Project

Model/Specification

Wireless standards

5G + WIIFI6 version

Wireless module

Industrial-grade wireless modules

Standard frequency bands

5G NR:n1、n28、n41、n78、n79

LTE:B1、B2、B3、B5、B7、B8、B34、B38、B39、B40、B41

WCDMA：B1、B2、B5、B8

Theoretical rate

NR SA:1.9Gbps（DL）/750Mbps(UL)

NR ENDC:2Gbps（DL）/340Mbps（UL）

LTE :500Mbps（DL）/150Mbps（UL）

WCDMA :42Mbps（DL）/11Mbps（UL）

WIFI6 STANDARD

Wireless standards

Supports IEEE802.11b/g/n/ac/ax

WIFI mode

AP/AP+STA/AP+ bridging

MU-MIMO standard

2×2

Theoretical rate

1201Mbps(5.8GHz) and 573.5Mbps(2.4GHz)

OFDMA

Maximum number of connections

DL-OFDMA 8(8 users)； UL-OFDMA (4 users)

Number of client connections

60+

Distance covered

Outdoor open/unobstructed, covering a radius of up to 200 meters

Indoor office environment/obstacles with a coverage radius of up to 40 meters (subject to environmental influences)

DTU

SOCKET MODE

TCPS/TCPC/UDPS/UDPC/MODBUS/MQTT/HTTP

Heartbeat Pack/Registration Pack

In the tank

RS-485 baud rate

1200/2400/4800/9600/19200/38400/57600/115200/230400 (485 only)

Data bits

7，8

Stop bits

1，2

Check digit

NONE,ODD,EVEN

Serial port type

1*RS232/1*RS485

GNSS positioning (optional)

Antenna specifications

Square antenna, frequency range 1575.42MHz, signal strength 3.5DBI, standard 3 meters

Physical characteristics

Operating temperature

-35℃～ +75℃

Storage temperature

-40℃～+125℃

Operating humidity

5%~95%RH (no condensation)

Store humidity

1%~95%RH (no condensation)

Supply voltage

DC 9-36V

Adapter

12V/3A

Current consumption

5G+WIFI6 version: under DC12V power supply, the average current is 1.5A, and the maximum current is 2A

WIFI6 version: under DC12V power supply, the average current is 600mA, and the maximum current is 1.1A

Size

161.5*138.5*49.0mm (L*W*H, excluding rail mounting ears, antenna holder and mounting parts)

Installation:

Rail-mounted, wall-mounted, and horizontally tabletop mounted

EMC rating

Level 3

Hardware interfaces

Ethernet port

1*WAN/LAN+3*LAN

RJ45 interface: 10/100/1000Mbps self-adaptive, in line with IEEE 802.3

It has 1.5KV network isolation transformer protection

SIM card interface

5G + WIIFI6 version

2 * (3 V/1.8 V) standard self-popping SIM card slot (SIM card 2 can be optionally configured as built-in eSIM)

5G antenna interface: 5G+WIIFI6 version

4 * Standard SMA-K interface (outer spiral inner hole)

Wi-Fi antenna interface

2 * Standard SMA-K interface (outer spiral inner hole)

4 antennas (optional function)

GPS antenna interface

Optional features

1 * Standard SMA-K interface (outer screw inner hole)

Light

5G+WIFI6: PWR, WORK, NET, SIG, WLAN, USR, GNSS (optional)

WIFI6 version: PWR, WORK, WLAN, USR, GNSS (optional)

Power connector

DC power supply: cartridge type 5.5*2.1mm round socket or industrial terminal power supply, with reverse polarity protection

Terminal interface

GND TX Rx: RS232 interface

A B: RS485 interface

Reload button

Press and hold for 3-15s to release and restore to the factory

TBD interface

Debug interfaces

Grounding protection

Grounding screws