It can be compatible with OEM software of use for Ford IDS and use for Mazda IDS VCX Nano accord with standard of SAE-J2534(Pass–thru), can be connected with computer through high speed USB2.0 to be compatible with most vehicle’s communication protocols. It will be used widely by car manufactures to make ECU online diagnosis and reprogramming. It also supports the third party and OEM original diagnostic software. VXDIAG VCX NANO For Ford/Mazda OEM diagnostic tool is the update version of for Ford/Mazda VCM2 Scanner.VXDIAG VCX NANO IDS diagnostic tools can work on new and for old Ford and for Mazda till year 2018 with multi-language available and update via CD with firmware unlocked. VXDIAG VCX Nano Function: 1. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.) 2. Live Data-stream with Recording & Playback Functions for Main ECUs 3. Read & Clear Diagnostic Trouble Codes (DTCs) 4. Set, Adjust or Remove Speed Governors 5. Automatic vehicle recognition 6. New Software Re-flash for Existing ECUs 7. All Other Dealer Functions 8. Steering Angle Resets 9. Guided Fault Finding 10. Program New Keys
      		BAOYILAIIn StockNew Sealed Under Guarantee
      NX500
      VXDIAG VCX NANO is an OEM diagnostic interface for the vehicles of use for Ford and use for Mazda. It can be compatible with OEM software of use for Ford IDS and use for Mazda IDS VCX Nano accord with standard of SAE-J2534(Pass–thru), can be connected with computer through high speed USB2.0 to be compatible with most vehicle’s communication protocols. It will be used widely by car manufactures to make ECU online diagnosis and reprogramming. It also supports the third party and OEM original diagnostic software. VXDIAG VCX NANO For Ford/Mazda OEM diagnostic tool is the update version of for Ford/Mazda VCM2 Scanner.VXDIAG VCX NANO IDS diagnostic tools can work on new and for old Ford and for Mazda till year 2018 with multi-language available and update via CD with firmware unlocked. VXDIAG VCX Nano Function: 1. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.) 2. Live Data-stream with Recording & Playback Functions for Main ECUs 3. Read & Clear Diagnostic Trouble Codes (DTCs) 4. Set, Adjust or Remove Speed Governors 5. Automatic vehicle recognition 6. New Software Re-flash for Existing ECUs 7. All Other Dealer Functions 8. Steering Angle Resets 9. Guided Fault Finding 10. Program New Keys
      		BAOYILAIIn StockNew Sealed Under Guarantee
      NX700
      VXDIAG VCX NANO is an OEM diagnostic interface for the vehicles of use for Ford and use for Mazda. It can be compatible with OEM software of use for Ford IDS and use for Mazda IDS VCX Nano accord with standard of SAE-J2534(Pass–thru), can be connected with computer through high speed USB2.0 to be compatible with most vehicle’s communication protocols. It will be used widely by car manufactures to make ECU online diagnosis and reprogramming. It also supports the third party and OEM original diagnostic software. VXDIAG VCX NANO For Ford/Mazda OEM diagnostic tool is the update version of for Ford/Mazda VCM2 Scanner.VXDIAG VCX NANO IDS diagnostic tools can work on new and for old Ford and for Mazda till year 2018 with multi-language available and update via CD with firmware unlocked. VXDIAG VCX Nano Function: 1. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.) 2. Live Data-stream with Recording & Playback Functions for Main ECUs 3. Read & Clear Diagnostic Trouble Codes (DTCs) 4. Set, Adjust or Remove Speed Governors 5. Automatic vehicle recognition 6. New Software Re-flash for Existing ECUs 7. All Other Dealer Functions 8. Steering Angle Resets 9. Guided Fault Finding 10. Program New Keys
      		BAOYILAIIn StockNew Sealed Under Guarantee
      NX800
      VXDIAG VCX NANO is an OEM diagnostic interface for the vehicles of use for Ford and use for Mazda. It can be compatible with OEM software of use for Ford IDS and use for Mazda IDS VCX Nano accord with standard of SAE-J2534(Pass–thru), can be connected with computer through high speed USB2.0 to be compatible with most vehicle’s communication protocols. It will be used widely by car manufactures to make ECU online diagnosis and reprogramming. It also supports the third party and OEM original diagnostic software. VXDIAG VCX NANO For Ford/Mazda OEM diagnostic tool is the update version of for Ford/Mazda VCM2 Scanner.VXDIAG VCX NANO IDS diagnostic tools can work on new and for old Ford and for Mazda till year 2018 with multi-language available and update via CD with firmware unlocked. VXDIAG VCX Nano Function: 1. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.) 2. Live Data-stream with Recording & Playback Functions for Main ECUs 3. Read & Clear Diagnostic Trouble Codes (DTCs) 4. Set, Adjust or Remove Speed Governors 5. Automatic vehicle recognition 6. New Software Re-flash for Existing ECUs 7. All Other Dealer Functions 8. Steering Angle Resets 9. Guided Fault Finding 10. Program New Keys
      		BAOYILAIIn StockNew Sealed Under Guarantee
      VCX SE
      		BAOYILAIIn StockNew Sealed Under Guarantee
      0.706302s